Confirming your payment

Skip to content

Opening your dashboard

Class 11 Physics Chapter 14 Waves: Competency-Based Questions (CBQ)

80 questions on Chapter 14, each worked through on its own page with the AI tutor. Class 11 Physics, CBSE 2026-27.

80 questions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    A vibrator at one end of a long stretched rubber cord sends a wave along it. A data logger fitted to the cord reports the displacement as

    y(x,t)=0.03sin⁡(5πx+150πt)y(x, t) = 0.03\sin(5\pi x + 150\pi t)

    with xx and yy in metres and tt in seconds. In which direction is the vibrator's wave travelling, and how fast?

    MCQMedium
    1 mark
  2. 2

    Question 2

    A long rope is shaken so that a harmonic wave travels along it in the +x+x direction. A photograph taken at one instant shows the shape below, with four marked points P, Q, R and S.

    Class 11 Physics Waves

    At the instant of the photograph, which marked point is moving downwards?

    MCQMedium
    1 mark
  3. 3

    Question 3

    An engineer tests a gas-filled duct in which sound travels at 300 m s−1300\ \text{m s}^{-1}. A loudspeaker at one end produces a steady 500 Hz500\ \text{Hz} tone, and two small microphones are placed along the duct, 15 cm15\ \text{cm} apart in the direction of travel. What is the phase difference between the signals picked up by the two microphones?

    MCQMedium
    1 mark
  4. 4

    Question 4

    A vibrator drives a transverse wave of frequency 125 Hz125\ \text{Hz} along a long string, and the wave travels at 40 m s−140\ \text{m s}^{-1} in the +x+x direction. A high-speed camera films two marked beads: bead A, and bead B, which is 5.0 cm5.0\ \text{cm} further along in the direction of travel. What is the phase difference between the motion of bead B at an instant 1.0 ms1.0\ \text{ms} later and the motion of bead A at the first instant?

    MCQMedium
    1 mark
  5. 5

    Question 5

    A student claims that in a wave on a rope, a small paper flag tied to the rope must move up and down faster than the wave travels along the rope. In her wave the amplitude is 4.0 mm4.0\ \text{mm} and the wavelength is 0.50 m0.50\ \text{m}. What is the ratio of the flag's maximum speed to the wave speed?

    MCQMedium
    1 mark
  6. 6

    Question 6

    A guitarist turns a tuning peg so that the tension in a string rises from 50 N50\ \text{N} to 72 N72\ \text{N}, an increase of 44 %. The string's mass per unit length does not change noticeably. By what percentage does the speed of transverse waves on the string increase?

    MCQMedium
    1 mark
  7. 7

    Question 7

    A craft workshop stretches two copper wires between the same pair of pegs with the same tension. Wire X has a diameter of 0.4 mm0.4\ \text{mm} and wire Y has a diameter of 0.8 mm0.8\ \text{mm}. A pulse is sent along each wire. What is the ratio of the pulse speeds vX:vYv_X : v_Y?

    MCQMedium
    1 mark
  8. 8

    Question 8

    A party trick in which someone speaks after breathing helium works because sound travels much faster in helium than in air. Treat both as ideal gases at the same temperature, with helium monatomic (γ=5/3\gamma = 5/3, M=4 g mol−1M = 4\ \text{g mol}^{-1}) and air diatomic (γ=7/5\gamma = 7/5, M=29 g mol−1M = 29\ \text{g mol}^{-1}). What is the ratio of the speed of sound in helium to that in air?

    MCQMedium
    1 mark
  9. 9

    Question 9

    A steel wire of diameter 1.0 mm1.0\ \text{mm} is stretched with a tension of 157 N157\ \text{N}. A sharp tap along its length sends a longitudinal pulse, speed Y/ρ\sqrt{Y/\rho}, and a sideways pluck sends a transverse pulse, speed T/μ\sqrt{T/\mu}. Taking Young's modulus of steel as 2.0×1011 Pa2.0 \times 10^{11}\ \text{Pa}, what is the ratio of the longitudinal speed to the transverse speed?

    MCQMedium
    1 mark
  10. 10

    Question 10

    A furnace engineer wants to know at what temperature the speed of sound in the furnace air would be exactly twice its value at 0 ∘C0\ ^\circ\text{C}. Treat the air as an ideal gas whose composition does not change.

    MCQMedium
    1 mark
  11. 11

    Question 11

    A trawler's echo sounder sends a short pulse straight down into the sea. Two separate echoes come back from a shoal of fish, the first from the top of the shoal after 0.640 s0.640\ \text{s} and the second from its bottom after 0.660 s0.660\ \text{s}. Using the speed of sound in seawater from Table 14.1, 1522 m s−11522\ \text{m s}^{-1}, how deep is the top of the shoal, and how thick is the shoal?

    MCQMedium
    1 mark
  12. 12

    Question 12

    Two students send pulses of the same shape and size from opposite ends of a long stretched spring, one pulse upward and the other downward. At one instant the pulses overlap exactly and the spring looks completely straight. One student says the energy of the pulses has vanished for that instant. What actually happens to the energy at that instant?

