Opening your dashboard
Class 11 Physics Chapter 6 System Of Particles And Rotational Motion: Competency-Based Questions (CBQ)
80 questions on Chapter 6, each worked through on its own page with the AI tutor. Class 11 Physics, CBSE 2026-27.
80 questions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
A designer is balancing a flat triangular display stand on a single central post. Two weights are already fixed to the stand: a 2 kg weight at and a 3 kg weight at . The post is at , so the centre of mass of all the weights must be there. Where must a third weight of 5 kg be fixed? (Treat the weights as particles and ignore the mass of the stand.)
- 21 mark
Question 2
A craftsman bends a uniform steel rod of length 1 m at its midpoint into a right angle to make an L-shaped bracket. The bend O is taken as the origin, with the two arms along the - and -axes, as shown.

Where is the centre of mass of the bracket?
- 31 mark
Question 3
A uniform wooden stick of length 60 cm and mass 100 g has a 200 g metal hook fixed at one end. A student wants to balance the stick horizontally on one finger. How far from the hooked end must the finger be placed? (Treat the hook as a particle at the end.)
- 41 mark
Question 4
On a smooth horizontal floor, a 2 kg cart moves east at while a 3 kg cart moves north at . What is the velocity of the centre of mass of the two carts?
- 51 mark
Question 5
Two blocks of masses 4 kg and 6 kg, joined by a light spring, lie on a smooth horizontal floor. A student pulls the 4 kg block with a constant horizontal force of 50 N, along the line of the spring. At a certain instant, while the spring is stretching and contracting, the 4 kg block has an acceleration of in the direction of the pull. At that instant, what are the acceleration of the 6 kg block and the acceleration of the centre of mass of the two blocks?
- 61 mark
Question 6
Two cables pull on a bracket with forces and . An engineer computes to check how the two forces are oriented. What is , and what does it show?
- 71 mark
Question 7
In a laboratory exercise, a student measures a position vector and a force and finds that the magnitude of their vector product is times their scalar product, . What is the angle between and ?
- 81 mark
Question 8
A large merry-go-round turns about a vertical axis (the -axis) with angular velocity . A child sits on it at the point measured from the axis. What is the child's velocity?
- 91 mark
Question 9
A force acts on a lever of a machine at the point measured from the pivot. What is the torque of this force about the pivot?
- 101 mark
Question 10
A mechanic loosens a nut with a spanner. She pulls at the end of the handle, 25 cm from the centre of the nut, with a force of 80 N directed at to the handle, as shown.

What is the magnitude of the torque she applies to the nut?
- 111 mark
Question 11
A physiotherapist finds the position of a patient's centre of gravity with a "reaction board". A uniform board 2 m long and weighing 100 N rests horizontally on two weighing scales placed under its ends. The patient lies on the board, and the scales read 400 N at the head end and 300 N at the feet end, as shown.

What are the patient's weight and the distance of the centre of gravity from the head end?
- 121 mark
Question 12
A worker uses a light crowbar 1.2 m long to lift one edge of a heavy stone slab. The fulcrum is 0.2 m from the end that is under the slab, and the slab presses down on that end with a force of 1000 N. The worker pushes down on the other end, as shown.

