Confirming your payment

Skip to content

Opening your dashboard

Class 11 Physics Chapter 1 Units And Measurments: Competency-Based Questions (CBQ)

80 questions on Chapter 1, each worked through on its own page with the AI tutor. Class 11 Physics, CBSE 2026-27.

80 questions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    A student records the mass of a small washer as 0.004060 kg0.004060\ \text{kg}. Her partners rewrite the same reading as 4.060 g4.060\ \text{g} and as 4060 mg4060\ \text{mg}. Consider the following statements.

    I. 0.004060 kg0.004060\ \text{kg} and 4.060 g4.060\ \text{g} both have four significant figures.

    II. Written as 4060 mg4060\ \text{mg}, the number of significant figures is ambiguous: it could be read as three or four.

    III. Writing the reading as 4.060×103 mg4.060 \times 10^{3}\ \text{mg} shows four significant figures without any ambiguity.

    IV. The zeros before the 4 in 0.004060 kg0.004060\ \text{kg} are significant because they fix the position of the decimal point.

    Which of the statements are correct?

    MCQMedium
    1 mark
  2. 2

    Question 2

    A thin strip of card is measured as 12.5 cm12.5\ \text{cm} long and 0.42 cm0.42\ \text{cm} wide. Using the rules for significant figures and rounding, the perimeter and the area of the strip should be reported as

    MCQMedium
    1 mark
  3. 3

    Question 3

    Three readings, 0.072550.07255, 1.03501.0350 and 4.26494.2649, are each to be rounded to three significant figures using the rounding rules followed in NCERT. The rounded values, in the same order, are

    MCQMedium
    1 mark
  4. 4

    Question 4

    The Avogadro number is NA=6.02×1023 mol−1N_A = 6.02 \times 10^{23}\ \text{mol}^{-1} and the charge on an electron has magnitude e=1.6×10−19 Ce = 1.6 \times 10^{-19}\ \text{C}. Their product, NAeN_A e, is the charge carried by one mole of electrons. Consider the following statements.

    I. The order of magnitude of NAN_A is 102310^{23}.

    II. The order of magnitude of ee is 10−1910^{-19}.

    III. The order of magnitude of NAeN_A e is 10510^{5}.

    IV. The order of magnitude of NAeN_A e is 10410^{4}, because the power of ten in its value is 4.

    Which of the statements are correct?

    MCQMedium
    1 mark
  5. 5

    Question 5

    The viscous force between two layers of a liquid is F=ηAdvdxF = \eta A \dfrac{dv}{dx}, where AA is the area of the layers and dvdx\dfrac{dv}{dx} is the velocity gradient (change in velocity per unit distance between the layers). The dimensional formula of the coefficient of viscosity η\eta is

    MCQMedium
    1 mark
  6. 6

    Question 6

    The velocity vv of a particle varies with time tt as

    v=at+bt+cv = a t + \frac{b}{t + c}

    where aa, bb and cc are constants. The dimensions of aa, bb and cc respectively are

    MCQMedium
    1 mark
  7. 7

    Question 7

    In the relations below, FF is force, mm mass, vv speed, rr radius, EE energy and PP power. Which relation is dimensionally incorrect?

    MCQMedium
    1 mark
  8. 8

    Question 8

    In a new system of units, the unit of mass is 100 g100\ \text{g}, the unit of length is 10 cm10\ \text{cm} and the unit of time is 0.1 s0.1\ \text{s}. How many new units of energy make up 1 J1\ \text{J}?

    MCQMedium
    1 mark
  9. 9

    Question 9

    A stone falls from rest through a height hh in time tt and reaches speed vv; gg is the acceleration due to gravity. Which of the following combinations is dimensionless?

    MCQMedium
    1 mark
  10. 10

    Question 10

    Three lengths are measured as 2.5 m2.5\ \text{m}, 34 cm34\ \text{cm} and 7.2 mm7.2\ \text{mm}. Their sum, reported in metres with the correct number of significant figures, is

    MCQMedium
    1 mark
  11. 11

    Question 11

    The length of a metal bar is measured as 25.34 cm25.34\ \text{cm} at a higher temperature and 25.21 cm25.21\ \text{cm} at a lower temperature. Consider the following statements about the change in length.

    I. The change in length is 0.13 cm0.13\ \text{cm}.

    II. The change in length has four significant figures, the same as the data.

    III. The change in length has only two significant figures, so the subtraction has reduced the number of significant figures.

    IV. The change should be written as 0.130 cm0.130\ \text{cm} to keep the precision of the original readings.

    Which of the statements are correct?

    MCQMedium
    1 mark
  12. 12

    Question 12

    A student adds two measured lengths and multiplies the sum by a measured factor:

    x=(2.5+0.372)×1.20x = (2.5 + 0.372) \times 1.20

    Following the NCERT rules for significant figures, including the advice on intermediate results, xx should be reported as

    MCQMedium
    1 mark
  13. 13

    Question 13

    A rectangular tile has length l=25.0±0.1 cml = 25.0 \pm 0.1\ \text{cm} and breadth b=8.0±0.1 cmb = 8.0 \pm 0.1\ \text{cm}. Consider the following statements about its area.