    MCQMedium
    1 mark
  13. 13

    Question 13

    Two vibrators at the same end of a long string each send a wave of amplitude aa, with the same frequency and wavelength, in the same direction. The resultant wave on the string is measured to have amplitude a2a\sqrt{2}. What is the phase difference between the two waves?

    MCQMedium
    1 mark
  14. 14

    Question 14

    A 3.0 m3.0\ \text{m} string is tied to a fixed hook at its left end and, at its right end, to a light ring that slides without friction on a smooth vertical rod. At t=0t = 0 an upward pulse is started near the left end, moving to the right at 15 m s−115\ \text{m s}^{-1}. When does the string first look exactly as it did at t=0t = 0 (pulse at the same place, on the same side, moving the same way), and how many reflections has the pulse undergone by then?

    MCQMedium
    1 mark
  15. 15

    Question 15

    A music teacher tunes a 0.45 m0.45\ \text{m} string, of mass per unit length 2.5×10−3 kg m−12.5 \times 10^{-3}\ \text{kg m}^{-1}, so that its fundamental is in unison with the fundamental of a 0.70 m0.70\ \text{m} organ pipe open at both ends. The speed of sound in the pipe is 340 m s−1340\ \text{m s}^{-1}; ignore edge effects. What tension must the string have?

    MCQMedium
    1 mark
  16. 16

    Question 16

    In a school demonstration a 1.2 m1.2\ \text{m} string fixed at both ends is driven at 240 Hz240\ \text{Hz} and settles into a steady pattern of four equal loops. What is the speed of transverse waves on the string?

    MCQMedium
    1 mark
  17. 17

    Question 17

    A narrow tube closed at its lower end is held over a variable-frequency loudspeaker. As the frequency is raised, the tube resonates at 375 Hz375\ \text{Hz} and next at 625 Hz625\ \text{Hz}. What is the fundamental frequency of the tube, and at what frequency will the next resonance above 625 Hz625\ \text{Hz} occur?

    MCQMedium
    1 mark
  18. 18

    Question 18

    Two small motion sensors are clipped to a long stretched rope that carries a harmonic wave from a vibrator running at 50 Hz50\ \text{Hz}. Sensor 2 is 0.30 m0.30\ \text{m} farther from the vibrator than sensor 1. The two sensors record identical sinusoidal displacement–time graphs, except that sensor 2's graph is shifted later in time by 4.0 ms4.0\ \text{ms}, which is less than one period. What are the speed and the wavelength of the wave on the rope?

    MCQMedium
    1 mark
  19. 19

    Question 19

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Sound travels faster in warm air than in cold air at the same pressure.

    Reason (R): At the same temperature, sound travels faster in hydrogen than in oxygen.

    MCQMedium
    1 mark
  20. 20

    Question 20

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): A pipe closed at one end produces only odd harmonics.

    Reason (R): The speed of sound in air does not depend on pressure at constant temperature.

    MCQMedium
    1 mark
  21. 21

    Question 21

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): In a stationary wave, all particles between two adjacent nodes oscillate in phase.

    Reason (R): In a stationary wave, all particles oscillate with the same amplitude.

    MCQMedium
    1 mark
  22. 22

    Question 22

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The frequency of a sound wave stays the same when it passes from air into water.

    Reason (R): Sound travels faster in water than in air.

    MCQMedium
    1 mark
  23. 23

    Question 23

    A wave of amplitude 2.0 cm2.0\ \text{cm} and wavelength 0.50 m0.50\ \text{m} travels along a long rope at 10 m s−110\ \text{m s}^{-1} in the +x+x direction. A student filming the rope starts her clock at an instant when the point at x=0x = 0 has a displacement of +1.0 cm+1.0\ \text{cm} and is moving downwards. Write the wave as y=asin⁡(kx−ωt+ϕ)y = a\sin(kx - \omega t + \phi).

    (a) Find kk, ν\nu and ω\omega.

    (b) Find the phase constant ϕ\phi. Explain why the condition "moving downwards" is needed to decide it.

    (c) Write the full equation y(x,t)y(x, t) in SI units.

    (d) Find the displacement and the velocity of the point at x=0.125 mx = 0.125\ \text{m} at t=0t = 0, and say which way it is moving.

    Medium
    5 marks
  24. 24

    Question 24

    The G string of a guitar has a vibrating length of 0.65 m0.65\ \text{m} between the nut and the bridge and a mass per unit length of 1.2×10−3 kg m−11.2 \times 10^{-3}\ \text{kg m}^{-1}. When plucked open, it sounds a fundamental of 196 Hz196\ \text{Hz}.

    (a) Find the speed of transverse waves on the string and the tension in it.

    (b) The guitarist presses the string against a fret so that its vibrating length becomes 0.58 m0.58\ \text{m}. Find the new fundamental frequency.

