Opening your dashboard
Class 12 Chemistry Chapter 6 Haloalkanes and Haloarenes: Competency-Based Questions (CBQ)
80 questions on Chapter 6, each worked through on its own page with the AI tutor. Class 12 Chemistry, CBSE 2026-27.
80 questions
1–4 marks · Mixed difficulty
- 11 mark
Question 1
A student predicted the main mechanism by which each halide below is hydrolysed, and gave a reason for each prediction.
Row Halide Predicted mechanism Reason given P only three small H atoms on the carbon, so backside attack is easy Q the carbocation formed is stabilised by three methyl groups R (in water) the benzylic carbocation formed is stabilised by resonance with the ring S the carbocation formed is stabilised by the attached ethyl group In which row is the prediction or its reason wrong?
- 21 mark
Question 2
3-Bromo-2-methylpentane, , is heated with alcoholic KOH. What is the major organic product?
- 31 mark
Question 3
Each of the bromides below is converted into its Grignard reagent with magnesium in dry ether, and the reagent is then treated with water. Which pair of bromides gives the same hydrocarbon?
- 41 mark
Question 4
Four liquids are each shaken with an equal volume of water in a separating funnel and left to stand. The organic liquid is insoluble in water in every case. In which funnel does the organic liquid form the upper layer?
- 51 mark
Question 5
The haloalkane below has a four-carbon chain carrying two different halogen atoms and a methyl branch.

Which name follows the IUPAC rules for this compound?
- 61 mark
Question 6
Study the four halides shown below.

Which option classifies all four correctly?
- 71 mark
Question 7
Bromoethane is treated separately with potassium nitrite () and with silver nitrite (). The two products, X from and Y from , both have the formula . Which statement is correct?
- 81 mark
Question 8
A chemist needs pure 4-chlorotoluene (1-chloro-4-methylbenzene), free from any other isomer. Which route should be chosen?
- 92 marks
Question 9
2-Bromo-2-methylpropane (tert-butyl bromide) reacts with ammonia to give an amine.
(i) Show the mechanism of this reaction and name the organic product. [1]
(ii) 3-Bromo-3-methylhexane is also a tertiary bromide, but its C-3 is a chiral centre. An optically active sample of it is treated with ammonia in the same way. Will the amine formed be optically active? Explain from the mechanism. [1]
- 104 marks
Question 10
Read the passage and answer the questions that follow.
Chloroform () is used as a solvent for fats, alkaloids and iodine, and its major use today is in making the refrigerant freon R-22. It was once used as a general anaesthetic but was replaced by safer anaesthetics. In the presence of light, chloroform is slowly oxidised by the oxygen of air to carbonyl chloride (, phosgene), an extremely poisonous gas, together with hydrogen chloride. For this reason chloroform is stored in closed, dark-coloured bottles that are filled completely.
(i) Write the balanced equation for the oxidation of chloroform described in the passage. [1]
(ii) Explain why the bottle must be both dark coloured and filled to the top. [1]
(iii) A few drops of an old sample of chloroform are shaken with silver nitrate solution, and a white precipitate forms. A freshly distilled sample gives no precipitate. What does this show?
(A) Pure chloroform gives ions readily, and the old sample has lost its chlorine. (B) The old sample contains HCl from oxidation, which supplies free ions to form AgCl. (C) Phosgene is a white solid. (D) The old sample has absorbed from the air. [1]
(iv) A bottle containing 11.94 g of chloroform was left open in sunlight until the chloroform was completely oxidised. Calculate the mass of phosgene formed. (Given molar masses: and .) [1]
- 113 marks
Question 11
When 1-bromo-2-methylpropane, , is heated with aqueous NaOH, it gives 2-methylpropan-1-ol. Nanda proposed the following:
- Mechanism: Step 1 (slow): . Step 2 (fast): .
- Rate law:
- Prediction: 1-chloro-2-methylpropane would react faster than the bromide under the same conditions, because chlorine is more electronegative than bromine.
Identify the mistake in each of Nanda's three statements and correct it.
- 122 marks
Question 12
Study the two compounds shown below.

For each compound: (i) write the IUPAC name, and (ii) classify the halide as , or and as alkyl, allylic, vinylic or benzylic, giving a reason.
