Competency-Based Questions (CBQ) · Question 64 of 80
Laboratory centrifuge.
Question 645 marksHard
Laboratory centrifuge. The rotor of a centrifuge is a uniform disc of mass 2 kg and radius 0.15 m, turning about its central axis. Starting from rest, the motor brings it up to 6000 rpm in 25 s with uniform angular acceleration. The sample tubes are small and light; ignore their mass except in (v), and ignore friction. Take g=10m s−2.
(i) Find the angular acceleration of the rotor and the torque supplied by the motor.
(ii) How many revolutions does the rotor make while speeding up? Find the work done by the motor and check it against the rotor's final kinetic energy.
(iii) A sample sits 0.1 m from the axis. At full speed, find its speed and its centripetal acceleration, as a multiple of g.
(iv) Find the angular momentum of the rotor at full speed.
(v) The tubes are loaded carelessly, so that the centre of mass of the rotor and its load (total mass 2.4 kg) is 1 mm from the axis. What horizontal force must the axle exert on the rotor at full speed? Why are tubes always loaded in balanced, opposite pairs?
(i) From Table 6.1 for a disc,
I=21MR2=21(2)(0.15)2=0.0225kg m2
The final angular speed is ω=6000×602π=200π=628.3rad s−1, so
α=tω=25628.3=25.1rad s−2,τ=Iα=0.0225×25.13=0.565N m
The rotor makes 1250 revolutions, and the motor does 4.44kJ of work, all of which appears as rotational kinetic energy, as the work–energy relation for rotation requires.
The sample moves at 62.8m s−1 with a centripetal acceleration of 3.95×104m s−2, about 3950g. This huge acceleration is what makes denser particles settle out quickly.
(iv)
L=Iω=0.0225×628.3=14.1kg m2s−1
So L=14.1kg m2s−1, along the axis.
(v) The centre of mass of the rotor and load now moves on a circle of radius d=1mm. By Fext=MAcm, some external force must supply its centripetal acceleration ω2d, and the only horizontal external force is the push of the axle:
F=Mω2d=2.4×(628.3)2×0.001=947N
The axle must exert about 947N, some 40 times the weight of the loaded rotor, and this force turns round with the rotor 100 times a second, shaking the machine and wearing the bearings. If the tubes are loaded in equal, opposite pairs, the centre of mass stays on the axis, Acm=0, and the axle needs to exert no such force.