Confirming your payment

Skip to content

Opening your dashboard

Class 11 Physics Chapter 5 Work Energy Power: Competency-Based Questions (CBQ)

80 questions on Chapter 5, each worked through on its own page with the AI tutor. Class 11 Physics, CBSE 2026-27.

80 questions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    A trolley is guided along a straight track while a rope pulls on it with a constant force F⃗=(a i^+2 j^−3 k^) N\vec{F} = (a\,\hat{i} + 2\,\hat{j} - 3\,\hat{k})\ \text{N}. During the motion the trolley undergoes a displacement d⃗=(4 i^+a j^+2 k^) m\vec{d} = (4\,\hat{i} + a\,\hat{j} + 2\,\hat{k})\ \text{m}. A sensor shows that the rope does no work on the trolley over this displacement. What is the value of aa?

    MCQMedium
    1 mark
  2. 2

    Question 2

    The wind exerts a steady force F⃗=(3 i^+4 j^) N\vec{F} = (3\,\hat{i} + 4\,\hat{j})\ \text{N} on a small sailboat, but the keel keeps the boat moving along the direction of the vector i^+j^\hat{i} + \hat{j}. Only the component of the wind force along the direction of motion does work on the boat. What is this component?

    MCQMedium
    1 mark
  3. 3

    Question 3

    A 2.5 kg block is released from rest on a smooth incline and slides 6 m down along it, as shown. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Class 11 Physics Work Energy Power

    Consider these statements about the 6 m of motion:

    I. The work done on the block by gravity is +75 J.

    II. The work done on the block by the normal force of the incline is −75 J.

    III. The kinetic energy of the block at the end of the 6 m is 75 J.

    IV. The work done by gravity is 150 J, because the 25 N weight acts through a distance of 6 m.

    Which statements are correct?

    MCQMedium
    1 mark
  4. 4

    Question 4

    In a school experiment, a 1 kg puck is given a speed of 8 m s−18\ \text{m s}^{-1} on a rough level floor. It slides in a straight line and comes to rest after travelling 16 m. Assuming the friction force is constant, what are the friction force on the puck and the coefficient of kinetic friction between the puck and the floor? (g=10 m s−2g = 10\ \text{m s}^{-2})

    MCQMedium
    1 mark
  5. 5

    Question 5

    A motorised winch drags a crate along a level floor. Because of the way its cable winds on the drum, the pull of the cable on the crate increases with the distance xx moved as F=(4+2x) NF = (4 + 2x)\ \text{N}, with xx in metres, and it always acts along the motion. How much work does the cable do on the crate as it moves from x=0x = 0 to x=3 mx = 3\ \text{m}?

    MCQMedium
    1 mark
  6. 6

    Question 6

    In a laboratory, a 2 kg cart is moving with a kinetic energy of 100 J. A second cart of mass 0.5 kg is set moving so that it has exactly the same momentum as the first cart. What is the kinetic energy of the second cart?

    MCQMedium
    1 mark
  7. 7

    Question 7

    A shopkeeper carries a 2 kg jar from the floor of his shop to a shelf 3 m above the floor by walking up a winding staircase; the jar travels 10 m along the staircase. On another day he lifts an identical jar straight up to the same shelf using a ladder. What is the work done by gravity on the jar in the two cases, respectively? (g=10 m s−2g = 10\ \text{m s}^{-2})

    MCQMedium
    1 mark
  8. 8

    Question 8

    The bob of a simple pendulum of length 1.0 m is pulled aside until the string makes an angle of 60∘60^\circ with the vertical, and then released from rest, as shown. Air resistance is negligible. What is the speed of the bob as it passes through the lowest point? (g=10 m s−2g = 10\ \text{m s}^{-2})

    Class 11 Physics Work Energy Power

    MCQMedium
    1 mark
  9. 9

    Question 9

    A child starts from rest at the top of a curved water slide, 5.0 m above the ground, and slides down to a level platform 1.8 m above the ground, as shown. The slide is effectively frictionless. What is the child's speed on reaching the platform? (g=10 m s−2g = 10\ \text{m s}^{-2})

    Class 11 Physics Work Energy Power

    MCQMedium
    1 mark
  10. 10

    Question 10

    A 0.4 kg glider rests on a smooth horizontal air track, attached to a spring of spring constant 40 N m−140\ \text{N m}^{-1} whose other end is fixed. The glider is pulled 10 cm from its equilibrium position and released from rest. What is the greatest speed the glider reaches?