- 133 marks
Question 13
Bromobenzene is treated with bromoethane in the presence of anhydrous :

(i) Identify P and Q and give their IUPAC names. [1]
(ii) Which of them is the major product? Explain why. [1]
(iii) Would this reaction be faster or slower than the same reaction with benzene? Give a reason. [1]
- 142 marks
Question 14
Chloroethane is needed in bulk. It can be made either from ethane or from ethene:

Which starting material would you choose? Justify your choice by comparing the products of the two reactions.
- 153 marks
Question 15
2.46 g of 1-bromopropane is converted completely into its Grignard reagent with magnesium in dry ether, and the reagent is then treated with excess water.
(i) Write equations for the two reactions and name the organic product of the second one. [1]
(ii) Calculate the volume of this product at STP. (Given: molar mass of 1-bromopropane = 123 g mol; molar volume at STP = 22.4 L mol.) [1]
(iii) Why must the first step be carried out in dry ether? What would you obtain if ethanol were used as the solvent instead? [1]
- 161 mark
Question 16
A student claims that (2-bromoethyl)benzene, , is a benzylic halide and should therefore react as fast as benzyl bromide, , in an reaction. Is the student right? Explain.
- 171 mark
Question 17
To prepare a Grignard reagent, Udita mixes magnesium metal in dry ether with the compound . Will she obtain the Grignard reagent? Justify your answer.
- 183 marks
Question 18
The table shows what happens when aqueous silver nitrate is added to two bromine compounds at room temperature.
Compound Observation with aqueous sodium bromide pale yellow precipitate appears immediately 1-bromobutane no change at first; a faint pale yellow precipitate appears after several minutes (i) Why does 1-bromobutane give no immediate precipitate? [1]
(ii) Explain why a precipitate appears after several minutes. [1]
(iii) Predict how 2-bromo-2-methylpropane would behave under the same conditions compared with 1-bromobutane. Give a reason. [1]
- 192 marks
Question 19
The table gives molar masses and boiling points (literature values) of three compounds.
Compound Molar mass / g mol Boiling point / K ethane, 30 185 butane, 58 273 chloroethane, 64.5 285 (a) Give two reasons why chloroethane boils about 100 K higher than ethane.
(b) Butane and chloroethane have similar molar masses, yet chloroethane boils higher. Which of your two reasons in (a) accounts for this difference? Explain.
- 201 mark
Question 20
The two geometrical isomers of 1,2-dichloroethene, , contain exactly the same bonds and have the same molar mass, yet their dipole moments are very different:
Isomer Dipole moment / D cis-1,2-dichloroethene 1.90 trans-1,2-dichloroethene 0 Which statement correctly explains these data?
- 211 mark
Question 21
A benzene ring carries three substituents (methyl, chloro and bromo), arranged as drawn:

Choosing the lowest set of locants first, which option gives its correct name?
- 221 mark
Question 22
A laboratory has only 1-bromopropane and must prepare (i) 1-iodopropane and (ii) 1-fluoropropane from it. Which plan will work, with the correct reason?
- 231 mark
Question 23
Chlorobenzene and bromobenzene are made by treating benzene with or in the presence of iron or iron(III) chloride. A student wants to make fluorobenzene and iodobenzene in the same way. Which statement correctly explains what happens?
- 241 mark
Question 24
Which option lists the following compounds in increasing order of boiling point?
1-chlorobutane, 1-bromobutane, 2-bromobutane, 1-iodobutane
- 251 mark
Question 25
The hydrolysis of 2-bromo-2-methylpropane by hydroxide ions in aqueous solution follows the mechanism. The initial rate is when and . What is the initial rate when and , at the same temperature?
- 263 marks
Question 26
In the presence of light, chloroform is slowly oxidised by air:
Chloroform for laboratory use is kept in dark bottles filled to the top, and it also contains about 1 % of ethanol, which converts any phosgene () formed into harmless diethyl carbonate, . NCERT notes that in the body chloroform is metabolised in the liver to phosgene, and that breathing about 900 parts of chloroform vapour per million parts of air for a short time causes dizziness, fatigue and headache.
