Opening your dashboard
Class 12 Chemistry Chapter 6 Haloalkanes and Haloarenes: Previous Year Questions
37 questions on Chapter 6, each solved step by step. Class 12 Chemistry, CBSE 2026-27.
37 questions with solutions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
The conversion of an alkyl halide into an alcohol by aqueous NaOH is classified as:
Solve with AIAnswer
(A) a dehydrohalogenation reaction
- Correct
(B) a substitution reaction
(C) an addition reaction
(D) a dehydration reaction
Option (B) is correct.
Explanation: In aqueous NaOH the hydroxide ion acts as a nucleophile. It attacks the carbon bonded to the halogen and the halide ion leaves, so one group simply replaces another:
For example, bromoethane gives ethanol:

This is nucleophilic substitution, the most typical reaction of haloalkanes.
Why the other options are wrong:
- (A) Dehydrohalogenation removes H and X from adjacent carbons to form an alkene. That happens with alcoholic KOH, not aqueous NaOH.
- (C) An addition reaction joins two molecules across a multiple bond. R–X has no C=C bond to add to.
- (D) Dehydration removes water, usually from an alcohol, to give an alkene. Here an alcohol is formed, not used up.
- 21 mark
Question 2
Which of the following is not correct?
Solve with AIAnswer
(A) In haloarenes, the electron pairs on the halogen atom are in conjugation with the π-electrons of the ring.
- Correct
(B) The carbon–magnesium bond in a Grignard reagent is covalent and non-polar in nature.
(C) During an reaction, the carbocation formed in the slow step, being hybridised, is planar.
(D) Out of and , is more reactive towards an reaction.
Option (B) is correct.
Explanation: In a Grignard reagent, , carbon (electronegativity 2.5) is bonded to the electropositive metal magnesium (1.2). The C–Mg bond is covalent but highly polar: carbon carries a partial negative charge and magnesium a partial positive charge.
That polarity is exactly why the alkyl group behaves like a carbanion and pulls a proton from water to give an alkane. Calling the bond "non-polar" is wrong, so (B) is the incorrect statement.
Why the other statements are correct:
- (A) A lone pair on the halogen overlaps with the π-system of the ring (resonance). This gives the C–X bond partial double bond character.
- (C) In the C–X bond breaks first. The carbocation is hybridised and trigonal planar, which is why the nucleophile can attack from either face.
- (D) Benzyl chloride ionises to a benzyl carbocation stabilised by resonance with the ring. Vinyl chloride would have to form a vinyl cation, which is not stabilised, and its C–Cl bond has partial double bond character. So benzyl chloride reacts much faster by .
- 31 mark
Question 3
The conversion of an alkyl halide into an alkene by alcoholic KOH is classified as:
Solve with AIAnswer
(A) a substitution reaction
(B) an addition reaction
- Correct
(C) a dehydrohalogenation reaction
(D) a dehydration reaction
Option (C) is correct.
Explanation: When a haloalkane with a β-hydrogen is heated with alcoholic KOH, the base removes a hydrogen atom from the β-carbon and the halogen leaves from the α-carbon. A molecule of HX is lost and a C=C bond forms:

Because H and halogen are removed, this is called dehydrohalogenation. NCERT also calls it β-elimination.
Why the other options are wrong:
- (A) Substitution would put OH in place of X and give an alcohol. That is what aqueous KOH does.
- (B) Addition is the reverse direction: HX adding across a C=C bond.
- (D) Dehydration removes water from an alcohol. Here HX is removed from a haloalkane.
- 41 mark
Question 4
Which one of the following compounds is most reactive towards an reaction?
Solve with AIAnswer
- Correct
(A)
(B)
(C)
(D)
Option (A) is correct.
Explanation: The slow step of an reaction is ionisation of the C–Br bond to a carbocation. The more stable the carbocation, the faster it forms and the faster the reaction.

- (A) gives the diphenylmethyl cation . The positive charge is spread by resonance over two benzene rings, so it is the most stable and forms fastest.
- (D) gives : one ring for resonance plus a methyl group (hyperconjugation and +I). Stable, but less so than (A).
- (B) gives the benzyl cation , stabilised by only one ring.
- (C) Vinyl bromide would form a vinyl cation, which is not stabilised. Its C–Br bond also has partial double bond character, so it does not undergo at all.
Order of reactivity: (A) > (D) > (B) > (C).
- 51 mark
Question 5
The IUPAC name of the compound shown below is:
Solve with AIAnswer
(A) 2-bromo-6-chlorocyclohex-1-ene
(B) 6-bromo-2-chlorocyclohexene
- Correct
(C) 3-bromo-1-chlorocyclohexene
(D) 1-bromo-3-chlorocyclohexene
Option (C) is correct.
Explanation: In a cycloalkene the two double-bond carbons must be C-1 and C-2, and numbering then runs through the double bond so that the substituents get the lowest set of locants.

