A steel wire of diameter is stretched with a tension of . A sharp tap along its length sends a longitudinal pulse, speed , and a sideways pluck sends a transverse pulse, speed . Taking Young's modulus of steel as , what is the ratio of the longitudinal speed to the transverse speed?
Competency-Based Questions (CBQ) · Question 9 of 80
A steel wire of diameter 1.0 mm is stretched with a tension of 157 N .
- Correct answer
(A) 31.6
(B) 1000
(C) 63.2
(D) 0.0316
Option (A) is correct.
Explanation: For a wire of density and cross-sectional area , the mass per unit length is , so the transverse speed is
where is the stress in the wire. The area is , so
The density cancels in the ratio:
The stress is only a thousandth of Young's modulus, so a longitudinal pulse along the wire runs about 32 times faster than a transverse one.
Option (B) is wrong: is ; the speeds depend on the square roots of these quantities, so the square root has been left out.
Option (C) is wrong: it takes the area as , using the diameter as if it were the radius; that makes the stress four times too small () and the ratio twice too large.
Option (D) is wrong: it inverts the ratio, giving the transverse speed divided by the longitudinal speed.