(a) Write the balanced equation for the reaction of phosgene with ethanol. Explain why adding ethanol does not make the dark, completely filled bottle unnecessary. [1]
(b) A worker regularly handles freshly distilled chloroform that contains no phosgene at all. Explain why long exposure can still damage the worker's liver. [1]
(c) A bottle of chloroform is spilt in a closed store room of volume 40.0 m³ at 298 K and 1 atm. What volume of liquid chloroform must evaporate to bring the air to 900 parts per million by volume? (Molar volume of a gas at 298 K and 1 atm = 24.5 L mol⁻¹; = 119.4 g mol⁻¹; density of liquid chloroform = 1.48 g mL⁻¹.) [1]
- 274 marks
Question 27
Read the passage and answer the questions that follow.
The –OH group of an alcohol can be replaced by a halogen using concentrated halogen acids, phosphorus halides or thionyl chloride. A chemist has 2-methylpropan-2-ol, butan-1-ol, butan-2-ol and phenol. When 2-methylpropan-2-ol is simply shaken with concentrated HCl at room temperature, an oily layer of 2-chloro-2-methylpropane separates within minutes. Butan-1-ol shows no change under the same conditions; it is converted into 1-chlorobutane only when it is heated with concentrated HCl in the presence of anhydrous .
(i) In both alcohols the C–O bond breaks after the –OH group is protonated. Explain, in terms of the intermediate formed, why the tertiary alcohol reacts so much more readily than butan-1-ol. [1]
(ii) Arrange the three butanols (2-methylpropan-2-ol, butan-1-ol and butan-2-ol) in decreasing order of reactivity towards concentrated HCl, and predict whether butan-2-ol would react on simple shaking at room temperature. Give a reason. [1]
(iii) Why cannot chlorobenzene be prepared by treating phenol with HCl in the same way?
(A) Phenol is a gas. (B) The C–O bond in phenol has partial double bond character and is too strong to break. (C) Phenol has no lone pair on oxygen. (D) Chlorobenzene reacts with HCl as soon as it forms. [1]
(iv) The 2-chloro-2-methylpropane formed from 2-methylpropan-2-ol is warmed with aqueous NaOH. State the mechanism of this hydrolysis and write its rate law. [1]
- 282 marks
Question 28
A student named two haloalkanes as (a) 2-ethyl-1-chloropropane and (b) 4-bromo-2-methylbutane. Draw the structure the student meant in each case, explain what is wrong with each name, and give the correct IUPAC name.
- 292 marks
Question 29
The table gives literature values for the three dichlorobenzenes.
Isomer Boiling point / K Melting point / K 1,2-dichlorobenzene 454 256 1,3-dichlorobenzene 446 248 1,4-dichlorobenzene 447 327 (a) The three isomers have the same molar mass, yet the 1,2-isomer boils about 7–8 K higher than the other two. Use the orientation of the two C–Cl bonds to explain this.
(b) Chlorination of chlorobenzene gives a mixture of the 1,2- and 1,4-isomers. Use the data to suggest how the 1,4-isomer can be separated at room temperature (298 K).
- 302 marks
Question 30
Four isomers of are heated separately with alcoholic KOH: 1-bromopentane, 2-bromopentane, 3-bromopentane and 2-bromo-2-methylbutane.
(a) Which of them give only one alkene? (Ignore cis–trans isomers.) Explain.
(b) For each of the others, name the major alkene and state the rule used.
- 311 mark
Question 31
Assertion (A): Under the same conditions, chlorination of chlorobenzene with and anhydrous is slower than chlorination of benzene.
Reason (R): The effect of chlorine withdraws electron density from the ring more strongly than its effect releases it, so the ring is less attractive to an electrophile.
- 321 mark
Question 32
Assertion (A): 2-Bromopropane gives mainly propan-2-ol when warmed with aqueous KOH, but mainly propene when heated with alcoholic KOH.
Reason (R): The C–Br bond is polar, with a partial positive charge on carbon and a partial negative charge on bromine.
- 331 mark
Question 33
Freon-12, , was chosen as a refrigerant because it is extremely stable, unreactive, non-toxic, non-corrosive and easily liquefied. Which statement correctly links these properties to its effect on the environment?
- 342 marks
Question 34
A student wanted to make butanenitrile, , by heating 1-bromopropane with a metal cyanide. She obtained an isomer of the expected product instead, with a very unpleasant smell.
(a) Which reagent did she use by mistake, which should she have used, and what did she actually obtain?
(b) Explain why the two cyanides give different products, although both contain cyanide.
- 352 marks
Question 35
Iodoform, , was once used as an antiseptic dusting powder for wounds.