    I. The breadth contributes about three times as much relative uncertainty as the length.

    II. The area is 200±3 cm2200 \pm 3\ \text{cm}^2.

    III. Halving the uncertainty in ll would reduce the uncertainty in the area more than halving the uncertainty in bb.

    IV. Adding the absolute uncertainties of ll and bb gives the uncertainty in the area as ±0.2 cm2\pm 0.2\ \text{cm}^2.

    Which of the statements are correct?

    MCQMedium
    1 mark
  14. 14

    Question 14

    The minute hand of a wall clock is 12 cm12\ \text{cm} long. The figure shows the hand at 10:00 and at 10:05.

    Class 11 Physics Units And Measurments

    Using θ=s/r\theta = s/r, the distance moved by the tip of the minute hand in these 5 minutes, reported with the correct number of significant figures, is

    MCQMedium
    1 mark
  15. 15

    Question 15

    Consider the following statements.

    I. Pressure has the dimensional formula [ML−1T−2][\text{M}\text{L}^{-1}\text{T}^{-2}].

    II. Energy per unit volume has the dimensional formula [ML−1T−2][\text{M}\text{L}^{-1}\text{T}^{-2}].

    III. Stress (force per unit area) has the dimensional formula [ML−1T−2][\text{M}\text{L}^{-1}\text{T}^{-2}].

    IV. Momentum per unit volume has the dimensional formula [ML−1T−2][\text{M}\text{L}^{-1}\text{T}^{-2}].

    Which of the statements are correct?

    MCQMedium
    1 mark
  16. 16

    Question 16

    The energy EE of a system depends on a distance xx (in metres) as

    E=E0 e−αx2E = E_0\, e^{-\alpha x^{2}}

    where E0E_0 is a constant energy. The dimensions and SI unit of the constant α\alpha are

    MCQMedium
    1 mark
  17. 17

    Question 17

    A body of mass mm moves with constant speed vv in a circle of radius rr, as shown. Assume that the force FF needed to keep it on the circle is F=k mavbrcF = k\, m^{a} v^{b} r^{c}, where kk is a dimensionless constant.

    Class 11 Physics Units And Measurments

    The values of aa, bb and cc are

    MCQMedium
    1 mark
  18. 18

    Question 18

    A student lists what the method of dimensions can and cannot do.

    I. It cannot give the value of a dimensionless constant such as the 12\frac{1}{2} in K=12mv2K = \frac{1}{2} m v^{2}.

    II. It cannot derive a relation that is a sum of terms, such as s=ut+12at2s = ut + \frac{1}{2}at^{2}.

    III. It cannot tell work from torque, because both have the dimensions [ML2T−2][\text{M}\text{L}^{2}\text{T}^{-2}].

    IV. It cannot tell whether a given equation is dimensionally consistent.

    Which of the statements correctly describe limitations of the method?

    MCQMedium
    1 mark
  19. 19

    Question 19

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The equation v2=u2+2asv^{2} = u^{2} + 2as is dimensionally inconsistent.

    Reason (R): Acceleration has the dimensions [LT−1][\text{L}\text{T}^{-1}], so the term 2as2as has the dimensions [L2T−1][\text{L}^{2}\text{T}^{-1}].

    MCQMedium
    1 mark
  20. 20

    Question 20

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Strain (change in length divided by original length) has no unit.

    Reason (R): Stress (force per unit area) has the same dimensions as strain.

    MCQMedium
    1 mark
  21. 21

    Question 21

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The lengths 4.700 m4.700\ \text{m} and 470.0 cm470.0\ \text{cm} have the same number of significant figures.

    Reason (R): In 470.0 cm470.0\ \text{cm}, the zero after the decimal point is not significant.

    MCQMedium
    1 mark
  22. 22

    Question 22

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The equation v=u+at2v = u + at^{2} is dimensionally consistent.

    Reason (R): An equation containing a pure-number constant can never be checked by the method of dimensions.

    MCQMedium
    1 mark
  23. 23

    Question 23

    In a laboratory, a student measures a solid brass cylinder. Its diameter is d=2.56 cmd = 2.56\ \text{cm}, its length is l=10.20 cml = 10.20\ \text{cm} and its mass is m=408.5 gm = 408.5\ \text{g}.

    Class 11 Physics Units And Measurments

    (a) Find the radius of the cylinder and its volume V=πr2lV = \pi r^{2} l, each with the correct number of significant figures.

    (b) Find the density of brass in g cm−3\text{g cm}^{-3} and then in kg m−3\text{kg m}^{-3}.

    (c) Which of the three readings limits the number of significant figures in the density? Explain.

    (d) If the diameter had been recorded as 2.6 cm2.6\ \text{cm}, what density would be reported, and why does it differ from your answer to (b)?

    Medium
    5 marks
  24. 24

    Question 24

    An early attempt to find the speed of sound vv in a gas assumed that vv depends only on the pressure PP of the gas and its density ρ\rho, in the form v=kPaρbv = k P^{a} \rho^{b}, where kk is a dimensionless constant.

    (a) Use the method of dimensions to find aa and bb, and write the resulting relation.

