Confirming your payment

Skip to content

Opening your dashboard

Class 11 Physics Chapter 12 Kinetic Theory: Competency-Based Questions (CBQ)

80 questions on Chapter 12, each worked through on its own page with the AI tutor. Class 11 Physics, CBSE 2026-27.

80 questions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    A mass spectrometer in a gas-analysis lab reports that one molecule of an unknown pure gas has a mass of 5.31×10−26 kg5.31 \times 10^{-26}\ \text{kg}. The gas is known to be one of those listed below. (NA=6.02×1023 mol−1N_A = 6.02 \times 10^{23}\ \text{mol}^{-1}; molar masses: CH4_4 16, N2_2 28, O2_2 32, SO2_2 64, all in g mol−1\text{g mol}^{-1}.) Which gas is it?

    MCQMedium
    1 mark
  2. 2

    Question 2

    In a laboratory, two identical 1.0 L1.0\ \text{L} flasks are filled, one with hydrogen (M0=2 g mol−1M_0 = 2\ \text{g mol}^{-1}) and the other with carbon dioxide (M0=44 g mol−1M_0 = 44\ \text{g mol}^{-1}). Both flasks are at room temperature and at the same pressure. Which statement about the contents of the two flasks is correct?

    MCQMedium
    1 mark
  3. 3

    Question 3

    Before a long drive, the air in a car tyre is at an absolute pressure of 3.0 atm3.0\ \text{atm} and a temperature of 27 ∘C27\ ^\circ\text{C}. After the drive the air in the tyre is at 47 ∘C47\ ^\circ\text{C}. Treat the volume of the tyre as constant and the air as an ideal gas. What is the new absolute pressure of the air in the tyre?

    MCQMedium
    1 mark
  4. 4

    Question 4

    An engineer designing a hot-air balloon needs the density of the outside air at STP (273 K273\ \text{K} and 1.013×105 Pa1.013 \times 10^5\ \text{Pa}). Treat air as an ideal gas of molar mass M0=29 g mol−1M_0 = 29\ \text{g mol}^{-1} and take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}. What value should she use?

    MCQMedium
    1 mark
  5. 5

    Question 5

    On a humid day, a 50 m350\ \text{m}^3 room is at 300 K300\ \text{K} and a total air pressure of 1.013×105 Pa1.013 \times 10^5\ \text{Pa}. A hygrometer shows that the partial pressure of water vapour in the room is 2.4 kPa2.4\ \text{kPa}. A dehumidifier is to remove all this vapour. What mass of water vapour is in the room? (Molar mass of water 18 g mol−118\ \text{g mol}^{-1}, R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1})

    MCQMedium
    1 mark
  6. 6

    Question 6

    An oxygen cylinder in a hospital store room is at 27 ∘C27\ ^\circ\text{C}. A student wants the root mean square speed of the oxygen molecules in it. (Molar mass of O2_2 =32 g mol−1= 32\ \text{g mol}^{-1}, R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.) What value should she get?

    MCQMedium
    1 mark
  7. 7

    Question 7

    In a low-temperature experiment, helium (M0=4 g mol−1M_0 = 4\ \text{g mol}^{-1}) is held at −173 ∘C-173\ ^\circ\text{C}. A cylinder in the next room holds methane (M0=16 g mol−1M_0 = 16\ \text{g mol}^{-1}) at 27 ∘C27\ ^\circ\text{C}. What is the ratio of the rms speed of the helium atoms to that of the methane molecules?

    MCQMedium
    1 mark
  8. 8

    Question 8

    In a cryogenic plant, oxygen gas leaves a cold store at −73 ∘C-73\ ^\circ\text{C}. Before it enters a burner, it must be warmed until the rms speed of its molecules is 1.51.5 times its value in the store. To what temperature must the oxygen be warmed?

    MCQMedium
    1 mark
  9. 9

    Question 9

    A sensor inside a sealed process chamber reports a gas pressure of 2.0×105 Pa2.0 \times 10^5\ \text{Pa} and a number density of 4.0×10254.0 \times 10^{25} molecules per cubic metre. Treating the gas as ideal (kB=1.38×10−23 J K−1k_B = 1.38 \times 10^{-23}\ \text{J K}^{-1}), what are the temperature of the gas and the average translational kinetic energy of a molecule?

    MCQMedium
    1 mark
  10. 10

    Question 10

    A student is told that the air in a 1.0 L1.0\ \text{L} bottle at atmospheric pressure (1.013×105 Pa1.013 \times 10^5\ \text{Pa}) carries a surprising amount of energy in the random translational motion of its molecules. Treating air as an ideal gas, what is the total translational kinetic energy of the molecules in the bottle?

    MCQMedium
    1 mark
  11. 11

    Question 11

    In a diesel-engine test, a fixed amount of air is compressed from 2.0 L2.0\ \text{L} at 1.0 atm1.0\ \text{atm} to 0.50 L0.50\ \text{L} at 6.0 atm6.0\ \text{atm}. By what factor does the rms speed of the air molecules change?

    MCQMedium
    1 mark
  12. 12

    Question 12

    A data logger measures that 1.0 mol1.0\ \text{mol} of an unknown ideal gas at 400 K400\ \text{K} has an internal energy of 8.31×103 J8.31 \times 10^3\ \text{J} (taking the energy at 0 K0\ \text{K} as zero). Using the law of equipartition of energy (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}), how many degrees of freedom does each molecule of the gas have?