(a) Calculate the percentage by mass of iodine in iodoform. [Atomic masses: C = 12.0, H = 1.0, I = 126.9]
(b) Explain why the antiseptic action of iodoform is attributed to iodine and not to the iodoform molecule itself, and why iodoform has since been replaced.
- 362 marks
Question 36
A student has to prepare 1-chloro-3-nitrobenzene from benzene in two steps, using and a mixture of concentrated and .
(a) In which order should the two steps be carried out? Write the equations and explain the choice.
(b) What would be obtained if the steps were done in the other order? Why?
- 372 marks
Question 37
Benzenediazonium chloride is used to prepare chlorobenzene, bromobenzene and iodobenzene.
(a) Name the reagent needed in each case and write the equation for the preparation of iodobenzene.
(b) Chloride and bromide need a copper(I) salt in these reactions, but iodide does not. Suggest a reason.
- 382 marks
Question 38
Predict which of 1-bromo-1-phenylethane, , and 2-bromopropane, , undergoes hydrolysis faster. Justify your answer.
- 394 marks
Question 39
Read the passage and answer the questions that follow.
A student warms four chlorides, P, Q, R and S, separately with a solution of silver nitrate in aqueous ethanol. Any chloride ion released by hydrolysis of the C–Cl bond is precipitated at once as white AgCl.

Chloride Observation P a precipitate forms slowly, only on prolonged warming Q a white precipitate forms within a minute R no precipitate, even on prolonged warming S no precipitate, even on prolonged warming (i) Which option classifies Q and R correctly?
(A) Q vinylic, R allylic (B) Q allylic, R vinylic (C) both allylic (D) both vinylic [1]
(ii) Explain why Q reacts much faster than P, although both are primary chlorides. [1]
(iii) Give two reasons why R and S give no precipitate. [1]
(iv) If benzyl chloride, , were tested in the same way, it would behave most like:
(A) S (B) R (C) Q (D) none of them, since it would never react [1]
- 402 marks
Question 40
2-Bromobutane can be prepared by adding HBr either to but-1-ene or to but-2-ene. Which alkene would you choose to obtain 2-bromobutane free from any isomeric bromide? Justify your answer with equations.
- 411 mark
Question 41
Consider the following statements about nucleophilic substitution. Each one compares two halides under the same conditions.
- undergoes faster than .
- undergoes faster than .
- undergoes faster than .
- For the same alkyl group, the iodide reacts faster than the chloride whether the mechanism is or .
- undergoes more slowly than .
- undergoes more slowly than .
How many of these statements are correct?
- 421 mark
Question 42
An alkane of formula gives only two structurally isomeric monochlorides, X and Y, when it is chlorinated in bright sunlight. X is optically active; Y is optically inactive.
X and Y are heated separately with alcoholic KOH. Which option correctly gives the major alkene obtained from each?
- 431 mark
Question 43
A bromoalkane X (), heated with sodium in dry ether, gives 2,7-dimethyloctane as the only hydrocarbon.
Which option correctly identifies X and the alkene obtained when X is heated with alcoholic KOH?
- 441 mark
Question 44
A student plans to convert 2-bromobutane into 1-bromobutane in two steps:
Which statement best describes what actually happens?
- 451 mark
Question 45
Assertion (A): 3-Bromoprop-1-ene () is hydrolysed by the route much faster than 1-bromopropane, although both are primary bromides.
Reason (R): In 3-bromoprop-1-ene, the C–Br bond acquires partial double-bond character by resonance with the C=C bond.
- 462 marks
Question 46
1-Bromo-2,2-dimethylpropane, , is a primary bromide, yet it reacts extremely slowly under both of the following conditions.
(a) With in an reaction, it reacts far more slowly than 1-bromopropane, which is also primary. Explain why. [1]
(b) In warm aqueous ethanol (an condition) it is still very slow, whereas its isomer 2-bromo-2-methylbutane reacts rapidly. Explain why. Also state what happens when 1-bromo-2,2-dimethylpropane is heated with alcoholic KOH, and why. [1]
- 474 marks
Question 47
Read the passage and answer the questions that follow.
Three isomeric bromoalkanes P, Q and T, each , were studied.
- Each forms a Grignard reagent in dry ether. With water, all three Grignard reagents give the same alkane S.
- P is optically inactive. In warm aqueous ethanol it is hydrolysed much faster than Q or T.