    MCQMedium
    1 mark
  11. 11

    Question 11

    A construction crane lifts a 500 kg load of bricks through a height of 12 m in 20 s at a constant speed. The crane's motor is 60% efficient: only 60% of the power it draws is delivered as useful mechanical power to the load. What power does the motor draw? (g=10 m s−2g = 10\ \text{m s}^{-2})

    MCQMedium
    1 mark
  12. 12

    Question 12

    A constant horizontal force of 5 N acts on a 2 kg cart that starts from rest on a smooth level track. What are the instantaneous power delivered by the force at t=4 st = 4\ \text{s}, and the average power delivered over the first 4 s, respectively?

    MCQMedium
    1 mark
  13. 13

    Question 13

    Two model cars on a straight smooth track move towards each other: a 3 kg car at 4 m s−14\ \text{m s}^{-1} and a 2 kg car at 1 m s−11\ \text{m s}^{-1}. Magnets on their bumpers make them stick together on impact. What are the speed of the pair just after the collision and the kinetic energy lost in the collision?

    MCQMedium
    1 mark
  14. 14

    Question 14

    On a smooth air track, a 2 kg glider moving at 3 m s−13\ \text{m s}^{-1} collides head-on with a 1 kg glider at rest. Four students predict the velocities (v1,v2)(v_1, v_2) of the 2 kg and 1 kg gliders after the collision, all in the original direction of motion. Which prediction is impossible?

    MCQMedium
    1 mark
  15. 15

    Question 15

    On a smooth icy surface, a 3 kg puck moving east at 3 m s−13\ \text{m s}^{-1} and a 1 kg puck moving north at 12 m s−112\ \text{m s}^{-1} collide at point O and stick together, as shown. What is the velocity of the combined pucks just after the collision?

    Class 11 Physics Work Energy Power

    MCQMedium
    1 mark
  16. 16

    Question 16

    A worker pushes a 4 kg crate up a ramp 5 m long that rises 1 m. His push is along the ramp, and a friction force of 20 N acts on the crate throughout. The crate's speed rises from 2 m s−12\ \text{m s}^{-1} at the bottom to 6 m s−16\ \text{m s}^{-1} at the top. Assuming a constant push, what is its size? (g=10 m s−2g = 10\ \text{m s}^{-2})

    MCQMedium
    1 mark
  17. 17

    Question 17

    Four energy readings are taken from different sources: a household meter, a food label, a particle-physics report and an old textbook. Which of these is the largest amount of energy? (1 cal = 4.186 J, 1 eV = 1.6×10−191.6 \times 10^{-19} J, 1 erg = 10−710^{-7} J)

    MCQMedium
    1 mark
  18. 18

    Question 18

    A 0.2 kg block is released from rest at the top of a smooth track shaped as a vertical quarter-circle of radius 0.8 m, as shown. At the bottom the track is horizontal. What is the normal force exerted by the track on the block at the bottom? (g=10 m s−2g = 10\ \text{m s}^{-2})

    Class 11 Physics Work Energy Power

    MCQMedium
    1 mark
  19. 19

    Question 19

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Kinetic friction does negative work on a block sliding over a fixed rough floor, but the friction force on the floor does no work.

    Reason (R): The friction forces that the block and the floor exert on each other are not equal in magnitude, because only the block is moving.

    MCQMedium
    1 mark
  20. 20

    Question 20

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): When two identical carts moving towards each other with equal speeds on a smooth track collide elastically, each cart rebounds with its original speed.

    Reason (R): The total momentum of the carts is zero, so after the collision they must have equal and opposite momenta, and conservation of kinetic energy then requires each speed to be unchanged.

    MCQMedium
    1 mark
  21. 21

    Question 21

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): Work done on a body can be negative, but its kinetic energy can never be negative.

    Reason (R): Kinetic energy depends on the direction of the velocity.

    MCQMedium
    1 mark
  22. 22

    Question 22

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): If the net work done on a body is zero, its velocity must be constant.

    Reason (R): Work is a vector quantity.

