Option (D) is correct.
Explanation: Convert each load to a stress with A=25 mm2=2.5×10−5 m2, and each extension to a strain by dividing by the gauge length, 50 mm.
At the end of the proportional part:
σ=2.5×10−54.5×103=1.8×108 N m−2,ε=500.045=9.0×10−4
Young's modulus is the slope of the straight part:
Y=εσ=9.0×10−41.8×108=2.0×1011 N m−2
The ultimate tensile strength is the largest stress the specimen sustains:
σu=2.5×10−59.5×103=3.8×108 N m−2
After this, the specimen stretches further under a smaller load and breaks at 3.2×108 N m−2, at a strain of 7.0/50=0.14. The ultimate strength and fracture points are far apart, so the metal is ductile.
(B) is wrong: 3.2×108 N m−2 is the stress at fracture, which is less than the largest stress reached.
(C) is wrong: it divides the stress by the extension in millimetres (0.045) instead of by the strain, 0.045/50.
(A) is wrong: it uses the fracture point, which lies far outside the linear region, to find Y (3.2×108/0.14), and takes the fracture stress as the ultimate strength.