- Q and T are both optically active.
- When heated with alcoholic KOH, P and Q give the same major alkene R, but each gives a different minor alkene. T gives only one alkene.
(i) Identify S. Name all the isomers whose Grignard reagents would give S, and show why no other carbon skeleton fits the data. [1]
(ii) Identify P and Q, giving one reason for each. [1]
(iii) Name R and the minor alkene from each of P and Q. State the rule that makes R the major product. [1]
(iv) Identify T and name the only alkene it gives. Explain why T cannot give a second alkene. [1]
- 483 marks
Question 48
3.02 g of a monobromoalkane X, , is converted completely into its Grignard reagent. On treatment with water, this gives 1.44 g of an alkane. X is a secondary bromide and is optically inactive. (Use C = 12, H = 1, Br = 80 g mol⁻¹.)
(i) Find the value of . [1]
(ii) Identify X, explaining why every other secondary isomer is ruled out. [1]
(iii) Name the organic product formed when X is (a) heated with alcoholic KOH and (b) treated with sodium in dry ether. For (a), explain why only one structural alkene forms. [1]
- 493 marks
Question 49
Four bromides, P, Q, R and S, all contain a six-membered carbon ring:
P: bromocyclohexane Q: 1-bromo-1-methylcyclohexane R: (bromomethyl)cyclohexane S: 1-bromocyclohexene

(i) Arrange P, Q, R and S in decreasing order of reactivity towards hydrolysis in aqueous ethanol. Justify the order. [1]
(ii) Arrange them in decreasing order of reactivity towards substitution by . Justify the order. [1]
(iii) Among the three bromides, two swap their places at the top and bottom of the and lists, but one compound is last in both lists. Name that compound and give two structural reasons for its inertness. [1]
- 503 marks
Question 50
A chemist has only propan-1-ol as the organic starting material and wants to make 2-methylpropanenitrile, . The target has four carbon atoms and the functional group sits on the middle carbon of the original three-carbon chain.
(i) Design a four-step route using reactions from this chapter. Write each step with its reagent and condition, and name every intermediate. [2]
(ii) Justify the choice of reagent in three of the steps: (a) why thionyl chloride is preferred in step 1; (b) why HBr must be added without peroxide in step 3; (c) why KCN, and not AgCN, is used in step 4. [1]
- 514 marks
Question 51
Read the passage and answer the questions that follow.
A, B and C are three isomers of formula . Each contains one benzene ring.
- A is optically active and is hydrolysed faster than B or C in warm aqueous ethanol.
- B is optically inactive. It is hydrolysed more slowly than A.
- When heated with alcoholic KOH, A and B both give the same hydrocarbon D, .
- C is not affected by boiling aqueous NaOH or by alcoholic KOH. The two groups on its ring are para to each other.
- The Grignard reagents of A, B and C, on treatment with water, all give the same hydrocarbon E, .
(i) Identify E and D. [1]
(ii) Identify A and B. Classify the C–Br carbon in each, and show why a methylbenzyl bromide such as cannot be B. [1]
(iii) Identify C and give two reasons why its bromine is not replaced by boiling aqueous NaOH. [1]
(iv) Arrange A, B and C in decreasing order of reactivity. Explain why A reacts faster than B. [1]
- 523 marks
Question 52
2-Methoxypropane, , is to be made by the reaction of an alkyl halide with a sodium alkoxide (NCERT Table 6.4: ). The only organic starting materials are methanol and propan-2-ol.
(i) Write the two possible halide + alkoxide pairings that could give 2-methoxypropane. [1]
(ii) Which pairing gives the better yield of the ether? Name the main side product of the other pairing and explain why it forms. [1]
(iii) Write the complete route for the better pairing, starting from the two alcohols, with reagents for every step. [1]
- 532 marks
Question 53
P is an optically active compound of formula that contains one benzene ring.
- With sodium in dry ether, P gives a hydrocarbon of formula .
- With alcoholic KOH, P gives a single alkene Q, (no structural isomer of Q is formed). Q adds over Ni to give propylbenzene, .
- With aqueous KOH, P is hydrolysed quickly to an alcohol R. Each molecule of R is chiral, yet the product R shows no optical rotation.
