Confirming your payment

Skip to content

Opening your dashboard

Class 11 Chemistry Chapter 4 Chemical Bonding and Molecular Structure: Competency-Based Questions (CBQ)

80 questions on Chapter 4, each worked through on its own page with the AI tutor. Class 11 Chemistry, CBSE 2026-27.

80 questions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    Nitrous oxide, N₂O ("laughing gas"), is mixed with oxygen and used as a mild anaesthetic in dentistry. Its skeleton is N–N–O. In one important Lewis structure, N=N=O, the terminal nitrogen carries two lone pairs, the central nitrogen has no lone pair and the oxygen carries two lone pairs.

    What are the formal charges on the terminal N, the central N and the O atom, respectively, in this structure?

    MCQMedium
    1 mark
  2. 2

    Question 2

    Ammonia for fertilisers is made by the Haber process. The N–H bonds of gaseous ammonia can be broken one at a time:

    NH3(g)→NH2(g)+H(g);  449 kJ mol−1\text{NH}_3(\text{g}) \rightarrow \text{NH}_2(\text{g}) + \text{H}(\text{g});\ \ 449\ \text{kJ mol}^{-1} NH2(g)→NH(g)+H(g);  384 kJ mol−1\text{NH}_2(\text{g}) \rightarrow \text{NH}(\text{g}) + \text{H}(\text{g});\ \ 384\ \text{kJ mol}^{-1} NH(g)→N(g)+H(g);  339 kJ mol−1\text{NH}(\text{g}) \rightarrow \text{N}(\text{g}) + \text{H}(\text{g});\ \ 339\ \text{kJ mol}^{-1}

    What value should be quoted as the N–H bond enthalpy in ammonia?

    MCQMedium
    1 mark
  3. 3

    Question 3

    Old glow-in-the-dark paints used a metal sulfide phosphor. In this compound, both the cation and the anion have the electronic configuration of argon, and the cation carries a charge of +2.

    Which compound fits this description?

    MCQMedium
    1 mark
  4. 4

    Question 4

    Phosgene, COCl₂, is used in industry to make polycarbonate plastics. In its molecule, the carbon atom is bonded to the oxygen atom and to both chlorine atoms, and every atom obeys the octet rule.

    How many lone pairs of electrons are there in the whole molecule?

    MCQMedium
    1 mark
  5. 5

    Question 5

    Strontium oxide, SrO, is used in heat-resistant ceramics; it melts at 2531 °C. Rubidium fluoride, RbF, melts at only 795 °C. Both have the rock-salt structure. Their interionic distances (Sr²⁺ 118 + O²⁻ 140 = 258 pm; Rb⁺ 152 + F⁻ 133 = 285 pm) differ by only about 10%, and their molar masses are almost equal (103.6 and 104.5 g mol⁻¹).

    What is the main reason for the very much higher melting point of SrO?

    MCQMedium
    1 mark
  6. 6

    Question 6

    Ammonium chloride, NH₄Cl, is the electrolyte paste in dry cells. Its solid has a crystal lattice of the same type as CsCl, and its aqueous solution conducts electricity, yet the compound contains no metal atom.

    Which statement correctly describes the bonding in NH₄Cl?

    MCQMedium
    1 mark
  7. 7

    Question 7

    Carbonyl sulfide, OCS, is the most abundant sulfur-containing gas in the Earth's atmosphere. Like carbon dioxide, it is a linear molecule (O=C=S). However, its dipole moment is 0.71 D, while that of CO₂ is 0 D.

    Which statement explains the difference?

    MCQMedium
    1 mark
  8. 8

    Question 8

    Sodium cyanide is used to extract gold from its ores. The cyanide ion, CN⁻, is isoelectronic with the N₂ molecule. NCERT Table 4.2 gives the average bond lengths C–N 143 pm, C=N 128 pm and C≡N 116 pm, and Table 4.3 gives the N≡N bond length in N₂ as 109 pm.

    What is the best prediction of the carbon–nitrogen bond length in CN⁻?

    MCQMedium
    1 mark
  9. 9

    Question 9

    A chemist has two bottles labelled P and Q, containing the two isomers of 1,2-dichloroethene, ClCH=CHCl. Both molecules are planar. In the cis isomer the two Cl atoms are on the same side of the C=C bond, and in the trans isomer they are on opposite sides.

    • Liquid P: boiling point 60 °C, dipole moment 1.90 D
    • Liquid Q: boiling point 48 °C, dipole moment 0 D

    Which conclusion is correct?

    MCQMedium
    1 mark
  10. 10

    Question 10

    Ozone in the stratosphere absorbs harmful ultraviolet radiation. In each resonance structure of O₃, the central oxygen atom is joined to one terminal oxygen by a double bond and to the other by a single bond, and it carries a formal charge of +1. What shape and approximate O–O–O bond angle does VSEPR theory predict for the ozone molecule?

    MCQMedium
    1 mark
  11. 11

    Question 11

    Formalin, used to preserve biological specimens, is an aqueous solution of formaldehyde, HCHO (H₂C=O). When formaldehyde is reduced, it gives methanol, CH₃OH. Which option correctly describes the geometry around the carbon atom before and after this reduction?