- Start at the carbon carrying Cl (C-1), go across the double bond to C-2, then to the carbon carrying Br: Br is on C-3. Locant set {1, 3}.
- Start at the other double-bond carbon: Cl is on C-2 and Br ends up on C-6. Locant set {2, 6}, which is higher.
So the locants are 1 (Cl) and 3 (Br). Prefixes are cited alphabetically, bromo before chloro: 3-bromo-1-chlorocyclohexene (also written 3-bromo-1-chlorocyclohex-1-ene).
Why the other options are wrong:
- (B) uses the rejected {2, 6} numbering. (A) also has the higher set {2, 6}, and in addition it puts Br on the double-bond carbon and Cl on C-6, so it describes the halogen-swapped compound of option (D), not this one.
- (D) swaps the halogens: it puts Br on the double-bond carbon and Cl on C-3, which is a different compound.
- 61 mark
Question 6
Racemisation occurs in:
Solve with AIAnswer
- Correct
(A) reaction
(B) reaction
(C) neither nor reaction
(D) reaction as well as reaction
Option (A) is correct.
Explanation: In an reaction of an optically active halide, the C–X bond breaks first and gives a planar, carbocation. The nucleophile can attack this flat ion from either face with equal probability:
- attack from the face the halogen left gives the product with the same configuration (retention);
- attack from the opposite face gives the inverted configuration.

The two products are enantiomers formed in nearly equal amounts. Their rotations cancel, so the product is a racemic mixture (optically inactive). Converting one enantiomer into a racemic mixture is called racemisation.
Why the other options are wrong:
- (B) is a single step with backside attack. It gives only the product with inverted configuration, so it does not racemise.
- (C) and (D) are ruled out because racemises and does not.
- 71 mark
Question 7
Retention of configuration is observed in:
Solve with AIAnswer
- Correct
(A) reaction
(B) reaction
(C) neither nor reaction
(D) reaction as well as reaction
Option (A) is correct.
Explanation: Retention means the new group ends up in the same spatial position that the leaving group occupied, so the product keeps the configuration of the starting compound. Inversion means the new group ends up on the opposite side.

- In the leaving group departs first and leaves a planar carbocation. Attack on the face the halogen left gives the retained product; attack on the other face gives the inverted product. Both form, which is why the overall result is racemisation. So retention is observed in (as one half of the racemic product).
- In the nucleophile must attack from the side opposite the leaving group, in one step. Only the inverted product forms, so retention is never observed.
Why the other options are wrong: (B) and (D) wrongly credit with retention, and (C) ignores the retained half of the product.
- 81 mark
Question 8
Inversion of configuration occurs in:
Solve with AIAnswer
(A) reaction
(B) reaction
(C) neither nor reaction
- Correct
(D) as well as reaction
Option (D) is correct.
Explanation:
: the nucleophile attacks the carbon from the side opposite the halogen. As the new bond forms and the C–X bond breaks, the other three groups flip over like an umbrella in the wind. Every product molecule has the inverted configuration.

: the planar carbocation is attacked from both faces. Attack from the face opposite the departed halogen gives the inverted product and attack from the same face gives the retained product. So inversion also occurs, in about half the product molecules. The result is racemisation.
Inversion is therefore seen in both mechanisms: completely in , and partly (with an equal amount of retention) in .
Why the other options are wrong:
- (A) is incomplete: it ignores the inverted half of the product.
- (B) is incomplete: is the textbook example of inversion.
- (C) contradicts both mechanisms.
- 91 mark
Question 9
Three graphs P, Q and R have been drawn to represent the relative rates of hydrolysis of primary, secondary and tertiary haloalkanes.

Which of the following correctly identifies the graphs that represent the and reactions?
Solve with AIAnswer
(A) : graph P; : graph Q
(B) : graph Q; : graph P
(C) : graph R; : graph Q
- Correct
(D) : graph Q; : graph R
Option (D) is correct.
Explanation: Use the two reactivity orders from NCERT.
- depends on carbocation stability: . The rate should rise steadily from primary to tertiary. That is graph Q.
- depends on steric hindrance to backside attack: . The rate should fall steadily from primary to tertiary. That is graph R.
Graph P dips at secondary and then rises (primary > secondary < tertiary). It follows neither single order, so it cannot represent either mechanism on its own.
Why the other options are wrong: (A) and (B) use graph P, which fits neither mechanism. (C) assigns the falling graph R to and the rising graph Q to , the reverse of both orders.
- 101 mark
Question 10
The table below shows some of the features of and reaction mechanisms.
Row A first order kinetics second order kinetics B reaction favoured by any type of nucleophile reaction favoured by a non-bulky nucleophile C reaction favoured by a good leaving group reaction not favoured by a good leaving group D stereochemistry: racemisation stereochemistry: inversion Which row shows an incorrect feature for at least one of the mechanisms?
Solve with AIAnswer
(A) Row A
(B) Row B
- Correct
(C) Row C
(D) Row D
Option (C) is correct.
Explanation: In both mechanisms the C–X bond breaks in the slow step: in it breaks to form the carbocation, and in it breaks at the same time as the nucleophile bonds. A good leaving group (a weaker C–X bond, as in R–I) lowers the energy needed for that step and speeds up both reactions. So " not favoured by a good leaving group" is wrong.
Checking the other rows:
- Row A is correct: rate for and rate for .
- Row B is correct: the nucleophile is not involved in the slow step of , but in it must squeeze in from the back, so a small nucleophile is favoured.
- Row D is correct: planar carbocation → racemisation; backside attack → inversion.
- 111 mark
Question 11
Which of the following will be the major product of the reaction below?
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation: HBr adds across the C=C bond of but-1-ene. The attaches first. If it goes to C-1 (the CH end, which has more hydrogens) the positive charge is left on C-2, giving a secondary carbocation. That is more stable than the primary carbocation formed the other way, so this path wins. then bonds to C-2 (Markovnikov's rule):