    MCQMedium
    1 mark
  13. 13

    Question 13

    Two identical cylinders stand side by side in a store room: one holds 1 mol1\ \text{mol} of helium and the other 1 mol1\ \text{mol} of oxygen, both at the same temperature. What is the ratio of the total translational kinetic energy of the helium molecules to that of the oxygen molecules?

    MCQMedium
    1 mark
  14. 14

    Question 14

    In an experiment, 3.0 mol3.0\ \text{mol} of nitrogen in a cylinder with a freely moving piston is heated slowly, so that its pressure stays constant, and its temperature rises by 20 K20\ \text{K}. Treat nitrogen as an ideal gas of rigid diatomic molecules. How much heat is supplied? (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1})

    MCQMedium
    1 mark
  15. 15

    Question 15

    A gas mixture for an experiment is made by mixing 1 mol1\ \text{mol} of helium with 1 mol1\ \text{mol} of oxygen (treated as rigid diatomic molecules). What are the molar specific heat at constant volume of the mixture (per mole of mixture) and its ratio of specific heats γ\gamma?

    MCQMedium
    1 mark
  16. 16

    Question 16

    A welding shop stores argon (molar mass 39.9 g mol−139.9\ \text{g mol}^{-1}) in sealed rigid cylinders. For a heat-load calculation the engineer needs the specific heat capacity of argon per kilogram at constant volume. Treat argon as a monatomic ideal gas (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}). What is it?

    MCQMedium
    1 mark
  17. 17

    Question 17

    A vacuum pump lowers the pressure of the air in a glass chamber from 1 atm1\ \text{atm} to 1.0×10−3 atm1.0 \times 10^{-3}\ \text{atm}, while the temperature stays the same. How does the mean free path of the air molecules in the chamber change?

    MCQMedium
    1 mark
  18. 18

    Question 18

    In a gas at room conditions, a molecule moves with a typical speed of 500 m s−1500\ \text{m s}^{-1}, and its mean free path is 1.0×10−7 m1.0 \times 10^{-7}\ \text{m}. About how many collisions does this molecule make with other molecules every second?

    MCQMedium
    1 mark
  19. 19

    Question 19

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): At room temperature, about the same amount of heat is needed to raise the temperature of 1 mol1\ \text{mol} of aluminium and of 1 mol1\ \text{mol} of lead by 1 K1\ \text{K}.

    Reason (R): A lead atom is more than seven times as massive as an aluminium atom.

    MCQMedium
    1 mark
  20. 20

    Question 20

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): A rigid vessel holds 1 mol1\ \text{mol} of oxygen. If 1 mol1\ \text{mol} of nitrogen is pumped in and the vessel is brought back to its original temperature, the pressure in the vessel is the same as before.

    Reason (R): The total pressure of a mixture of gases is the average of the pressures that the separate gases would exert if each alone filled the vessel.

    MCQMedium
    1 mark
  21. 21

    Question 21

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): When an ideal gas is allowed to expand slowly while its temperature is held constant, its internal energy stays the same.

    Reason (R): The molecules of an ideal gas attract one another, so moving them farther apart changes their potential energy.

    MCQMedium
    1 mark
  22. 22

    Question 22

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The rms speed of a gas doubles when its absolute temperature doubles.

    Reason (R): The average kinetic energy of a molecule is proportional to T2T^2.

    MCQMedium
    1 mark
  23. 23

    Question 23

    A diver's scuba tank has an internal volume of 12 L12\ \text{L}. After filling, it holds compressed air at an absolute pressure of 2.0×107 Pa2.0 \times 10^7\ \text{Pa} and a temperature of 300 K300\ \text{K}. Treat air as an ideal gas of molar mass 29 g mol−129\ \text{g mol}^{-1}. (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}, NA=6.02×1023 mol−1N_A = 6.02 \times 10^{23}\ \text{mol}^{-1})

    (a) How many moles of air are in the tank, and what is their mass?

    (b) How many molecules of air does the tank hold?

    (c) Find the rms speed of the air molecules in the tank.

    (d) Find the total translational kinetic energy of the air molecules in the tank. Would the answer change if the tank were filled with helium at the same pressure and temperature? Explain.

    Medium
    5 marks
  24. 24

    Question 24

    A student wants to test the law of equipartition of energy against measured data. She treats water vapour as a gas of rigid, bent (non-linear) molecules. She also takes helium (monatomic) and nitrogen (rigid diatomic) for comparison. The measured molar specific heats are given below (in J mol−1 K−1\text{J mol}^{-1}\ \text{K}^{-1}). Take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    GasCvC_vCpC_pγ\gamma
    He12.520.81.66
    N2_220.829.11.40
    H2_2O27.035.41.31

    (a) According to this model, what is the internal energy of 1 mol1\ \text{mol} of water vapour at 373 K373\ \text{K}?

    (b) Use the model to predict CvC_v, CpC_p and γ\gamma for water vapour.

    (c) Compare your predictions with the data for water vapour. What does the difference suggest about the water molecules?

    (d) Predict CvC_v, CpC_p and γ\gamma for helium and nitrogen, and say how well the law works for these two gases.

    Medium
    5 marks
  25. 25

    Question 25

    An argon-filled glove box used for handling reactive metals is kept at 1 atm1\ \text{atm} (1.013×105 Pa1.013 \times 10^5\ \text{Pa}) and 300 K300\ \text{K}. The diameter of an argon atom is 3.4×10−10 m3.4 \times 10^{-10}\ \text{m} and the molar mass of argon is 39.9 g mol−139.9\ \text{g mol}^{-1}. (kB=1.38×10−23 J K−1k_B = 1.38 \times 10^{-23}\ \text{J K}^{-1}, R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1})

    (a) Find the number density of argon atoms in the glove box.

