Confirming your payment

Skip to content

Opening your dashboard

Class 12 Physics Chapter 12: Semiconductor Electronics, Devices And Circuits Solutions

6 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 12, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 12 solutions

6 questions with solutions

1–2 marks · Mixed difficulty

  1. 1

    Question 1

    In an nn-type silicon, which of the following statements is true?

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) Electrons are majority carriers and trivalent atoms are the dopants.

    • (B) Electrons are minority carriers and pentavalent atoms are the dopants.

    • (C) Holes are minority carriers and pentavalent atoms are the dopants.

      Correct
    • (D) Holes are majority carriers and trivalent atoms are the dopants.

    Option (C) is correct.

    Explanation: nn-type silicon is made by doping silicon with a pentavalent impurity such as phosphorus, arsenic or antimony. Each dopant atom uses four of its electrons in bonds and donates the fifth as a free electron, so electrons are the majority carriers and holes are the minority carriers.

    Option (A) has the wrong dopant (trivalent atoms give pp-type), (B) has the wrong majority carrier, and (D) describes a pp-type semiconductor.

  2. 2

    Question 2

    Which of the following statements (given in Exercise 14.1) is true for pp-type semiconductors?

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) Electrons are majority carriers and trivalent atoms are the dopants.

    • (B) Electrons are minority carriers and pentavalent atoms are the dopants.

    • (C) Holes are minority carriers and pentavalent atoms are the dopants.

    • (D) Holes are majority carriers and trivalent atoms are the dopants.

      Correct

    Option (D) is correct.

    Explanation: pp-type silicon is made by doping with a trivalent impurity such as boron, aluminium or indium. Each dopant atom can form only three bonds, leaving a hole in the fourth, so holes are the majority carriers and electrons are the minority carriers.

    Options (B) and (C) name pentavalent dopants, which give nn-type material, and (A) has electrons as the majority carriers, which is also nn-type behaviour.

  3. 3

    Question 3

    Carbon, silicon and germanium have four valence electrons each. These are characterised by valence and conduction bands separated by energy band gaps respectively equal to (Eg)C(E_g)_{\text{C}}, (Eg)Si(E_g)_{\text{Si}} and (Eg)Ge(E_g)_{\text{Ge}}. Which of the following statements is true?

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) (Eg)Si<(Eg)Ge<(Eg)C(E_g)_{\text{Si}} < (E_g)_{\text{Ge}} < (E_g)_{\text{C}}

    • (B) (Eg)C<(Eg)Ge>(Eg)Si(E_g)_{\text{C}} < (E_g)_{\text{Ge}} > (E_g)_{\text{Si}}

    • (C) (Eg)C>(Eg)Si>(Eg)Ge(E_g)_{\text{C}} > (E_g)_{\text{Si}} > (E_g)_{\text{Ge}}

      Correct
    • (D) (Eg)C=(Eg)Si=(Eg)Ge(E_g)_{\text{C}} = (E_g)_{\text{Si}} = (E_g)_{\text{Ge}}

    Option (C) is correct.

    Explanation: The four valence electrons of C, Si and Ge are in the second, third and fourth orbits respectively. The farther out the valence electrons are, the less tightly they are held, so the energy gap decreases from C to Si to Ge. The actual values are

    (Eg)C=5.4 eV>(Eg)Si=1.1 eV>(Eg)Ge=0.7 eV(E_g)_{\text{C}} = 5.4\ \text{eV} > (E_g)_{\text{Si}} = 1.1\ \text{eV} > (E_g)_{\text{Ge}} = 0.7\ \text{eV}

    This is why carbon (diamond) is an insulator while silicon and germanium are semiconductors. Options (A) and (B) put the gaps in the wrong order, and (D) makes them equal.

  4. 4

    Question 4

    In an unbiased pp-nn junction, holes diffuse from the pp-region to the nn-region because

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) free electrons in the nn-region attract them.

    • (B) they move across the junction by the potential difference.

    • (C) hole concentration in the pp-region is more as compared to the nn-region.

      Correct
    • (D) all the above.

    Option (C) is correct.

    Explanation: Diffusion is the movement of particles from a region of higher concentration to one of lower concentration. The pp-region has many more holes than the nn-region, so holes diffuse from pp to nn.