(a) Deduce the structure and IUPAC name of P. Show why the other optically active bromide with the propylbenzene skeleton does not fit, and write balanced equations for the reactions of P with Na, with alcoholic KOH and with aqueous KOH. [1]
(b) Explain why R is optically inactive although P was optically active. [1]
- 544 marks
Question 54
Read the passage and answer the questions that follow.
A dye intermediate is made from benzene by the sequence below. C has the formula , D has the formula , and E has the formula .
(i) Identify A and B. Why is B mainly the para compound? [1]
(ii) Identify C. Why does the second chlorine go into the side chain and not onto the ring? [1]
(iii) Identify D. Explain why only one of the two chlorine atoms of C is replaced. [1]
(iv) Identify and name E. Which reactive feature of C makes this step possible? [1]
- 551 mark
Question 55
A compound X, , contains a benzene ring. Its chlorine is not replaced even on prolonged boiling with aqueous NaOH. When X is treated with chloromethane and sodium in dry ether, it gives the hydrocarbon Y, . On ring nitration, Y gives three different mononitro products.
What is X?
- 561 mark
Question 56
Consider the sequence:
Which option correctly identifies C and D?
- 571 mark
Question 57
Consider these four bromides:
Which one reacts fastest by and also slowest by among them?
- 581 mark
Question 58
Starting from 2-methylpropene, a student must prepare (i) 2-methylpropan-1-ol and (ii) 2-methylpropan-2-ol, each in two steps.
Which option gives a correct two-step route for both targets?
- 591 mark
Question 59
An unsaturated chloride X, , is optically active. When warmed with water, it is hydrolysed rapidly by the route.
Which of the following is X?
- 601 mark
Question 60
Freon-12, , is to be made from methane in two stages. Which option gives a workable route and the correct reason for the way fluorine is introduced?
- 612 marks
Question 61
An optically active sample of 2-iodooctane is dissolved in dry acetone containing sodium iodide in which some of the iodide ions are radioactive (). No new compound is formed, yet the optical rotation of the solution slowly falls to zero.
At the start of the experiment, measured in the same units (mol of 2-iodooctane per litre per second), the rate at which optical activity is lost is found to be exactly twice the rate at which radioactive iodine enters the organic compound.
(a) Why does the solution lose its optical activity although the only organic compound present at the end is still 2-iodooctane? [1]
(b) What does the factor of exactly 2 prove about the stereochemistry of each substitution event? [1]
- 622 marks
Question 62
A sample of optically pure 2-bromobutane is divided into two equal portions.
- Route I: portion 1 is treated with concentrated aqueous NaOH, giving butan-2-ol A.
- Route II: portion 2 is first treated with NaI in dry acetone, and the 2-iodobutane formed is then treated with concentrated aqueous NaOH, giving butan-2-ol B.
Assume that every step goes entirely by the mechanism and that each molecule undergoes only one substitution in each step.
(a) Compare the configuration at C-2 of A and of B with that of the starting bromide. [1]
(b) How are A and B related, and what is the optical rotation of a mixture of equal amounts of A and B? [1]
- 632 marks
Question 63
1,4-Dichloro-2-nitrobenzene is heated with aqueous NaOH at 443 K and the solution is then acidified. Only one of the two chlorine atoms is replaced by –OH.
(a) Write the structure and IUPAC name of the product. [1]
(b) Explain, using the intermediate formed when adds to the ring, why the other chlorine atom survives these conditions. [1]
- 642 marks
Question 64
NCERT Table 6.2 gives these carbon–halogen bond enthalpies:
Bond C–F C–Cl C–Br C–I Bond enthalpy / kJ mol⁻¹ 452 351 293 234 (a) In the Finkelstein reaction , a C–Cl bond is replaced by a C–I bond. Use the table to say whether the change in C–X bonding alone favours this reaction, and explain why the reaction still goes almost to completion. [1]
(b) For the Swarts reaction , what does the same comparison show? Using the table, explain why the product is the least reactive methyl halide towards nucleophiles. [1]
- 651 mark
Question 65
Assertion (A): A –NO group makes chlorobenzene react more slowly with electrophiles, but when it is placed ortho or para to the chlorine it makes chlorobenzene react much faster with nucleophiles such as .
Reason (R): Electrophilic attack gives a positively charged intermediate, which electron withdrawal by –NO destabilises, whereas nucleophilic attack gives a negatively charged intermediate (carbanion), which an ortho or para –NO group stabilises by resonance.
