Opening your dashboard
Class 11 Chemistry Chapter 8 Hydrocarbon: Competency-Based Questions (CBQ)
80 questions on Chapter 8, each worked through on its own page with the AI tutor. Class 11 Chemistry, CBSE 2026-27.
80 questions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
A restaurant kitchen changes its burners from piped CNG (taken as pure methane) to LPG (taken as pure butane). The technician explains that the air holes of each burner must be widened, because each mole of fuel gas now needs much more dioxygen for complete combustion. How many times more dioxygen does one mole of butane need than one mole of methane?
- 21 mark
Question 2
A fuel-testing laboratory needs a sample of 2,3-dimethylbutane, a branched alkane used as a high-octane reference fuel. The chemist decides to make it by the Wurtz reaction (sodium in dry ether), using a single alkyl halide so that no mixture of alkanes is formed. Which alkyl halide should be used?
- 31 mark
Question 3
A drum of laboratory "hexane" turns out to contain a branched C₆H₁₄ isomer as an impurity. When a sample is treated with potassium permanganate, n-hexane is unaffected but the impurity is converted into 3-methylpentan-3-ol, (C₂H₅)₂C(OH)CH₃. Which isomer is the impurity?
- 41 mark
Question 4
A chemical plant makes ethanoic acid by the controlled oxidation of ethane with a regulated supply of dioxygen in the presence of manganese acetate, (CH₃COO)₂Mn. What mass of dioxygen is needed to oxidise 30 kg of ethane completely to ethanoic acid by this reaction? (Molar masses: C₂H₆ = 30 g mol⁻¹, O₂ = 32 g mol⁻¹)
- 51 mark
Question 5
In a refinery, the heavy alkane hexadecane, C₁₆H₃₄, is cracked by heating with a catalyst. One molecule breaks into a molecule of octane (C₈H₁₈), a molecule of propene (C₃H₆) and one molecule of a third hydrocarbon X. What is the molecular formula of X?
- 61 mark
Question 6
A student builds a model of ethane and turns the rear carbon to four different positions, drawing a Newman projection each time:

Which order lists the four conformations from the most stable to the least stable?
- 71 mark
Question 7
A cracked petroleum fraction contains all 13 structurally different open-chain alkenes of formula C₆H₁₂. An analyst knows that cis and trans isomers have different boiling points and therefore give separate peaks. How many of the 13 structural isomers can exist as a pair of geometrical (cis-trans) isomers?
- 81 mark
Question 8
A solvent company wants to make the tertiary alcohol 2-methylbutan-2-ol, (CH₃)₂C(OH)–CH₂CH₃, by adding water to an alkene in the presence of a few drops of concentrated sulphuric acid. Which alkene(s) can be used to give this alcohol as the main product?
I. 2-Methylbut-1-ene, CH₂=C(CH₃)–CH₂CH₃
II. 2-Methylbut-2-ene, (CH₃)₂C=CH–CH₃
III. Pent-1-ene, CH₂=CH–CH₂CH₂CH₃
- 91 mark
Question 9
A fragrance chemist needs pure propanal, CH₃CH₂CHO, and plans to make it by ozonolysis (O₃, then Zn/H₂O) of a single C₆H₁₂ alkene, so that no other carbonyl compound has to be separated. Which alkene should be used?
- 101 mark
Question 10
A paint-thinner supplier labels a drum only as "aromatic hydrocarbon, C₈H₁₀". A quality-control chemist nitrates a sample under mild conditions so that one nitro group enters the ring, and finds that only one ring-substituted mononitro compound is formed. Which compound is in the drum?
- 111 mark
Question 11
A student wants to confirm that a sample of pent-1-en-4-yne is a terminal alkyne. On adding sodamide (NaNH₂), ammonia is evolved and a sodium salt is formed. The carbons of the molecule are numbered below.