    MCQMedium
    1 mark
  23. 23

    Question 23

    Read the passage and answer the questions that follow.

    A roller-coaster car of mass 500 kg (with its riders) is pulled up to point A, 20 m above the ground, and released from rest. It runs down to the lowest point B at ground level, climbs over a hump C that is 12 m high, and comes down again to ground level at D, as shown. The track from A to D is effectively frictionless. After D the car runs onto a rough level braking stretch, where a constant friction force of 2500 N acts on it until it stops. Take g=10 m s−2g = 10\ \text{m s}^{-2} and ground level as the zero of potential energy.

    Class 11 Physics Work Energy Power

    (i) Find the speed of the car at B.

    (ii) Find the speed of the car at the top of the hump C.

    (iii) Find the potential energy and the kinetic energy of the car at C, and show that their sum equals the energy at A.

    (iv) How far along the braking stretch does the car travel before it stops?

    (v) The friction on the braking stretch is in fact μmg\mu mg with μ=0.5\mu = 0.5. Show that a fully loaded car of mass 800 kg released from A would also stop in the same distance.

    Medium
    5 marks
  24. 24

    Question 24

    Read the passage and answer the questions that follow.

    Buffers at the end of a toy railway track are tested with a 0.5 kg block. The block slides at 2 m s−12\ \text{m s}^{-1} along a smooth horizontal floor towards a light spring of spring constant 450 N m−1450\ \text{N m}^{-1} fixed to a wall, as shown. It compresses the spring, comes momentarily to rest and is pushed back.

    Class 11 Physics Work Energy Power

    (i) Find the maximum compression of the spring.

    (ii) Find the speed of the block when the spring is compressed by 4 cm.

    (iii) Find the largest force the spring exerts on the block and the largest deceleration of the block.

    (iv) With what speed does the block leave the spring? What is the total work done by the spring on the block from first contact until it leaves?

    (v) The spring is replaced by one four times as stiff (k=1800 N m−1k = 1800\ \text{N m}^{-1}). How do the maximum compression and the largest force change?

    Medium
    5 marks
  25. 25

    Question 25

    Read the passage and answer the questions that follow.

    A car of mass 1000 kg has an engine that can deliver a maximum power of 20 kW. Air drag and rolling friction together exert a resistive force on the car that may be taken as a constant 500 N. The power delivered by the engine to drive the car is related to the driving force FF and the speed vv by P=FvP = Fv. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    (i) Find the power the engine must deliver to keep the car moving at a steady 20 m s−120\ \text{m s}^{-1} on a level road.

    (ii) The car climbs a straight slope that rises 1 m for every 20 m travelled along the road (sin⁡θ=120\sin\theta = \frac{1}{20}). Find the power needed to climb it at a steady 20 m s−120\ \text{m s}^{-1}.

    (iii) On a level road, the car is moving at 10 m s−110\ \text{m s}^{-1} and the engine delivers its full 20 kW. Find the driving force and the acceleration of the car at that instant.

    (iv) Find the top speed of the car on a level road.

    (v) The engine can produce a large driving force at low speed. Explain why, even so, the car has a top speed.

    Medium
    5 marks
  26. 26

    Question 26

    Read the passage and answer the questions that follow.

    In a railway yard, wagons are joined by letting one roll into another so that their automatic couplings lock. A 20 t wagon moving at 3.0 m s−13.0\ \text{m s}^{-1} catches up with a 10 t wagon moving at 1.5 m s−11.5\ \text{m s}^{-1} in the same direction on a straight level track, as shown. The wagons couple and move on together. Friction with the track may be ignored during the short coupling. (1 t = 1000 kg)

    Class 11 Physics Work Energy Power

    (i) Find the common velocity of the wagons after coupling.

    (ii) Find the total kinetic energy of the wagons before and after coupling.

    (iii) How much kinetic energy is lost, and what becomes of it?

    (iv) Find the change in momentum of each wagon, and explain the result.

    (v) If the 10 t wagon had been at rest instead, what would the common velocity and the loss of kinetic energy have been? Why is the loss larger?

    Medium
    5 marks
  27. 27

    Question 27

    A 2 kg block starts from rest at x=0x = 0 on a smooth horizontal surface. A horizontal force FF along the xx-axis acts on it; the graph shows how FF varies with the block's position xx.

