Competency-Based Questions (CBQ) · Question 26 of 80
An engineer needs the speed of sound in a long pipeline filled with nitrogen ( M = 28 g mol^ -1 , γ = 1.4 ) at a…
Question 265 marksMedium
An engineer needs the speed of sound in a long pipeline filled with nitrogen (M=28g mol−1, γ=1.4) at a pressure of 1.013×105Pa. Take R=8.31J mol−1K−1.
(a) Find the density of the nitrogen at 300K.
(b) Calculate the speed of sound using Newton's formula and using Laplace's formula.
(c) Explain why Laplace's value, not Newton's, should be trusted.
(d) On a hot afternoon the gas warms to 330K at the same pressure. Find the new speed of sound, and say whether the change in pressure alone (at fixed temperature) would have had any effect.
(a) From PV=nRT, the density is ρ=PM/RT:
ρ=8.31×3001.013×105×0.028=1.14kg m−3
(b) Newton assumed isothermal changes, bulk modulus B=P:
vN=ρP=1.141.013×105=298m s−1
Laplace used adiabatic changes, B=γP:
vL=ργP=1.4×298=353m s−1
(c) In a sound wave each small region of gas is compressed and then expanded hundreds or thousands of times a second, and the compressions and rarefactions are about half a wavelength apart. Heat flows through a gas slowly, so there is no time for the heat produced in a compression to leave it before it turns into a rarefaction. The changes are therefore adiabatic: a compressed region also warms up, which makes it stiffer than in an isothermal squeeze, so the effective bulk modulus is γP, larger than P. Newton's isothermal value is about 15 % too low, which is why it disagrees with measurement; Laplace's value agrees.
(d) Using v=γRT/M, the speed is proportional to T:
v330=353×300330=353×1.049=370m s−1
A change of pressure alone, at fixed temperature, has no effect: P and ρ change in the same proportion, so P/ρ=RT/M and the speed stay the same.