The major product is 2-bromobutane, .
Why the other options are wrong:
- (A) 1-Bromobutane comes from the less stable primary carbocation. It is only a minor product (it becomes major only with HBr in the presence of peroxide).
- (C) and (D) still contain a C=C bond and have two hydrogen atoms fewer (). Addition of HBr gives a saturated product, .
- 121 mark
Question 12
Assertion (A): Chlorobenzene is resistant to nucleophilic substitution at room temperature.
Reason (R): The C–Cl bond gets weaker due to resonance.
Solve with AIAnswer
(A) Both A and R are true and R is the correct explanation of A.
(B) Both A and R are true but R is not the correct explanation of A.
- Correct
(C) A is true but R is false.
(D) A is false but R is true.
Option (C) is correct.
Explanation:
Assertion is true. Chlorobenzene does not react with aqueous NaOH at room temperature. It needs 623 K and 300 atm to give phenol.
Reason is false. A lone pair on chlorine is delocalised into the ring (structures II–IV below). This gives the C–Cl bond partial double bond character, which makes it stronger and shorter (169 pm, against 177 pm in a haloalkane), not weaker.

The actual reasons for the low reactivity (NCERT) are:
- partial double bond character of C–Cl from resonance;
- the C–Cl carbon is hybridised, which holds the bonding pair more tightly;
- the phenyl cation is not stabilised by resonance, so is ruled out;
- the electron-rich ring repels an approaching electron-rich nucleophile.
Since R says the opposite of reason 1, the answer is (C).
- 131 mark
Question 13
Assertion (A): Aryl halides undergo nucleophilic substitution reactions with ease.
Reason (R): The carbon–halogen bond in aryl halides has partial double bond character.
Solve with AIAnswer
(A) Both A and R are true and R is the correct explanation of A.
(B) Both A and R are true but R is not the correct explanation of A.
(C) A is true but R is false.
- Correct
(D) A is false but R is true.
Option (D) is correct.
Explanation:
Assertion is false. Aryl halides are far less reactive than alkyl halides towards nucleophilic substitution. Chlorobenzene gives phenol only with NaOH at 623 K and 300 atm.
Reason is true. A halogen lone pair is delocalised into the benzene ring, so the C–X bond acquires partial double bond character:

A bond with some double bond character is shorter and stronger and is harder to break. The Reason is therefore true, and it actually explains why aryl halides react with difficulty, which is the opposite of what the Assertion claims.
- 141 mark
Question 14
Assertion (A): Nucleophilic substitution of iodoethane is easier than that of chloroethane.
Reason (R): The bond enthalpy of the C–I bond is less than that of the C–Cl bond.
Solve with AIAnswer
- Correct
(A) Both A and R are true and R is the correct explanation of A.
(B) Both A and R are true but R is not the correct explanation of A.
(C) A is true but R is false.
(D) A is false but R is true.
Option (A) is correct.
Explanation: In nucleophilic substitution the C–X bond must break (in the slow step of both and ). The weaker that bond, the easier the halide leaves.

- Reason is true: C–I bond enthalpy is 234 kJ mol against 351 kJ mol for C–Cl (the C–I bond is longer, 214 pm against 178 pm).
- Assertion is true: for the same alkyl group the reactivity order is , so iodoethane reacts faster than chloroethane.
- R explains A: less energy is needed to break C–I, so iodide is the better leaving group and the substitution is easier.
- 151 mark
Question 15
Assertion (A): Halogens are ortho- and para-directing groups.
Reason (R): Halogens are electron-withdrawing groups.
Solve with AIAnswer
(A) Both A and R are true and R is the correct explanation of A.
- Correct
(B) Both A and R are true but R is not the correct explanation of A.
(C) A is true but R is false.
(D) A is false but R is true.
Option (B) is correct.
Explanation: A halogen on a benzene ring has two opposing effects.
- –I effect (withdrawal): the electronegative halogen pulls electron density out of the ring. This is stronger than the resonance effect, so the ring is deactivated and reacts more slowly than benzene. So R is true.
- +R effect (resonance donation): a halogen lone pair can be shared with the ring. When an electrophile attacks the ortho or para position, one form of the intermediate has the positive charge on the carbon carrying the halogen, and the halogen lone pair can then spread that charge. Attack at the meta position never puts the charge there.

So the orientation (o/p) comes from the resonance effect, while the reactivity (deactivation) comes from the inductive effect. A is true, but withdrawal of electrons (R) does not explain the o/p direction. Electron withdrawal alone would make a group meta-directing, as with .
- 162 marks
Question 16
(i) Which alkyl halide from the following pair is chiral, and which undergoes a faster reaction?

