(a) The rod stays horizontal only if both ends move down by the same amount, so the two wires must have equal extensions. For each wire, ΔL=AYTL. Since L and A are the same for both wires, equal extensions require
YsTs=YbTb⇒TbTs=YbYs
So the stiffer wire must carry the larger tension, in proportion to its Young's modulus.
(b) TbTs=1.0×10112.0×1011=2, and for the rod's vertical equilibrium Ts+Tb=300 N. So
Ts=200 N,Tb=100 N
Steel wire: 200 N; brass wire: 100 N.
(c) The rod is also in rotational equilibrium. Taking moments about the point where the steel wire is attached (the steel wire's tension has no moment about this point):
300×x=Tb×1.0=100×1.0⇒x=31 m
The load hangs 0.33 m (one-third of the rod) from the steel wire, nearer the stiffer wire, which is why the steel wire carries more of the load.
(d) With A=2.0×10−6 m2:
σs=2.0×10−6200=1.0×108 N m−2,σb=2.0×10−6100=5.0×107 N m−2
ΔL=YsσsL=2.0×10111.0×108×2.0=1.0×10−3 m
Stresses: steel 1.0×108 N m−2, brass 5.0×107 N m−2; both wires stretch by 1.0 mm. (Check for brass: 1.0×10115.0×107×2.0=1.0×10−3 m, the same, as it must be.)