What is the least effort needed, and what is the mechanical advantage of the crowbar?
- 131 mark
Question 13
A twirling baton is a light rod 0.6 m long with a 0.2 kg ball at each end. A performer spins it at 2 revolutions per second about an axis through the middle of the rod, perpendicular to it. Treating the balls as particles, what are the moment of inertia of the baton about this axis and its angular momentum?
- 141 mark
Question 14
The blade of a circular saw is a uniform thin disc of mass 0.8 kg and radius 20 cm. It spins at 1500 rpm about the axis through its centre perpendicular to its plane. What are the radius of gyration of the blade about this axis and the kinetic energy stored in it?
- 151 mark
Question 15
The flywheel of a small engine has a moment of inertia of about its axle and turns at 300 rpm. What are its angular momentum about the axle and its rotational kinetic energy?
- 161 mark
Question 16
A grinding machine's wheel speeds up uniformly from 300 rpm to 900 rpm while making 100 revolutions. What are its angular acceleration and the time taken?
- 171 mark
Question 17
A motor applies a constant torque of 20 N m to a heavy turntable of moment of inertia about its axle, starting from rest. Friction is negligible. What is the angular speed of the turntable after 3 s?
- 181 mark
Question 18
A 0.2 kg puck on a smooth horizontal table is tied to a string that passes down through a small hole in the table. The puck moves in a circle of radius 0.8 m around the hole at . The string is then slowly pulled down until the radius is 0.4 m. What are the new speed of the puck and the factor by which the tension in the string increases?
- 191 mark
Question 19
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): A door opens more easily when pushed near the hinges than when pushed at the handle, far from the hinges.
Reason (R): For a given force, the torque decreases as the perpendicular distance of its line of action from the axis increases.
- 201 mark
Question 20
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): A constant torque on a wheel about a fixed axle produces a uniform angular acceleration.
Reason (R): The power delivered by a torque is .
- 211 mark
Question 21
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): The centre of gravity of an irregular flat body, found by suspending it freely from two different points in turn, depends on which two points are chosen.
Reason (R): When the body hangs at rest, its weight and the tension in the string form a couple.
- 221 mark
Question 22
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): The moment of inertia of a body depends only on its mass.
Reason (R): The angular momentum of a rotating body is zero if no torque acts on it.
- 235 marks
Question 23
Read the passage and answer the questions that follow.
A shopkeeper hangs a signboard from a uniform horizontal rod AB of length 2 m and mass 5 kg. End A of the rod is hinged to the wall, so the rod can turn freely about A. A light cable joins end B to a point on the wall directly above A, and makes an angle of with the rod. The 10 kg signboard hangs from the rod at a point 1.5 m from the wall, as shown. The rod is in equilibrium. Take .

(i) State the two conditions for the equilibrium of the rod, and explain why it is convenient to take torques about the hinge A.
(ii) Find the tension in the cable.
(iii) Find the horizontal and vertical components of the force exerted by the hinge on the rod.
(iv) Find the magnitude and direction of the total hinge force.
(v) The shopkeeper moves the signboard to the far end B of the rod. Find the new tension in the cable.
- 245 marks
Question 24
Read the passage and answer the questions that follow.
A potter's wheel is a uniform disc of mass 20 kg and radius 0.4 m that turns in a horizontal plane about a vertical axle through its centre. It is spinning freely at 60 rpm when the potter drops a 2 kg lump of clay onto it, 0.3 m from the axle, as shown. The clay sticks and turns with the wheel. Treat the clay as a particle. Ignore friction at the axle.

(i) Find the moment of inertia of the wheel and its kinetic energy before the clay is dropped.
(ii) Explain why the angular momentum of the wheel and clay is conserved when the clay lands.
(iii) Find the new angular speed of the wheel, in rad s⁻¹ and in rpm.
(iv) Find the kinetic energy after the clay has stuck. Account for the difference from (i).
(v) The clay takes 0.2 s to come to rest relative to the wheel. Find the average torque that the clay exerts on the wheel during this time.
- 255 marks
Question 25
Read the passage and answer the questions that follow.
At a village well, a rope is wound round a heavy wheel of radius 0.2 m that turns on a fixed horizontal axle. The moment of inertia of the wheel about its axle is . An empty bucket of mass 2 kg hangs from the free end of the rope, as shown. The bucket is released from rest and falls, and the rope unwinds without slipping. Friction at the axle and the mass of the rope are negligible. Take .

(i) Write the equation of motion for the bucket and the equation of rotation for the wheel, and state the relation between the acceleration of the bucket and the angular acceleration of the wheel.
(ii) Find the acceleration of the bucket and the tension in the rope.
(iii) Find the angular acceleration of the wheel.
(iv) Find the speed of the bucket and the angular speed of the wheel after the bucket has fallen 1 m.
(v) Show that the loss in gravitational potential energy of the bucket over this 1 m equals the total kinetic energy gained. Which body gets most of the energy?
- 265 marks
Question 26
Read the passage and answer the questions that follow.
A class investigates how far a stack of identical uniform bricks, each 20 cm long, can be made to overhang the edge of a table. The bricks are placed one on top of another, each brick lying lengthwise along the same line and allowed to project beyond the one below it. The overhang of a single brick is shown in the figure. No glue is used, so the stack stays in place only if it is in equilibrium.