    Class 11 Physics Work Energy Power

    (a) Find the work done by the force as the block moves from x=0x = 0 to x=5 mx = 5\ \text{m}.

    (b) Find the total work done by the force from x=0x = 0 to x=8 mx = 8\ \text{m}.

    (c) Find the speed of the block at x=5 mx = 5\ \text{m} and at x=8 mx = 8\ \text{m}.

    (d) At what position is the block moving fastest? Find this greatest speed.

    Medium
    4 marks
  28. 28

    Question 28

    A drone carrying a parcel experiences a constant wind force F⃗=(i^+2 j^+2 k^) N\vec{F} = (\hat{i} + 2\,\hat{j} + 2\,\hat{k})\ \text{N} while it undergoes a displacement d⃗=(2 i^−j^+2 k^) m\vec{d} = (2\,\hat{i} - \hat{j} + 2\,\hat{k})\ \text{m}.

    (a) How much work does the wind force do on the drone?

    (b) Find the angle between the wind force and the displacement.

    (c) Find the component of the wind force along the displacement, and check that it gives the same work as in (a).

    Medium
    3 marks
  29. 29

    Question 29

    A worker drags a 40 kg box from rest across a level warehouse floor with a rope that makes an angle of 60∘60^\circ with the horizontal. The tension in the rope is 200 N, and the kinetic friction force on the box is 60 N, as shown. The box moves 10 m. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Class 11 Physics Work Energy Power

    (a) Find the work done on the box by each of the four forces acting on it: the tension, friction, gravity and the normal force.

    (b) Use the work-energy theorem to find the speed of the box after 10 m.

    Medium
    3 marks
  30. 30

    Question 30

    A girl standing at the edge of a cliff 25 m above the sea throws three identical stones, each with a speed of 10 m s−110\ \text{m s}^{-1}: one upward at 60∘60^\circ above the horizontal, one horizontally and one downward at 45∘45^\circ below the horizontal, as shown. Ignore air resistance and take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Class 11 Physics Work Energy Power

    (a) Find the speed of each stone as it reaches the sea. Explain why the direction of throw does not matter.

    (b) Find the speed of a stone when it is 10 m above the sea.

    (c) State one quantity at the sea surface that does depend on the direction of throw.

    Medium
    3 marks
  31. 31

    Question 31

    In a Newton's-cradle-style demonstration, a 1 kg steel ball moving at 4 m s−14\ \text{m s}^{-1} strikes a 3 kg steel ball at rest, head-on. The collision may be taken as elastic.

    (a) Find the velocities of both balls after the collision.

    (b) Verify that both momentum and kinetic energy are conserved.

    (c) If instead the 3 kg ball, moving at 4 m s−14\ \text{m s}^{-1}, strikes the 1 kg ball at rest (elastic, head-on), find the velocities of both balls after the collision. Comment on the result.

    Medium
    3 marks
  32. 32

    Question 32

    A 60 kg student runs up a staircase of 30 steps, each 15 cm high, in 9 s. On another day she walks up the same staircase in 30 s. Take g=10 m s−2g = 10\ \text{m s}^{-2} and ignore any change in her speed at the start and end.

    (a) Find the work she does against gravity in climbing the staircase.

    (b) Find her average power when running, in watts and in horsepower (1 hp = 746 W).

    (c) Find her average power when walking. Explain why the work is the same on both days but the power is not.

    Medium
    3 marks
  33. 33

    Question 33

    In a braking test, a 1200 kg car moving at 36 km/h stops in 10 m after the brakes are applied. Assume the braking force is constant and is the only horizontal force.

    (a) Find the braking force.

    (b) Find the stopping distance if the car is moving at 72 km/h and the same braking force acts.

    (c) A road-safety poster says "Double your speed, and you need four times the distance to stop." Is this correct? Explain using energy.

    Medium
    3 marks
  34. 34

    Question 34

    A railway porter carries a 20 kg suitcase on his head for 50 m along a level platform, and then climbs a flight of stairs that rises 3 m to a footbridge. Taking g=10 m s−2g = 10\ \text{m s}^{-2}, find the work done by the porter on the suitcase against gravity in each part, and explain the difference using W=Fdcos⁡θW = Fd\cos\theta. (Assume he moves at a steady speed.)