(ii) Out of and , which reaction occurs with:
(a) inversion of configuration
(b) racemisation
Solve with AIWritten solution
(i) The two compounds are (a) 1-bromobutane, , and (b) 2-bromobutane, .

- (b) is chiral. C-2 carries four different groups (H, Br, and ), so it is an asymmetric carbon and the molecule is not superimposable on its mirror image. In (a) no carbon has four different groups.
- (a) reacts faster by . It is a primary halide: the carbon bearing Br carries only one alkyl group, so the nucleophile's backside approach is least hindered. (b) is secondary and more crowded. order: .
(ii) (a) occurs with inversion of configuration: the nucleophile attacks from the side opposite the leaving group in a single step.
(ii) (b) occurs with racemisation: the planar carbocation is attacked from both faces equally, giving a 50 : 50 mixture of the two enantiomers.
- 172 marks
Question 17
(i) Allyl chloride can be distinguished from vinyl chloride by the NaOH and silver nitrate test. Comment.
(ii) An alkyl halide reacts with lithium aluminium hydride to give an alkane. Name the attacking reagent which brings about this change.
Solve with AIWritten solution
(i) In the test, the halide is warmed with aqueous NaOH, acidified with dilute and then treated with . A white precipitate of AgCl forms only if the C–Cl bond has been broken and released.
- Allyl chloride, , has Cl on an carbon. It is hydrolysed easily, because the allyl carbocation it forms is stabilised by resonance:
- Vinyl chloride, , has Cl on an carbon. A chlorine lone pair is delocalised into the C=C bond, so the C–Cl bond has partial double bond character. It is not hydrolysed, no is released, and no precipitate forms.

So a white precipitate identifies allyl chloride; no precipitate identifies vinyl chloride.
(ii) The attacking reagent is the hydride ion, , supplied by . It acts as a nucleophile and replaces the halogen:
- 182 marks
Question 18
Which alkyl halide from the following pair is (i) chiral and (ii) undergoes an reaction faster?
(a)
(b)
Solve with AIWritten solution

(i) (b), 2-bromobutane, is chiral. Its C-2 is bonded to four different groups: H, Br, and . It is an asymmetric carbon, so the molecule is not superimposable on its mirror image. In (a), 2-bromo-2-methylpropane, the central carbon carries three identical groups, so it is achiral.
(ii) (a), , reacts faster by . The slow step of is ionisation to a carbocation:
(a) gives a tertiary carbocation, stabilised by the +I effect and hyperconjugation of three methyl groups. (b) can only give a secondary carbocation, which is less stable and forms more slowly. order: .
- 192 marks
Question 19
Which one of the following compounds is more reactive towards an reaction, and why?
or
Solve with AIWritten solution
(1-chloropropane) is more reactive towards .

- In the nucleophile must reach the carbon bearing the halogen from the back side, and bond formation and bond breaking happen in one step. Bulky groups on that carbon block the approach and raise the energy of the transition state.
- 1-Chloropropane is a primary halide: the C–Cl carbon carries only one alkyl group, so the back side is open.
- (2-iodobutane) is a secondary halide: the C–I carbon carries two alkyl groups, so backside attack is more hindered.
Iodide is the better leaving group (C–I is weaker than C–Cl), which on its own would favour 2-iodobutane. For , however, the steric effect of going from a primary to a secondary carbon is the deciding factor, so the primary chloride reacts faster.
- 201 mark
Question 20
The following haloalkanes are hydrolysed in the presence of aqueous KOH.
(i) 1-Chlorobutane
(ii) 2-Chloro-2-methylpropane
Which of the above is more likely to give a racemic mixture? Justify your answer.
Solve with AIWritten solution
(ii) 2-Chloro-2-methylpropane. It is a tertiary halide and is hydrolysed by the mechanism. The C–Cl bond breaks first to give a planar tertiary carbocation, and can attack it from either face with equal probability. This two-faced attack is the step that produces a racemic mixture when the carbon is chiral.

(i) 1-Chlorobutane is a primary halide and reacts by (backside attack), which gives inversion, not racemisation.
Note: in this particular pair neither carbon is chiral, and the product 2-methylpropan-2-ol, , is itself achiral (three identical groups). So no optical rotation is actually seen. The question tests which mechanism leads to racemisation.
- 212 marks
Question 21
Give reasons for the following:
(a) During the electrophilic substitution reaction of haloarenes, the para-substituted derivative is the major product.
(b) The product formed during an reaction is a racemic mixture.
Solve with AIWritten solution
(a) A halogen lone pair is delocalised into the ring by resonance, and this raises the electron density at the ortho and para positions more than at the meta position. So the electrophile attacks the ortho and para positions.
Of these, the ortho positions sit right next to the bulky halogen atom, so an incoming electrophile meets steric hindrance there. The para position is far from the halogen and unhindered. So the para isomer is the major product and the ortho isomer the minor one.