    The attraction of free electrons (A) is not the cause: each region is electrically neutral as a whole, so the n-region exerts no net pull on the holes; diffusion is driven by the concentration difference. The potential difference across the junction (B) does the opposite: it opposes the diffusion of holes and drives the drift current. So (D) is also wrong.

  5. 5

    Question 5

    When a forward bias is applied to a pp-nn junction, it

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) raises the potential barrier.

    • (B) reduces the majority carrier current to zero.

    • (C) lowers the potential barrier.

      Correct
    • (D) none of the above.

    Option (C) is correct.

    Explanation: In forward bias the pp-side is connected to the positive terminal and the nn-side to the negative terminal. The applied voltage VV is opposite in direction to the barrier potential V0V_0, so the effective barrier height becomes

    V0−VV_0 - V

    The barrier is lowered and the depletion layer becomes narrower. More majority carriers can now cross the junction, so the majority-carrier current increases rather than falling to zero (B). Raising the barrier (A) is what reverse bias does, and since (C) is correct, (D) is wrong.

  6. 6

    Question 6

    In half-wave rectification, what is the output frequency if the input frequency is 50 Hz? What is the output frequency of a full-wave rectifier for the same input frequency?

    Easy
    2 marks
    Solve with AI
    Written solution

    Half-wave rectifier: the diode conducts only in one half of each input cycle, so there is one output pulse per input cycle. The output repeats itself once every input cycle:

    fout=fin=50 Hzf_{\text{out}} = f_{\text{in}} = 50\ \text{Hz}

    Full-wave rectifier: both halves of each input cycle give a pulse in the same direction, so there are two output pulses per input cycle:

    fout=2fin=2×50=100 Hzf_{\text{out}} = 2f_{\text{in}} = 2\times50 = 100\ \text{Hz}

    Class 12 Physics Semiconductor Electronics, Devices And Circuits

    In the figure each input cycle produces two identical output pulses, which is why the full-wave output frequency is doubled.

Inside Ch 12

What Class 12 Physics Ch 12 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Classification Of Metals ,Conductors And Semiconductors.
  2. 02Intrinsic Semiconductors And Extrinsic Semiconductors
  3. 03p-n Junction
  4. 04Semi-Conductor Diode
  5. 05Application Of Junction Diode As Rectifier
From the board papers

Ch 12 in past CBSE papers

The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.

  1. 1

    Board paper question 1

    During the formation of a pp-nn junction,

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) diffusion current keeps increasing.

    • (B) drift current remains constant.

    • (C) both the diffusion current and drift current remain constant.

    • (D) diffusion current remains almost constant but drift current increases till both currents become equal.

      Correct

    Option (D) is correct.

    Explanation: When the junction is first formed, electrons diffuse from the nn-side to the pp-side and holes from the pp-side to the nn-side because of the concentration difference, so the diffusion current is large while the drift current is small.

    Each carrier that crosses leaves behind an immobile ion, so layers of positive ions (on the nn-side) and negative ions (on the pp-side) build up. Their electric field, directed from nn to pp, grows as more charge is uncovered, and it drives an increasing drift current in the opposite direction. The process stops when the drift current becomes equal to the diffusion current, and the junction is then in equilibrium.

    The diffusion current does not keep increasing (A), and the drift current does not stay constant (B, C): it is the drift current that grows until the two balance.

  2. 2

    Board paper question 2

    The energy required by an electron to jump the forbidden band in silicon at room temperature is about

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) 0.01 eV

    • (B) 0.05 eV

    • (C) 0.7 eV

    • (D) 1.1 eV

      Correct

    Option (D) is correct.

    Explanation: To jump the forbidden band an electron must go from the top of the valence band to the bottom of the conduction band, so it needs at least the energy gap EgE_g. For silicon at room temperature

    Eg≈1.1 eVE_g \approx 1.1\ \text{eV}

    The other values belong to different processes: about 0.05 eV (B) is the energy needed to free the extra electron of a donor atom in silicon, about 0.01 eV (A) is the same energy in germanium, and 0.7 eV (C) is the energy gap of germanium.