    MCQMedium
    1 mark
  12. 12

    Question 12

    Calcium carbide, CaC₂, used in old miners' lamps to produce acetylene, contains the acetylide ion C₂²⁻. Using molecular orbital theory (for a species with 14 electrons, the π2p orbitals lie below σ2p, as in N₂), what are the bond order and the magnetic nature of C₂²⁻?

    MCQMedium
    1 mark
  13. 13

    Question 13

    The graph shows the boiling points of the hydrides of group 16 elements.

    Class 11 Chemistry Chemical Bonding and Molecular Structure

    From H₂Te to H₂S the boiling point falls as the molar mass falls, so continuing this trend predicts a boiling point well below 213 K for H₂O. Which statement best explains why water actually boils at 373 K?

    MCQMedium
    1 mark
  14. 14

    Question 14

    Some insect pheromones and fungal products contain an allene unit, C=C=C. In the simplest allene, H₂C=C=CH₂, the central carbon forms a double bond to each terminal carbon. Because the H atoms on the two ends lie in different planes, suitably substituted allenes can exist as non-superimposable mirror images. What is the hybridisation of the central carbon, and what is the angle between the plane of one terminal CH₂ group and the plane of the other?

    MCQMedium
    1 mark
  15. 15

    Question 15

    Xenon tetrafluoride, XeF₄, forms colourless crystals when xenon and fluorine are heated together. Xenon has 8 valence electrons, and each fluorine forms one single bond to xenon. Which option correctly gives the arrangement of the electron pairs around xenon and the shape of the molecule?

    MCQMedium
    1 mark
  16. 16

    Question 16

    Hydrogen cyanide, H–C≡N, is used as a fumigant in warehouses. The molecule is linear. Which option correctly describes the orbital overlaps that form the bonds in HCN?

    MCQMedium
    1 mark
  17. 17

    Question 17

    In photodynamic therapy for some cancers, a dye absorbs light and converts ordinary O₂ into "singlet oxygen", an excited state that attacks tumour cells. In singlet oxygen, the two electrons that occupy the π2p orbitals of ground-state O₂ are paired in the same π orbital, while the number of electrons in each type of molecular orbital is unchanged. What are the bond order and magnetic nature of singlet oxygen?

    MCQMedium
    1 mark
  18. 18

    Question 18

    2-Hydroxybenzaldehyde (OH group next to the –CHO group, used in perfumery) boils at 197 °C and distils over with steam. Its isomer 4-hydroxybenzaldehyde (OH group opposite the –CHO group) boils at about 310 °C and is not steam-volatile. Which explanation accounts for both observations?

    MCQMedium
    1 mark
  19. 19

    Question 19

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Phosphorus pentachloride, PCl₅, is a common chlorinating agent in the laboratory, but nitrogen, which is in the same group, does not form NCl₅.

    Reason (R): Nitrogen is a second-period element and has no d orbitals in its valence shell, so it cannot accommodate more than eight electrons around itself.

    MCQMedium
    1 mark
  20. 20

    Question 20

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): The C–Cl bond in chloroethane, the liquid used in sprays that numb the skin before minor procedures, is a polar covalent bond.

    Reason (R): The covalent radius of chlorine (99 pm) is larger than that of carbon (77 pm).

    MCQMedium
    1 mark
  21. 21

    Question 21

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Sulfur hexafluoride, SF₆, used as an insulating gas in high-voltage switchgear, has six identical S–F bonds, and every pair of adjacent S–F bonds makes an angle of 90°.

    Reason (R): Each S–F bond in SF₆ is polar, because fluorine is more electronegative than sulfur.

    MCQMedium
    1 mark
  22. 22

    Question 22

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Lithium vapour contains Li₂ molecules, which are diamagnetic.

    Reason (R): The bond order of Li₂ is ½.

    MCQMedium
    1 mark
  23. 23

    Question 23

    In the manufacture of the explosive TNT, toluene is nitrated with a mixture of concentrated nitric and sulfuric acids. The species that attacks the toluene molecule is the nitronium ion, NO₂⁺, in which nitrogen is the central atom.

    (a) Calculate the total number of valence electrons in NO₂⁺ and draw its Lewis structure in which every atom has an octet and the two oxygen atoms are bonded in the same way.

    (b) Calculate the formal charge on each atom in your structure and show that they add up to the charge on the ion.

    (c) Another octet structure can be written, [O≡N–O]⁺, with one lone pair on the triply bonded oxygen and three lone pairs on the singly bonded oxygen. Calculate the formal charges in this structure and explain why it is less important than your structure in (a).

    (d) State the N–O bond order in NO₂⁺ and predict the N–O bond length using NCERT Table 4.2 (N–O 136 pm, N=O 122 pm).

    Medium
    5 marks
  24. 24

    Question 24

    A company that makes anhydrous metal chlorides records their melting behaviour at 1 atm. The ionic radii of the cations are Na⁺ 102 pm, Mg²⁺ 72 pm and Al³⁺ 54 pm.

    Class 11 Chemistry Chemical Bonding and Molecular Structure

    (a) On the basis of ionic charge alone, which chloride would be expected to have the strongest attraction between its ions and hence the highest melting point? Does the data agree?

    (b) Use the charge and size of the cations to explain the actual trend in the data.

    (c) Molten NaCl is a good conductor of electricity, but liquid AlCl₃ (kept liquid under pressure) conducts very poorly. Explain.

