Competency-Based Questions (CBQ) · Question 66 of 80
Two identical sonometer wires A and B are both tuned to 400 Hz.
Question 665 marksHard
Two identical sonometer wires A and B are both tuned to 400 Hz. The tension in B is then raised by 2.0 %, with its vibrating length unchanged.
(a) Find the frequency of B and the beat frequency heard when A and B are sounded together.
(b) Keeping B's new tension, by what percentage must B's vibrating length be changed to remove the beats? Should it be lengthened or shortened?
(c) If instead only A's vibrating length is changed, by what percentage must it change, and in which sense?
(d) Starting again from the situation in (a), B's vibrating length is increased by only 0.50 %. Find the new beat frequency.
(a) For a wire, ν=2L1T/μ, so at fixed L and μ, ν∝T:
νB=4001.02=403.98Hz≈404.0Hz
The beat frequency is 404.0−400=4.0 beats per second. (For small changes, Δν/ν≈21ΔT/T=1% of 400 Hz, which is 4 Hz.)
(b) At fixed tension, ν∝1/L. B must come back down to 400 Hz, so
LBLB′=400403.98=1.02=1.00995
B must be lengthened by 0.995 % (about 1.0 %).
(c) A must rise to 403.98 Hz, so its length must fall:
LALA′=403.98400=0.99015
A must be shortened by 0.985 %. The two percentages differ slightly because 1/1.00995=1−0.00995.
(d) Both changes act on B together, with ν∝T/L:
νB′′=400×1.0051.02=401.97Hz
The beat frequency is 401.97−400=2.0 beats per second. The 0.5 % increase in length removes about half of the 1 % rise in frequency caused by the tension.