  3. 3

    Board paper question 3

    In an extrinsic semiconductor, the number density of holes is 4×1020 m−34\times10^{20}\ \text{m}^{-3}. If the number density of intrinsic carriers is 1.2×1015 m−31.2\times10^{15}\ \text{m}^{-3}, the number density of electrons in it is

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 1.8×109 m−31.8\times10^{9}\ \text{m}^{-3}

    • (B) 2.4×1010 m−32.4\times10^{10}\ \text{m}^{-3}

    • (C) 3.6×109 m−33.6\times10^{9}\ \text{m}^{-3}

      Correct
    • (D) 3.2×1010 m−33.2\times10^{10}\ \text{m}^{-3}

    Option (C) is correct.

    Explanation: In thermal equilibrium the electron and hole concentrations satisfy

    nenh=ni2n_e n_h = n_i^2

    So

    ne=ni2nh=(1.2×1015)24×1020=1.44×10304×1020=3.6×109 m−3n_e = \frac{n_i^2}{n_h} = \frac{(1.2\times10^{15})^2}{4\times10^{20}} = \frac{1.44\times10^{30}}{4\times10^{20}} = 3.6\times10^{9}\ \text{m}^{-3}

    The semiconductor is pp-type: holes are the majority carriers and electrons are far fewer than even the intrinsic value. Option (A) halves the correct value and (B) and (D) do not follow from ni2/nhn_i^2/n_h.

  4. 4

    Board paper question 4

    The formation of depletion region in a pp-nn junction diode is due to

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) movement of dopant atoms

    • (B) diffusion of both electrons and holes

      Correct
    • (C) drift of electrons only

    • (D) drift of holes only

    Option (B) is correct.

    Explanation: The electron concentration is higher on the nn-side, so electrons diffuse from nn to pp; the hole concentration is higher on the pp-side, so holes diffuse from pp to nn. Each diffusing electron leaves behind a positive donor ion on the nn-side, and each diffusing hole leaves behind a negative acceptor ion on the pp-side. These immobile ions near the junction form a region with no free carriers: the depletion region.

    The dopant atoms themselves are fixed in the lattice and do not move (A). Drift (C, D) is caused by the field of the depletion region after it has formed; it opposes the diffusion, it does not create the region.

  5. 5

    Board paper question 5

    A semiconductor device is connected in series with a battery, an ammeter and a resistor. A current flows in the circuit. If the polarity of the battery is reversed, the current in the circuit almost becomes zero. The device is

    MCQHardAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) intrinsic semiconductor

    • (B) pp-type semiconductor

    • (C) nn-type semiconductor

    • (D) pp-nn junction diode

      Correct

    Option (D) is correct.

    Explanation: The device conducts for one polarity and practically stops conducting when the polarity is reversed, so its resistance depends on the direction of the applied voltage. That is the behaviour of a pp-nn junction diode: in forward bias the barrier is lowered and a current of the order of mA flows; in reverse bias the barrier is raised and only a tiny current of the order of µA flows.

    A piece of intrinsic, pp-type or nn-type semiconductor (A, B, C) behaves like an ordinary resistor: the same current flows whichever way the battery is connected.

  6. 6

    Board paper question 6

    In an unbiased pp-nn junction at equilibrium, which of the following statements is true about diffusion current and drift current?

    MCQHardAsked 2018
    1 mark
    Solve with AI
    Answer
    • (A) Diffusion current is equal to drift current

      Correct
    • (B) Drift current exists while diffusion current is zero

    • (C) Diffusion current exists while drift current is zero

    • (D) Neither drift current nor diffusion current exists

    Option (A) is correct.

    Explanation: Both currents flow in an unbiased junction. Carriers still diffuse across because of the concentration difference, and the field of the depletion region still sweeps carriers back. At equilibrium the two currents are equal in magnitude and opposite in direction, so the net current through the junction is zero.

    Options (B), (C) and (D) switch one or both currents off, but equilibrium is a balance between two currents that are both present, not the absence of current.

All 37 board paper questions for this chapter, solved the same way.

Common questions

Class 12 Physics Ch 12 questions students ask

How many questions are there in Class 12 Physics Ch 12?

6 questions. Every one is solved step by step on this page.

Are these Class 12 Physics solutions free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 12 Physics Ch 12 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.