Competency-Based Questions (CBQ) · Question 24 of 80
The G string of a guitar has a vibrating length of 0.65 m between the nut and the bridge and a mass per unit length of…
Question 245 marksMedium
The G string of a guitar has a vibrating length of 0.65m between the nut and the bridge and a mass per unit length of 1.2×10−3kg m−1. When plucked open, it sounds a fundamental of 196Hz.
(a) Find the speed of transverse waves on the string and the tension in it.
(b) The guitarist presses the string against a fret so that its vibrating length becomes 0.58m. Find the new fundamental frequency.
(c) Instead of using a fret, a beginner tries to reach the same note on the open string by tightening the peg. What tension would make the full 0.65m string sound 220Hz?
(d) Explain why players change notes with frets rather than with the pegs.
(a) For the fundamental of a string fixed at both ends, L=λ/2, so λ=2L=1.30m and
v=νλ=196×1.30=254.8m s−1≈255m s−1
From v=T/μ:
T=μv2=1.2×10−3×(254.8)2=77.9N
(b) The tension and μ are unchanged, so the wave speed is still 254.8m s−1. With L=0.58m:
ν1=2Lv=2×0.58254.8=219.7Hz≈220Hz
Shortening the string shortens the fundamental wavelength, so the pitch rises.
(c) Now L=0.65m and we need ν1=220Hz, so the required wave speed is
Check by ratio: T∝ν2 at fixed L and μ, so 77.9×(220/196)2=98.2N.
(d) Raising the note by retuning needs a 26 % increase in tension (77.9 N to 98.2 N), which strains the string and the neck, takes time and must be undone for the next note. A fret changes only the vibrating length, which is quick and repeatable, and the frequency changes in inverse proportion to the length while the tension stays at its safe set value.