(i) The normal force between shoe and rim is 200 N, so the kinetic friction on the rim, tangential and opposing the motion, is
f=μN=0.4×200=80 N
The 200 N push is radial; its line passes through the axis and it has no torque. Only friction, with lever arm 0.5 m, gives a torque:
τ=fR=80×0.5=40 N m
So f=80 N and the braking torque is 40 N m.
(ii) ω0=600×602π=20π=62.8 rad s−1. From τ=Iα,
α=Iτ=1040=4 rad s−2 (deceleration)
0=ω0−αt⇒t=462.83=15.7 s
So α=4 rad s−2 and it stops in 15.7 s.
(iii)
θ=2αω02=2×4(62.83)2=493.5 rad=2π493.5=78.5 rev
It makes 78.5 revolutions while stopping.
(iv) All the rotational kinetic energy is turned into heat by friction:
Q=21Iω02=21(10)(62.83)2=1.97×104 J
Check: work done against the braking torque =τθ=40×493.5=1.97×104 J. Heat produced =19.7 kJ.
(v) The power of a torque is P=τω. At the start,
P0=40×62.83=2.51×103 W
The average over the stop is
Pavg=tQ=15.711.974×104=1.26×103 W
Heat is produced at 2.51 kW at first and 1.26 kW on average. The braking torque is constant, but ω falls uniformly to zero, so P=τω falls uniformly too, and its average is half its initial value. The rim heats fastest in the first moments of braking.