    (b) For air, P=1.0×105 PaP = 1.0 \times 10^{5}\ \text{Pa} and ρ=1.3 kg m−3\rho = 1.3\ \text{kg m}^{-3}. Calculate P/ρ\sqrt{P/\rho} with the correct number of significant figures.

    (c) The measured speed of sound in air is 331 m s−1331\ \text{m s}^{-1}. Find the value of kk this implies.

    (d) Why could the method of dimensions not give the value of kk in part (a)?

    Medium
    5 marks
  25. 25

    Question 25

    Some units outside SI are still in everyday use (NCERT Table 1.2). Use 1 tonne=103 kg1\ \text{tonne} = 10^{3}\ \text{kg}, 1 quintal=100 kg1\ \text{quintal} = 100\ \text{kg}, 1 litre=10−3 m31\ \text{litre} = 10^{-3}\ \text{m}^3 and 1∘=π180 rad1^\circ = \dfrac{\pi}{180}\ \text{rad}.

    (a) A truck carries 12.512.5 tonne of wheat. Express this load in kilograms and in quintals.

    (b) A car's fuel tank holds 45.045.0 litre. Express this volume in m3\text{m}^3.

    (c) A ramp is inclined at 22.5∘22.5^\circ to the ground. Express this angle in radians.

    (d) Give the correct number of significant figures in each answer, and explain why units like the tonne, the litre and the degree are still retained.

    Medium
    5 marks
  26. 26

    Question 26

    A student is asked for the speed vv that a body needs to escape from the surface of a planet of mass MM and radius RR. He writes two possible formulae:

    v=2GMRandv=2GMRv = \sqrt{\frac{2GM}{R}} \qquad \text{and} \qquad v = \sqrt{2GMR}

    where GG is the gravitational constant, with [G]=[M−1L3T−2][G] = [\text{M}^{-1}\text{L}^{3}\text{T}^{-2}].

    Class 11 Physics Units And Measurments

    (a) Find the dimensions of GMR\dfrac{GM}{R} and of GMRGMR.

    (b) Which of the two formulae can be correct? Which one is certainly wrong? Give reasons.

    (c) Can the method of dimensions confirm the factor 2 in the possible formula?

    (d) Another student writes v=GM2Rv = \sqrt{\dfrac{GM}{2R}}. Would a dimensional check catch this mistake? Explain.

    Medium
    5 marks
  27. 27

    Question 27

    To find the density of a liquid, a student uses two balances. An empty beaker has a mass of 52.36 g52.36\ \text{g} on a laboratory balance. After 25.0 cm325.0\ \text{cm}^3 of the liquid is poured in, the beaker and liquid together are weighed on a less precise balance as 77.8 g77.8\ \text{g}.

    (a) Find the mass of the liquid, with the correct number of significant figures.

    (b) Find the density of the liquid, with the correct number of significant figures.

    (c) State which rule for significant figures applies at each step, and which reading limits the precision of the density.

    Medium
    4 marks
  28. 28

    Question 28

    The drag force on a body moving through a fluid at speed vv is modelled as F=av+bv2F = av + bv^{2}, where aa and bb are constants.

    (a) Find the dimensions of aa and bb.

    (b) Write the SI units of aa and bb in base units.

    (c) Find the dimensions of a/ba/b and say what kind of quantity it is.

    Medium
    3 marks
  29. 29

    Question 29

    Assume that the rest energy EE of a particle depends only on its mass mm and the speed of light cc, as E=k macbE = k\, m^{a} c^{b}, where kk is a dimensionless constant.

    (a) Use the method of dimensions to find aa and bb.

    (b) If EE were assumed to depend on mm, cc and the particle's speed vv, why would the method fail to give a unique answer?

    Medium
    3 marks
  30. 30

    Question 30

    A student standing on level ground looks at a tower of height 25.0 m25.0\ \text{m} that is 1.50 km1.50\ \text{km} away, as shown.

    Class 11 Physics Units And Measurments

    (a) Find the angle θ\theta that the tower subtends at the student's eye, in radians.

    (b) Express this angle in degrees.

    (c) In part (a) the height of the tower was treated as an arc of a circle centred on the student. Why is this a good approximation here?

    Medium
    3 marks
  31. 31

    Question 31

    A student times a trolley running down a ramp four times and gets 2.35 s2.35\ \text{s}, 2.37 s2.37\ \text{s}, 2.36 s2.36\ \text{s} and 2.38 s2.38\ \text{s}.

    (a) Find the mean time and round it correctly.

    (b) Explain why the mean is reported to three significant figures, even though it is found by dividing by 4.

    Medium
    3 marks
  32. 32

    Question 32

    A block of mass mm is attached to a spring of spring constant kk (SI unit N m−1\text{N m}^{-1}) and pulled a distance xx from the natural length, as shown.

    Class 11 Physics Units And Measurments

    (a) Find the dimensions of kk and show that T=2πm/kT = 2\pi\sqrt{m/k} is dimensionally consistent for the period TT of oscillation.

    (b) A student cannot remember whether the energy stored in the spring is U=12kxU = \frac{1}{2}kx or U=12kx2U = \frac{1}{2}kx^{2}. Use dimensions to decide.

    (c) Find the dimensions of k/mk/m and say what kind of quantity k/m\sqrt{k/m} is.