    (c) Instead of using a fret, a beginner tries to reach the same note on the open string by tightening the peg. What tension would make the full 0.65 m0.65\ \text{m} string sound 220 Hz220\ \text{Hz}?

    (d) Explain why players change notes with frets rather than with the pegs.

    Medium
    5 marks
  25. 25

    Question 25

    The four strings of a violin all have a vibrating length of 0.33 m0.33\ \text{m}, and for comfort and an even feel under the bow each is tuned with roughly the same tension, 50 N50\ \text{N}. Their open fundamental frequencies are G 196 Hz196\ \text{Hz}, D 294 Hz294\ \text{Hz}, A 440 Hz440\ \text{Hz} and E 659 Hz659\ \text{Hz}.

    (a) Show that the mass per unit length a string needs is μ=T/(2Lν)2\mu = T/(2L\nu)^2, and find it for each of the four strings.

    (b) If the G and E strings were made of the same material, what would be the ratio of their diameters?

    (c) Explain why instrument makers give the low strings extra mass (thicker, or wound with wire) instead of making them longer.

    Medium
    5 marks
  26. 26

    Question 26

    An engineer needs the speed of sound in a long pipeline filled with nitrogen (M=28 g mol−1M = 28\ \text{g mol}^{-1}, γ=1.4\gamma = 1.4) at a pressure of 1.013×105 Pa1.013 \times 10^5\ \text{Pa}. Take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    (a) Find the density of the nitrogen at 300 K300\ \text{K}.

    (b) Calculate the speed of sound using Newton's formula and using Laplace's formula.

    (c) Explain why Laplace's value, not Newton's, should be trusted.

    (d) On a hot afternoon the gas warms to 330 K330\ \text{K} at the same pressure. Find the new speed of sound, and say whether the change in pressure alone (at fixed temperature) would have had any effect.

    Medium
    5 marks
  27. 27

    Question 27

    At one instant, two waves on the same string have displacements y1=4sin⁡kxy_1 = 4\sin kx and y2=2sin⁡2kxy_2 = 2\sin 2kx, both in millimetres, where k=2π/λk = 2\pi/\lambda.

    (a) Using the principle of superposition, sketch the resultant shape y=y1+y2y = y_1 + y_2 over one wavelength.

    (b) Find the largest displacement of the string at this instant and where it occurs.

    (c) Show that the resultant shape repeats every λ\lambda, and explain why it is nevertheless not a sinusoidal wave.

    Medium
    4 marks
  28. 28

    Question 28

    An earthquake sends out longitudinal P waves at 8.0 km s−18.0\ \text{km s}^{-1} and transverse S waves at 4.5 km s−14.5\ \text{km s}^{-1} through the rock. A seismograph station records the first P wave and, 60 s60\ \text{s} later, the first S wave.

    (a) How far is the station from the source of the earthquake?

    (b) How long after the earthquake did each wave arrive?

    (c) A second station records a gap of 90 s90\ \text{s}. Is it nearer or farther than the first? Explain why the gap tells us the distance.

    Medium
    3 marks
  29. 29

    Question 29

    A student suspects that the speed vv of a wave on a stretched string might depend on the tension TT, the mass per unit length μ\mu and also the length LL of the string. She writes v=C TaμbLcv = C\,T^{a}\mu^{b}L^{c}, with CC a dimensionless constant.

    (a) Use dimensions to find aa, bb and cc. Does the length of the string affect the wave speed?

    (b) A kite string under a tension of 60 N60\ \text{N} has μ=2.0×10−3 kg m−1\mu = 2.0 \times 10^{-3}\ \text{kg m}^{-1}. Taking C=1C = 1, find the wave speed, and find it again when the tension is made four times as large.

    Medium
    3 marks
  30. 30

    Question 30

    A student holds one end of a 6.0 m6.0\ \text{m} string and flicks it once to send an upward pulse along it at 12 m s−112\ \text{m s}^{-1}. The pulse reflects from the far end and comes back to her hand.

    (a) How long after the flick does the pulse return?

    (b) Describe and sketch the returning pulse when the far end is (i) tied firmly to a wall hook and (ii) tied to a light ring that slides freely on a smooth vertical pole. Explain the difference.

    Medium
    3 marks
  31. 31

    Question 31

    A 1.5 m1.5\ \text{m} string fixed at both ends is set vibrating in its third harmonic, with an amplitude of 4.0 mm4.0\ \text{mm} at the antinodes. Two small beads are glued to the string at 0.4 m0.4\ \text{m} and 0.6 m0.6\ \text{m} from the left end.

    (a) Find the positions of all the nodes and antinodes.

    (b) Compare the motion of the two beads: their amplitudes and their phases. Give reasons.

    Medium
    3 marks
  32. 32

    Question 32

    A music teacher has a standard tuning fork A of frequency 256 Hz256\ \text{Hz} and an unmarked fork B. Sounded together, they give 4 beats per second. She then sticks a small blob of wax on one prong of B, and the two forks now give 6 beats per second.

    (a) What are the two possible frequencies of B from the first observation?

