Competency-Based Questions (CBQ) · Question 69 of 80
A uniform door weighing 300 N and 1 m wide hangs on two hinges on one vertical edge, 2 m apart, as shown.
Question 693 marksHard
A uniform door weighing 300 N and 1 m wide hangs on two hinges on one vertical edge, 2 m apart, as shown. Assume that each hinge supports half the weight of the door.
(a) Find the horizontal force exerted by each hinge on the door, and state its direction.
(b) Find the magnitude of the total force exerted by each hinge.
(c) Why does the upper hinge of a heavy door usually work loose first?
(a) The weight acts at the centre of the door, 0.5m from the hinge line, and tends to turn the door about the lower hinge so that its top swings away from the wall. The only forces that can prevent this are the horizontal hinge forces H. There is no other horizontal force, so the two must be equal and opposite (a couple).
Take moments about the lower hinge (its forces have zero moment there). The upper hinge's horizontal force acts 2 m above it:
H×2=300×0.5⇒H=75N
Each hinge exerts a horizontal force of 75N: the upper hinge pulls the door towards the wall and the lower hinge pushes it away from the wall.
(b) Each hinge also supports 150N vertically, so the total force of each hinge is
F=752+1502=168N
Each hinge exerts 168N, the upper one inclined towards the wall and the lower one away from it.
(c) The upper hinge must pull the door towards the wall, so its screws are pulled out of the door frame, while the lower hinge is pressed into the frame. A pulling load loosens screws much more easily than a pressing one, so the upper hinge fails first. (Moving the hinges further apart reduces H, since H=150/d.)