    Medium
    3 marks
  33. 33

    Question 33

    The radius of a circular coin is measured as 2.1 cm2.1\ \text{cm}.

    (a) Find its circumference 2πr2\pi r with the correct number of significant figures.

    (b) Find its area πr2\pi r^{2} with the correct number of significant figures.

    (c) The radius is re-measured as 2.10 cm2.10\ \text{cm}. Report the area now and explain why it differs from your answer to (b).

    Medium
    3 marks
  34. 34

    Question 34

    Express (a) W m−2\text{W m}^{-2}, the unit of intensity, and (b) J kg−1\text{J kg}^{-1} in terms of SI base units, showing each step. Which of the two has the same dimensions as the square of a speed?

    Medium
    2 marks
  35. 35

    Question 35

    Check whether the relation

    v=u+2gh−Ftm+ωrv = u + \sqrt{2gh} - \frac{Ft}{m} + \omega r

    is dimensionally consistent. Here vv and uu are speeds, gg is the acceleration due to gravity, hh a height, FF a force, tt a time, mm a mass, ω\omega an angular speed and rr a radius.

    Medium
    2 marks
  36. 36

    Question 36

    One sample contains 1 mol1\ \text{mol} of oxygen molecules (O2\text{O}_2) and another contains 1 mol1\ \text{mol} of oxygen atoms (O). The molar masses are 32 g mol−132\ \text{g mol}^{-1} for O2\text{O}_2 and 16 g mol−116\ \text{g mol}^{-1} for O.

    (a) Compare the number of entities and the mass in the two samples, and find how many oxygen atoms the first sample contains.

    (b) Use your answer to explain why the elementary entities must be specified whenever the mole is used.

    Medium
    2 marks
  37. 37

    Question 37

    Evaluate each expression if it is allowed, giving the result with its unit and the correct number of significant figures or decimal places. If it is not allowed, say why.

    (a) 5.0 m+3.0 s5.0\ \text{m} + 3.0\ \text{s}

    (b) 5.0 m+(2.0 m s−1)(3.0 s)5.0\ \text{m} + (2.0\ \text{m s}^{-1})(3.0\ \text{s})

    (c) 5.0 m3.0 s−2.0 m s−1\dfrac{5.0\ \text{m}}{3.0\ \text{s}} - 2.0\ \text{m s}^{-1}

    Medium
    2 marks
  38. 38

    Question 38

    Two rods have lengths 4.9 m4.9\ \text{m} and 5.1 m5.1\ \text{m}. Find the order of magnitude of each length, and comment on why two nearly equal lengths are given different orders of magnitude.

    Medium
    2 marks
  39. 39

    Question 39

    Gravitational field strength is the force per unit mass on a body, measured in N kg−1\text{N kg}^{-1}. Show that this unit is the same as m s−2\text{m s}^{-2}, and give the dimensional formula of gravitational field strength.

    Medium
    2 marks
  40. 40

    Question 40

    A spring has spring constant 2.50×102 N m−12.50 \times 10^{2}\ \text{N m}^{-1}. Find its dimensional formula from the unit, then use it to express it in dyne cm−1\text{dyne cm}^{-1}, and explain why the change from metres to centimetres has no effect on the conversion.

    Medium
    2 marks
  41. 41

    Question 41

    A group of engineers designs a system of units in which velocity VV, force FF and time TT are taken as the fundamental quantities, and mass becomes a derived quantity. Which of the following is the dimensional formula of mass in this system?

    MCQHard
    1 mark
  42. 42

    Question 42

    In theories that combine quantum mechanics and gravitation, a fundamental length ll is built only from Planck's constant hh, the gravitational constant GG and the speed of light cc, as l=k haGbcdl = k\,h^{a} G^{b} c^{d} with kk a dimensionless constant. Planck's constant is defined by E=hνE = h\nu, where EE is the energy of a photon and ν\nu its frequency, and [G]=[M−1L3T−2][G] = [\mathrm{M^{-1}L^{3}T^{-2}}]. The exponents are

    MCQHard
    1 mark
  43. 43

    Question 43

    A small ball dropped into a tall column of oil speeds up and approaches a steady speed. Its velocity vv at time tt is modelled as

    v=ab(1−e−bt)v = \frac{a}{b}\left(1 - e^{-bt}\right)

    where aa and bb are constants. Which option gives the correct dimensional formulae of aa and bb?

    MCQHard
    1 mark
  44. 44

    Question 44

    In a model of a particle dragged along a rough, curved track, the force on it is written as

    F=ax+b t2F = a\sqrt{x} + b\,t^{2}

    where FF is force, xx is the distance travelled and tt is time. The dimensional formula of ab\dfrac{a}{b} is

    MCQHard
    1 mark
  45. 45

    Question 45

    A pressure PP that builds up in a sealed chamber is modelled as

    P=a−t2b xP = \frac{a - t^{2}}{b\,x}

    where tt is time and xx is a distance. Which option gives the correct dimensional formulae of bb and of ab\dfrac{a}{b}?

    MCQHard
    1 mark
  46. 46

    Question 46

    A laboratory adopts a system of units in which the unit of force is 4 N4\ \text{N}, the unit of length is 2 m2\ \text{m} and the unit of time is 0.5 s0.5\ \text{s}. What is the unit of power in this system, expressed in SI units?