    (b) What does the wax do to B's frequency?

    (c) Use the second observation to decide the frequency of B. Explain your reasoning.

    Medium
    3 marks
  33. 33

    Question 33

    A violinist tunes her A string against a 440 Hz440\ \text{Hz} electronic reference. The string is actually at 443.5 Hz443.5\ \text{Hz}.

    (a) How many beats per second does she hear, and how much time passes between two successive loudest sounds?

    (b) What pitch does she hear while the beats continue?

    (c) Should she tighten or loosen the string, and how will she know when it is in tune?

    Medium
    3 marks
  34. 34

    Question 34

    Two astronauts stand 20 m20\ \text{m} apart on the Moon, which has no atmosphere. When one shouts inside her helmet, the other hears nothing, but they talk easily by radio. When they press their helmets together, they can hear each other faintly even with the radio switched off. Explain all three observations, and find how long a radio message takes to cross the 20 m gap and to reach Earth, 3.84×108 m3.84 \times 10^8\ \text{m} away. (c=3.0×108 m s−1c = 3.0 \times 10^8\ \text{m s}^{-1})

    Medium
    2 marks
  35. 35

    Question 35

    Table 14.1 shows that sound travels faster in seawater (1522 m s−11522\ \text{m s}^{-1}) than in fresh water (1482 m s−11482\ \text{m s}^{-1}). A student objects that seawater is denser (1025 kg m−31025\ \text{kg m}^{-3} against 1000 kg m−31000\ \text{kg m}^{-3}), so by v=B/ρv = \sqrt{B/\rho} it should be slower. Use the data to resolve the puzzle.

    Medium
    2 marks
  36. 36

    Question 36

    Noise-cancelling headphones contain a microphone that picks up outside noise and a speaker that plays a matching "anti-noise" signal. Explain, using the principle of superposition, how the noise is cancelled. Then explain why they work very well against the steady low-pitched hum of an aircraft engine (about 100 Hz) but poorly against high-pitched sounds such as a voice at 3000 Hz. Take the speed of sound as 340 m s−1340\ \text{m s}^{-1}.

    Medium
    2 marks
  37. 37

    Question 37

    A pulse sent along a rope tied to a wall comes back upside down. A student argues that when he shouts at a cliff 170 m170\ \text{m} away, the echo should therefore come back "upside down" too and sound different. Explain what happens at the cliff and why the echo sounds the same as the shout. How long does the echo take to return? (Speed of sound 340 m s−1340\ \text{m s}^{-1}.)

    Medium
    2 marks
  38. 38

    Question 38

    A student drives a 0.50 m0.50\ \text{m} string, fixed at both ends, with a vibrator whose frequency she can vary. Waves travel on the string at 200 m s−1200\ \text{m s}^{-1}. She finds large steady vibrations at 200 Hz200\ \text{Hz} and 400 Hz400\ \text{Hz}, but at 300 Hz300\ \text{Hz} the string barely moves. Explain why the string vibrates strongly only at certain frequencies.

    Medium
    2 marks
  39. 39

    Question 39

    A school has a set of 17 tuning forks arranged in order of rising frequency. Each fork gives 4 beats per second with the next one, and the last fork is exactly an octave above the first (twice its frequency). Find the frequencies of the first and last forks, and explain how the beats let you work this out without knowing any fork's frequency in advance.

    Medium
    2 marks
  40. 40

    Question 40

    In a concert hall the low and high notes of an orchestra, say 256 Hz256\ \text{Hz} and 1024 Hz1024\ \text{Hz}, reach a listener in the back row 30 m30\ \text{m} away at the same moment. Suppose instead that the low note travelled at 330 m s−1330\ \text{m s}^{-1} and the high note at 350 m s−1350\ \text{m s}^{-1}. What would go wrong? Explain, using the formula for the speed of sound in air, why this does not happen. (Actual speed 340 m s−1340\ \text{m s}^{-1}.)

    Medium
    2 marks
  41. 41

    Question 41

    A long stretched string carries a sinusoidal transverse wave of amplitude 2.0 mm. The wave has wavelength 0.60 m and travels at 300 m s−1300\ \text{m s}^{-1}. At a certain instant a paint dot on the string is at displacement +1.0 mm+1.0\ \text{mm} and moving upward. What is the speed of the dot at that instant, and how long after it does the dot first reach its highest point?

    MCQHard
    1 mark
  42. 42

    Question 42

    At t=0t = 0 the shape of a long string is y=(0.01 m)sin⁡(2πx/0.4)y = (0.01\ \text{m})\sin(2\pi x/0.4), with xx in metres. The wave travels along the −x-x direction at 2.0 m s−12.0\ \text{m s}^{-1}. What is the displacement of the string element at x=0.05 mx = 0.05\ \text{m} at t=0.05 st = 0.05\ \text{s}?

    MCQHard
    1 mark
  43. 43

    Question 43

    A transverse wave of frequency 180 Hz travels at 36 m s−136\ \text{m s}^{-1} along a taut string. At a certain instant point A on the string is at a crest (displacement +a+a). Point B is 8.75 cm from A along the direction of travel. What is the displacement of B at that instant?

