(i) For a uniform disc about its axis (Table 6.1):
I=21MR2=21×20×0.42=1.6 kg m2
ω=60 rpm=6060×2π=2π rad s−1=6.28 rad s−1
K=21Iω2=21×1.6×(2π)2=31.6 J
I=1.6 kg m2, K=31.6 J.
(ii) Treat the wheel and the clay as one system. The forces between them while the clay sticks are internal and their torques cancel. The external forces (weights and the reaction of the axle) are vertical or act at the axle, so they have no torque about the vertical axis, and friction at the axle is neglected. With zero external torque about the axis, dtdL=0, so L=Iω stays constant.
(iii) The clay adds mr2=2×0.32=0.18 kg m2, so the new moment of inertia is
I′=1.6+0.18=1.78 kg m2
Iω=I′ω′⇒ω′=1.781.6×2π=5.65 rad s−1
ω′=2π5.65×60=53.9 rpm
New angular speed =5.65 rad s−1=53.9 rpm.
(iv)
K′=21I′ω′2=21×1.78×5.652=28.4 J
K′=28.4 J, so about 3.2 J of kinetic energy is lost. Angular momentum is conserved, but kinetic energy is not: the clay lands with no rotational speed and must be dragged up to the wheel's speed by friction between clay and wheel. That friction does negative work, and about 3.2 J becomes heat (and some sound and deformation of the clay). This is like a perfectly inelastic collision in linear motion.
(v) The torque on the wheel equals the rate of change of the wheel's own angular momentum, τ=dtdL. During the 0.2 s the wheel alone (moment of inertia 1.6 kg m²) slows from 2π=6.283 rad s−1 to 5.648 rad s−1:
ΔLwheel=I(ω−ω′)=1.6×(6.283−5.648)=1.016 kg m2s−1
τav=ΔtΔLwheel=0.21.016=5.1 N m
The clay exerts an average torque of about 5.1 N m on the wheel, opposing its rotation. Check: the clay gains exactly the angular momentum the wheel loses, 0.18×5.648=1.016 kg m2s−1, because the torques of the wheel on the clay and of the clay on the wheel are equal and opposite (internal).