(b) In an reaction the C–X bond breaks first and forms a carbocation. The carbocation carbon is hybridised and planar. The nucleophile can attack it from the top face or the bottom face with equal probability, giving the two enantiomers (one with retention, one with inversion) in equal amounts. An equimolar mixture of enantiomers is a racemic mixture, and it is optically inactive because the rotations cancel.
- 222 marks
Question 22
(a) Name a suitable alcohol and reagent from which 2-chloro-2-methylpropane can be prepared.
(b) Out of chloromethane and fluoromethane, which one has the higher dipole moment and why?
Solve with AIWritten solution
(a) Alcohol: 2-methylpropan-2-ol (tert-butyl alcohol), . Reagent: concentrated HCl. A tertiary alcohol reacts simply on shaking with conc. HCl at room temperature. Primary and secondary alcohols need anhydrous as a catalyst (Lucas reagent), but a tertiary one does not.

(b) Chloromethane has the higher dipole moment: 1.860 D, compared with 1.847 D for fluoromethane.
Dipole moment = magnitude of separated charge × distance between the charges.
- Fluorine is more electronegative, so the C–F bond has the larger partial charges.
- But fluorine is a very small atom, so the C–F bond is much shorter (139 pm) than the C–Cl bond (178 pm).

The much larger bond length in more than makes up for its smaller charge separation. So ends up with the slightly larger dipole moment.
- 232 marks
Question 23
In which of the two compounds, or , will the C–Cl bond be longer? Why?
Solve with AIWritten solution
The C–Cl bond is longer in (about 177 pm) than in chlorobenzene (about 169 pm). There are two reasons.

1. Hybridisation of the carbon. In 1-chloropropane the carbon bonded to Cl is (25% s-character). In chlorobenzene it is (33% s-character). An orbital with more s-character holds the bonding electrons closer to the nucleus, so the C–Cl bond is shorter.
2. Resonance. In chlorobenzene a lone pair on chlorine is delocalised into the ring. This gives the C–Cl bond partial double bond character, which shortens and strengthens it. No such resonance is possible in 1-chloropropane.

- 242 marks
Question 24
Among all the isomers of molecular formula , identify:
(a) the one isomer which is optically active;
(b) the one isomer which is most reactive towards ;
(c) the two isomers which give the same product on dehydrohalogenation with alcoholic KOH.
Solve with AIWritten solution
has four structural isomers:

(a) 2-Bromobutane, . Its C-2 carries four different groups (H, Br, , ), so it is chiral and optically active. None of the other three has an asymmetric carbon.
(b) 1-Bromobutane, . It is primary and its β-carbon is unbranched, so backside attack meets the least steric hindrance. (1-Bromo-2-methylpropane is also primary, but the branch on its β-carbon crowds the reaction centre and slows .)
(c) 1-Bromo-2-methylpropane, , and 2-bromo-2-methylpropane, . Each loses HBr to give the same alkene, 2-methylpropene, :

The other two isomers do not give this product: 1-bromobutane gives but-1-ene, and 2-bromobutane gives mainly but-2-ene.
- 253 marks
Question 25
Identify A, B, C, D, E and F in the following:
Solve with AIWritten solution
The starting compound is 1-bromo-2-methylpropane, .
Right-hand branch.
- A, 2-methylpropene: dehydrohalogenation.
- B, 2-bromo-2-methylpropane: HBr adds by Markovnikov's rule, since H adds to the end to give the tertiary carbocation.
- C, 2,2,3,3-tetramethylbutane: Wurtz reaction, where two tert-butyl groups couple ().
Left-hand branch.
- D, 2-methylpropylmagnesium bromide: Mg inserts into the C–Br bond, so the carbon skeleton does not change.
- E, 2-methylpropane: the Grignard reagent takes a proton from water, so MgBr is replaced by H (not OH) and is formed.
Downward branch.
- F, 1-ethoxy-2-methylpropane: ethoxide replaces Br at the primary carbon, forming an ether.

- 263 marks
Question 26
How can you convert the following?
(i) But-1-ene to 1-iodobutane
(ii) Benzene to acetophenone
(iii) Ethanol to propanenitrile
Solve with AIWritten solution
(i) But-1-ene → 1-iodobutane. Ordinary HBr would follow Markovnikov's rule and give 2-bromobutane. To put the halogen on C-1, add HBr in the presence of a peroxide (anti-Markovnikov addition), then exchange Br for I by the Finkelstein reaction:
NaBr is insoluble in dry acetone and precipitates, which drives the exchange forward.

(ii) Benzene → acetophenone. Use Friedel–Crafts acylation with acetyl chloride and anhydrous :

(iii) Ethanol → propanenitrile. The chain grows from 2 to 3 carbons, so a carbon must be added. The cyanide ion does this. First replace –OH by –Br using red phosphorus and bromine ( formed in situ), then treat with KCN:
KCN is ionic and attacks through carbon, giving the nitrile (not the isocyanide).