- 662 marks
Question 66
A student prepares 2-bromobutane by passing HBr gas into but-1-ene. She then heats the 2-bromobutane with concentrated aqueous NaOH, a reaction that goes by with inversion of configuration. Since both 2-bromobutane and butan-2-ol contain a stereocentre, she expects an optically active alcohol, but the polarimeter shows zero rotation at both stages.
(a) Explain why the 2-bromobutane she made is optically inactive. [1]
(b) Explain why the step, although it inverts the configuration, does not give an optically active butan-2-ol. [1]
- 674 marks
Question 67
Read the passage and answer the questions that follow.
NCERT Table 6.2 lists these data for the methyl halides:
Compound C–X bond length / pm C–X bond enthalpy / kJ mol⁻¹ Dipole moment / D 139 452 1.847 178 351 1.860 193 293 1.830 214 234 1.636 If the C–X bond is treated as two charges and separated by the bond length , then , where is the fractional charge. Take C m and C. Worked this way, is 0.218 for and 0.197 for .
(i) Calculate for . [1]
(ii) Calculate for , and state how changes from F to I and why. [1]
(iii) has the largest dipole moment although has the larger . The best explanation is: (A) chlorine is more electronegative than fluorine (B) the C–Cl bond is about 28% longer than the C–F bond, which just outweighs its about 21% smaller (C) forms hydrogen bonds that cancel part of its dipole (D) fluorine's lone pairs are donated back to carbon, reversing the C–F dipole [1]
(iv) Towards nucleophilic substitution the reactivity is . Which column of the table follows the same order? (A) dipole moment (B) fractional charge (C) bond enthalpy (D) none of them [1]
- 682 marks
Question 68
The three isomeric dichlorobenzenes P, Q and R have these dipole moments: P = 2.50 D, Q = 0 D, R = 1.72 D.
Treat each C–Cl bond moment in the ring as 1.70 D (close to the dipole moment of chlorobenzene, 1.69 D), and use the rule that two equal moments at an angle give a resultant .
(a) Identify P, Q and R as the ortho, meta or para isomer, showing the calculation. [1]
(b) The observed moment of one isomer is well below the value this simple model predicts. Which isomer is it, and why does the model fail for it? [1]
- 692 marks
Question 69
A student plans to make the nitrile by heating 2-bromo-2-methylpropane with sodium cyanide in aqueous ethanol. Almost no nitrile is obtained; the main organic product is a gas that decolourises bromine water.
(a) Identify the gas, write a balanced equation for its formation, and explain why the cyanide ion reacts in this way with this halide, so that the tertiary nitrile cannot be made by this method. [1]
(b) The isomeric bromide 1-bromo-2-methylpropane, , heated with NaCN under the same conditions gives a nitrile in good yield. Name this nitrile and explain the difference in behaviour. [1]
- 701 mark
Question 70
Reactions I and II are the hydrolysis of 2-bromo-2-methylpropane and of bromomethane by aqueous , not necessarily in that order. Their energy profiles are drawn below.

Which statement is correct?
- 711 mark
Question 71
In NCERT's explanation of nucleophilic substitution in nitrochlorobenzenes, adds to the carbon carrying the chlorine (C-1). This gives a negatively charged intermediate (a carbanion) whose charge is spread over the ring by resonance.
Compare 1-chloro-4-nitrobenzene with 1-chloro-3-nitrobenzene. Which statement is correct?
- 721 mark
Question 72
Consider two reactions described in NCERT:
- I: (–)-2-methylbutan-1-ol (+)-1-chloro-2-methylbutane
- II: (–)-2-bromooctane (+)-octan-2-ol
A student argues that because the sign of rotation changes from (–) to (+) in both, both reactions must invert the configuration at the stereocentre. Which statement is correct?
- 731 mark
Question 73
Three optically pure bromides are each treated with concentrated aqueous NaOH under identical conditions, and in each case the alcohol formed is isolated:
- I: 2-bromooctane,
- II: 1-bromo-1-phenylethane,
- III: 3-bromo-3-methylhexane,
Which bromide gives the alcohol with the highest optical purity, and why?
- 741 mark
Question 74
2-Bromo-2-methylpropane is hydrolysed in a mixture of water and ethanol. Two observations are made:
- Doubling the concentration of has no effect on the rate.
- The reaction becomes faster when the proportion of water in the solvent is increased.
Which statement explains both observations?