    (b) Find the mean free path of an argon atom.

    (c) Find the rms speed of the argon atoms, and use it to estimate how many collisions an atom makes per second.

    (d) Estimate the average spacing between neighbouring atoms, and compare the mean free path with it. What does this tell you about the motion of an atom in the gas?

    Medium
    5 marks
  26. 26

    Question 26

    In a school laboratory, oxygen is prepared and collected over water in an inverted jar. The jar holds 250 mL250\ \text{mL} of gas at 300 K300\ \text{K}, and the total pressure of the gas in the jar equals the atmospheric pressure, 1.013×105 Pa1.013 \times 10^5\ \text{Pa}. The gas is saturated with water vapour, whose pressure at 300 K300\ \text{K} is 3.6×103 Pa3.6 \times 10^3\ \text{Pa}. (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}, NA=6.02×1023 mol−1N_A = 6.02 \times 10^{23}\ \text{mol}^{-1}, molar mass of O2_2 =32 g mol−1= 32\ \text{g mol}^{-1})

    (a) Find the partial pressure of the oxygen in the jar.

    (b) Find the number of moles and the mass of oxygen collected.

    (c) Find the number of oxygen molecules in the jar, and the percentage of all the molecules in the jar that are water molecules.

    (d) What volume would the oxygen alone (dry) occupy at 1.013×105 Pa1.013 \times 10^5\ \text{Pa} and 300 K300\ \text{K}?

    Medium
    5 marks
  27. 27

    Question 27

    A model of a gas uses a cubical box of edge L=10 cmL = 10\ \text{cm} (volume 1.0 L1.0\ \text{L}) filled with nitrogen. One nitrogen molecule (mass 4.65×10−26 kg4.65 \times 10^{-26}\ \text{kg}) is moving towards wall A with a velocity component vx=400 m s−1v_x = 400\ \text{m s}^{-1} perpendicular to the wall, as shown in the figure.

    Class 11 Physics Kinetic Theory

    (a) The molecule strikes wall A and rebounds elastically. Find the momentum it gives to the wall in this collision.

    (b) The box actually contains 2.45×10222.45 \times 10^{22} nitrogen molecules, and their rms speed is 515 m s−1515\ \text{m s}^{-1}. Taking the motion to be the same in all directions, find vx2‾\overline{v_x^2} and hence the pressure of the gas on wall A.

    Medium
    4 marks
  28. 28

    Question 28

    A thermometer maker wants to know how closely the atoms are packed in liquid mercury. The density of mercury is 13.6×103 kg m−313.6 \times 10^{3}\ \text{kg m}^{-3} and its molar mass is 200.6 g mol−1200.6\ \text{g mol}^{-1} (NA=6.02×1023 mol−1N_A = 6.02 \times 10^{23}\ \text{mol}^{-1}). Estimate the volume available to each mercury atom and the typical distance between neighbouring atoms. Compare this distance with the typical size of an atom, and state what this tells you about a liquid.

    Medium
    3 marks
  29. 29

    Question 29

    A student checks Boyle's law for a fixed mass of carbon dioxide, first at 300 K300\ \text{K} and then at 500 K500\ \text{K}. At low pressures the product PVPV stays nearly constant at both temperatures. At high pressures, however, PVPV at 300 K300\ \text{K} changes noticeably as the pressure is raised, while at 500 K500\ \text{K} it changes only a little. Explain both observations using the molecular picture of a gas, and state the conditions under which a real gas may be treated as ideal.

    Medium
    3 marks
  30. 30

    Question 30

    To understand averages in kinetic theory, a teacher imagines a tiny "gas" of only four identical molecules moving with speeds 11, 22, 33 and 4 m s−14\ \text{m s}^{-1}.

    Find the mean speed and the rms speed of these molecules. Show that the mean of the squares of the speeds is not equal to the square of the mean speed. Which of these averages is directly related to the temperature of a gas, and why?

    Medium
    3 marks
  31. 31

    Question 31

    Both carbon dioxide and sulphur dioxide are triatomic gases found in volcanic fumes at about 500 K500\ \text{K}. A CO2_2 molecule is straight (O=C=O), while an SO2_2 molecule is bent. Treating both as rigid molecules, find the number of degrees of freedom and the average energy of one molecule of each gas at 500 K500\ \text{K}. Explain why the two molecules have different numbers of rotational degrees of freedom. (kB=1.38×10−23 J K−1k_B = 1.38 \times 10^{-23}\ \text{J K}^{-1})

    Medium
    3 marks
  32. 32

    Question 32

    A rigid 10 L10\ \text{L} tank of oxygen in a laboratory is at 300 K300\ \text{K} and 2.0×105 Pa2.0 \times 10^5\ \text{Pa}. It is left in sunlight and its temperature rises by 50 K50\ \text{K}. Treat oxygen as an ideal gas of rigid diatomic molecules (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}). Find the amount of oxygen in the tank, the heat absorbed by the gas, and the final pressure in the tank.

    Medium
    3 marks
  33. 33

    Question 33

    A sealed, rigid glass flask of nitrogen is heated from 300 K300\ \text{K} to 600 K600\ \text{K}. A student claims that the mean free path of the molecules must increase because the molecules move faster. Is the student right? Explain. How would your answer change if the same heating were done in a cylinder with a free piston, so that the pressure stayed constant?

    Medium
    3 marks
  34. 34

    Question 34

    A few drops of a liquid perfume are poured into a beaker; they stay as a small pool at the bottom. The same amount of perfume vapour released into a closed jar quickly spreads to fill the whole jar. Explain this difference in terms of the molecules.