    (d) Predict, with a reason, which of MgCl₂ and AlCl₃ is more likely to dissolve in a non-polar organic solvent such as benzene.

    Medium
    5 marks
  25. 25

    Question 25

    Vegetable oils are turned into margarine by catalytic hydrogenation: H₂ adds across the C=C double bonds of the oil in the presence of nickel. The simplest model of this reaction is

    CH2=CH2+H2→CH3CH3(Ni catalyst)\text{CH}_2\text{=}\text{CH}_2 + \text{H}_2 \rightarrow \text{CH}_3\text{CH}_3 \quad (\text{Ni catalyst})

    NCERT Table 4.2 gives the average bond lengths C=C = 133 pm and C–C = 154 pm.

    (a) State the hybridisation of each carbon atom and the H–C–H bond angle before and after the reaction.

    (b) Name the bonds broken and the bonds formed in the reaction, and state the type of orbital overlap in each.

    (c) Calculate the percentage increase in the carbon–carbon bond length, and explain the change.

    (d) Explain why the π bond, rather than the σ bond, is the part of the C=C bond that reacts with H₂.

    Medium
    5 marks
  26. 26

    Question 26

    In winter, ponds freeze from the top down, and fish survive in the liquid water below the ice. Use the data below to answer the questions that follow.

    PropertyValue
    Density of ice at 0 °C0.917 g cm−30.917\ \text{g cm}^{-3}
    Density of liquid water at 0 °C1.000 g cm−31.000\ \text{g cm}^{-3}
    Enthalpy of fusion of ice6.01 kJ mol−16.01\ \text{kJ mol}^{-1}
    Enthalpy of vaporisation of water40.7 kJ mol−140.7\ \text{kJ mol}^{-1}
    O–H bond enthalpy in water464.5 kJ mol−1464.5\ \text{kJ mol}^{-1}

    (a) Explain, in terms of hydrogen bonding, why ice is less dense than liquid water. Calculate the percentage increase in volume when 1 kg of water freezes.

    (b) In ice, each water molecule takes part in four hydrogen bonds. Calculate the number of hydrogen bonds present in 36 g of ice. (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\ \text{mol}^{-1})

    (c) Explain why the density of liquid water is greatest at about 4 °C, and why this protects life in a pond.

    (d) Compare the enthalpy of fusion and the enthalpy of vaporisation with the O–H bond enthalpy. What does this comparison show about the bonds broken when ice melts and when water boils?

    Medium
    5 marks
  27. 27

    Question 27

    In a classroom demonstration, thin streams of liquid are allowed to run out of burettes, and a charged plastic rod is held close to each stream. The measured dipole moments of methane and its chlorine derivatives are given below. All five molecules are tetrahedral, with carbon at the centre.

    Class 11 Chemistry Chemical Bonding and Molecular Structure

    (a) Explain why CH₄ and CCl₄ both have zero dipole moment although the C–Cl bond is far more polar than the C–H bond.

    (b) Why does CHCl₃ have a dipole moment while CCl₄ does not?

    (c) A stream of CHCl₃ bends towards the charged rod, but a stream of CCl₄ does not. Explain using the data.

    (d) Replacing H atoms of CH₃Cl by more Cl atoms does not keep increasing the dipole moment. Use the idea of bond dipoles to explain the trend from CH₃Cl to CCl₄.

    Medium
    4 marks
  28. 28

    Question 28

    Nitrogen dioxide, NO₂, is the brown gas seen in polluted city air. When a sealed tube of the brown gas is cooled in ice, the colour fades because NO₂ molecules join in pairs to form colourless dinitrogen tetroxide, N₂O₄, whose skeleton is O₂N–NO₂.

    (a) Count the valence electrons in NO₂ and state which limitation of the octet rule it illustrates.

    (b) Explain why NO₂ molecules readily combine in pairs.

    (c) Count the valence electrons in N₂O₄ and state whether every atom in N₂O₄ can have an octet.

    Medium
    3 marks
  29. 29

    Question 29

    Hydrogen cyanide, HCN, is a highly toxic gas on Earth. Its isomer hydrogen isocyanide, HNC, in which hydrogen is bonded to nitrogen instead of carbon, has been detected in cold interstellar clouds, but on Earth it quickly changes into HCN.

    (a) Draw the Lewis structures of H–C≡N and H–N≡C, showing all lone pairs.

    (b) Calculate the formal charges on carbon and nitrogen in each structure.

    (c) Use the formal charges to explain which isomer is more stable.

    Medium
    3 marks
  30. 30

    Question 30

    When a red-hot glass rod is plunged into a jar of hydrogen iodide, violet fumes of iodine appear around it. The same test in a jar of hydrogen chloride produces no change. Data for the H–X bonds of the hydrogen halides are given below (bond lengths from NCERT Table 4.3).

    Class 11 Chemistry Chemical Bonding and Molecular Structure

    (a) State the relationship between bond length and bond enthalpy shown by the data.

    (b) Explain this relationship in terms of the size of the halogen atom.

    (c) Use the data to explain the observations, and predict whether HBr would be decomposed more or less easily than HI.

    Medium
    3 marks
  31. 31

    Question 31

    Three fluorine-containing gases, CF₄, NF₃ and SF₆, are used to etch silicon wafers in the semiconductor industry.

