Competency-Based Questions (CBQ) · Question 23 of 80
Read the passage and answer the questions that follow.
Question 235 marksMedium
Read the passage and answer the questions that follow.
A shopkeeper hangs a signboard from a uniform horizontal rod AB of length 2 m and mass 5 kg. End A of the rod is hinged to the wall, so the rod can turn freely about A. A light cable joins end B to a point on the wall directly above A, and makes an angle of 30∘ with the rod. The 10 kg signboard hangs from the rod at a point 1.5 m from the wall, as shown. The rod is in equilibrium. Take g=10m s−2.
(i) State the two conditions for the equilibrium of the rod, and explain why it is convenient to take torques about the hinge A.
(ii) Find the tension in the cable.
(iii) Find the horizontal and vertical components of the force exerted by the hinge on the rod.
(iv) Find the magnitude and direction of the total hinge force.
(v) The shopkeeper moves the signboard to the far end B of the rod. Find the new tension in the cable.
The forces on the rod are: its weight 5×10=50N at its midpoint (1 m from A); the pull of the signboard 10×10=100N at 1.5 m from A; the tension T at B along the cable, towards the wall and upward at 30∘ to the rod; and the hinge force at A with components H (horizontal) and V (vertical).
(i) For equilibrium of a rigid body:
the vector sum of the external forces is zero (translational equilibrium), and
the total torque of the external forces about any point is zero (rotational equilibrium).
The hinge force is unknown in both size and direction. Taking torques about A removes it from the torque equation, because its line of action passes through A. The torque equation then contains only one unknown, T.
(ii) Only the vertical component of T, Tsin30∘, has a moment about A (the horizontal component Tcos30∘ acts along the rod, through A). Its lever arm is AB = 2 m. Anticlockwise torque = clockwise torque:
Tsin30∘×2=50×1+100×1.5T×0.5×2=50+150=200⇒T=200N
Tension in the cable =200N.
(iii) Horizontal forces: the cable pulls B towards the wall with Tcos30∘, so the hinge must push the rod away from the wall:
The hinge force is 180N, directed away from the wall at 16.1∘ above the horizontal. The free-body diagram of the rod, with the arrows drawn to scale, is shown below.
(v) With the signboard at B, its lever arm about A becomes 2 m:
T′sin30∘×2=50×1+100×2=250⇒T′=250N
New tension =250N, larger than before, because the signboard's weight now has a larger moment about the hinge. The cable (and its fixing) must be strong enough for this.