    Medium
    2 marks
  35. 35

    Question 35

    A sealed packet of potato chips, bought in a town on the plains, is found to be puffed up tight by the time the car reaches a hill station high up a mountain road. The temperature at both places is about the same. Explain why the packet swells.

    Medium
    2 marks
  36. 36

    Question 36

    The same amount of gas at the same temperature is put first into a cubical box and then into a long cylindrical tube of the same volume. A student expects the pressure to be different because the shapes are different. Explain, using kinetic theory, why the pressure is the same.

    Medium
    2 marks
  37. 37

    Question 37

    A sealed aerosol can is left in a hot car, and the pressure of the gas inside rises sharply, although no gas has been added and the can has not changed in size. Using kinetic theory, explain the two separate reasons why the pressure rises.

    Medium
    2 marks
  38. 38

    Question 38

    In a laboratory, one mole of argon and one mole of nitrogen, each in a closed rigid container, are heated so that their temperatures rise by the same amount. The nitrogen needs about two-thirds more heat than the argon. Explain why, using the law of equipartition of energy.

    Medium
    2 marks
  39. 39

    Question 39

    100 J100\ \text{J} of heat is given to 1.0 mol1.0\ \text{mol} of helium in two different ways: once in a sealed rigid tank, and once in a thin balloon that expands so that the pressure stays constant. Find the rise in temperature in each case (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}), and explain why it is smaller in the balloon.

    Medium
    2 marks
  40. 40

    Question 40

    Many filament lamps are filled with argon at nearly atmospheric pressure instead of being evacuated. The hot tungsten filament slowly loses atoms by evaporation. Using the idea of mean free path, explain how the argon helps the filament last longer and keeps the glass clear.

    Medium
    2 marks
  41. 41

    Question 41

    Two glass bulbs, of volumes 1.0 L1.0\ \text{L} and 2.0 L2.0\ \text{L}, are joined by a thin tube of negligible volume. They contain air at 1.0 atm1.0\ \text{atm} and 300 K300\ \text{K}. The 1.0 L1.0\ \text{L} bulb is then placed in an oil bath at 450 K450\ \text{K}, while the 2.0 L2.0\ \text{L} bulb is kept at 300 K300\ \text{K}. Treat the air as ideal.

    What is the final pressure in the bulbs, and what percentage of the air is now in the hot bulb?

    MCQHard
    1 mark
  42. 42

    Question 42

    A gas-discharge lamp is filled with a mixture of helium (M=4.0 g mol−1M = 4.0\ \text{g mol}^{-1}) and argon (M=39.9 g mol−1M = 39.9\ \text{g mol}^{-1}) in which there are three argon atoms for every helium atom. The gas is at 400 K400\ \text{K}. The rms speed of the mixture is defined as the square root of the mean of v2v^2 taken over all the atoms in the lamp. Take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    What is this rms speed?

    MCQHard
    1 mark
  43. 43

    Question 43

    A gas sample at a pressure of 1.0×105 Pa1.0 \times 10^{5}\ \text{Pa} and a temperature of 27 ∘C27\ ^{\circ}\text{C} is studied with a molecular-beam apparatus, which shows that the rms speed of its molecules is 500 m s−1500\ \text{m s}^{-1}. Take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    What are the density of the gas and its molar mass?

    MCQHard
    1 mark
  44. 44

    Question 44

    Imagine an ideal sealed, rigid vessel (in practice the conditions are reached briefly in a shock tube) containing hydrogen gas (H2\text{H}_2) at 2000 K2000\ \text{K} and 1.0×105 Pa1.0 \times 10^{5}\ \text{Pa}. It is heated to 5000 K5000\ \text{K}, at which temperature half of the H2\text{H}_2 molecules have split into hydrogen atoms (H2→2H\text{H}_2 \rightarrow 2\text{H}). Treat the contents as an ideal-gas mixture; the molar mass of atomic hydrogen is 1.0 g mol−11.0\ \text{g mol}^{-1} and R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    What is the pressure in the vessel at 5000 K5000\ \text{K}, and what is the rms speed of the hydrogen atoms?

    MCQHard
    1 mark
  45. 45

    Question 45

    In a shock-tube experiment, 1.0 mol1.0\ \text{mol} of a diatomic gas is held at constant volume at 2000 K2000\ \text{K}. It is found that 291 J291\ \text{J} of heat raises its temperature to 2010 K2010\ \text{K}. Treat the gas as ideal and use the law of equipartition of energy (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}).

    How much of the internal energy of the gas at 2000 K2000\ \text{K} is stored in the vibration of its molecules?

    MCQHard
    1 mark
  46. 46

    Question 46

    Nitrogen (rigid diatomic molecules) at 300 K300\ \text{K} is in a thermally insulated cylinder. The piston is slammed inwards and immediately locked. Just after this, the average translational kinetic energy of the molecules corresponds to a temperature of 390 K390\ \text{K}, but their rotational energy is still that of 300 K300\ \text{K}, because the piston pushes only on the motion of the molecules as a whole. The volume then stays fixed while collisions between molecules share out the energy. Treat the gas as ideal.

    What is the final temperature of the gas, and how does its pressure change after the piston is locked?

    MCQHard
    1 mark
  47. 47

    Question 47

    A gas whose molecules are rigid and non-linear (3 translational and 3 rotational degrees of freedom, no vibration) is held in a cylinder under a freely moving piston. 2.0 mol2.0\ \text{mol} of it is heated slowly at constant pressure from 300 K300\ \text{K} to 330 K330\ \text{K}. Treat the gas as ideal and use the law of equipartition of energy (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}).