Which hydrogen has been removed by the sodamide?
- 121 mark
Question 12
The ethene used to make polythene must be almost free of ethyne, because even traces of ethyne spoil the polymerisation catalyst. A plant engineer has to remove about 0.5% ethyne from an ethene stream without losing ethene. Which treatment of the gas stream achieves this?
- 131 mark
Question 13
Many insect sex pheromones are alkenes whose activity depends on whether the double bond is cis or trans. A chemist making a pheromone analogue treats dec-5-yne, CH₃(CH₂)₃–C≡C–(CH₂)₃CH₃, with sodium in liquid ammonia. What is the main product?
- 141 mark
Question 14
Vinylacetylene, CH₂=CH–C≡CH (IUPAC name but-1-en-3-yne), is made by joining two ethyne molecules and was the starting material for the synthetic rubber neoprene. What is the hybridisation of C1, C2, C3 and C4 in this molecule, in that order?
- 151 mark
Question 15
A process chemist sets up four electrophilic substitution reactions on benzene in a pilot plant, using these reagents:
P: concentrated HNO₃ + concentrated H₂SO₄
Q: Cl₂ + anhydrous FeCl₃
R: CH₃Cl + anhydrous AlCl₃
S: oleum (fuming sulphuric acid)
Which option correctly matches each reagent with the electrophile that actually attacks the ring?
- 161 mark
Question 16
1-Bromo-4-methoxybenzene is an intermediate in the synthesis of several drugs. A chemist treats methoxybenzene (anisole), C₆H₅–OCH₃, with bromine in the presence of anhydrous FeBr₃. Which statement correctly describes the result?
- 171 mark
Question 17
When benzene is chlorinated with Cl₂ and anhydrous FeCl₃, the electrophile Cl⁺ bonds to one ring carbon, which we call C1, to form a carbocation (arenium ion or σ-complex). Which carbons carry the positive charge in the resonance structures of this arenium ion?
- 181 mark
Question 18
Fat dripping onto glowing charcoal during a barbecue burns incompletely, and the smoke deposits polynuclear aromatic hydrocarbons on the food. Which of the following belongs to the class of hydrocarbons described as carcinogenic, that is, those having more than two benzene rings fused together?
- 191 mark
Question 19
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
(Bond enthalpies: C=C in ethene ; C–C in ethane .)
Assertion (A): The bond enthalpy of the C=C bond in ethene is more than twice the bond enthalpy of the C–C bond in ethane.
Reason (R): In a C=C bond, the π bond is stronger than the σ bond, because sideways overlap of p orbitals is more effective than head-on (axial) overlap.
- 201 mark
Question 20
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): When a refinery heats n-hexane with anhydrous aluminium chloride and hydrogen chloride gas, the major product is benzene.
Reason (R): Among isomeric alkanes, the branched-chain isomers have higher boiling points than the straight-chain isomer.
- 211 mark
Question 21
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): Ethyne, the fuel in the oxyacetylene welding torch, is a linear molecule with an H–C–C bond angle of 180°.
Reason (R): The two π bonds in ethyne are formed by the sideways overlap of the sp hybrid orbitals of the two carbon atoms.
- 221 mark
Question 22
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): In a dye works, methylbenzene (toluene) is nitrated more slowly than benzene under the same conditions.
Reason (R): The methyl group withdraws electron density from the benzene ring by its inductive effect.
- 235 marks
Question 23
Ripening fruit gives off ethene, which speeds up the ripening of other fruit in the same store. A cold store therefore keeps sachets of potassium permanganate on an inert support to remove ethene from the air. The air in the store also contains nitrogen, carbon dioxide and traces of ethane.
(a) Write the equation for the reaction of ethene with cold, dilute aqueous KMnO₄, and name the organic product.
(b) Explain why the sachet removes ethene but leaves the ethane in the air unchanged.
(c) In this reaction, 2 mol of KMnO₄ oxidise 3 mol of ethene. Calculate the minimum mass of KMnO₄ needed to remove 5.6 g of ethene. (Molar masses: C₂H₄ = 28.05 g mol⁻¹, KMnO₄ = 158.0 g mol⁻¹)
(d) The purple sachets slowly turn brown. Explain the colour change, and suggest a simple test that a store manager could use to check whether ethene is still present in a sample of the store air.
- 245 marks
Question 24
A city gas company wants to sell natural gas (taken as pure methane) not only as a fuel but also as a raw material for chemicals.
(a) Write the equation, with conditions, for the reaction of methane with steam used to make dihydrogen industrially. Calculate the mass of dihydrogen that can be obtained from 1.00 kg of methane. (Molar masses: CH₄ = 16.04 g mol⁻¹, H₂ = 2.016 g mol⁻¹)
(b) Write equations, with conditions, for the controlled oxidation of methane to (i) methanol and (ii) methanal.
(c) The enthalpy of combustion of methane is −890 kJ mol⁻¹. Calculate the heat released when 1.00 kg of methane burns completely.
(d) When the air supply to a methane flame is reduced, a black solid is deposited. Name it, write the equation for its formation, and give one use of this substance.
- 255 marks
Question 25
A welding workshop in a small town makes its own ethyne (acetylene) in a "carbide generator", where water drips slowly onto lumps of calcium carbide. The calcium carbide is manufactured from limestone and coke. Take the molar volume of a gas at STP as 22.7 L mol⁻¹ and molar masses (g mol⁻¹): Ca = 40.08, C = 12.01.
(a) Write the equation for the first step, the heating of limestone, and state the overall mole relationship between the limestone used and the ethyne finally obtained, assuming every step is complete.
(b) A 5.00 kg drum of commercial carbide contains 80.0% CaC₂ by mass; the rest does not react with water. Calculate the volume of ethyne at STP that the drum can produce.
(c) In the torch, ethyne burns completely in pure oxygen. Calculate the volume of oxygen at STP needed to burn all the ethyne from (b), and the heat released. The enthalpy of combustion of ethyne is −1300 kJ mol⁻¹.
(d) Calculate the minimum mass of coke (take it as pure carbon) needed to make the CaC₂ present in the drum.
- 265 marks
Question 26
In one industrial route to the painkiller ibuprofen, the first step is a Friedel–Crafts reaction between (2-methylpropyl)benzene and ethanoyl chloride, shown below.