- 273 marks
Question 27
(i) Account for the following:
(a) Electrophilic substitution reactions in haloarenes occur slowly.
(b) Haloalkanes, though polar, are insoluble in water.
(ii) Arrange the following compounds in increasing order of reactivity towards displacement:
2-Bromo-2-methylbutane, 2-Bromopentane, 1-Bromopentane
Solve with AIWritten solution
(i) (a) The halogen is more electronegative than carbon and withdraws electron density from the benzene ring by its –I effect. It also donates a little by resonance (+R), but the inductive withdrawal is stronger. Overall the ring becomes less electron-rich than benzene (it is deactivated), so it attracts electrophiles less strongly. Electrophilic substitution in haloarenes is therefore slower and needs more drastic conditions than in benzene. The resonance effect only decides where the electrophile goes (ortho/para).
(i) (b) To dissolve in water, a haloalkane must break the strong hydrogen bonds between water molecules. A haloalkane cannot form hydrogen bonds with water; it can only form weaker dipole–dipole and van der Waals attractions. The energy released by these new attractions is less than the energy needed to break the original hydrogen bonds, so haloalkanes are only very slightly soluble in water, even though the C–X bond is polar.
(ii) Increasing order of reactivity:

In the nucleophile attacks the C–Br carbon from the back. The more alkyl groups on that carbon, the more the approach is blocked. The tertiary bromide (three alkyl groups) is slowest, the secondary bromide is intermediate, and the primary bromide (one alkyl group) is fastest.
- 283 marks
Question 28
A compound is formed by the substitution of two chlorine atoms for two hydrogen atoms in propane. Write the structures of the possible isomers. Give the IUPAC name of the isomer which can exhibit enantiomerism.
Solve with AIWritten solution
Replacing two H atoms of propane, , by Cl gives four isomers of :
Structure IUPAC name 1,1-dichloropropane 1,2-dichloropropane 1,3-dichloropropane 2,2-dichloropropane 
The isomer that exhibits enantiomerism is 1,2-dichloropropane. Its C-2 is bonded to four different groups: H, Cl, and . This asymmetric carbon makes the molecule chiral, so it exists as a pair of non-superimposable mirror images (enantiomers).

No carbon in the other three isomers carries four different groups: each has two identical H atoms, two identical Cl atoms, or two identical / groups on it.
- 293 marks
Question 29
(i) Out of and , which one is more reactive towards and why?
(ii) Write the product formed when p-nitrochlorobenzene is heated with aqueous NaOH at 443 K, followed by acidification.
(iii) Why are the dextro- and laevo-rotatory isomers of butan-2-ol difficult to separate by fractional distillation?
Solve with AIWritten solution
(i) is more reactive. Both compounds ionise to the same tertiary carbocation, , so carbocation stability does not decide here. The difference is the bond that must break in the slow step. The C–I bond (about 234 kJ mol) is weaker than the C–Br bond (about 293 kJ mol), so is the better leaving group and ionises faster.
(ii) The product is 4-nitrophenol (p-nitrophenol). The – group para to Cl withdraws electron density and stabilises the negatively charged intermediate, so replaces Cl at only 443 K (chlorobenzene itself needs 623 K). In the alkaline solution the phenol is present as its sodium salt, and acidification converts it into free 4-nitrophenol:

(iii) The dextro- and laevo-rotatory forms of butan-2-ol are enantiomers. Enantiomers have identical physical properties (boiling point, melting point, density, refractive index). They differ only in the direction in which they rotate plane-polarised light. Fractional distillation separates liquids by their different boiling points, and these two have exactly the same boiling point, so they cannot be separated this way.
- 303 marks
Question 30
Write the product(s) formed when:
(i) 2-Bromopropane undergoes a dehydrohalogenation reaction.
(ii) Chlorobenzene undergoes a nitration reaction.
(iii) Methyl bromide is treated with KCN.
Solve with AIWritten solution
(i) With alcoholic KOH, H is removed from a β-carbon (C-1 or C-3, which are equivalent) and Br from C-2. The product is propene:

(ii) With the nitrating mixture (conc. + conc. ), the o,p-directing Cl sends to the ortho and para positions. The products are 1-chloro-4-nitrobenzene (major) and 1-chloro-2-nitrobenzene (minor). Para is major because the ortho positions are sterically crowded by Cl.

(iii) from ionic KCN attacks through carbon and replaces (). The product is ethanenitrile (methyl cyanide, acetonitrile):

- 314 marks
Question 31
(i) Consider the reaction between 1-bromopropane and iodide ion:
The reaction is carried out in propanone (acetone) as solvent. The rate law is found to be: Rate .
Which mechanism does this reaction follow, or ? Justify your answer.
(ii) What will be the rate equation for the reaction of with ? Justify.
Solve with AIWritten solution
(i) .
- The rate depends on the concentrations of both the haloalkane and (second-order overall). So both species must be present in the rate-determining step.
- That fits the one-step mechanism: attacks the carbon from the side opposite Br, and the C–I bond forms as the C–Br bond breaks, through a single transition state.
- 1-Bromopropane is a primary halide with little steric hindrance, which favours .