(i) What condition must be satisfied for a single brick resting on the table to stay in place? Find the largest possible overhang of one brick.
(ii) Two bricks are stacked. Find the largest overhang of the top brick beyond the table edge.
(iii) Find the largest overhang of the top brick beyond the table edge when three bricks are stacked.
(iv) Find the largest overhang for four bricks. What is remarkable about the result?
(v) State the general rule the class has used at every step, and explain why, in practice, each overhang must be kept slightly less than the calculated value.
- 274 marks
Question 27
A 1 kg ball is released from rest from the top of a tower 40 m high. At the same instant, a 3 kg ball is thrown vertically upward at from the ground directly below it. Ignore air resistance and take . Take upward as positive and the ground as .
(a) What is the acceleration of the centre of mass of the two balls? Give a reason.
(b) Find the velocity and the height of the centre of mass at the instant of release.
(c) Find the velocity and the height of the centre of mass 1 s later.
(d) Find when and where the balls meet, and show that the centre of mass is then at the meeting point.
- 283 marks
Question 28
The Earth and the Moon both move around their common centre of mass. The mass of the Earth is 81 times the mass of the Moon, and the distance between their centres is . Treat each body as a particle at its centre.
(a) Find the distance of the centre of mass of the Earth–Moon system from the centre of the Earth.
(b) The radius of the Earth is 6400 km. Does this point lie inside or outside the Earth?
(c) Explain what this tells us about the motion of the Earth itself.
- 293 marks
Question 29
A Ferris wheel of radius 10 m turns steadily about its fixed horizontal axle at . Each passenger cabin hangs from a pivot on the rim and stays level (upright) all the time.
(a) What kind of motion does the wheel itself have? Find the speeds of points on the wheel at 2 m, 5 m and 10 m from the axle.
(b) What kind of motion does a cabin have? Find the speed of every point of the cabin.
(c) The cabin moves along a circle, yet it is said not to rotate. Explain.
- 303 marks
Question 30
A punch press uses a flywheel to punch holes in steel sheet. The flywheel is a uniform disc of mass 50 kg and radius 0.4 m, turning at 240 rpm about its axis. Each punch takes 400 J of energy from the flywheel in a fraction of a second, too quickly for the motor to replace it during the punch.
(a) Find the moment of inertia and the kinetic energy of the flywheel before a punch.
(b) Find the angular speed of the flywheel just after a punch, in rad s⁻¹ and in rpm.
(c) Explain why the press uses a heavy flywheel rather than driving the punch directly from the motor.
- 313 marks
Question 31
The graph shows how the angular velocity of the drum of a washing machine changes during one short spin of a rinse cycle.

(a) Find the angular acceleration of the drum while it speeds up and while it slows down.
(b) Find the total angle turned by the drum and the number of revolutions it makes.
(c) Find the average angular velocity of the drum over the whole 19 s.
- 323 marks
Question 32
An electric motor applies a constant torque of 5 N m to a drum of moment of inertia , which starts from rest. Friction is negligible. The drum makes 20 revolutions.
(a) Find the work done by the motor.
(b) Find the angular speed of the drum after the 20 revolutions.
(c) Find the power delivered by the motor at that instant.
- 333 marks
Question 33
A 2 kg puck slides on smooth ice along the straight line with a constant velocity of , as shown.

