(a) Circumference =2πr=2×3.1416×2.1=13.19 cm.
The 2 is exact and π is used to more digits than the data, so only r=2.1 cm (two significant figures) limits the result. The dropped part (0.19) is less than half of 1, so the circumference is 13 cm.
(b) Area =πr2=3.1416×(2.1)2=3.1416×4.41=13.854 cm2.
Rounded to two significant figures, the dropped part (0.854) is more than half of 1, so the area is 14 cm2.
(c) With r=2.10 cm the calculation is the same, π×(2.10)2=13.854 cm2, but the radius now has three significant figures. So the area is reported to three significant figures: 13.9 cm2 (the dropped part, 0.054, is more than half of 0.1).
The trailing zero in 2.10 is significant: it shows the radius was measured to 0.01 cm, not 0.1 cm. The more precise measurement allows one more significant figure in the result, even though the numerical value of the radius has not changed.