(i)
p=hρg=5000×1030×9.8=5.05×107 N m−2
p=5.05×107 N m−2, about 500 times atmospheric pressure.
(ii) From B=−ΔV/Vp,
V∣ΔV∣=Bp=160×1095.05×107=3.15×10−4
∣ΔV∣=3.15×10−4×1.0 m3=3.15×10−4 m3
Fractional change in volume =3.15×10−4 (0.0315%); the volume decreases by 315 cm3.
(iii) For a sphere, V=34πR3. If R changes to R+ΔR with ΔR≪R,
V+ΔV=34πR3(1+RΔR)3≈V(1+R3ΔR)⇒VΔV≈3RΔR
So
R∣ΔR∣=31×3.15×10−4=1.05×10−4
The radius of a sphere of volume 1.0 m3 is R=(4π3V)1/3=0.620 m, so
∣ΔR∣=1.05×10−4×0.620=6.5×10−5 m
The radius decreases by about 0.065 mm, far too little to see. The sphere keeps its shape exactly, because the pressure acts equally and normally at every point of its surface.
(iv) A volume strain of 0.05% means V∣ΔV∣=5.0×10−4, which needs a pressure
p=BV∣ΔV∣=160×109×5.0×10−4=8.0×107 N m−2
h=ρgp=1030×9.88.0×107=7.93×103 m
The sphere loses 0.05% of its volume at a depth of about 7.93 km.
(v) At the same pressure, V∣ΔV∣=Bp, so the volume strain is inversely proportional to the bulk modulus:
(ΔV/V)steel(ΔV/V)Al=BAlBsteel=72160=2.22
(V∣ΔV∣)Al=72×1095.05×107=7.01×10−4
An aluminium sphere would shrink 2.22 times as much, by 7.01×10−4 (0.070%) of its volume at 5000 m. Steel, with the larger bulk modulus, is the less compressible material.