(a) Find the angular momentum of the puck about the origin O, and show that it does not change as the puck moves.
(b) Find the angular momentum of the puck about the point P .
(c) Explain, using torque, why the angular momentum about each point stays constant.
- 342 marks
Question 34
A carpenter holds an electric drill and looks along it from behind, towards the wall being drilled. The drill bit turns clockwise as seen by the carpenter.
(a) In which direction does the angular velocity vector of the bit point? When the drill is switched off and the bit slows down, in which direction does its angular acceleration point?
(b) The bit turns at 3000 rpm and has a radius of 4 mm. Take the -axis forward along the bit into the wall, the -axis vertically up and the -axis to the carpenter's left. Find the angular speed of the bit and, using , the velocity (magnitude and direction) of the point on the cutting edge directly above the axis.
- 352 marks
Question 35
A person holds a 5 kg ball in the hand with the forearm horizontal, as shown. The forearm can turn about the elbow joint. Its weight, 15 N, acts 0.15 m from the elbow; the ball is 0.35 m from the elbow; the biceps muscle pulls vertically upward on the forearm at a point 0.04 m from the elbow. Take .

(a) Find the force exerted by the biceps and the force exerted on the forearm at the elbow joint.
(b) Find the mechanical advantage of this lever. Why is an arrangement with a mechanical advantage less than 1 still useful?
- 362 marks
Question 36
A coin of mass 10 g and radius 1.2 cm can be treated as a uniform disc. It can be spun flat on a table about the axis through its centre perpendicular to its face, or spun on its edge about a diameter.
(a) Find the moment of inertia of the coin about each of these axes.
(b) The mass and shape of the coin are the same in both cases. Explain why the moments of inertia differ.
- 372 marks
Question 37
A diver leaves the springboard turning slowly with the body stretched out. In the air she pulls her knees to her chest (the "tuck") and spins much faster, and then straightens out again just before entering the water.
(a) Explain why tucking makes her spin faster. If tucking reduces her moment of inertia about the spin axis to one-third, by what factor does her rate of spin change?
(b) Why does she straighten out before entering the water?
- 382 marks
Question 38
A person of mass 60 kg is stranded at rest in the middle of a frozen pond whose surface is perfectly frictionless.
(a) Explain why the person cannot reach the bank by walking.
(b) The person throws a 0.5 kg shoe horizontally at . With what velocity does the person start to move, and what happens to the centre of mass of the person and the shoe?
- 392 marks
Question 39
Two edges of a flat triangular roof panel meeting at one corner are represented by and .
(a) Find and .
(b) Find the unit vectors perpendicular to the panel. Why are there two of them? Which one points upward (towards )?
- 402 marks
Question 40
A driver turns a steering wheel of diameter 40 cm by pushing up with one hand and pulling down with the other, each with a force of 20 N acting tangentially at opposite ends of a diameter, as shown.

(a) Find the torque applied to the steering wheel.
(b) What is the net force on the wheel? Compare this with turning the wheel by pushing tangentially at the rim with one hand only, using a force that gives the same torque.
- 411 mark
Question 41
A straight rod of length and mass is made so that its mass per unit length increases steadily from one end: , where is the distance from the light end A and is a constant.
How far from A is the centre of mass of the rod, and what is the mass per unit length at the heavy end?
- 421 mark
Question 42
A puck sliding at on smooth ice strikes a puck that is at rest. The collision may be elastic, partly inelastic or completely inelastic; nothing is known about it.
What is the greatest amount of kinetic energy that can possibly be lost in the collision?
- 431 mark
Question 43
A grinding wheel of radius starts from rest and turns about its fixed axle with a uniform angular acceleration of .
How long after starting does the acceleration of a point on the rim make an angle of with the radius through that point, and what is the magnitude of this acceleration at that instant?
- 441 mark
Question 44
Three non-zero vectors satisfy , and no two of them are parallel.
Which statement is necessarily true?
- 451 mark
Question 45
The hour hand and the minute hand of a clock are together at exactly 12:00. Both hands turn with uniform angular velocity.
After how long are the two hands together again for the first time?
- 461 mark
Question 46
A stone is thrown horizontally at from a point O on a cliff top. Air resistance is negligible; take .
At after it is thrown, what are the magnitudes of the torque of gravity about O and of the angular momentum of the stone about O?
- 471 mark
Question 47
A door is hinged about a vertical axis. A force of the same magnitude is applied at the handle in four different ways:
I. vertically downwards;
II. horizontally, in the plane of the door, directed towards the hinge line;
III. horizontally, perpendicular to the plane of the door;
IV. horizontally, at to the plane of the door.
Which of these forces have no turning effect about the hinge axis?
- 481 mark
Question 48
A uniform cube of mass rests on a rough horizontal floor. A horizontal push is applied at the middle of one top edge, perpendicular to that edge, and is increased slowly from zero, as shown. Take .