(a) Identify the electrophile and write an equation showing how anhydrous AlCl₃ generates it.
(b) Write the steps by which the electrophile substitutes the ring, naming the intermediate formed.
(c) Write the structure of the major product P and explain why the new group enters mainly at the position para to the (2-methylpropyl) group.
(d) This acylation stops cleanly after one group has entered. Explain why.
- 274 marks
Question 27
A teaching laboratory wants to make cyclohexene, C₆H₁₀, and considers three starting materials. The reagents are left blank in the scheme below.

(a) Identify reagents P, Q and R and name the type of reaction in each route.
(b) Write the equation for route Q.
(c) A student suggests using chlorocyclohexane or iodocyclohexane instead of bromocyclohexane in the first route. Arrange the three halides in order of their rate of reaction with reagent P.
(d) 1-Bromo-1-methylcyclohexane reacts with reagent P faster than bromocyclohexane does. Explain this using the NCERT order of reactivity of alkyl groups.
- 283 marks
Question 28
A store finds an old drum labelled only "octene, C₈H₁₆, straight chain". To find where the double bond is, a chemist oxidises a sample with acidified potassium permanganate and obtains butanoic acid, CH₃CH₂CH₂COOH, as the only organic product.
(a) Deduce the structure and IUPAC name of the alkene. Explain why oct-2-ene is ruled out.
(b) State whether this alkene can exist as cis and trans isomers. Give a reason.
(c) Write the structure and IUPAC name of the product formed when this alkene reacts with Br₂ in CCl₄.
- 293 marks
Question 29
Isooctane, (CH₃)₃C–CH₂–CH(CH₃)₂, is the standard fuel given an octane rating of 100. Industrially it is made by hydrogenating "diisobutylene", a mixture of the two alkenes I and II shown below.

(a) Write the IUPAC name and molecular formula of isooctane, and state how it is related to n-octane.
(b) Write the IUPAC names of alkenes I and II and explain why hydrogenating the mixture gives a single alkane. Give the conditions.
(c) Show how ozonolysis could tell a sample of pure I from a sample of pure II.
- 303 marks
Question 30
A pest-control laboratory keeps a sample of pure cis-hept-3-ene, CH₃CH₂–CH=CH–CH₂CH₂CH₃, as a reference compound for an insect pheromone. The trans isomer is slightly more stable, yet the stored sample stays cis for years at room temperature.
(a) Describe the bonding between C-3 and C-4 (hybridisation, types of bond, bond angle) and compare its length with a C–C single bond.
(b) Explain why the cis isomer does not change into the trans isomer at room temperature, even though rotation about the C–C bond of ethane takes place freely. Use energy values from NCERT in your answer.
(c) Which atoms of hept-3-ene must lie in one plane? Explain.
- 313 marks
Question 31
Anthracene and phenanthrene are isomers, C₁₄H₁₀, both obtained from coal tar and used to make dyes. A student wants to compare them with cyclobutadiene, a ring that has never been isolated as a stable compound at room temperature. Assume all three are planar with every ring carbon sp² hybridised.