    How much of the heat supplied goes into the rotational kinetic energy of the molecules?

    MCQHard
    1 mark
  48. 48

    Question 48

    A cylinder contains 1.5 mol1.5\ \text{mol} of methane, whose molecules may be treated as rigid and non-linear (no vibration). Starting at 300 K300\ \text{K}, the gas is first heated with the piston locked until it reaches 400 K400\ \text{K}. The piston is then released, so that it moves freely against a constant outside pressure equal to the gas pressure at that moment, and heating continues until 500 K500\ \text{K}. Use the law of equipartition of energy and R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    How much work does the gas do in the second stage, and what is the total change in its internal energy over both stages?

    MCQHard
    1 mark
  49. 49

    Question 49

    An engineer must choose a gas to fill a sealed, rigid heat-buffer chamber. For a fixed mass of gas, she wants it to absorb as much heat as possible for each kelvin rise in temperature. She compares helium (M=4.0 g mol−1M = 4.0\ \text{g mol}^{-1}) with nitrogen (M=28 g mol−1M = 28\ \text{g mol}^{-1}, molecules rigid), treating both as ideal and using the law of equipartition of energy.

    How many times the specific heat (per kilogram) of nitrogen is that of helium?

    MCQHard
    1 mark
  50. 50

    Question 50

    A 1.0 kg1.0\ \text{kg} copper block (molar mass 63.5 g mol−163.5\ \text{g mol}^{-1}) is warmed from 295 K295\ \text{K} to 305 K305\ \text{K} at atmospheric pressure. Its measured specific heat is 386 J kg−1 K−1386\ \text{J kg}^{-1}\ \text{K}^{-1}. Treat each copper atom as vibrating independently about its mean position in three dimensions, and use the law of equipartition of energy (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}).

    How much heat does this model predict for the warming?

    MCQHard
    1 mark
  51. 51

    Question 51

    A gas in a cylinder is at 300 K300\ \text{K} and 1.0 atm1.0\ \text{atm}. It is compressed by a piston and heated at the same time, and ends at 600 K600\ \text{K} and 4.0 atm4.0\ \text{atm}. Take the number of collisions a molecule suffers per second as vrms/lv_{\text{rms}}/l, where ll is the mean free path, and treat the molecular diameter as fixed.

    How do the mean free path and the collision rate per molecule change?

    MCQHard
    1 mark
  52. 52

    Question 52

    At a height of 100 km100\ \text{km} above the Earth, the density of air is 5.6×10−7 kg m−35.6 \times 10^{-7}\ \text{kg m}^{-3} and its temperature is 195 K195\ \text{K} (given). Treat the air as an ideal gas of molar mass 29 g mol−129\ \text{g mol}^{-1} whose molecules have diameter 3.6×10−10 m3.6 \times 10^{-10}\ \text{m}. Use NA=6.02×1023 mol−1N_A = 6.02 \times 10^{23}\ \text{mol}^{-1}, R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}, and take vrmsv_{\text{rms}} as the typical speed of a molecule.

    What are the mean free path of the molecules there, and the number of collisions one molecule makes per second?

    MCQHard
    1 mark
  53. 53

    Question 53

    A gas syringe in an oven at 400 K400\ \text{K} contains 4.0 L4.0\ \text{L} of hydrogen and 3.0 L3.0\ \text{L} of oxygen at atmospheric pressure. A spark makes them react completely to form water, which stays as vapour at this temperature. The plunger moves freely, and after the reaction the contents return to 400 K400\ \text{K} and atmospheric pressure. Treat all gases as ideal.

    What is the final volume of gas in the syringe, and what percentage of its molecules are oxygen?

    MCQHard
    1 mark
  54. 54

    Question 54

    In a gas at STP (273 K273\ \text{K}, 1.0 atm1.0\ \text{atm}), the mean spacing between neighbouring molecules is 3.34 nm3.34\ \text{nm}, about 1717 times the molecular diameter d=2.0×10−10 md = 2.0 \times 10^{-10}\ \text{m} (given). The gas is compressed at 273 K273\ \text{K}; assume it stays ideal.

    At what pressure does the mean spacing between neighbouring molecules fall to 5d5d?

    MCQHard
    1 mark
  55. 55

    Question 55

    A gas in a cylinder stands in a large water bath. Its piston is pushed in very slowly until the volume is halved, the gas staying at the temperature of the bath throughout.

    What happens to the rms speed of the molecules, the pressure, and the number of molecules striking each square metre of the wall per second?

    MCQHard
    1 mark
  56. 56

    Question 56

    An oxygen molecule can be treated as a rigid dumbbell. Its moment of inertia about each of the two axes through its centre and perpendicular to the bond is I=1.94×10−46 kg m2I = 1.94 \times 10^{-46}\ \text{kg m}^{2} (given); rotation about the bond itself does not count. Oxygen gas is at 300 K300\ \text{K}; take kB=1.38×10−23 J K−1k_B = 1.38 \times 10^{-23}\ \text{J K}^{-1}.

    What are the average rotational kinetic energy of a molecule and its rms angular speed of rotation?

    MCQHard
    1 mark
  57. 57

    Question 57

    A uniform glass capillary tube, 60 cm60\ \text{cm} long and closed at one end, holds a column of air trapped by a thread of mercury 10 cm10\ \text{cm} long. With the open end up, the air column is 20 cm20\ \text{cm} long, as shown in (i). The tube is then turned slowly until its open end points straight down, as in (ii) (not to scale); no mercury spills and the temperature stays constant. The atmospheric pressure is 76 cm76\ \text{cm} of mercury.