    MCQHard
    1 mark
  47. 47

    Question 47

    In a calculation, a student needs 17.71\dfrac{1}{7.71} as an intermediate value and later takes the reciprocal of that intermediate value to recover the original quantity. The final answer is always reported to three significant figures.

    In route P, she rounds the intermediate value to three significant figures before taking the reciprocal. In route Q, she keeps one extra digit in the intermediate value. What final answers do routes P and Q give?

    MCQHard
    1 mark
  48. 48

    Question 48

    A small steel sphere of radius rr moves slowly with speed vv through a liquid of viscosity η\eta, where η\eta is defined by F=ηA dvdxF = \eta A\,\dfrac{dv}{dx} (FF tangential force, AA area, dv/dxdv/dx velocity gradient). Assume the drag force is F=k ηarbvcF = k\,\eta^{a} r^{b} v^{c}, with kk a dimensionless constant.

    Class 11 Physics Units And Measurments

    The values of aa, bb and cc are

    MCQHard
    1 mark
  49. 49

    Question 49

    A small liquid drop, disturbed slightly, oscillates about its spherical shape. Its frequency ν\nu is assumed to depend on the surface tension SS of the liquid, its density ρ\rho and the radius rr of the drop, as ν=k Saρbrc\nu = k\,S^{a}\rho^{b}r^{c}, where kk is a dimensionless constant and [S]=[MT−2][S] = [\mathrm{MT^{-2}}].

    Class 11 Physics Units And Measurments

    The values of aa, bb and cc are

    MCQHard
    1 mark
  50. 50

    Question 50

    For a wave travelling along a string, yy is the displacement, xx the position, λ\lambda the wavelength and aa the amplitude (all lengths), cc the wave speed and tt time. Which of the following expressions is dimensionally WRONG?

    MCQHard
    1 mark
  51. 51

    Question 51

    A small wooden block is measured with a ruler as 4.2±0.1 cm4.2 \pm 0.1\ \text{cm} long, 2.2±0.1 cm2.2 \pm 0.1\ \text{cm} wide and 1.5±0.1 cm1.5 \pm 0.1\ \text{cm} high. Using the rule that the relative uncertainties of the factors add for a product, and reporting the result to the correct number of significant figures, the volume of the block should be written as

    MCQHard
    1 mark
  52. 52

    Question 52

    In the diffusion of a gas, the number of molecules JJ crossing unit area per unit time is given by

    J=−D n2−n1x2−x1J = -D\,\frac{n_{2} - n_{1}}{x_{2} - x_{1}}

    where n1n_{1} and n2n_{2} are the numbers of molecules per unit volume at positions x1x_{1} and x2x_{2}. The dimensional formula of the diffusion coefficient DD is

    MCQHard
    1 mark
  53. 53

    Question 53

    The power PP radiated by a hot black surface of area AA at thermodynamic temperature TT is given by

    P=σAT4P = \sigma A T^{4}

    where σ\sigma is a constant. The dimensional formula of σ\sigma is

    MCQHard
    1 mark
  54. 54

    Question 54

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): In the expression E=E0 e−at2sin⁡(bx)E = E_{0}\,e^{-at^{2}}\sin(bx), where tt is time and xx is distance, the quantity a/b2a/b^{2} has the dimensions of (velocity)2^{2}.

    Reason (R): The arguments of exponential and trigonometric functions must be dimensionless.

    MCQHard
    1 mark
  55. 55

    Question 55

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): A length of 350 cm350\ \text{cm} known to three significant figures should be written as 3.50×102 cm3.50 \times 10^{2}\ \text{cm}.

    Reason (R): Zeros to the left of the first non-zero digit in a number less than 1 are not significant.

    MCQHard
    1 mark
  56. 56

    Question 56

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): In the equation y=asin⁡(ωt)+b tcos⁡(ωt)y = a\sin(\omega t) + b\,t\cos(\omega t), where yy and aa are lengths, tt is time and ω\omega is an angular frequency, the constant bb has the same dimensions as aωa\omega.

    Reason (R): At t=0t = 0 both terms on the right-hand side of this equation are zero, so y=0y = 0 at t=0t = 0.

    MCQHard
    1 mark
  57. 57

    Question 57

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The result of (2.50×4.0)÷0.125(2.50 \times 4.0) \div 0.125, where all three are measured values, should be reported as 8.0×1018.0 \times 10^{1}.

    Reason (R): In multiplication and division, the result keeps as many significant figures as the most precise factor.

