(a) Let λ be the mass per unit length. By symmetry, each straight side has its centre of mass at its midpoint, so each side can be replaced by a point mass there:
| Side | Mass | Midpoint (m) |
|---|
| along x, 3 m | 3λ | (1.5,0) |
| along y, 4 m | 4λ | (0,2) |
| hypotenuse, 5 m | 5λ | (1.5,2) |
The total mass is 12λ.
X=12λ3λ(1.5)+4λ(0)+5λ(1.5)=124.5+7.5=1.0 m
Y=12λ3λ(0)+4λ(2)+5λ(2)=128+10=1.5 m
The centre of mass of the frame is at (1.0,1.5) m.

(b) In a wire frame all the mass lies on the boundary, and the longest side carries the most mass. The hypotenuse (5 m, the heaviest side) runs from (3,0) to (0,4) with its midpoint at height 2 m, and the 4 m side also has its midpoint at height 2 m, so the frame's mass is concentrated higher up than in a plate. In a lamina the mass is spread over the whole area, and much of it lies near the wide base, which pulls its centre of mass down to y=4/3=1.33 m. The centre of mass depends on how the mass is distributed, not just on the outline; here the two x-coordinates happen to agree (1.0 m) but the heights do not.