(i) The two vertical cables share the weight equally:
T=2mg=260×9.8=294 N
The area of each cable is A=πr2=π×(1.0×10−3)2=3.14×10−6 m2, so
σ=AT=3.14×10−6294=9.36×107 N m−2
T=294 N in each cable; stress =9.36×107 N m−2.
(ii)
ε=Yσ=2.0×10119.36×107=4.68×10−4
ΔL=εL=4.68×10−4×3.0=1.40×10−3 m
Strain =4.68×10−4; each cable stretches by 1.40 mm.
(iii) The energy stored in a stretched wire is U=21FΔL (the force grows steadily from zero to F as the wire stretches). For each cable,
U=21×294×1.40×10−3=0.206 J
Total energy stored in the two cables =2×0.206=0.413 J.
(iv) Now one cable carries the whole weight, 588 N, so the stress and the strain are both doubled:
σ′=3.14×10−6588=1.87×108 N m−2,ΔL′=Yσ′L=2.0×10111.87×108×3.0=2.81×10−3 m
Stress =1.87×108 N m−2, extension =2.81 mm. This is below the yield strength of 2.5×108 N m−2, so the cable stays elastic and returns to its original length. But it is already about three-quarters of the yield strength, too close for comfort in a sport where sudden jerks increase the tension further.
(v) The tension, the area and so the stress (9.36×107 N m−2) are unchanged; only Young's modulus changes. The extension is inversely proportional to Y:
ΔLAl=ΔLsteel×YAlYsteel=1.40×70200=4.0 mm
Each aluminium cable would stretch by about 4.0 mm. But the stress, 9.36×107 N m−2, is already 98.5% of aluminium's yield strength (95×106 N m−2), and when she hangs from one ring it would double to 1.87×108 N m−2, beyond aluminium's ultimate strength of 110×106 N m−2. Aluminium cables of this size would stretch permanently and could snap, so aluminium is not a sensible choice.