    MCQHard
    1 mark
  58. 58

    Question 58

    When a very large amount of energy EE is released suddenly at a point in air, a roughly spherical fireball forms and grows. Its radius RR at time tt after the release is assumed to depend only on EE, the density ρ\rho of the surrounding air and tt, as R=k EaρbtcR = k\,E^{a}\rho^{b}t^{c}, with kk a dimensionless constant. The relation obtained is

    MCQHard
    1 mark
  59. 59

    Question 59

    A mining company uses a system of units in which the unit of length is 1 km1\ \text{km}, the unit of time is 1 min1\ \text{min} and the unit of mass is 1 tonne1\ \text{tonne} (103 kg10^{3}\ \text{kg}). A pump is rated at 1.0 kW1.0\ \text{kW}. Expressed in the new system to the correct number of significant figures, its power is

    MCQHard
    1 mark
  60. 60

    Question 60

    A student remembers Poiseuille's formula for the volume QQ of liquid flowing per second through a narrow tube, but not the power of the radius rr. In the formula, PP is the pressure difference across the tube, ll its length and η\eta the viscosity of the liquid, where η\eta is defined by F=ηA dvdxF = \eta A\,\dfrac{dv}{dx} (FF tangential force, AA area, dv/dxdv/dx velocity gradient). Which form is dimensionally correct?

    MCQHard
    1 mark
  61. 61

    Question 61

    Three lengths are recorded in a report as P: 0.0500±0.0001 m0.0500 \pm 0.0001\ \text{m}, Q: 50.0±0.1 m50.0 \pm 0.1\ \text{m} and R: 8.00±0.01 m8.00 \pm 0.01\ \text{m}. Consider the statements:

    I. All three readings have three significant figures.

    II. P and Q have the same relative uncertainty.

    III. R is the most precise reading in relative terms, even though its uncertainty in metres is larger than that of P.

    IV. Q is less precise than P in relative terms, because its uncertainty in metres is larger.

    Which of the statements are correct?

    MCQHard
    1 mark
  62. 62

    Question 62

    A motor delivers a varying power PP to a cart of mass mm. An engineer defines the quantity

    X=∫0tP dtm vX = \frac{\displaystyle\int_{0}^{t} P\,dt}{m\,v}

    where vv is a velocity. (An integral ∫P dt\int P\,dt is a sum of products P dtP\,dt, so it has the dimensions of P×P \times time.) The dimensions of XX are those of

    MCQHard
    1 mark
  63. 63

    Question 63

    A science-fiction writer invents an "Earth system" of units for a colony. In it, the unit of length is the radius of the Earth, RE=6.4×106 mR_{E} = 6.4 \times 10^{6}\ \text{m}; the unit of time is one day, 86 400 s86\,400\ \text{s} (an exact, defined value); and the unit of mass is the mass of the Earth, ME=6.0×1024 kgM_{E} = 6.0 \times 10^{24}\ \text{kg}.

    Class 11 Physics Units And Measurments

    (a) Express the acceleration due to gravity, g=9.8 m s−2g = 9.8\ \text{m s}^{-2}, in the Earth system.

    (b) Express the gravitational constant, G=6.67×10−11 N m2 kg−2G = 6.67 \times 10^{-11}\ \text{N m}^{2}\ \text{kg}^{-2}, whose dimensions are [M−1L3T−2][\mathrm{M^{-1}L^{3}T^{-2}}], in the Earth system.

    (c) The two quantities are related by g=GMERE2g = \dfrac{G M_{E}}{R_{E}^{2}}. Explain why the numbers in (a) and (b) agree, and why their unrounded values differ slightly.

    (d) State, with reason, how many significant figures each answer should carry.

    Hard
    5 marks
  64. 64

    Question 64

    A planet moves in a circular orbit of radius rr around a star of mass MM. An astronomer guesses that the period TT depends only on rr, MM and the gravitational constant GG, where [G]=[M−1L3T−2][G] = [\mathrm{M^{-1}L^{3}T^{-2}}].

    Class 11 Physics Units And Measurments

    (a) Taking T=k raMbGcT = k\,r^{a}M^{b}G^{c}, where kk is a dimensionless constant, find aa, bb and cc.

    (b) Theory gives k=2πk = 2\pi. Calculate TT for r=1.5×1011 mr = 1.5 \times 10^{11}\ \text{m} and M=2.0×1030 kgM = 2.0 \times 10^{30}\ \text{kg} (G=6.67×10−11 N m2 kg−2G = 6.67 \times 10^{-11}\ \text{N m}^{2}\ \text{kg}^{-2}), giving the answer to the correct number of significant figures.

    (c) Express the result in years (1 y=3.156×107 s1\ \text{y} = 3.156 \times 10^{7}\ \text{s}).

    (d) Suppose the mass mm of the planet is also allowed in the guess, T=k raMbmeGcT = k\,r^{a}M^{b}m^{e}G^{c}. Explain why dimensional analysis can no longer tell how TT depends on MM and on mm separately.

    Hard
    5 marks
  65. 65

    Question 65

    For one mole of a real gas, the van der Waals equation is

    (P+aVm2)(Vm−b)=RT\left(P + \frac{a}{V_{m}^{2}}\right)(V_{m} - b) = RT

    where PP is pressure, VmV_{m} is the molar volume (volume per mole, unit m3 mol−1\text{m}^{3}\ \text{mol}^{-1}), TT is the thermodynamic temperature and RR is the gas constant.

    (a) Find the dimensional formulae of aa and bb, keeping the amount of substance [mol][\mathrm{mol}] as a base dimension.

    (b) Write the SI units of aa and bb in base units.

    (c) Show that abRT\dfrac{a}{bRT} is dimensionless.

    (d) Find the dimensional formula of the product abab.

    (e) Which constant corrects the pressure and which corrects the volume? Give the reason from the form of the equation.