    MCQHard
    1 mark
  44. 44

    Question 44

    A 1.0 m steel wire of linear mass density 4.0×10−3 kg m−14.0\times10^{-3}\ \text{kg m}^{-1} is joined end to end to a 1.0 m aluminium wire of linear mass density 1.4×10−3 kg m−11.4\times10^{-3}\ \text{kg m}^{-1}. The composite wire is stretched between two rigid supports with a tension of 100 N. How long does a transverse pulse take to travel from one support to the other?

    MCQHard
    1 mark
  45. 45

    Question 45

    A steel block (density 7800 kg m−37800\ \text{kg m}^{-3}) hangs from a light vertical wire whose upper end is fixed. The wire is clamped so that its vibrating length is fixed, and its fundamental frequency is 300 Hz. The block is then fully immersed in water (density 1000 kg m−31000\ \text{kg m}^{-3}) without touching the container. (The water pushes up on the block with a force equal to the weight of the water the block displaces.) What is the new fundamental frequency?

    MCQHard
    1 mark
  46. 46

    Question 46

    A sealed tube contains a mixture of 1 mol of helium (γ=5/3\gamma = 5/3, M=4 g mol−1M = 4\ \text{g mol}^{-1}) and 1 mol of oxygen (γ=7/5\gamma = 7/5, M=32 g mol−1M = 32\ \text{g mol}^{-1}) at 300 K. Treating the mixture as an ideal gas, what is the speed of sound in it? (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1})

    MCQHard
    1 mark
  47. 47

    Question 47

    A string 0.80 m long is fixed at one end. Its other end is tied to a light ring that slides without friction on a vertical rod, so that end is free to move sideways while the tension stays the same. Transverse waves travel on the string at 96 m s−196\ \text{m s}^{-1}. What are the two lowest frequencies of its normal modes?

    MCQHard
    1 mark
  48. 48

    Question 48

    Sound of wavelength 90 cm from one source splits into two branches of a tube and recombines at a detector. One branch has a U-shaped section that slides like a trombone, so pulling it out by a distance dd lengthens that route by 2d2d. With the two routes equal, each branch alone would give a displacement amplitude of 5.0 μm5.0\ \mu\text{m} at the detector. How far must the U-section be pulled out, at least, for the detector to record a resultant amplitude of 6.0 μm6.0\ \mu\text{m}?

    MCQHard
    1 mark
  49. 49

    Question 49

    Two waves on a long string are y1=asin⁡(kx−ωt)y_1 = a\sin(kx - \omega t) and y2=asin⁡(kx+ωt+π)y_2 = a\sin(kx + \omega t + \pi), with k=2π rad m−1k = 2\pi\ \text{rad m}^{-1}. They superpose to form a standing wave. At which two smallest positive values of xx are there nodes?

    MCQHard
    1 mark
  50. 50

    Question 50

    A loudspeaker emitting a steady 1.2 kHz tone faces a flat rigid wall, and a standing wave forms in front of the wall. A light tissue-paper strip moved out from the wall along the line to the speaker flutters most strongly at certain positions. The third such position counted from the wall is 37.5 cm from it. What is the speed of sound in the room?

    MCQHard
    1 mark
  51. 51

    Question 51

    A string 1.2 m long, fixed at both ends, resonates at 315 Hz and at 378 Hz, with no resonance in between. In the 378 Hz mode, how many nodes are there (including the two ends), and what is the speed of transverse waves on the string?

    MCQHard
    1 mark
  52. 52

    Question 52

    An aluminium rod 0.90 m long (Y=7.0×1010 PaY = 7.0\times10^{10}\ \text{Pa}, ρ=2700 kg m−3\rho = 2700\ \text{kg m}^{-3}) is clamped at a point 22.5 cm from one end and stroked along its length, so that it vibrates longitudinally. What is the lowest frequency at which it can vibrate?

    MCQHard
    1 mark
  53. 53

    Question 53

    A string 0.80 m long, fixed at both ends, has a fundamental frequency of 120 Hz. It is plucked at a point 20 cm from one end and released. Which set of frequencies is absent from its sound?

    MCQHard
    1 mark
  54. 54

    Question 54

    A string 0.90 m long, fixed at both ends, vibrates in its third harmonic. How many points on the string oscillate with exactly half the amplitude of an antinode, and how far from the nearer end is the point closest to an end?

    MCQHard
    1 mark
  55. 55

    Question 55

    A sonometer wire, at fixed tension, gives 3 beats per second with a tuning fork when its vibrating length is 0.600 m. It again gives 3 beats per second when the vibrating length is 0.630 m. What is the frequency of the fork?

    MCQHard
    1 mark
  56. 56

    Question 56

    Three tuning forks A, B and C are sounded in pairs. Fork A has frequency 480 Hz. A with B gives 4 beats per second, B with C gives 6 beats per second, and A with C gives 2 beats per second. Fork C is known to be higher than A. What are the frequencies of B and C?