For each of (I), (II) and (III), count the π electrons in the ring system, apply Hückel's rule (state the value of n where it applies), and decide whether the system is aromatic.
- 323 marks
Question 32
Many household detergents are sodium salts of alkylbenzenesulphonic acids. A detergent plant carries out the sequence below.

(a) Give the structure and name of the major product A, and of B.
(b) State why the –SO₃H group enters mainly at the position para to the dodecyl chain.
(c) Calculate the mass of sodium hydroxide needed to neutralise 2.00 kg of A completely. Molar masses (g mol⁻¹): C = 12.01, H = 1.008, O = 16.00, S = 32.06, Na = 22.99.
- 333 marks
Question 33
Moth-repellent and toilet-deodoriser blocks are made of 1,4-dichlorobenzene, which is manufactured by passing chlorine into chlorobenzene in the presence of anhydrous FeCl₃.
(a) Write the structures (as condensed formulas showing ring positions) and IUPAC names of the three dichlorobenzenes that could form, and state which are the main products.
(b) Chlorine slows down further substitution of the ring, yet it directs the incoming chlorine to the ortho and para positions. Explain both facts.
(c) The para isomer is a solid (m.p. 53 °C) while the ortho isomer is a liquid (m.p. −17 °C). How does this help the manufacturer obtain the pure para compound for the blocks?
- 342 marks
Question 34
A refinery laboratory identifies four hydrocarbons in a naphtha sample: W, C₉H₂₀; X, C₇H₁₆; Y, C₆H₁₂, which decolourises bromine in CCl₄; and Z, C₆H₁₂, which does not decolourise bromine in CCl₄ or cold dilute KMnO₄. Classify each hydrocarbon as open-chain saturated, open-chain unsaturated or alicyclic, and give one possible structure for Y and for Z.
- 352 marks
Question 35
A gas jar containing methane and chlorine is kept in a dark cupboard for a day, and no reaction occurs. When the jar is placed in diffused sunlight, the greenish-yellow colour fades and droplets of chloromethane and fumes of HCl appear. Explain these observations in terms of the free radical mechanism, state why it is the Cl–Cl bond, and not a C–H bond, that breaks first, and explain why the reaction stops almost at once when the jar is returned to the dark.
- 362 marks
Question 36
Cracked naphtha contains alkenes, which make petrol gummy on storage. A quality-control chemist dissolves 10.0 g of a cracked naphtha sample in CCl₄ and finds that it decolourises 4.80 g of bromine. Assuming that all the alkene present is pentene, C₅H₁₀, and that the alkanes do not react, write the equation for the reaction of pent-1-ene with bromine and calculate the percentage by mass of pentene in the sample. (Molar masses: Br₂ = 159.8 g mol⁻¹, C₅H₁₀ = 70.1 g mol⁻¹)
- 372 marks
Question 37
A domestic LPG cylinder holds butane (b.p. 273 K) and propane (b.p. 231 K) as a liquid under a modest pressure, whereas a CNG vehicle tank holds methane (b.p. 112 K) only as a highly compressed gas. Explain this difference, and explain why the gas company adds a strong-smelling compound to LPG.
- 382 marks
Question 38
Thin films of polyacetylene, made by the linear polymerisation of ethyne, are being tested as light, cheap electrodes for batteries.
(a) Write the repeating unit of polyacetylene and state how the hybridisation of the carbon atoms changes from ethyne to the polymer.
(b) Why can polyacetylene conduct electricity under special conditions, while polythene is an insulator?
- 392 marks
Question 39
A thermochemistry laboratory measures the enthalpy of hydrogenation of cyclohexene (one C=C) to cyclohexane as −120 kJ mol⁻¹, and that of benzene to cyclohexane as −208 kJ mol⁻¹.
(a) Calculate the enthalpy of hydrogenation expected for a hypothetical "cyclohexatriene" with three isolated C=C bonds, and from it the extra stability of benzene.
(b) What feature of benzene's structure accounts for this extra stability?
- 402 marks
Question 40
During a laboratory safety demonstration, small samples of hexane, C₆H₁₄, and benzene, C₆H₆, are burnt in open dishes. Hexane burns with an almost clean flame, while benzene gives a very smoky (sooty) flame.
(a) Calculate the mass percentage of carbon in each hydrocarbon (C = 12.01, H = 1.008) and use it to explain the difference.
(b) Why is the smoke from burning aromatic compounds a health hazard?
- 411 mark
Question 41
A flavour laboratory isolates two C₆H₁₂ alkenes, P and Q, which have different boiling points and different dipole moments. On ozonolysis (O₃, then Zn/H₂O), P and Q each give the same mixture of ethanal, CH₃CHO, and 2-methylpropanal, (CH₃)₂CHCHO. Which statement correctly identifies P and Q?
- 421 mark
Question 42
A plant chlorinates 2-methylpropane (isobutane, from LPG) in light to make monochloro derivatives. Under the plant conditions, one tertiary hydrogen atom is replaced 5.0 times as fast as one primary hydrogen atom. What percentage of the monochlorinated product is 2-chloro-2-methylpropane?
- 431 mark
Question 43
An agricultural chemist synthesises hepta-2,4-diene, CH₃–CH=CH–CH=CH–CH₂–CH₃, as a model for an insect pheromone and must test every geometrical isomer separately. How many geometrical isomers of hepta-2,4-diene are possible?
- 441 mark
Question 44
A chemist makes a C₁₀ branched alkane for a jet-fuel study by the two-step route below:

What is B?
- 451 mark
Question 45
A gaseous hydrocarbon leaking from a cracking unit is analysed. 10 mL of it is exploded with 80 mL of dioxygen (an excess). After cooling to room temperature (water condenses), the gas volume is 65 mL; after shaking with KOH solution, it falls to 35 mL. The hydrocarbon also decolourises bromine water. All volumes are at the same temperature and pressure. What is the hydrocarbon?
- 461 mark
Question 46
A chemist checking a sample of hexa-1,4-diene, CH₂=CH–CH₂–CH=CH–CH₃, from a polymer plant boils it with acidified potassium permanganate until the purple colour no longer fades, and collects the gas given off. Which set of products is expected?
- 471 mark
Question 47
A fuel additive is known to be one of the four C₇H₁₆ isomers shown below. Two facts are known: (1) its molecule contains no hydrogen atom on a carbon that is bonded to three other carbon atoms, and (2) on free radical monochlorination it gives exactly three structurally different monochloro derivatives.

Which isomer is the additive?
- 481 mark
Question 48
A computational chemistry student plots the energy of ethane as the rear carbon is rotated through a full turn:

How many of the following statements are correct?
(i) The staggered form is more stable than the eclipsed form by 12.5 kJ mol⁻¹, and at a dihedral angle of 120° the energy is again a maximum.
(ii) The energy at 90° is the same as the energy at 30°.
(iii) If the torsional strain of the eclipsed form is shared equally by its three pairs of eclipsed C–H bonds, each pair contributes about 4.2 kJ mol⁻¹.
(iv) At room temperature ethane molecules remain locked in one conformation, because the energy barrier of 12.5 kJ mol⁻¹ cannot be crossed.
(v) In one complete turn of 360°, the molecule passes through the eclipsed conformation only twice.
- 491 mark
Question 49
Polyisobutylene, used in chewing-gum base and in the inner lining of tyres, is an addition polymer whose chain looks like –CH₂–C(CH₃)₂–CH₂–C(CH₃)₂–CH₂–C(CH₃)₂–. A sample has an average molar mass of 1.12 × 10⁵ g mol⁻¹. What is the monomer, and about how many monomer units does an average chain contain?
- 501 mark
Question 50
A dye plant nitrates five aromatic feedstocks one at a time under identical conditions: methoxybenzene (PhOCH₃), methylbenzene (PhCH₃), benzene (PhH), chlorobenzene (PhCl) and nitrobenzene (PhNO₂). Which order of decreasing rate of nitration is correct?
- 511 mark
Question 51
A cumene plant (cumene, isopropylbenzene, is the raw material for phenol and acetone) reacts benzene with 2-chloropropane in the presence of anhydrous AlCl₃. The engineers find that di-isopropylbenzenes and tri-isopropylbenzenes contaminate the product. Which change will best reduce this contamination?
- 521 mark
Question 52
A dye-intermediate plant nitrates 1,3-dimethylbenzene (m-xylene) with a mixture of concentrated nitric and sulphuric acids so that one nitro group enters the ring. What is the main product?
- 531 mark
Question 53
A research student passes but-2-yne, CH₃–C≡C–CH₃, over a hot catalyst. Three molecules combine to form an aromatic ring. Which option correctly gives the product and the number of different monobromo compounds it can form by electrophilic replacement of a ring hydrogen with Br₂/FeBr₃?
- 541 mark
Question 54
A gas analyst passes 0.100 mol of a mixture of ethyne and propyne slowly over excess hot sodium, until every acidic hydrogen has been replaced by sodium. She collects 1.589 L of hydrogen gas at STP (molar volume 22.7 L mol⁻¹). What is the mole fraction of ethyne in the mixture?
- 551 mark
Question 55
A historian of chemistry tests Kekulé's original benzene structure, a ring of six carbons with fixed alternate single and double bonds, on the dibromotoluenes, C₆H₃Br₂(CH₃). How many isomeric dibromotoluenes does this fixed structure predict, and how many are actually known?
- 561 mark
Question 56
A bottle labelled only "C₄H₆" contains a gas P. With excess HBr, P gives 2,2-dibromobutane as the only product. P gives no ammonia and no salt when treated with sodamide. What is P?
- 571 mark
Question 57
A polymer laboratory receives a liquid hydrocarbon X, C₈H₈. The results of its tests are summarised below.