    Hard
    5 marks
  66. 66

    Question 66

    In a school laboratory, a simple pendulum of effective length l=98.5 cml = 98.5\ \text{cm} is set swinging with a small amplitude. A student times 20 complete oscillations and gets 39.8 s39.8\ \text{s}.

    Class 11 Physics Units And Measurments

    (a) Find the period TT. State how many significant figures it has, and how it should be carried into the next step.

    (b) Using g=4π2lT2g = \dfrac{4\pi^{2}l}{T^{2}}, calculate gg in m s−2\text{m s}^{-2}, stating the significant-figure rule used at each step.

    (c) Taking each reading as uncertain by one unit in its last digit, which measured reading limits the precision of gg? How would timing 50 oscillations instead of 20 change the precision of TT?

    (d) A second student keeps ll in centimetres and reports g=982 cm s−2g = 982\ \text{cm s}^{-2}. Is her answer less precise than yours? Explain.

    Hard
    5 marks
  67. 67

    Question 67

    When water flows through a pipe of radius rr, the flow stays smooth only up to a critical speed vcv_{c}, given by

    vc=R ηρ rv_{c} = \frac{R\,\eta}{\rho\,r}

    where η\eta is the viscosity of the liquid, defined by F=ηA dvdxF = \eta A\,\dfrac{dv}{dx} (FF tangential force, AA area, dv/dxdv/dx velocity gradient), ρ\rho its density, and RR is a number called the Reynolds number.

    (a) Show that RR is dimensionless.

    (b) A student writes the formula as vc=R ηρ r2v_{c} = \dfrac{R\,\eta}{\rho\,r^{2}}. Use dimensions to show this form cannot be right.

    (c) Another textbook writes vc=R′ηρ Dv_{c} = \dfrac{R'\eta}{\rho\,D}, where DD is the diameter of the pipe. Is this form dimensionally acceptable? How are RR and R′R' related, and why can dimensional analysis not find either of them?

    Hard
    4 marks
  68. 68

    Question 68

    Waves on the surface of the deep ocean travel with a speed vv that is found to depend on the wavelength λ\lambda and the acceleration due to gravity gg.

    Class 11 Physics Units And Measurments

    (a) Assuming v=k gaλbv = k\,g^{a}\lambda^{b}, with kk dimensionless, find aa and bb.

    (b) A student argues that the density ρ\rho of sea water must also appear, as ρc\rho^{c}. Use dimensions to show that c=0c = 0.

    (c) Using your result, by what factor does the speed change for a wave whose wavelength is 4 times larger?

    Hard
    3 marks
  69. 69

    Question 69

    (a) A student writes the displacement of a uniformly accelerated body as s=ut+at2s = ut + at^{2}. Check it for dimensional consistency.

    (b) Is the student's formula correct? What does your answer to (a) show about the dimensional test?

    (c) Now try to derive a formula for ss as a single product s=k uxaytzs = k\,u^{x}a^{y}t^{z}. Show that the powers are not fixed uniquely, and find the family of relations that the method allows.

    Hard
    3 marks
  70. 70

    Question 70

    The energy of a photon is E=hνE = h\nu, where ν\nu is its frequency and hh is Planck's constant.

    (a) The SI unit of hh is J s. Express it in SI base units and write the dimensional formula of hh.

    (b) Show that hmv\dfrac{h}{mv}, where mm is a mass and vv a speed, has the dimension of length.

    (c) Evaluate hmv\dfrac{h}{mv} for an electron with m=9.1×10−31 kgm = 9.1 \times 10^{-31}\ \text{kg} moving at v=1.0×106 m s−1v = 1.0 \times 10^{6}\ \text{m s}^{-1}, taking h=6.63×10−34 J sh = 6.63 \times 10^{-34}\ \text{J s}. Give the result to the correct significant figures and state its order of magnitude.

    Hard
    3 marks
  71. 71

    Question 71

    In a calorimetry experiment, m=250.0 gm = 250.0\ \text{g} of water is warmed from 21.4 ∘C21.4\ ^{\circ}\text{C} to 21.9 ∘C21.9\ ^{\circ}\text{C}. The heat supplied is Q=mc ΔTQ = mc\,\Delta T, with c=4.186 J g−1 ∘C−1c = 4.186\ \text{J g}^{-1}\ ^{\circ}\text{C}^{-1}.

    (a) Find ΔT\Delta T and state its number of significant figures, giving the rule used.

    (b) Calculate QQ and report it correctly.

    (c) Both thermometer readings had three significant figures and the other data had four. Explain how the precision of QQ became so poor, and suggest one change to the experiment that would improve it.

    Hard
    3 marks
  72. 72

    Question 72

    The distance covered by a uniformly accelerated body in the nthn^{\text{th}} second is often written as

    sn=u+a2(2n−1)s_{n} = u + \frac{a}{2}(2n - 1)

    where uu is the initial velocity, aa the acceleration and nn a pure number.

    (a) Show that, taken at face value, this equation fails the dimensional test.

    (b) Starting from s=ut+12at2s = ut + \tfrac{1}{2}at^{2}, derive the distance covered between t=(n−1)τt = (n-1)\tau and t=nτt = n\tau, where τ=1 s\tau = 1\ \text{s}, and use it to explain the apparent failure.