    Class 11 Physics Kinetic Theory

    What is the length of the air column in position (ii)?

    MCQHard
    1 mark
  58. 58

    Question 58

    Two identical balloons at the same temperature are filled, one with 1.0 g1.0\ \text{g} of helium (M=4.0 g mol−1M = 4.0\ \text{g mol}^{-1}) and the other with 1.0 g1.0\ \text{g} of oxygen (M=32 g mol−1M = 32\ \text{g mol}^{-1}, molecules rigid). Treat both as ideal gases and use the law of equipartition of energy.

    What are the ratios (helium : oxygen) of the total translational kinetic energy of the gas, and of its total internal energy?

    MCQHard
    1 mark
  59. 59

    Question 59

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): A gas in a thermally insulated cylinder warms up when it expands by pushing a piston outward.

    Reason (R): Gas molecules that rebound elastically from a piston moving away from them come back with a larger speed than they had before the collision.

    MCQHard
    1 mark
  60. 60

    Question 60

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The molar specific heat at constant volume of a rigid diatomic ideal gas is 52R\frac{5}{2}R.

    Reason (R): The mean free path of a gas molecule decreases when the number density of the gas increases.

    MCQHard
    1 mark
  61. 61

    Question 61

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): For an ideal gas in equilibrium, collisions between the molecules make the pressure on the walls smaller than it would be without them, because molecules knocked aside on their way to a wall never reach it.

    Reason (R): When two gas molecules collide elastically, their total momentum changes.

    MCQHard
    1 mark
  62. 62

    Question 62

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Two samples of the same gas at the same temperature, one at 1 atm1\ \text{atm} and the other at 10 atm10\ \text{atm}, have different rms speeds of their molecules.

    Reason (R): The pressure of a gas depends only on its number density.

    MCQHard
    1 mark
  63. 63

    Question 63

    A 10.0 L10.0\ \text{L} steel vessel contains 0.20 mol0.20\ \text{mol} of hydrogen (M=2.0 g mol−1M = 2.0\ \text{g mol}^{-1}) and 0.20 mol0.20\ \text{mol} of oxygen (M=32 g mol−1M = 32\ \text{g mol}^{-1}) at 300 K300\ \text{K}. A pinhole forms in its wall, so small that molecules escape through it one at a time without disturbing the gas inside. The rate at which molecules of each kind reach the hole and pass through it is proportional to the number of them present and to their typical speed. Take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1} and kB=1.38×10−23 J K−1k_B = 1.38 \times 10^{-23}\ \text{J K}^{-1}.

    (a) Find the partial pressure of each gas and the total pressure in the vessel.

    (b) Find the rms speed of each kind of molecule and the average translational kinetic energy of a molecule of each gas.

    (c) Just after the leak starts, what fraction of the escaping molecules are hydrogen, and what fraction of the escaping mass is hydrogen?

    (d) Explain how the composition of the gas left in the vessel changes as the leak goes on, why this happens even though both gases are at the same temperature, and how the same effect, repeated over many stages, is used to separate the isotopes of an element.

    Hard
    5 marks
  64. 64

    Question 64

    One mole of hydrogen in a sealed, rigid container is heated from 50 K50\ \text{K} to 3000 K3000\ \text{K}. In a simplified step model of the measured behaviour, take its molar specific heat at constant volume as 32R\frac{3}{2}R from 50 K50\ \text{K} to 100 K100\ \text{K}, 52R\frac{5}{2}R from 100 K100\ \text{K} to 1000 K1000\ \text{K} and 72R\frac{7}{2}R from 1000 K1000\ \text{K} to 3000 K3000\ \text{K}. Treat each change as a sudden step and the gas as ideal (R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}).

    (a) Find the heat needed for the whole warming.

    (b) Sketch CvC_v (in units of RR) against TT, and use the law of equipartition of energy to say which kinds of molecular motion take up energy in each range.

    (c) Find γ=Cp/Cv\gamma = C_p/C_v in each range.

    (d) A student assumes that all the degrees of freedom of the molecule take up energy at every temperature, so that Cv=72RC_v = \frac{7}{2}R throughout. By what percentage does the student overestimate the heat needed? What does this tell us about the law of equipartition?

    Hard
    5 marks
  65. 65

    Question 65

    A molecular-beam apparatus is a tube 1.0 m1.0\ \text{m} long and 0.20 m0.20\ \text{m} wide. Nitrogen molecules leave a source at one end and must reach a detector at the other end without colliding with the residual nitrogen in the tube, which is at 300 K300\ \text{K}. Take the diameter of a nitrogen molecule as 3.7×10−10 m3.7 \times 10^{-10}\ \text{m}, M=28 g mol−1M = 28\ \text{g mol}^{-1}, kB=1.38×10−23 J K−1k_B = 1.38 \times 10^{-23}\ \text{J K}^{-1} and R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    (a) Find the largest number density of residual gas for which the mean free path is at least 1.0 m1.0\ \text{m}.

    (b) Find the corresponding largest pressure, in pascal and in atmospheres (1 atm=1.013×105 Pa1\ \text{atm} = 1.013 \times 10^{5}\ \text{Pa}).

    (c) At this pressure, find the rms speed of the molecules and the average time between successive collisions of one molecule (use vrmsv_{\text{rms}} as the typical speed).

    (d) The pump actually reaches 1.0×10−4 Pa1.0 \times 10^{-4}\ \text{Pa}. Find the mean free path now, and compare the number of collisions a residual molecule makes per second with other molecules and with the walls of the tube. What does this say about the idea of a mean free path in such a tube?