What is the least value of that can tip the cube over its front bottom edge, and the least coefficient of static friction for which it tips rather than slides?
- 491 mark
Question 49
Point masses of , , and are fixed on a light rod at , , and respectively. The system is to be spun about an axis perpendicular to the rod through its centre of mass.
What is the moment of inertia of the system about this axis?
- 501 mark
Question 50
A thin ring and a uniform disc have the same mass and the same radius. Each spins about the axis through its centre perpendicular to its plane, and both have the same angular momentum.
What is the ratio of their rotational kinetic energies, ?
- 511 mark
Question 51
The angular position of a wheel turning about a fixed axis is rad, with in seconds. After the wheel comes momentarily to rest at one instant.
At that instant, what are its angular acceleration and its angular position?
- 521 mark
Question 52
A wheel turns with uniform angular acceleration. It makes 10 revolutions in a certain 2 s interval and 20 revolutions in the next 2 s.
What was its angular speed at the start of the first interval, and how many revolutions does it make in the 2 s after that?
- 531 mark
Question 53
Blocks of and hang from the ends of a light string passing over a pulley that is a uniform disc of mass , free to turn about a smooth horizontal axle, as shown. The string does not slip on the pulley. The system is released from rest. Take .

What are the acceleration of the blocks and the tensions (on the 3 kg side) and (on the 2 kg side)?
- 541 mark
Question 54
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): A particle moving in a straight line can have angular momentum about a point.
Reason (R): A particle has angular momentum about a point only when it moves along a curved path around that point.
- 551 mark
Question 55
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): The centre of gravity of a very tall building lies slightly above its centre of mass.
Reason (R): The acceleration due to gravity is slightly larger at the top floors of a tall building than at its lower floors.
- 561 mark
Question 56
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): If the total external force on a body is zero, the total torque on it is the same about every point.
Reason (R): If the total external force on a body is zero, the body must be in rotational equilibrium.
- 571 mark
Question 57
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): A body cut into two pieces by a plane through its centre of mass always gives two pieces of equal mass.
Reason (R): The centre of mass divides a body so that the masses on its two sides are equal.
- 581 mark
Question 58
A horizontal rod assembly with moment of inertia about a vertical axis through its centre spins freely at . Two small beads, each of mass , are held on the rod at on either side of the axis. They are released and slide without friction to stops at the ends, from the axis.
What is the angular speed of the assembly once the beads have reached the stops?
- 591 mark
Question 59
An electric motor delivers a power of while running at . The same motor, working at a constant , is used to bring a flywheel of moment of inertia from rest up to . Neglect friction.
What is the torque of the motor at 1500 rpm, and how long does it take to bring the flywheel up to speed?
- 601 mark
Question 60
Two forces act on a light rod lying along the -axis: upwards at and downwards at , as shown.

What single force, applied to the rod, will keep it in equilibrium?
- 611 mark
Question 61
A particle moves on a horizontal circle of radius . Its speed increases at a constant rate of . At a certain instant its speed is .
What is the torque about the centre of the circle of the net force on the particle?
- 621 mark
Question 62
In a water molecule each O–H bond is long and the angle between the bonds is , as shown. Take the masses of the oxygen and hydrogen atoms as and , and treat the atoms as point masses.

How far from the oxygen atom is the centre of mass of the molecule?
- 635 marks
Question 63
Climbing a ladder. A uniform ladder 5 m long and of mass 15 kg rests against a smooth vertical wall with its foot on a rough horizontal floor, 3 m from the wall; its top is 4 m above the floor. The coefficient of static friction between the ladder and the floor is . A man of mass 60 kg starts to climb the ladder slowly. Let be his distance from the foot, measured along the ladder. Take .