What is X?
- 581 mark
Question 58
A chemist needs to deprotonate a hydrocarbon with the mildest possible base. She compares the four hydrocarbons below.

Which hydrocarbon has the most acidic C–H hydrogen?
- 591 mark
Question 59
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): Of the two geometrical isomers of pent-2-ene, the cis isomer has both the higher boiling point and the higher melting point.
Reason (R): The cis molecules are more symmetrical than the trans molecules, so they pack more closely in the crystal lattice.
- 601 mark
Question 60
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): Electrolysis of an aqueous solution containing both sodium ethanoate and sodium propanoate gives a mixture of ethane, propane and butane at the anode.
Reason (R): At the anode, each carboxylate ion loses an electron and then carbon dioxide to give an alkyl free radical, and any two of the alkyl radicals present can combine with each other.
- 611 mark
Question 61
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): In a perfumery laboratory, benzaldehyde (C₆H₅CHO) undergoes electrophilic substitution, such as nitration, more slowly than benzene.
Reason (R): The –CHO group releases electrons into the benzene ring by resonance.
- 621 mark
Question 62
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): In the nitrating mixture used to make explosives such as TNT, nitric acid acts as an acid and sulphuric acid acts as a base.
Reason (R): The nitronium ion, NO₂⁺, is formed when a nitric acid molecule loses a proton.
- 635 marks
Question 63
A forensic laboratory receives a colourless liquid hydrocarbon X found at a fire scene. The following data are collected.
- Complete combustion of 0.70 g of X gives 2.20 g of CO₂ and 0.90 g of H₂O.
- The molar mass of X, found by mass spectrometry, is 140 g mol⁻¹.
- X decolourises bromine in CCl₄ and takes up one mole of H₂ per mole on catalytic hydrogenation.
- Ozonolysis of X (O₃, then Zn/H₂O) gives pentan-2-one, CH₃COCH₂CH₂CH₃, as the only product.
(Molar masses: C = 12.0, H = 1.0, CO₂ = 44.0, H₂O = 18.0 g mol⁻¹)
(a) Use data 1 and 2 to find the empirical and molecular formulae of X.
(b) Use data 3 and 4 to deduce the structure and IUPAC name of X.
(c) Write the structure and IUPAC name of the product formed when X reacts with bromine in CCl₄.
(d) X exists as two geometrical isomers. Explain why the ozonolysis data cannot tell which isomer the sample was.
- 645 marks
Question 64
In petrol, straight-chain n-heptane is a poor-quality component, and a refinery upgrades it in a reforming unit.
(a) n-Heptane is heated to 773 K at 10–20 atm over oxides of vanadium, molybdenum or chromium supported on alumina. Write the equation for its aromatisation to toluene (C₆H₅CH₃) and calculate the mass of dihydrogen released when 1.00 tonne (1.00 × 10⁶ g) of n-heptane is converted completely. (Molar masses: C₇H₁₆ = 100.2 g mol⁻¹, H₂ = 2.016 g mol⁻¹)
(b) Calculate the volume of this dihydrogen at STP (1 mol of gas occupies 22.7 L), and suggest one use for it inside the refinery.
(c) The enthalpies of combustion are −4817 kJ mol⁻¹ for n-heptane and −3910 kJ mol⁻¹ for toluene (C₇H₈ = 92.14 g mol⁻¹). Compare the heat released per gram of each fuel.
(d) Explain why aromatisation needs an n-alkane with at least six carbon atoms.
- 655 marks
Question 65
A small chemical unit has calcium carbide, water and inorganic reagents and catalysts, but no organic starting materials. It has to make the dye intermediate shown below.