(ii) Rate . It is first order in the halide and does not depend on .
2-Bromo-2-methylpropane is a tertiary halide. It is too crowded for backside attack, but it ionises easily to a stable tertiary carbocation, so it reacts by in two steps:

The overall rate is set by the slow step I. Only the haloalkane takes part in it, so only its concentration appears in the rate law. reacts in the fast step II, so changing does not change the rate.
- 324 marks
Question 32
But-1-ene undergoes an electrophilic addition reaction with HBr.
(i) Write the names of all the products formed in the reaction.
(ii) Which will be the major product formed, and why?
Solve with AIWritten solution
(i) Two products are formed: 2-bromobutane, , and 1-bromobutane, .
(ii) 2-Bromobutane is the major product. The addition goes in two steps, and the choice is made in the first:
- Step 1: from HBr adds to one carbon of the double bond, leaving a carbocation on the other.
- H on C-1 gives , a secondary carbocation.
- H on C-2 gives , a primary carbocation.
- The secondary carbocation is more stable: two alkyl groups release electrons to it by the +I effect and hyperconjugation. So it forms faster and most of the reaction goes this way.
- Step 2: bonds to the positive carbon. The secondary carbocation gives 2-bromobutane (major) and the primary one gives 1-bromobutane (minor).

This is Markovnikov's rule: the H of HBr goes to the double-bond carbon that already has more hydrogens. Because the planar carbocation is attacked by from both faces equally, 2-bromobutane (which is chiral) is obtained as a racemic mixture.
- Step 1: from HBr adds to one carbon of the double bond, leaving a carbocation on the other.
- 334 marks
Question 33
The figure below shows two competing routes when a haloalkane reacts with water in the presence of ethanol at 65 °C. The product of each route is shown.

(i) Explain the mechanism of both these reactions.
(ii) Which of the two reactions will predominate? Give reasons.
Solve with AIWritten solution
The haloalkane is 2-chloro-2-methylpropane, , a tertiary halide. Route 1 gives 2-methylpropan-2-ol, (substitution). Route 2 gives 2-methylpropene, (elimination).
(i) Both routes start with the same slow step, because a tertiary halide is too crowded for backside () attack but ionises easily in a polar protic solvent such as water/ethanol:
The planar tertiary carbocation then reacts in one of two fast ways:
- Route 1, substitution (): a water molecule uses a lone pair on O to bond to the positive carbon, and the resulting ion loses :
- Route 2, elimination: instead of bonding to carbon, a solvent molecule removes an from a β-carbon (one of the groups), and the C–H electron pair becomes the new C=C bond:

(ii) Route 1 (substitution) predominates, so 2-methylpropan-2-ol is the major product.
- Water and ethanol are weak bases but reasonable nucleophiles, and they are present in large excess around the carbocation. Bonding to the positive carbon is therefore the more frequent outcome.
- Elimination becomes the main route only with a strong base, such as alcoholic KOH, and at higher temperature. Neither is present here.
So under these mild, neutral solvolysis conditions substitution gives the major product and elimination the minor one.
- 345 marks
Question 34
Answer the following:
(a) Which isomer of gives a single monochloro compound, , in bright sunlight?
(b) Arrange the following compounds in increasing order of reactivity towards an reaction:
2-Bromopentane, 1-Bromopentane, 2-Bromo-2-methylbutane
(c) Why does p-dichlorobenzene have a higher melting point than the ortho- and meta-isomers?
(d) Identify A and B in the following:
Solve with AIWritten solution
(a) Cyclopentane. () is either an alkene or a cycloalkane. Substitution in bright sunlight (free-radical chlorination) is typical of a saturated hydrocarbon, so it is a cycloalkane. To give only one monochloro product, all ten hydrogen atoms must be equivalent. That is true only in cyclopentane, which gives chlorocyclopentane:

(b) Increasing order of reactivity:
needs backside attack on the C–Br carbon. Each extra alkyl group on that carbon adds steric hindrance, so the tertiary bromide is slowest and the primary bromide is fastest.
(c) p-Dichlorobenzene is a symmetrical molecule. Its molecules fit closely and regularly into the crystal lattice, so the intermolecular forces in the solid are stronger and more energy is needed to melt it. The ortho- and meta-isomers are less symmetrical and pack less efficiently, so they melt at lower temperatures.
(d) The substrate is bromocyclobutane. Magnesium in dry ether inserts into the C–Br bond to give the Grignard reagent A = cyclobutylmagnesium bromide. Water then protonates the carbanion-like carbon, replacing MgBr by H, to give the hydrocarbon B = cyclobutane:

- 355 marks
Question 35
Three sets of pairs, (i) and (ii), of reactions are given below. For each set, state which reaction, (i) or (ii), is expected to be slower. Justify your answer.
(a)
(i)
(ii) the same reaction with the concentration of ethanol doubled
(b)
(i)
(ii)
(c)
(i)
(ii)
Solve with AIWritten solution
(a) Neither is slower: both go at the same rate. In an reaction the slow step is ionisation of the haloalkane, . The nucleophile (ethanol) only reacts afterwards, in the fast step. The rate law is rate , so doubling [ethanol] does not change the rate.
(b) Reaction (i) is slower. Both form the same tertiary carbocation, so the difference lies in the bond broken in the slow step. The C–Cl bond is stronger than the C–Br bond, so is the poorer leaving group and ionises more slowly than .
(c) Reaction (ii) is much slower. It does not occur under these conditions at all.
- An reaction needs a stable carbocation. gives a tertiary carbocation stabilised by three methyl groups. would have to give a phenyl cation. Its empty orbital is an orbital in the plane of the ring, so it cannot be stabilised by resonance, and it is not formed.
- The C–Cl bond in chlorobenzene also has partial double bond character (resonance with the ring) and is attached to an carbon, so it is shorter and stronger and harder to break.