(i) Name the forces on the ladder (with the man on it) and show that the normal reaction of the floor is 750 N wherever the man stands.
(ii) Find the force of friction on the ladder when the man stands at its midpoint. Does the ladder slip?
(iii) How far along the ladder can the man climb before the ladder starts to slip?
(iv) At the moment it is about to slip, find the reaction of the wall and the magnitude and direction of the total force exerted by the floor.
(v) Find the least coefficient of friction that would let the man climb all the way to the top.
- 645 marks
Question 64
Laboratory centrifuge. The rotor of a centrifuge is a uniform disc of mass 2 kg and radius 0.15 m, turning about its central axis. Starting from rest, the motor brings it up to 6000 rpm in 25 s with uniform angular acceleration. The sample tubes are small and light; ignore their mass except in (v), and ignore friction. Take .
(i) Find the angular acceleration of the rotor and the torque supplied by the motor.
(ii) How many revolutions does the rotor make while speeding up? Find the work done by the motor and check it against the rotor's final kinetic energy.
(iii) A sample sits 0.1 m from the axis. At full speed, find its speed and its centripetal acceleration, as a multiple of .
(iv) Find the angular momentum of the rotor at full speed.
(v) The tubes are loaded carelessly, so that the centre of mass of the rotor and its load (total mass 2.4 kg) is 1 mm from the axis. What horizontal force must the axle exert on the rotor at full speed? Why are tubes always loaded in balanced, opposite pairs?
- 655 marks
Question 65
Tug on the ice. Two skaters of masses 60 kg and 40 kg stand at rest on smooth ice, 10 m apart, holding the ends of a light rope. They both pull on the rope, which carries a constant tension of 50 N, until they meet. Friction on the ice is negligible.

(i) Find the acceleration of each skater.
(ii) How long after they start pulling do they meet?
(iii) Where do they meet? Show that this point is the centre of mass of the two skaters, and explain why it did not move.
(iv) Find the velocity and momentum of each skater just before they meet. What is the total momentum?
(v) On meeting they hold on to each other. What is their common velocity then? Find the kinetic energy lost in the grab and show that it equals the work done by the two of them in pulling on the rope.
- 665 marks
Question 66
Braking a flywheel. A flywheel of moment of inertia turns at about a fixed axle. The drive is disconnected and a brake shoe is pressed radially against its rim, at from the axis, with a force of , as shown. The coefficient of kinetic friction between the shoe and the rim is . Neglect friction at the axle.

(i) Find the frictional force on the rim and the braking torque about the axis.
(ii) Find the angular deceleration and the time the flywheel takes to stop.
(iii) How many revolutions does it make while stopping?
(iv) How much heat is produced at the brake?
(v) Find the rate at which heat is produced at the moment the brake is applied, and the average rate over the whole stop. Why are they different?
- 674 marks
Question 67
A force acts at the point P m.
(a) Find the torque of about the point Q m, and its magnitude.
(b) Find the perpendicular distance of the line of action of from Q.
(c) Verify that this torque is perpendicular to both and the position vector of P relative to Q.
(d) Find the torque of the same force about the origin O, and show that the difference between the two torques equals , where is the position vector of Q.
- 683 marks
Question 68
A uniform wire is bent into a right-angled triangle with sides 3 m, 4 m and 5 m. The right angle is at the origin O, the 3 m side lies along the -axis and the 4 m side along the -axis, as shown.

(a) Find the coordinates of the centre of mass of the wire frame.
(b) A flat uniform plate (lamina) of the same triangular shape has its centre of mass at the centroid, m. Explain why the wire frame's centre of mass is different.
- 693 marks
Question 69
A uniform door weighing 300 N and 1 m wide hangs on two hinges on one vertical edge, 2 m apart, as shown. Assume that each hinge supports half the weight of the door.