    MCQHard
    1 mark
  57. 57

    Question 57

    Two pipes open at both ends, of lengths 50.0 cm and 50.5 cm, sound their fundamental notes together, and 3.40 beats per second are heard. Neglecting edge effects, what is the speed of sound in the air?

    MCQHard
    1 mark
  58. 58

    Question 58

    An organ pipe closed at one end is tuned to match a 440 Hz tuning fork in a hall at 20 °C. The heating then raises the air temperature in the pipe to 30 °C. Ignoring any change in the pipe's length, how many beats per second are now heard when the pipe and the same fork sound together?

    MCQHard
    1 mark
  59. 59

    Question 59

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): A symmetric upward triangular pulse, 3.0 cm high and 6.0 cm long, travels along a string towards an end that is tied firmly to a wall. At the instant the peak of the incident pulse is 1.0 cm from the wall, the string element at that point (1.0 cm from the wall) is displaced 4.0 cm upward.

    Reason (R): At a rigid end the reflected pulse comes back upright, so close to the end the incident and reflected displacements add.

    MCQHard
    1 mark
  60. 60

    Question 60

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The fundamental frequency of a pipe open at both ends is twice that of a pipe of the same length closed at one end.

    Reason (R): In its fundamental mode, the air column in each of the two pipes is half a wavelength long.

    MCQHard
    1 mark
  61. 61

    Question 61

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): When two sounds of slightly different frequencies are heard together, the loudness at a fixed place rises and falls with time.

    Reason (R): Beats are produced only when the two waves travel in opposite directions.

    MCQHard
    1 mark
  62. 62

    Question 62

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): A longitudinal wave cannot be described by a displacement relation of the form s=asin⁡(kx−ωt+ϕ)s = a\sin(kx - \omega t + \phi).

    Reason (R): The displacement relation y=asin⁡(kx−ωt+ϕ)y = a\sin(kx - \omega t + \phi) can describe only sideways (transverse) displacements.

    MCQHard
    1 mark
  63. 63

    Question 63

    A long string carries a sinusoidal transverse wave. The graph shows the shape of a section of the string at t=0t = 0 (solid curve) and at t=0.010 st = 0.010\ \text{s} (dashed curve). During this interval the wave moved through less than half a wavelength.

    Class 11 Physics Waves

    (a) Read the wavelength and the amplitude from the graph, and find the speed and the direction of travel of the wave.

    (b) Find the frequency and the period.

    (c) Write y(x,t)y(x, t) in SI units, consistent with the t=0t = 0 curve.

    (d) Find the velocity (magnitude and direction) of the string element at x=6.0 cmx = 6.0\ \text{cm} at t=0t = 0, and check its direction from the graph without using the equation.

    (e) Show that without the condition "less than half a wavelength" the two curves no longer fix the speed. Find the smallest speed possible for a wave travelling along +x+x.

    Hard
    5 marks
  64. 64

    Question 64

    A wire 1.0 m long, of linear mass density 2.5×10−3 kg m−12.5\times10^{-3}\ \text{kg m}^{-1}, has one end fixed to an electric vibrator of frequency 500 Hz. The other end passes over a pulley and carries a hanger, so the tension can be varied. Both ends of the vibrating length behave as nodes. Take g=9.8 m s−2g = 9.8\ \text{m s}^{-2}.

    (a) Show that the wire vibrates in nn loops when the tension is T=2500/n2T = 2500/n^{2} newtons.

    (b) Find the tensions needed for 1, 2, 3 and 4 loops.

    (c) The wire snaps if the tension exceeds 800 N. What is the fewest number of loops that can be obtained? What total mass must hang from the wire to give 3 loops?

    (d) Sketch the 3-loop pattern, marking the positions of the nodes and antinodes.

    (e) The 500 Hz vibrator is replaced by one of frequency 1000 Hz; the wire, its length and the 800 N limit are unchanged. What is now the fewest number of loops that can be obtained, and what total mass must hang from the wire to give it?

    Hard
    5 marks
  65. 65

    Question 65

    A copper rod 1.2 m long is clamped at its middle and stroked along its length, so that it vibrates longitudinally. For copper Y=1.13×1011 PaY = 1.13\times10^{11}\ \text{Pa} and ρ=8900 kg m−3\rho = 8900\ \text{kg m}^{-3}.

    (a) Find the speed of longitudinal waves in the rod, and compare it with the value for copper in Table 14.1 (3560 m s−13560\ \text{m s}^{-1}).

    (b) A second copper rod has the same length but twice the diameter, so it has four times the mass. It is clamped at its middle and stroked in the same way. A student expects it to sound a lower note because it is heavier. Is she right? Explain, using your result from (a).

    (c) The fundamental frequency of the first rod is measured as 1485 Hz. One end of the vibrating rod is held at the mouth of a tube closed at its lower end, whose air column length can be varied. Taking the speed of sound in air as 340 m s−1340\ \text{m s}^{-1} and neglecting edge effects, find every air-column length up to 30 cm that resonates with the rod's fundamental.