    (a) For each molecule, state the number of bond pairs and lone pairs on the central atom, and name its shape.

    (b) Explain why the F–N–F angle in NF₃ is smaller than the F–C–F angle in CF₄, even though both central atoms are surrounded by four electron pairs.

    Medium
    3 marks
  32. 32

    Question 32

    Astronomers detect H₂ and the ion H₂⁺ in interstellar clouds. For H₂ the bond length is 74 pm and the bond dissociation enthalpy is 435.8 kJ mol⁻¹. For H₂⁺ these are found to be 106 pm and 256 kJ mol⁻¹. A third species, H₂⁻, has also been proposed.

    (a) Write the molecular orbital configurations of H₂, H₂⁺ and H₂⁻, and calculate the bond order of each.

    (b) Use the bond orders to explain why the H₂⁺ bond is longer and weaker than the H₂ bond.

    (c) Which of the three species are paramagnetic?

    Medium
    3 marks
  33. 33

    Question 33

    The two strands of DNA are held together by hydrogen bonds between bases on opposite strands. Adenine (A) pairs with thymine (T) through two hydrogen bonds, and guanine (G) pairs with cytosine (C) through three hydrogen bonds. A biotechnologist compares two short double-stranded segments. One strand of each is given below, and the other strand is complementary.

    Segment P: 5′-ATGCGCATTG-3′

    Segment Q: 5′-AATTATTAGC-3′

    (a) Calculate the total number of hydrogen bonds holding each double-stranded segment together.

    (b) When the segments are heated, their strands separate ("melt"). Predict which segment has the higher melting temperature, and give a reason.

    (c) Covalent bonds are much stronger than hydrogen bonds. Why is it important for DNA that its two strands are held together by hydrogen bonds rather than by covalent bonds?

    Medium
    3 marks
  34. 34

    Question 34

    Sodium hydroxide (caustic soda), used in soap making, contains hydroxide ions, OH⁻.

    (a) Draw the Lewis structure of the hydroxide ion and calculate the formal charge on the oxygen atom.

    (b) OH⁻ is isoelectronic with HF. Compare the formal charge on F in HF with that on O in OH⁻, and state where the charge of the ion is located.

    Medium
    2 marks
  35. 35

    Question 35

    Beryllium chloride, BeCl₂, is a starting material for making beryllium metal, which is used in X-ray windows. At high temperature its vapour contains separate BeCl₂ molecules.

    (a) Draw the Lewis structure of a gaseous BeCl₂ molecule and state how many electrons surround Be.

    (b) A student draws Cl=Be=Cl so that Be has an octet. Calculate the formal charges on Be and Cl in both structures and decide which structure is preferred.

    Medium
    2 marks
  36. 36

    Question 36

    An X-ray study of solid iodine, used to make antiseptic tincture of iodine, shows that the two atoms within one I₂ molecule are 267 pm apart, while the closest distance between iodine atoms in neighbouring molecules is 350 pm.

    (a) Calculate the covalent radius and the van der Waals radius of iodine.

    (b) Explain why the van der Waals radius is larger than the covalent radius.

    Medium
    2 marks
  37. 37

    Question 37

    Calcium hydride, CaH₂, is used to dry organic solvents because it reacts with traces of water. It is an ionic solid that contains hydride ions, H⁻.

    (a) Show the formation of CaH₂ from its atoms using Lewis symbols.

    (b) Name the noble gas whose electronic configuration is attained by each ion, and explain why the hydride ion is stable with only two electrons in its valence shell.

    Medium
    2 marks
  38. 38

    Question 38

    Bromine pentafluoride, BrF₅, has been tested as an oxidiser in rocket fuels. Bromine has 7 valence electrons, and each F atom forms one single bond to bromine. A student expects BrF₅ to be trigonal bipyramidal, like PCl₅, because both have five atoms around the central atom. Use VSEPR theory to predict the arrangement of electron pairs and the shape of BrF₅, and explain why the student's prediction is wrong.

    Medium
    2 marks
  39. 39

    Question 39

    The oceans absorb carbon dioxide from the air. In slightly alkaline seawater, the reaction

    CO2+OH−→HCO3−\text{CO}_2 + \text{OH}^- \rightarrow \text{HCO}_3^-

    turns linear O=C=O into the hydrogencarbonate ion, in which carbon is bonded to three oxygen atoms (one C=O and two C–O, one of which carries the H). State the hybridisation of carbon before and after the reaction, and explain why the O–C–O angle changes from 180° to about 120°.

    Medium
    2 marks
  40. 40

    Question 40

    At 20 °C, about 700 volumes of ammonia gas dissolve in one volume of water, which is why ammonia is sold as a concentrated aqueous solution. Phosphine, PH₃, which has a similar shape, is only slightly soluble in water. Explain this difference.

    Medium
    2 marks
  41. 41

    Question 41

    Formal charge and oxidation state are both "electron bookkeeping" numbers, but they are worked out with opposite assumptions about the shared electrons. Oxidation state assigns every shared pair to the more electronegative atom (electronegativity: O > Cl > N > C > H; S < O). Formal charge splits every shared pair equally. Consider the central atom in each of the following species, using the Lewis structure stated:

    • N in NH₄⁺ (four N–H bonds)
    • O in H₃O⁺ (three O–H bonds, one lone pair)
    • C in CH₂Cl₂, the paint-stripper solvent dichloromethane (four single bonds)
    • S in SO₄²⁻ (the structure with two S=O and two S–O⁻ bonds)

    For which central atom are the formal charge and the oxidation state equal?