(a) Find the horizontal force exerted by each hinge on the door, and state its direction.
(b) Find the magnitude of the total force exerted by each hinge.
(c) Why does the upper hinge of a heavy door usually work loose first?
- 703 marks
Question 70
A wheel starts from rest at and its angular acceleration increases steadily with time: , with in seconds.
(a) Find its angular velocity and the angle turned as functions of time.
(b) Find its angular velocity at and the number of revolutions made in the first 4 s.
(c) A student uses and gets 96 rad for the first 4 s. Explain the mistake.
- 713 marks
Question 71
A light rod 1 m long is pivoted at its centre on a smooth horizontal axle. Small masses of 2 kg and 1 kg are fixed at its ends. The rod is held horizontal and released from rest, as shown. Take .

(a) Find the torque about the pivot and the angular acceleration of the rod just after release.
(b) Find the angular speed of the rod when it becomes vertical, and the speed of each mass then.
(c) Just after release, what is the downward acceleration of the 2 kg mass? Why is it less than ?
- 723 marks
Question 72
A horizontal turntable of moment of inertia and radius 2 m can turn freely about a vertical axis through its centre. A person of mass 50 kg stands on its rim; everything is at rest. The person starts walking along the rim so that her speed relative to the ground is , as shown in the top view. Treat the person as a point mass.

(a) Find the angular velocity of the turntable, and its sense.
(b) The person then stops walking and stands still on the rim. What happens to the turntable? Explain.
(c) While she was walking, how much kinetic energy had been produced, and where did it come from?
- 733 marks
Question 73
A flywheel is made of a thin heavy rim (a ring of mass 8 kg and radius 0.5 m) joined to a central hub (a uniform disc of mass 2 kg and radius 0.1 m). The spokes are light.
(a) Find its moment of inertia about its axis and its radius of gyration.
(b) Find the kinetic energy it stores at 600 rpm, and compare it with the energy stored at the same speed by a uniform disc of the same total mass and radius 0.5 m.
(c) Explain why flywheels are made with most of their mass in a heavy rim.
- 743 marks
Question 74
The Earth turns about its axis with angular velocity . Take the radius of the Earth as and treat it as a rigid sphere.
(a) Find the speed, due to this rotation, of a point on the equator and of a point at latitude . What is the speed at the North Pole?
(b) At what latitude is the speed due to the Earth's rotation ?
(c) Why are satellites usually launched eastwards, and from sites near the equator?
- 752 marks
Question 75
In the "flop" style of high jump, the athlete goes over the bar head first and backwards, arching the body around the bar.
(a) Explain how this allows the athlete's centre of mass to pass below the bar even though every part of the body goes over it.
(b) Why is this an advantage? Estimate the energy saved by a 60 kg jumper whose centre of mass passes 0.1 m lower than it would with a straight body. Take .
- 762 marks
Question 76
A shell of mass is at the top of its path, 45 m above level ground and 60 m horizontally from the gun, moving horizontally at . It bursts into two equal halves. Just after the burst one half moves straight down at . Take and neglect air resistance.
(a) Find the velocity of the other half, and where and when each half lands (time measured from the burst).
(b) Without the burst the shell would have landed 120 m from the gun. Where is the centre of mass of the two halves once both have landed? Explain why it is not at 120 m.
- 772 marks
Question 77
The diagonals of a parallelogram are and .
(a) Show that the area of a parallelogram is , and find this area.
(b) Find the sides of the parallelogram and verify the area directly.
- 782 marks
Question 78
(a) A helicopter's engine drives its main rotor about a vertical axis. Explain why, without a tail rotor, the body of the helicopter would start to spin in the opposite direction as soon as the main rotor speeds up.
(b) How does the small tail rotor prevent this?
- 792 marks
Question 79
A tightrope walker carries a long, heavy pole held horizontally across the body.
(a) Explain, using , how the pole helps the walker keep balance.
(b) Why is a long pole better than a short pole of the same mass?
- 802 marks
Question 80
(a) Show that does not imply , using , and . What can be concluded in general?
(b) Interpret this for torque: two different forces act at the same point P, whose position vector is . When do they have the same torque about the origin?