    Hard
    5 marks
  66. 66

    Question 66

    Divers often breathe "nitrox", a mixture in which 32%32\% of the molecules are oxygen and 68%68\% are nitrogen, instead of air (21%21\% oxygen, 79%79\% nitrogen by number of molecules). The breathing gas is always delivered at the pressure of the surrounding water, which is 1.0 atm1.0\ \text{atm} at the surface and rises by 1.0 atm1.0\ \text{atm} for every 10 m10\ \text{m} of depth. To avoid oxygen poisoning, the partial pressure of oxygen must not exceed 1.4 atm1.4\ \text{atm}. The amount of nitrogen dissolved in a diver's blood increases with the partial pressure of nitrogen (given). Take the gas temperature as 300 K300\ \text{K}, 1 atm=1.013×105 Pa1\ \text{atm} = 1.013 \times 10^{5}\ \text{Pa}, kB=1.38×10−23 J K−1k_B = 1.38 \times 10^{-23}\ \text{J K}^{-1}.

    (a) Find the partial pressures of oxygen and of nitrogen in the nitrox breathed at a depth of 30 m30\ \text{m}.

    (b) Find the greatest depth at which nitrox may be breathed without exceeding the oxygen limit.

    (c) Find the number of oxygen molecules per cubic metre in the nitrox breathed at 30 m30\ \text{m}, and compare it with that in air at the surface.

    (d) Find the oxygen-limited depth for air. Explain why divers still prefer nitrox for dives to about 30 m30\ \text{m}, although air could be breathed safely as far as oxygen is concerned to a much greater depth.

    Hard
    5 marks
  67. 67

    Question 67

    The ratio of specific heats of a polyatomic gas, measured at 400 K400\ \text{K}, is γ=1.20\gamma = 1.20. Its molecules are non-linear, and the gas behaves ideally. Use the law of equipartition of energy and R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    (a) Show that the measurement implies that two vibrational modes of the molecule are active.

    (b) Find CvC_v and CpC_p of the gas.

    (c) Find the internal energy of 2.0 mol2.0\ \text{mol} of the gas at 400 K400\ \text{K}, and how it is shared among translation, rotation and vibration.

    Hard
    4 marks
  68. 68

    Question 68

    A student burns carbon in limited and in plentiful supplies of oxygen and weighs the oxides formed:

    ExperimentMass of carbon (g)Mass of oxide (g)Oxide
    10.902.10X
    22.104.90X
    31.505.50Y

    (a) Show that the data obey Dalton's law of definite proportions for X.

    (b) Show that X and Y together obey the law of multiple proportions.

    (c) Using atoms of carbon (12 u12\ \text{u}) and oxygen (16 u16\ \text{u}), identify X and Y and explain why these laws must hold if matter is made of atoms.

    Hard
    3 marks
  69. 69

    Question 69

    Dry air consists of 78%78\% nitrogen (28.0 g mol−128.0\ \text{g mol}^{-1}), 21%21\% oxygen (32.0 g mol−132.0\ \text{g mol}^{-1}) and 1%1\% argon (39.9 g mol−139.9\ \text{g mol}^{-1}) by number of molecules. A laboratory needs its density at 27 ∘C27\ ^{\circ}\text{C} and 1.013×105 Pa1.013 \times 10^{5}\ \text{Pa}. Take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1}.

    (a) Find the partial pressure of each gas.

    (b) Find the mean molar mass of dry air and its density under these conditions.

    (c) On a humid day, some of the air molecules are replaced by water molecules (18.0 g mol−118.0\ \text{g mol}^{-1}) at the same temperature and pressure. Is humid air denser or less dense than dry air? Explain using Avogadro's law.

    Hard
    3 marks
  70. 70

    Question 70

    A room of volume 75 m375\ \text{m}^{3} in a hill station is filled with air at 8.0×104 Pa8.0 \times 10^{4}\ \text{Pa} and 290 K290\ \text{K}.

    (a) Using kinetic theory, find an expression for the total translational kinetic energy of the molecules in each cubic metre in terms of the pressure PP, and evaluate it.

    (b) Find the total translational kinetic energy of the air in the room.

    (c) The room is heated to 300 K300\ \text{K}. Air leaks in and out through gaps around the door, so the pressure stays at 8.0×104 Pa8.0 \times 10^{4}\ \text{Pa}. Show that the total translational kinetic energy of the air in the room does not change, and explain why this huge store of energy cannot be turned into useful work, for example to drive a fan, inside the room.

    Hard
    3 marks
  71. 71

    Question 71

    In a vacuum chamber, a beam of argon atoms (M=39.9 g mol−1M = 39.9\ \text{g mol}^{-1}) contains 1.0×10201.0 \times 10^{20} atoms per cubic metre, all moving with the same velocity of magnitude 400 m s−1400\ \text{m s}^{-1}. The beam strikes a flat plate and every atom rebounds elastically. Take NA=6.02×1023 mol−1N_A = 6.02 \times 10^{23}\ \text{mol}^{-1}.

    (a) Find the pressure on the plate when the beam strikes it normally.

    (b) Find the pressure when the beam strikes the plate at 60∘60^{\circ} to the normal (the beam still covers the whole plate).

    (c) An ordinary gas of argon has the same number density and an rms speed of 400 m s−1400\ \text{m s}^{-1}. Find the pressure it exerts on the plate, and explain why it is smaller than the result of (a) by a factor of 6.