(a) Write equations, with conditions, to obtain benzene from calcium carbide.
(b) Show how ethyne can be converted into chloroethane in two steps.
(c) Two orders are possible for the last two steps: Friedel–Crafts ethylation followed by nitration, or nitration followed by ethylation. Which order gives the target? Explain your choice and why the other order fails.
(d) Assuming every step goes to completion, calculate the minimum mass of CaC₂ needed to make 30.2 g of the target (molar masses in g mol⁻¹: CaC₂ = 64.10, target C₈H₉NO₂ = 151.16).
- 665 marks
Question 66
A physical-organic chemist studies the species shown below. Assume that (i), (ii) and (iii) are planar rings in which every carbon has a p orbital.

(a) Count the π electrons in (i) and (ii) and decide, with reasons, whether each is aromatic.
(b) Neutral cyclo-octatetraene is tub-shaped and not aromatic. When it takes up two electrons from potassium metal, it forms the dianion (iii), which is a flat regular octagon. Explain why the dianion is aromatic.
(c) Compound (iv) is not aromatic. It gives up a hydride ion (H⁻) from its CH₂ group far more readily than it gives up a proton (H⁺). Explain this using Hückel's rule.
- 674 marks
Question 67
A research student is given a vicinal dibromide X, C₇H₁₄Br₂, and carries out the following sequence:

(a) Deduce the structure and IUPAC name of the alkene Y.
(b) Deduce the structure and IUPAC name of X, and write the equation for its reaction with zinc.
(c) State, with a reason, whether Y shows geometrical isomerism.
(d) The student expects Y to give a single product with HBr (no peroxide) by Markovnikov's rule, but obtains two isomeric bromides in comparable amounts. Name the two products and explain the result.
- 683 marks
Question 68
An alkene A, C₆H₁₂, is studied in a teaching laboratory:
- With HBr in the absence of peroxide, A gives B, in which bromine is on a tertiary carbon.
- With HBr in the presence of benzoyl peroxide, A gives C, an isomer of B in which bromine is on a secondary carbon.
- Ozonolysis of A gives ethanal and butan-2-one.
(a) Deduce the structure and IUPAC name of A.
(b) Give the structures and IUPAC names of B and C, and explain why they differ.
(c) State whether A can exist as geometrical isomers.
- 693 marks
Question 69
A gas-testing laboratory checks a batch of CNG, taken as a mixture of methane and ethane only. A 10.0 L sample of the gas needs exactly 24.5 L of dioxygen for complete combustion. All volumes are measured at the same temperature and pressure.
(a) Write the combustion equations and calculate the volumes of methane and ethane in the sample.
(b) Calculate the volume of carbon dioxide produced.
(c) Calculate the volume of air (21 % dioxygen by volume) needed to burn the 10.0 L sample completely.
- 703 marks
Question 70
A fuel chemist needs pure 2-methylbutane (isopentane), (CH₃)₂CH–CH₂CH₃, to blend into winter petrol, and plans to make it by heating the sodium salt of a carboxylic acid with soda lime.
(a) Give the structures and IUPAC names of all four sodium carboxylates that would give 2-methylbutane on decarboxylation.
(b) A technician picks sodium 2-methylbutanoate by mistake. Which alkane is formed instead? Give the equation.
(c) A second technician uses sodium 2-methylpentanoate, CH₃CH₂CH₂CH(CH₃)COONa. Which alkane is formed? Is it an acceptable substitute for 2-methylbutane? Explain.
- 713 marks
Question 71
Two students start from benzene, using the same reagents in a different order.
Route I: Br₂/anhydrous FeBr₃ first, then the nitrating mixture (conc. HNO₃ + conc. H₂SO₄) used twice, the second time at a higher temperature, to introduce two nitro groups. This gives product X.
Route II: The nitrating mixture used twice first, to introduce two nitro groups, then Br₂/anhydrous FeBr₃ with heating. This gives product Y.
(a) Name X and Y.
(b) Explain the positions of the substituents in X and in Y.
(c) The bromination step of Route II is much slower than the bromination step of Route I. Explain.
- 723 marks
Question 72
In an explosives factory, methylbenzene (toluene) is nitrated in three stages to 2-methyl-1,3,5-trinitrobenzene (TNT, C₇H₅N₃O₆). Each stage needs stronger acid and a higher temperature than the one before.
(a) Explain why the three nitro groups occupy positions 2, 4 and 6 relative to the methyl group.
(b) Explain why each successive nitration needs harsher conditions.
(c) Calculate the maximum mass of TNT obtainable from 46.0 kg of toluene, and the mass of HNO₃ consumed (molar masses in g mol⁻¹: C = 12.01, H = 1.008, N = 14.01, O = 16.00).
- 733 marks
Question 73
From the 1930s to the 1960s a factory at Minamata, Japan, made ethanal (acetaldehyde) by passing ethyne into dilute sulphuric acid containing a mercury(II) sulphate catalyst. Mercury in its waste water later caused the disease now known as Minamata disease.
(a) Write the equation for the reaction, showing the unstable intermediate formed first.
(b) Why does ethyne give an aldehyde under these conditions, while every other alkyne gives a ketone?
(c) Calculate the mass of ethanal that can be made from 52.0 kg of ethyne (C = 12.01, H = 1.008, O = 16.00).
- 742 marks
Question 74
A sample of 1.64 g of an open-chain hydrocarbon Y (molar mass 82 g mol⁻¹), which contains only C=C multiple bonds, takes up 0.908 L of H₂, measured at STP, on complete hydrogenation over nickel. At STP, 1 mol of gas occupies 22.7 L. Find the number of C=C bonds in each molecule of Y, its molecular formula, and the class of hydrocarbon formed on hydrogenation.
- 752 marks
Question 75
A student repeats the chlorination of methane with iodine in place of chlorine, in bright light, and finds that practically no iodomethane forms. When iodic acid (HIO₃) is added to the mixture, iodomethane is obtained. Explain both observations with equations, and calculate the minimum amount of HIO₃ needed to remove the HI formed when 0.10 mol of CH₃I is produced.
- 762 marks
Question 76
In a refinery, the C₄ stream contains but-1-ene, but-2-ene and 2-methylpropene. When the stream is passed through cold sulphuric acid, 2-methylpropene is absorbed much faster than the other butenes, which is used to separate it. Write the equation for the reaction of 2-methylpropene with cold concentrated H₂SO₄, explain why 2-methylpropene reacts fastest, and explain why but-1-ene and but-2-ene, which are absorbed more slowly, both give the same alkyl hydrogen sulphate.
- 772 marks
Question 77
A margarine plant hydrogenates C=C bonds over nickel. Using the bond enthalpies C=C 681, C≡C 823, H–H 436, C–C 348 and C–H 414 kJ mol⁻¹, estimate the enthalpy changes for CH₂=CH₂(g) + H₂(g) → CH₃–CH₃(g) and for HC≡CH(g) + 2H₂(g) → CH₃–CH₃(g). Which hydrogenation releases more heat per mole of H₂ added?
- 782 marks
Question 78
A pharmaceutical stockroom has two unlabelled intermediates whose structures were found by spectroscopy, as shown below.

Write the IUPAC name of each compound, showing how you chose the numbering.
- 792 marks
Question 79
In a dye works, nitrobenzene is nitrated a second time. Predict the main product and, using the resonance structures of the arenium ions formed when NO₂⁺ attacks the para position and the meta position, explain your prediction. (Number the carbon bearing the NO₂ group as C1.)
- 802 marks
Question 80
A lab technician finds an old solvent bottle whose label reads only "C₇H₈, M = 92 g mol⁻¹". The liquid burns with a sooty flame and does not decolourise bromine in CCl₄.
(a) Identify the solvent, and explain why the bromine test rules out hepta-1,6-diyne, HC≡C–CH₂CH₂CH₂–C≡CH, which has the same formula.
(b) How many moles of H₂ does 1 mol of the solvent take up with nickel at high temperature and pressure? Name the product.