    (c) State what this example teaches about using the dimensional test.

    Hard
    3 marks
  73. 73

    Question 73

    The heat produced in a resistor is Q=I2RtQ = I^{2}Rt, where II is the current, RR the resistance and tt the time. The electrical power delivered is P=VIP = VI, where VV is the potential difference.

    (a) Find the dimensional formula of resistance RR.

    (b) Find the dimensional formula of potential difference VV.

    (c) The resistance of a wire of length ll and cross-sectional area AA is R=ρlAR = \dfrac{\rho l}{A}. Find the dimensional formula of the resistivity ρ\rho.

    (d) Use your answers to check whether Ohm's law, V=IRV = IR, is dimensionally consistent.

    Hard
    3 marks
  74. 74

    Question 74

    The period TT of a simple pendulum may depend on the mass mm of the bob, its length ll, the acceleration due to gravity gg, and the angular amplitude θ0\theta_{0} (in radians).

    (a) Write T=k mxlygzθ0wT = k\,m^{x}l^{y}g^{z}\theta_{0}^{w} and set up the dimensional equation. Find xx, yy and zz.

    (b) Show that the equation gives no information about ww, and explain why.

    (c) What is the most general form of TT that dimensional analysis allows, and how could the effect of θ0\theta_{0} actually be found?

    Hard
    3 marks
  75. 75

    Question 75

    The speed of light is c=2.99792458×108 m s−1c = 2.99792458 \times 10^{8}\ \text{m s}^{-1}. A signal is timed as 1.000 μs1.000\ \mu\text{s}.

    (a) Find the distance light travels in this time using the full value of cc, and again using cc rounded to 3.00×108 m s−13.00 \times 10^{8}\ \text{m s}^{-1}. Give each to the correct number of significant figures.

    (b) Is it acceptable to use the rounded value of cc when the answer is needed to four significant figures? Explain.

    Hard
    2 marks
  76. 76

    Question 76

    Coulomb's law for two charges q1q_{1}, q2q_{2} at distance rr is F=q1q24πε0r2F = \dfrac{q_{1}q_{2}}{4\pi\varepsilon_{0}r^{2}}. The force per unit length between two long parallel wires carrying currents I1I_{1} and I2I_{2} a distance dd apart is Fl=μ0I1I22πd\dfrac{F}{l} = \dfrac{\mu_{0}I_{1}I_{2}}{2\pi d}. Take charge == current ×\times time.

    (a) Find the dimensional formulae of ε0\varepsilon_{0} and μ0\mu_{0}.

    (b) Hence show that 1μ0ε0\dfrac{1}{\sqrt{\mu_{0}\varepsilon_{0}}} has the dimensions of speed.

    Hard
    2 marks
  77. 77

    Question 77

    A toy car runs along a straight track. The distance between two marks on the track is measured with a measuring tape marked in millimetres as 1.250 m1.250\ \text{m}, and a hand-held stopwatch reading to 0.1 s0.1\ \text{s} shows that the car takes 2.4 s2.4\ \text{s} to cover it.

    (a) Find the average speed of the car, reported with the correct number of significant figures.

    (b) A student suggests re-measuring the distance with a better tape, to 1.2500 m1.2500\ \text{m}. Would the speed then be known to more significant figures? To what time interval must the timer read for the speed to be reported to four significant figures, and what is the speed if the timer then shows 2.400 s2.400\ \text{s}?

    Hard
    2 marks
  78. 78

    Question 78

    A road-safety leaflet gives the braking distance of a car as d=0.0060 v2d = 0.0060\,v^{2}, with dd in metres and vv in km h−1\text{km h}^{-1}.

    (a) Explain why the number 0.00600.0060 cannot be a pure number. Find its dimensional formula and its unit as used in the leaflet.

    (b) Rewrite the rule for vv in m s−1\text{m s}^{-1}, and check that both forms give the same braking distance for a car moving at 72 km h−172\ \text{km h}^{-1}.

    Hard
    2 marks
  79. 79

    Question 79

    The density of nuclear matter is about 4.0×1017 kg m−34.0 \times 10^{17}\ \text{kg m}^{-3}, while that of iron is 7.0×103 kg m−37.0 \times 10^{3}\ \text{kg m}^{-3}.

    (a) Find the order of magnitude of each, and hence by how many orders of magnitude they differ.

    (b) Find the ratio of the two densities and its order of magnitude. Explain why it does not agree with (a).

    Hard
    2 marks
  80. 80

    Question 80

    A wheel of radius r=0.30 mr = 0.30\ \text{m} turns through exactly 1500∘1500^{\circ} in 2.0 s2.0\ \text{s}.

    Class 11 Physics Units And Measurments

    (a) Express the angle in radians, and find the length of the arc through which a point on the rim moves and the angular speed of the wheel in rad s−1\text{rad s}^{-1}, each to the correct number of significant figures.

    (b) The wheel turns at 125125 revolutions per minute. A student multiplies 125×0.30125 \times 0.30 and claims the rim speed is 37.5 m min−137.5\ \text{m min}^{-1}. Explain why this is not the rim speed.

    Hard
    2 marks