    Hard
    3 marks
  72. 72

    Question 72

    Two identical vessels at the same temperature and pressure contain hydrogen (molecular diameter 2.7×10−10 m2.7 \times 10^{-10}\ \text{m}, M=2.0 g mol−1M = 2.0\ \text{g mol}^{-1}) and carbon dioxide (molecular diameter 4.6×10−10 m4.6 \times 10^{-10}\ \text{m}, M=44 g mol−1M = 44\ \text{g mol}^{-1}). Use vrmsv_{\text{rms}} as the typical speed.

    (a) Find the ratio of the mean free path of hydrogen molecules to that of carbon dioxide molecules.

    (b) Find the ratio of their rms speeds.

    (c) Find the ratio of the number of collisions per second suffered by a hydrogen molecule to that suffered by a carbon dioxide molecule, and explain why the hydrogen molecule collides more often although its mean free path is longer.

    Hard
    3 marks
  73. 73

    Question 73

    A constant-pressure gas thermometer holds a fixed amount of dry air at 1.013×105 Pa1.013 \times 10^{5}\ \text{Pa}. Its volume is 50.0 cm350.0\ \text{cm}^{3} at 20.0 ∘C20.0\ ^{\circ}\text{C} and 60.24 cm360.24\ \text{cm}^{3} at 80.0 ∘C80.0\ ^{\circ}\text{C}. Take R=8.31 J mol−1 K−1R = 8.31\ \text{J mol}^{-1}\ \text{K}^{-1} and treat the air as ideal.

    (a) Find the Celsius temperature at which the volume would extrapolate to zero.

    (b) Placed in a freezer, the thermometer reads 41.5 cm341.5\ \text{cm}^{3}. Find the temperature of the freezer.

    (c) Find the amount of air in the thermometer.

    Hard
    3 marks
  74. 74

    Question 74

    A student calculates that a nitrogen molecule (M=28 g mol−1M = 28\ \text{g mol}^{-1}) moving at 600 m s−1600\ \text{m s}^{-1} "has a temperature" of 404 K404\ \text{K}, by putting its speed into the formula for vrmsv_{\text{rms}}.

    (a) Explain why it is not meaningful to speak of the temperature of a single molecule in a gas.

    (b) A narrow beam of nitrogen molecules in a vacuum consists of molecules all moving at 600 m s−1600\ \text{m s}^{-1} in exactly the same direction. Does the beam have a temperature of 404 K404\ \text{K}? Explain.

    (c) What, then, does the temperature of a gas measure?

    Hard
    3 marks
  75. 75

    Question 75

    In nitrogen at 300 K300\ \text{K} sound travels at about 353 m s−1353\ \text{m s}^{-1}, while the rms speed of nitrogen molecules is about 1.51.5 times as large. In hydrogen at the same temperature sound travels about 3.73.7 times as fast as in nitrogen. Using the molecular picture, explain why the speed of sound in a gas is of the same order as vrmsv_{\text{rms}} but somewhat smaller, and why it is so much larger in hydrogen.

    Hard
    2 marks
  76. 76

    Question 76

    Argon atoms adsorbed on a flat crystal surface can glide freely along the surface in any direction, but cannot leave it or move perpendicular to it. Treat the adsorbed layer as a two-dimensional ideal gas in equilibrium with the crystal at temperature TT. Using the law of equipartition of energy, find the average energy of an adsorbed atom and the molar heat capacity of the layer, and explain how and why they differ from those of argon gas.

    Hard
    2 marks
  77. 77

    Question 77

    Measured molar specific heats (in J mol−1 K−1\text{J mol}^{-1}\ \text{K}^{-1}) are: helium Cv=12.5C_v = 12.5, Cp=20.8C_p = 20.8; nitrogen Cv=20.8C_v = 20.8, Cp=29.1C_p = 29.1; methane Cv=27.1C_v = 27.1, Cp=35.4C_p = 35.4. Although CvC_v differs widely among these gases, Cp−CvC_p - C_v is close to 8.3 J mol−1 K−18.3\ \text{J mol}^{-1}\ \text{K}^{-1} for all three. Explain, with a molecular picture, why Cp−Cv=RC_p - C_v = R for every ideal gas, whatever its degrees of freedom.

    Hard
    2 marks
  78. 78

    Question 78

    A student applies the kinetic-theory formula for the mean free path to liquid water, with n=3.3×1028 m−3n = 3.3 \times 10^{28}\ \text{m}^{-3} and d=2×10−10 md = 2 \times 10^{-10}\ \text{m}, and finds a "mean free path" of 1.7×10−10 m1.7 \times 10^{-10}\ \text{m}. Explain why this result is meaningless, and why the idea of a mean free path is useful for gases but not for liquids.

    Hard
    2 marks
  79. 79

    Question 79

    Water always contains hydrogen and oxygen in the mass ratio 1:81 : 8, and it is formed when 22 volumes of hydrogen combine with 11 volume of oxygen, both measured at the same temperature and pressure. Given that hydrogen and oxygen molecules are diatomic, use Avogadro's law to find the relative atomic mass of oxygen, taking that of hydrogen as 11.

    Hard
    2 marks
  80. 80

    Question 80

    A CO2\text{CO}_2 cylinder at 20 ∘C20\ ^{\circ}\text{C} contains liquid CO2\text{CO}_2 with gas above it. As gas is drawn off for use, its pressure gauge stays almost steady at about 57 atm57\ \text{atm} until the liquid has all evaporated; only then does the pressure fall steadily. Explain why PV=μRTPV = \mu RT cannot describe the gas in the cylinder while liquid is present, and why the ideal gas law fails near the point where a gas liquefies.

    Hard
    2 marks