    (d) Compare the wavelength of this note in the rod with its wavelength in the air.

    Hard
    5 marks
  66. 66

    Question 66

    Two identical sonometer wires A and B are both tuned to 400 Hz. The tension in B is then raised by 2.0 %, with its vibrating length unchanged.

    (a) Find the frequency of B and the beat frequency heard when A and B are sounded together.

    (b) Keeping B's new tension, by what percentage must B's vibrating length be changed to remove the beats? Should it be lengthened or shortened?

    (c) If instead only A's vibrating length is changed, by what percentage must it change, and in which sense?

    (d) Starting again from the situation in (a), B's vibrating length is increased by only 0.50 %. Find the new beat frequency.

    Hard
    5 marks
  67. 67

    Question 67

    A pulse on a long string is described by y1=0.084+(x−3t)2y_1 = \dfrac{0.08}{4 + (x - 3t)^{2}}, with xx and yy in metres and tt in seconds.

    (a) Find the speed and the direction of travel of the pulse.

    (b) Find the position and height of the peak at t=2 st = 2\ \text{s}, and sketch the pulse at t=0t = 0 and t=2 st = 2\ \text{s}.

    (c) A second pulse y2=−0.084+(x+3t)2y_2 = -\dfrac{0.08}{4 + (x + 3t)^{2}} travels on the same string. Show that the string is completely flat at t=0t = 0.

    (d) At t=1.0 st = 1.0\ \text{s} the peaks of the two pulses are 6.0 m apart. Find the displacement of the string at x=3.0 mx = 3.0\ \text{m}, where the first pulse alone would have its peak, and explain why it is less than 2 cm. How far apart must the two peaks be before this shortfall drops below 1 % of the peak height?

    Hard
    4 marks
  68. 68

    Question 68

    Table 14.1 gives the speed of sound in hydrogen at 0 °C and 1 atm as 1284 m s−11284\ \text{m s}^{-1}. Take M=2.0 g mol−1M = 2.0\ \text{g mol}^{-1} and R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    (a) Use Laplace's result v=γRT/Mv = \sqrt{\gamma RT/M} to find γ\gamma for hydrogen.

    (b) Compare your value with 5/35/3 and 7/57/5. What does it tell you about the hydrogen molecule?

    (c) Predict the speed of sound in hydrogen at 100 °C. Near 0 °C, by about how much does the speed of sound in hydrogen rise for each 1 °C rise in temperature? Is the average rise per degree between 0 °C and 100 °C larger or smaller than this? Explain.

    Hard
    3 marks
  69. 69

    Question 69

    A tall cylindrical bottle behaves as a pipe closed at the bottom (neglect edge effects; speed of sound 340 m s−1340\ \text{m s}^{-1}). The empty bottle holds an air column 32.0 cm high.

    (a) Find its fundamental frequency.

    (b) Water is poured in until the bottle resonates both with a 1050 Hz tone and with a 1750 Hz tone. Find the depth of water, name the two harmonics, and show that no other depth of water works.

    Hard
    3 marks
  70. 70

    Question 70

    Two triangular pulses, each 2 cm high and 4 cm wide at the base, travel towards each other at 1 cm s−11\ \text{cm s}^{-1} along a long string. The figure shows their positions at t=0t = 0: in case (a) both pulses are on the same side of the string; in case (b) they are on opposite sides.

    Class 11 Physics Waves

    For each case, sketch the string at t=2 st = 2\ \text{s}, 3 s3\ \text{s} and 4 s4\ \text{s}. State the greatest displacement of the element at the midpoint x=6 cmx = 6\ \text{cm} and when it occurs. In case (a), at what times is the displacement of the midpoint exactly 2 cm?

    Hard
    3 marks
  71. 71

    Question 71

    Two tuning forks of 498 Hz and 502 Hz are sounded together. At the listener each fork alone gives a displacement acos⁡(2πνt)a\cos(2\pi\nu t), and the two are in phase at t=0t = 0.

    (a) Show that the resultant is s=2acos⁡(4πt)cos⁡(1000πt)s = 2a\cos(4\pi t)\cos(1000\pi t).

    (b) Find all the instants in the first 0.5 s at which the sound is silent and at which it is loudest.

    (c) Find the amplitude of the resultant at t=1/24 st = 1/24\ \text{s}.

    (d) State the beat frequency and the pitch that is heard.

    Hard
    3 marks
  72. 72

    Question 72

    A pipe 35.0 cm long is closed at one end (speed of sound 343 m s−1343\ \text{m s}^{-1}; neglect edge effects).

    (a) Find its three lowest resonant frequencies.

    (b) For the second and third of these modes, give the positions of the displacement nodes and antinodes measured from the closed end.

    (c) Prove that 490 Hz and 980 Hz cannot be resonances of this pipe. What is the shortest pipe closed at one end that would resonate at 490 Hz?