    MCQHard
    1 mark
  42. 42

    Question 42

    A ceramics engineer is comparing four ionic solids for a heat-resistant coating. The ionic radii are: Ca²⁺ 100 pm, Ba²⁺ 135 pm, Li⁺ 76 pm, K⁺ 138 pm, O²⁻ 140 pm and F⁻ 133 pm.

    Treating the lattice enthalpy as increasing with the product of the ionic charges and decreasing with the distance between the ion centres, which order of decreasing lattice enthalpy is correct?

    MCQHard
    1 mark
  43. 43

    Question 43

    Bromine trifluoride, BrF₃, is used to convert uranium into volatile UF₆ during nuclear fuel processing. A student compares it with three other species that also break the octet rule.

    In which species is the central atom surrounded by exactly ten valence electrons (bond pairs plus lone pairs)?

    MCQHard
    1 mark
  44. 44

    Question 44

    Hydrogen bromide gas is used to make bromine compounds for medicines. NCERT gives its dipole moment as 0.79 D (Table 4.5) and the H–Br bond length as 141 pm (Table 4.3). Treating the molecule as two partial charges +δ and −δ separated by the bond length, what is the size of δ as a fraction of the electronic charge?

    (Use 1 D=3.33564×10−30 C m1\ \text{D} = 3.33564 \times 10^{-30}\ \text{C m} and e=1.602×10−19 Ce = 1.602 \times 10^{-19}\ \text{C}.)

    MCQHard
    1 mark
  45. 45

    Question 45

    NCERT Table 4.5 gives the dipole moments of three hydrides: H₂O 1.85 D, NH₃ 1.47 D and H₂S 0.95 D. H₂O and H₂S are bent and NH₃ is trigonal pyramidal. The Pauling electronegativities are H 2.1, S 2.5, N 3.0 and O 3.5.

    Which statement correctly explains the order H₂O > NH₃ > H₂S?

    MCQHard
    1 mark
  46. 46

    Question 46

    Copper(I) chloride, CuCl, is used as a catalyst in organic synthesis. Cu⁺ and Na⁺ have almost the same size and the same charge, yet CuCl melts at 423 °C and is almost insoluble in water, whereas NaCl melts at 801 °C and dissolves readily.

    Which explanation is correct?

    MCQHard
    1 mark
  47. 47

    Question 47

    Many rocket propellants and explosives, such as hydrazine (H₂N–NH₂) and azides, are nitrogen-rich compounds whose reactions produce N₂ gas. Average bond enthalpies (kJ mol⁻¹) are:

    BondN–NN=NN≡NC–CC=CC≡C
    Bond enthalpy163418946347614839

    Which conclusion do these data support?

    MCQHard
    1 mark
  48. 48

    Question 48

    Nitrosonium tetrafluoroborate, NO⁺BF₄⁻, is used as an oxidising agent in organic synthesis. Two Lewis structures can be written for NO⁺:

    • Structure I: [:N≡O:]⁺, one lone pair on each atom
    • Structure II: [:N=O:]⁺, one lone pair on N and two lone pairs on O, so nitrogen has only six electrons

    Which statement is correct?

    MCQHard
    1 mark
  49. 49

    Question 49

    Methyl isocyanate, CH₃NCO, the gas released in the 1984 Bhopal disaster, has the skeleton H₃C–N–C–O, with all three hydrogen atoms on the carbon of the methyl group.

    Which statement about its most important Lewis structure is correct?

    MCQHard
    1 mark
  50. 50

    Question 50

    Hydrazine, H₂N–NH₂, is a rocket fuel. Diimide, HN=NH, is a short-lived reagent used in the laboratory to reduce C=C bonds, and in doing so it is converted into N₂. Each nitrogen atom in all three species obeys the octet rule. What is the hybridisation of a nitrogen atom in N₂H₄, N₂H₂ (HN=NH) and N₂ respectively?

    MCQHard
    1 mark
  51. 51

    Question 51

    Chlorine trifluoride, ClF₃, is so reactive that it is used to clean deposits from the chambers of semiconductor plants. The Cl atom has 3 bond pairs and 2 lone pairs, which point to the five corners of a trigonal bipyramid. Three arrangements are possible: I (both lone pairs axial), II (one lone pair axial and one equatorial) and III (both lone pairs equatorial). Experiments show that ClF₃ adopts arrangement III, which is T-shaped. Counting only the repulsions between electron pairs at 90° (those at 120° and 180° are much weaker), which option gives the correct numbers for arrangement III and the correct reason it is preferred?

    MCQHard
    1 mark
  52. 52

    Question 52

    Liquid bromine trifluoride conducts electricity because it ionises slightly:

    2 BrF3⇌BrF2++BrF4−2\,\text{BrF}_3 \rightleftharpoons \text{BrF}_2^{+} + \text{BrF}_4^{-}

    Bromine has 7 valence electrons. Which option correctly gives the shape of each ion and the hybridisation of bromine in it?