- 751 mark
Question 75
Data for three chlorine compounds:
Compound C–Cl bond length / pm Dipole moment / D Chloroethane, 177 2.05 Chloroethene, 173 1.45 Chlorobenzene, 169 1.69 Which conclusion is justified?
- 761 mark
Question 76
Chlorobenzene is nitrated with a mixture of concentrated and concentrated . The whole crude mononitro product is then heated with aqueous NaOH at 443 K, and the solution is acidified.
Which option correctly describes the organic products after acidification?
- 774 marks
Question 77
Read the passage and answer the questions that follow.
NCERT gives the conditions needed to replace the chlorine atom by –OH in these four haloarenes:

Compound Conditions for Cl → OH W, chlorobenzene aqueous NaOH, 623 K, 300 atm, then X, 1-chloro-4-nitrobenzene aqueous NaOH, 443 K, then Y, 1-chloro-2,4-dinitrobenzene aqueous NaOH, 368 K, then Z, 2-chloro-1,3,5-trinitrobenzene warm water, 322 K (i) The steady fall in the temperature needed from W to Z is best explained by: (A) each –NO group pushes electrons into the ring and weakens the C–Cl bond (B) each –NO group ortho or para to Cl gives one more place where the negative charge of the intermediate can be spread onto oxygen atoms (C) each –NO group stabilises the phenyl cation, making easier (D) the –NO groups lengthen the C–Cl bond by steric crowding [1]
(ii) Name the product formed from Z, and explain why water alone is a strong enough nucleophile for Z. [1]
(iii) Why must the reaction of W at 623 K be carried out under a pressure of 300 atm, and why does Y need neither a high temperature nor a high pressure? [1]
(iv) Why must the reaction mixture be acidified to obtain the phenol from W, X and Y, but not from Z? [1]
- 783 marks
Question 78
Two optically active bromides were hydrolysed separately with aqueous NaOH at the same temperature:
- P = 2-bromo-2-phenylbutane,
- Q = 2-bromopentane,
Expt Bromide [RBr] / mol L⁻¹ [OH⁻] / mol L⁻¹ Initial rate / mol L⁻¹ s⁻¹ 1 P 0.010 0.010 2 P 0.020 0.010 3 P 0.010 0.020 4 Q 0.010 0.010 5 Q 0.020 0.010 6 Q 0.010 0.020 (a) Deduce the rate law for each bromide and calculate each rate constant with its unit. [1]
(b) Name the mechanism followed by each bromide and explain, from the structure of P, why it follows its mechanism. [1]
(c) Predict whether the alcohol obtained from each bromide is optically active. Justify. [1]
- 794 marks
Question 79
Read the passage and answer the questions that follow.
NCERT describes the conversion of (–)-2-bromooctane into (+)-octan-2-ol with inversion of configuration. In a polarimeter, under identical conditions (same tube, same concentration, same temperature):
- optically pure (–)-2-bromooctane gives a rotation of ;
- optically pure (+)-octan-2-ol gives a rotation of .
For any sample, optical purity = (observed rotation) ÷ (rotation of the pure enantiomer), and the percentage of the major enantiomer is .
A chemist's sample of 2-bromooctane rotates by . It is converted completely into octan-2-ol with aqueous NaOH, and the alcohol, measured under the same conditions, rotates by . Assume that the part of the reaction going by gives complete inversion, the part going by gives complete racemisation, and no elimination occurs.
(i) Calculate the percentage of each enantiomer in the bromide sample. [1]
(ii) Calculate the percentage of each enantiomer in the octan-2-ol formed. [1]
(iii) Calculate the percentage of the bromide that reacted by . [1]
(iv) If the same bromide sample had reacted entirely by , the alcohol would have rotated by: (A) (B) (C) (D) [1]
- 804 marks
Question 80
Read the passage and answer the questions that follow.
A laboratory has two optically active bromides: P, 2-bromobutane, , and Q, 1-bromo-2-methylbutane, . Four experiments are carried out. For each, name the main organic product and decide whether the product obtained is optically active, giving a reason.
(i) P is treated with silver ethanoate, , under conditions where the reaction goes by . [1]
(ii) P is heated with alcoholic KOH. [1]
(iii) P is converted into its Grignard reagent with Mg in dry ether, and water is then added. [1]
(iv) Q is treated with NaI in dry acetone. [1]