    Hard
    3 marks
  73. 73

    Question 73

    A sound wave of frequency 500 Hz travels through air at 340 m s−1340\ \text{m s}^{-1}. The displacement of the air layers along the direction of travel is s(x,t)=asin⁡(kx−ωt)s(x, t) = a\sin(kx - \omega t).

    (a) By considering the displacements of neighbouring layers at t=0t = 0, find the positions of the compression and the rarefaction within 0≤x<λ0 \le x < \lambda, and state the displacement ss of the layer at each.

    (b) Show that the compression moves along +x+x at the wave speed, and find its position at t=0.50 mst = 0.50\ \text{ms}.

    Hard
    3 marks
  74. 74

    Question 74

    A uniform rope 4.9 m long hangs vertically from a hook, with its lower end free. A small sideways pulse is started at the bottom. Show that at height yy above the lower end the pulse speed is gy\sqrt{gy}, and find how long the pulse takes to reach the hook (g=9.8 m s−2g = 9.8\ \text{m s}^{-2}).

    Hard
    2 marks
  75. 75

    Question 75

    Ripples on water are restored mainly by surface tension σ\sigma (unit N m−1\text{N m}^{-1}), and long ocean swells by gravity gg. Using dimensional analysis (in the way NCERT finds v=T/μv = \sqrt{T/\mu} for a string), show that the speed of a gravity wave of wavelength λ\lambda is of order gλ\sqrt{g\lambda} and that of a capillary wave is of order σ/(ρλ)\sqrt{\sigma/(\rho\lambda)}, where ρ\rho is the density of water. Then, taking v2∼gλ+σ/(ρλ)v^{2} \sim g\lambda + \sigma/(\rho\lambda), estimate the wavelength at which the two effects are comparable and the slowest possible speed of water waves (σ=0.072 N m−1\sigma = 0.072\ \text{N m}^{-1}, ρ=1000 kg m−3\rho = 1000\ \text{kg m}^{-3}, g=9.8 m s−2g = 9.8\ \text{m s}^{-2}).

    Hard
    2 marks
  76. 76

    Question 76

    A microphone records the strongest frequencies from a plucked string as 165, 330, 495 and 660 Hz. From a uniform circular drumhead (no loading patch) it records 150, 239, 320 and 345 Hz.

    Test each set by dividing by its lowest frequency. Then explain, from the condition that the vibration must fit the boundary, why a string fixed at both ends must give whole-number ratios while a drumhead does not.

    Hard
    2 marks
  77. 77

    Question 77

    The ear can follow changes in loudness only if they are more than about 0.1 s apart. Using the beat formula, find the time between successive loudness maxima for (i) 400 Hz with 403 Hz and (ii) 400 Hz with 450 Hz. Hence explain why beats are heard in case (i) but not in case (ii), and estimate the largest frequency difference for which beats can be heard.

    Hard
    2 marks
  78. 78

    Question 78

    Two loudspeakers are fed the same 680 Hz signal and emit in phase (speed of sound 340 m s−1340\ \text{m s}^{-1}). A listener at P is 3.00 m from one speaker and 3.25 m from the other. At Q she is 3.10 m and 3.60 m from them. At both places the farther speaker's sound arrives with 0.92 times the amplitude of the nearer one's. Find the phase difference at P and at Q, and the resultant amplitude at each in terms of the nearer speaker's amplitude aa. Explain why a room fed by such a pair has loud and quiet spots, and why the quiet spots are not completely silent.

    Hard
    2 marks
  79. 79

    Question 79

    A pulse yi=f(x+vt)y_i = f(x + vt) travels along −x-x on a string towards its end at x=0x = 0, where the string is tied to a light ring that slides without friction on a vertical rod (a free end).

    (a) Explain why the slope ∂y/∂x\partial y/\partial x must be zero at x=0x = 0 at all times. Show that adding the reflected pulse yr=f(−x+vt)y_r = f(-x + vt) satisfies this condition.

    (b) The incident pulse is lopsided. Measured from its leading edge (the edge nearer the ring), it rises steeply to a peak 3.0 cm high over 1.0 cm and then falls gently to zero over the next 3.0 cm. It travels at 5.0 m s−15.0\ \text{m s}^{-1}, and its leading edge reaches the ring at t=0t = 0. Using the reflected pulse from (a), describe the reflected pulse once it has completely left the ring (its height, whether it is upright or inverted, and whether its steep edge is at the front or the back), and find where its peak is at t=0.10 st = 0.10\ \text{s}. How would the reflected pulse differ for a rigid end?

    Hard
    2 marks
  80. 80

    Question 80

    A sitar's main string is tuned to 147 Hz. A sympathetic string beneath it, never plucked, is tuned to 215 Hz. Each string is fixed at both ends. Using the normal modes of both strings, explain why the sympathetic string hardly responds when the main string is plucked. It is then retuned to 220.5 Hz. Show which of its modes is now driven strongly, and why its fundamental is still not driven.

    Hard
    2 marks