    MCQHard
    1 mark
  53. 53

    Question 53

    In matrix-isolation experiments, chemists can add electrons to diatomic molecules trapped in solid argon. Two electrons are added to each molecule below to give the dianion. Use the NCERT orbital orders (π2p below σ2p for species with up to 14 electrons, σ2p below π2p for species with more electrons). For which conversion does the species change from paramagnetic to diamagnetic and its bond order increase?

    MCQHard
    1 mark
  54. 54

    Question 54

    A student claims that species with the same shape must have the same hybridisation of the central atom. Which pair of species disproves this claim, because the two species have the same shape but different hybridisation of the central atom?

    MCQHard
    1 mark
  55. 55

    Question 55

    A food technologist compares the viscosities of three liquids at 20 °C:

    Liquid–OH groups per moleculeMolar mass / g mol⁻¹Viscosity / mPa s
    ethanol, CH₃CH₂OH1461.2
    ethane-1,2-diol (antifreeze)26219.9
    propane-1,2,3-triol (glycerol)3921412

    Which explanation best accounts for the enormous rise in viscosity?

    MCQHard
    1 mark
  56. 56

    Question 56

    Potassium hydrogen difluoride, KHF₂, is a stable salt used in etching glass. It contains the [F–H···F]⁻ ion, held together by an exceptionally strong hydrogen bond. The corresponding chlorine compound, KHCl₂, does not form under ordinary conditions. Which explanation is correct?

    MCQHard
    1 mark
  57. 57

    Question 57

    Electron-attachment and photoionisation experiments are carried out on diatomic molecules in the gas phase. For which molecule does the bond order increase when it gains one electron and decrease when it loses one electron? (Use the NCERT orbital orders: π2p below σ2p for N₂ and lighter molecules, σ2p below π2p for O₂ and F₂.)

    MCQHard
    1 mark
  58. 58

    Question 58

    Molecular orbital theory uses two orders of energy levels for second-period diatomics: order 1 with π2p below σ2p, and order 2 with σ2p below π2p. A spectroscopist wants a molecule whose paramagnetism is predicted correctly by either order, so that the prediction does not depend on which order is used. Which molecule should she choose?

    MCQHard
    1 mark
  59. 59

    Question 59

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Magnesium burns in air with a dazzling flame to form MgO, which contains Mg²⁺ and O²⁻ ions, even though removing the second electron from magnesium needs about twice the energy of the first (1451 and 738 kJ mol⁻¹).

    Reason (R): In MgO, both the Mg²⁺ and the O²⁻ ions have the electronic configuration of neon, a complete octet.

    MCQHard
    1 mark
  60. 60

    Question 60

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): HI (bond length 160 pm) has a larger dipole moment than HBr (bond length 141 pm).

    Reason (R): Iodine is more electronegative than bromine.

    MCQHard
    1 mark
  61. 61

    Question 61

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Although B₂ and F₂ both have a bond order of 1, the bond dissociation enthalpy of B₂ (290 kJ mol⁻¹) is nearly twice that of F₂ (159 kJ mol⁻¹).

    Reason (R): B₂ is diamagnetic while F₂ is paramagnetic, and unpaired electrons weaken a bond.

    MCQHard
    1 mark
  62. 62

    Question 62

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Hydrogen fluoride (M = 20 g mol⁻¹) has a higher boiling point than water (M = 18 g mol⁻¹), because an F–H···F hydrogen bond is stronger than an O–H···O hydrogen bond.

    Reason (R): On average, each HF molecule takes part in more hydrogen bonds than each H₂O molecule.

    MCQHard
    1 mark
  63. 63

    Question 63

    Car airbags are inflated by nitrogen gas released when sodium azide, NaN₃, decomposes. The azide ion, N₃⁻, is linear, with the three nitrogen atoms in a row.

    (a) Calculate the total number of valence electrons in N₃⁻ and draw three Lewis structures (canonical forms) in which every atom has an octet, showing the formal charge on each atom.

    (b) Which canonical form contributes most to the resonance hybrid? Give two reasons.

    (c) X-ray studies of NaN₃ show that both N–N bonds are 117 pm long. Explain why the two bonds are identical.

    (d) In hydrazoic acid, HN₃, a hydrogen atom is attached to one terminal nitrogen (H–N–N–N). Its N–N bond lengths are 124 pm (the bond next to the N–H group) and 113 pm (the terminal bond). Using the canonical forms that are possible for HN₃, explain why the two bonds are unequal and which one is shorter.

    Hard
    5 marks
  64. 64

    Question 64

    Phosphate fertilisers and the mineral of bones contain the phosphate ion, PO₄³⁻, in which phosphorus is bonded to four oxygen atoms.

    (a) Calculate the total number of valence electrons in PO₄³⁻. Draw a Lewis structure in which every atom obeys the octet rule, and calculate the formal charge on each atom.

    (b) Draw a structure with one P=O double bond. Calculate the formal charges, and state the number of electrons around phosphorus.

    (c) X-ray studies show that all four P–O bonds in the phosphate ion are 154 pm long. How many equivalent canonical forms of the type in (b) can be drawn? Calculate the average P–O bond order and the average charge on each oxygen atom in the hybrid.

    (d) In a molecule of phosphoric acid, H₃PO₄, one P–O bond is shorter (about 152 pm) than the other three (about 157 pm), which are the bonds to OH groups. Explain why H₃PO₄ does not have four equal P–O bonds.