- 365 marks
Question 36
Read the passage and answer the questions that follow.
Nucleophilic substitution reactions of haloalkanes can proceed by both the and the mechanisms. Which mechanism operates depends on factors such as the structure of the haloalkane, the nature of the leaving group, the nucleophilic reagent and the solvent.
(i) The mechanism is favoured in which of the following solvents? [1]
(A) benzene (B) carbon tetrachloride (C) acetic acid (D) carbon disulphide
(ii) Nucleophilic substitution will be fastest in the case of: [1]
(A) 1-chloro-2,2-dimethylpropane (B) 1-iodo-2,2-dimethylpropane (C) 1-bromo-2,2-dimethylpropane (D) 1-fluoro-2,2-dimethylpropane
(iii) An reaction will be fastest in which of the following solvents? [1]
(A) acetone (dielectric constant 21) (B) ethanol (dielectric constant 24) (C) methanol (dielectric constant 32) (D) chloroform (dielectric constant 5)
(iv) Polar solvents make the reaction faster because they: [1]
(A) destabilise the transition state and decrease the activation energy (B) destabilise the transition state and increase the activation energy (C) stabilise the transition state and increase the activation energy (D) stabilise the transition state and decrease the activation energy
(v) An reaction will be fastest in the case of: [1]
(A) 1-chloro-2-methylpropane (B) 1-iodo-2-methylpropane (C) 1-chlorobutane (D) 1-iodobutane
Solve with AIWritten solution
(i) — (C). reactions are carried out in polar protic solvents (water, alcohols, acetic acid). The solvent's polar O–H groups solvate and stabilise the carbocation and the leaving halide ion, and that supplies the energy needed to break the C–X bond. Benzene, and are non-polar and cannot do this.
(ii) — (B). All four have the same carbon skeleton, so only the leaving group differs. The C–X bond enthalpy falls in the order C–F > C–Cl > C–Br > C–I, so the ease of substitution is R–I > R–Br > R–Cl > R–F. The iodide reacts fastest.
(iii) — (C). A higher dielectric constant means a more polar solvent, which better stabilises the ions formed in the slow ionisation step. Methanol (32) is the most polar and is also protic, so is fastest in it. Chloroform (5) is the least suitable.

(iv) — (D). In the slow step charge separates as the C–X bond breaks (). A polar solvent stabilises this charge-separated transition state more than the neutral reactant. This lowers the activation energy, and the reaction speeds up.
(v) — (B). The iodides (B, D) react faster than the chlorides (A, C) because C–I is the weakest bond, so leaves most easily in the rate-determining ionisation. Of the two iodides, in 1-iodo-2-methylpropane the carbon next to the reaction centre carries two alkyl groups (two ), while in 1-iodobutane it carries only one (). This gives more electron release (+I) towards the developing positive charge, so (B) ionises faster than (D).
- 375 marks
Question 37
Read the passage and answer the questions that follow.
Objects which are non-superimposable on their mirror images (like a pair of hands) are said to be chiral, and this property is known as chirality. Chiral molecules are optically active, while objects which are superimposable on their mirror images are called achiral; such molecules are optically inactive. This test of molecular chirality can be applied to organic molecules by constructing models and their mirror images, or by drawing three-dimensional structures and attempting to superimpose them in our minds. There are other aids, however, that can help us recognise chiral molecules. One such aid is the presence of a single asymmetric carbon atom.
(a) What are enantiomers? [1]
(b) Why does a racemic mixture containing two enantiomers in equal proportions have zero optical rotation? [2]
(c) Why is butan-2-ol a chiral molecule? [1]
(d) Why is propan-2-ol an achiral molecule? [1]
Solve with AIWritten solution
(a) Enantiomers are stereoisomers that are non-superimposable mirror images of each other, like a left and a right hand. They have identical physical properties (melting point, boiling point, refractive index) and differ only in the direction in which they rotate plane-polarised light: one is dextrorotatory (+) and the other laevorotatory (–), by the same amount.
(b) In a racemic mixture the two enantiomers are present in equal amounts. The (+) form rotates plane-polarised light to the right, and the (–) form rotates it to the left by exactly the same angle. Because there are equal numbers of each, the rotation caused by one enantiomer is cancelled by the opposite rotation of the other. The net optical rotation is zero, so the mixture is optically inactive. It is written with the prefix dl or (±).
(c) In butan-2-ol, , C-2 is attached to four different groups: H, OH, and . It is an asymmetric carbon, so the molecule and its mirror image cannot be superimposed. Butan-2-ol is therefore chiral.

(d) In propan-2-ol, , C-2 carries H, OH and two identical groups. With two identical groups it is not an asymmetric carbon. The molecule is superimposable on its mirror image, so it is achiral and optically inactive.