    Hard
    5 marks
  65. 65

    Question 65

    Electron-diffraction measurements on phosphorus pentachloride vapour show two different P–Cl bond lengths: 214 pm for the two axial bonds and 202 pm for the three equatorial bonds. On heating, PCl₅ decomposes reversibly:

    PCl5⇌PCl3+Cl2\text{PCl}_5 \rightleftharpoons \text{PCl}_3 + \text{Cl}_2

    (a) State the hybridisation of phosphorus and the shape of PCl₅. A PCl₅ molecule has ten Cl–P–Cl angles. How many of them are 90°, how many are 120° and how many are 180°?

    (b) Calculate by what percentage the axial bonds are longer than the equatorial bonds.

    (c) Which bonds are most likely to break when PCl₅ is heated, and what are the hybridisation of phosphorus and the shape of the PCl₃ formed?

    (d) Although PCl₅ has two different bond lengths, its dipole moment is zero. Explain.

    Hard
    5 marks
  66. 66

    Question 66

    Photoelectron spectroscopy and ion-beam experiments give the following data for nitrogen and oxygen:

    SpeciesBond length / pmBond dissociation enthalpy / kJ mol⁻¹
    N₂110945
    N₂⁺112842
    O₂121498
    O₂⁺112643

    First ionisation enthalpies (kJ mol⁻¹): N atom 1402, N₂ molecule 1503, O atom 1314, O₂ molecule 1165.

    (a) Write the valence-shell molecular orbital configurations of N₂ and O₂, using the NCERT order for each.

    (b) Identify the molecular orbital from which an electron is removed when each molecule is ionised, and calculate the bond orders of N₂⁺ and O₂⁺.

    (c) Explain why ionisation makes the N–N bond longer and weaker but the O–O bond shorter and stronger.

    (d) Explain why it is harder to ionise an N₂ molecule than an N atom, but easier to ionise an O₂ molecule than an O atom.

    Hard
    5 marks
  67. 67

    Question 67

    Proteins are long chains of amino acids joined by peptide groups. X-ray studies give the bond lengths shown for a peptide unit (Cα is the carbon atom of each amino acid). NCERT Table 4.2 gives the average lengths C–N 143 pm, C=N 128 pm and C=O 121 pm.

    Class 11 Chemistry Chemical Bonding and Molecular Structure

    (a) Draw a second canonical structure of the peptide group by moving the lone pair on nitrogen and one electron pair of the C=O bond. Calculate the formal charges on N and O in this structure.

    (b) Use the measured C–N lengths (132 pm for C–N in the peptide group and 146 pm for N–Cα) to show that the C–N bond of the peptide group has partial double-bond character.

    (c) Explain why the C=O bond in the peptide group (124 pm) is slightly longer than a normal C=O bond.

    (d) Peptide groups have large dipole moments (about 3.7 D). Explain this using your structure from (a).

    Hard
    4 marks
  68. 68

    Question 68

    Aluminium bromide is used as a catalyst in the Friedel–Crafts reactions that make many dyes and medicines. In the vapour at moderate temperatures it exists mainly as Al₂Br₆, in which two bromine atoms form bridges between the two aluminium atoms and each aluminium is bonded to four bromine atoms.

    (a) How many electrons surround aluminium in a single AlBr₃ molecule? Explain why AlBr₃ readily accepts an electron pair.

    (b) Explain how the formation of Al₂Br₆ allows each aluminium atom to complete its octet.

    (c) Calculate the formal charges on an aluminium atom and on a bridging bromine atom in Al₂Br₆, and show that the molecule is neutral overall.

    Hard
    3 marks
  69. 69

    Question 69

    Graphite, used in pencils and as electrodes, is made of flat sheets in which every carbon atom is bonded to three other carbon atoms. The measured carbon–carbon bond lengths in several substances are shown below.

    Class 11 Chemistry Chemical Bonding and Molecular Structure

    (a) Use resonance to find the carbon–carbon bond order in benzene.

    (b) In any one Lewis structure of a graphite sheet, each carbon atom forms one C=C double bond and two C–C single bonds, and the double bond can be placed to any of its three neighbours. Find the average carbon–carbon bond order in graphite.

    (c) Show that the measured bond lengths are consistent with your bond orders.

    Hard
    3 marks
  70. 70

    Question 70

    Carbon monoxide is poisonous because it binds strongly to the iron of haemoglobin through its carbon atom. Its dipole moment is very small, only 0.11 D, and experiments show that the negative end of the dipole is at the carbon atom, even though oxygen is more electronegative than carbon.

    (a) The Lewis structure of CO is :C≡O:, with one lone pair on each atom. Calculate the formal charges on C and O.

    (b) Use your answer to explain why the dipole moment of CO is so small and why its negative end is at carbon.

    (c) Suggest why CO bonds to iron through carbon rather than through oxygen.

    Hard
    3 marks
  71. 71

    Question 71

    In its ground state, carbon (1s² 2s² 2p²) has only two unpaired electrons, yet it forms methane, CH₄, rather than CH₂. Use the data below.

    • Energy needed to promote carbon from 2s² 2p² to 2s¹ 2p³: 406 kJ mol⁻¹
    • Average C–H bond enthalpy: 414 kJ mol⁻¹

    (a) Calculate the energy released when carbon forms CH₂ (two C–H bonds, no promotion) and when it forms CH₄ (promotion followed by four C–H bonds). By how much is the CH₄ route more favourable?

    (b) After promotion, suppose carbon used its three unhybridised 2p orbitals for three of the C–H bonds. Predict the H–C–H angle between these three bonds, and compare it with the measured 109.5°.

    (c) What does this comparison show about the orbitals carbon actually uses in CH₄?

    Hard
    3 marks
  72. 72

    Question 72

    Vapour-density measurements on acetic acid, CH₃COOH (M = 60 g mol⁻¹), just above its boiling point give an apparent molar mass of 102 g mol⁻¹. Assume the vapour contains only single molecules (monomers) and pairs of molecules (dimers).

    (a) Draw the structure of the acetic acid dimer, showing the hydrogen bonds that hold it together.

    (b) Calculate the percentage of acetic acid molecules that are present as dimers in the vapour.

    (c) In dilute aqueous solution, measurements show that acetic acid is not dimerised. Explain why.

    Hard
    3 marks
  73. 73

    Question 73

    Chlorine forms three stable neutral fluorides, ClF, ClF₃ and ClF₅. Neutral ClF₂ and ClF₄ are not isolated as stable compounds, and ClF₇ is unknown, although iodine forms IF₇. Chlorine has 7 valence electrons, and each F atom forms one single bond to chlorine.

    (a) Explain, by counting the electrons left on chlorine, why the stable neutral chlorine fluorides have an odd number of F atoms.

    (b) The cation ClF₆⁺ is known (in the salt ClF₆⁺PtF₆⁻). Use the same counting to show that it has no unpaired electron.

    (c) Suggest why chlorine cannot form ClF₇ while iodine forms IF₇. (Covalent radii: Cl 99 pm, I 133 pm.)

    Hard
    3 marks
  74. 74

    Question 74

    Sulfur dioxide, SO₂, released by burning coal, is a bent molecule in which both S–O bonds are found to be 143 pm long. It can be drawn either as an octet structure O=S–O (two such forms, giving a resonance hybrid) or as an expanded-octet structure O=S=O.

    (a) NCERT Table 4.4 gives covalent radii S 104 pm (single bond), 95 pm (double bond) and O 66 pm (single bond), 57 pm (double bond). Predict the S–O and S=O bond lengths and decide which kind of structure fits the measured length of 143 pm.

    (b) Calculate by what percentage the measured 143 pm is shorter than (i) the octet-hybrid prediction and (ii) the S=O prediction.

    Hard
    2 marks
  75. 75

    Question 75

    Boron trichloride and phosphorus trichloride are both used in making semiconductors, and both have the formula ACl₃. The dipole moment of BCl₃ is 0, while that of PCl₃ is 0.56 D.

    (a) Write the Lewis structure of each molecule and state the number of electrons around the central atom.

    (b) What do the dipole moment data reveal about the arrangement of the bonds in the two molecules, and which drawback of the Lewis (octet) approach does this illustrate?

    Hard
    2 marks
  76. 76

    Question 76

    Methane, CH₄, and silane, SiH₄ (used to deposit silicon films for solar cells), are both tetrahedral molecules. Methane does not react with water, but silane reacts with water containing a trace of alkali, releasing hydrogen gas. The Pauling electronegativities are C 2.5, H 2.1 and Si 1.8.

    (a) Show the direction of polarity of the C–H bond and of the Si–H bond.

    (b) Use the bond polarities to explain why the hydrogen atoms of silane combine with the hydrogen of water to form H₂.

    Hard
    2 marks
  77. 77

    Question 77

    Bond enthalpies (kJ mol⁻¹) are: H–H 435.8, F–F 159, I–I 151, H–F 565 and H–I 299.

    (a) For H–F and for H–I, calculate the average of the bond enthalpies of the two homonuclear molecules (H₂ with F₂, and H₂ with I₂), and compare it with the measured heteronuclear bond enthalpy.

    (b) Explain the difference between the two cases.

    Hard
    2 marks
  78. 78

    Question 78

    In the nitration of benzene, the attacking species is the nitronium ion, NO₂⁺. Nitrogen dioxide, NO₂, is a brown pollutant gas, and NO₂⁻ is the nitrite ion. Arrange NO₂⁺, NO₂ and NO₂⁻ in decreasing order of O–N–O bond angle, and explain the order using VSEPR theory.

    Hard
    2 marks
  79. 79

    Question 79

    Iodine pentafluoride, IF₅, is a fluorinating agent. Electron-diffraction studies show that each F(apical)–I–F(basal) angle in IF₅ is about 82°, not the 90° expected for an ideal square pyramid. IF₅ is square pyramidal: iodine has 5 bond pairs and 1 lone pair, arranged octahedrally. Explain, using VSEPR theory, why the F(apical)–I–F(basal) angle is less than 90°.

    Hard
    2 marks
  80. 80

    Question 80

    A student mixes 50.0 mL of ethanol (density 0.789 g mL⁻¹) with 50.0 mL of water (density 0.998 g mL⁻¹) at 20 °C. The mixture becomes warm, and after it cools back to 20 °C its volume is 96.4 mL.

    (a) Calculate the percentage contraction in volume, the density of the mixture, and the density it would have if there were no contraction.

    (b) Explain the warming and the contraction in terms of hydrogen bonding.

    Hard
    2 marks