    Medium
    2 marks
  35. 35

    Question 35

    A block is pushed 2 m to the right along a rough table and then 2 m back to its starting point. The friction force on it is 5 N throughout. Find the total work done by friction on the block over the round trip, and use the result to decide whether friction is a conservative force.

    Medium
    2 marks
  36. 36

    Question 36

    In a long-jump pit test, a 0.5 kg ball is dropped from rest from a height of 1.95 m above the surface of the sand. It sinks 5.0 cm into the sand before stopping. Taking g=10 m s−2g = 10\ \text{m s}^{-2} and ignoring air resistance, find (a) the speed of the ball as it reaches the sand and (b) the average resistive force of the sand on the ball.

    Medium
    2 marks
  37. 37

    Question 37

    A 4 kg rifle fires an 8 g bullet horizontally at 350 m s−1350\ \text{m s}^{-1}. Find the recoil speed of the rifle and the kinetic energies of the bullet and the rifle. The shooter's shoulder brings the recoiling rifle to rest within 5 cm; find the average force on the shoulder, and explain why the recoil is harmless while the bullet is deadly.

    Medium
    2 marks
  38. 38

    Question 38

    A 1.5 kW air conditioner runs for 8 hours a day for 30 days. Electricity costs ₹6 per unit (1 unit = 1 kWh).

    (a) Find the electrical energy it uses in kilowatt hours and in joules, and the cost.

    (b) An inverter air conditioner that cools the room equally well draws an average of only 0.9 kW over the same hours. How much energy and money does it save in the month?

    Medium
    2 marks
  39. 39

    Question 39

    A 10 g bullet moves at 400 m s−1400\ \text{m s}^{-1}, and a 1000 kg car rolls at 1.2 m s−11.2\ \text{m s}^{-1}. Compare their kinetic energies and momenta. Which one needs the larger average force to stop it (a) in the same time, (b) in the same distance?

    Medium
    2 marks
  40. 40

    Question 40

    A 2 kg rail-mounted toy trolley is rolling at 3 m s−13\ \text{m s}^{-1}. A child tries to hold it back: her hand exerts a constant force F⃗=(−2 i^+j^) N\vec{F} = (-2\,\hat{i} + \hat{j})\ \text{N} on it while the rails guide it through a displacement d⃗=(3 i^+2 j^) m\vec{d} = (3\,\hat{i} + 2\,\hat{j})\ \text{m}. Her force is the only force that does work on the trolley. Find the work done by her force and the speed of the trolley at the end of this displacement. What does the sign of the work tell you?

    Medium
    2 marks
  41. 41

    Question 41

    A particle is acted on by a constant force F⃗=(2i^+3j^+4k^) N\vec{F} = (2\hat{i} + 3\hat{j} + 4\hat{k})\ \text{N} while it moves from the origin to the point (1,1,1)(1, 1, 1) m. It can go by either of two routes:

    Path I: along the straight line joining the two points.

    Path II: 1 m along xx, then 1 m along yy, then 1 m along zz.

    Which option correctly gives the work done by F⃗\vec{F} on the two paths and the angle between F⃗\vec{F} and the displacement?

    MCQHard
    1 mark
  42. 42

    Question 42

    A 0.5 kg bead can slide without friction along a straight horizontal wire lying along the xx-axis. A fixed charge near the end of the wire repels it with a force F=6x2F = \dfrac{6}{x^2} newton along +x+x, where xx is in metres. The bead is released from rest at x=1 mx = 1\ \text{m}.

    What is the speed of the bead when it reaches x=3 mx = 3\ \text{m}?

    MCQHard
    1 mark
  43. 43

    Question 43

    A 2 kg particle moves along the xx-axis under a conservative force whose potential energy is V(x)=(2x3−6x)V(x) = (2x^3 - 6x) joule, with xx in metres. No other force acts along the axis. The particle is released from rest at x=0x = 0.

    Where does the particle have its greatest speed, and what is that speed?

    MCQHard
    1 mark
  44. 44

    Question 44

    A 1 kg trolley and a 4 kg trolley move on a level track with the same kinetic energy. Each is brought to rest by the same constant retarding force FF.

    What is the ratio of their stopping distances, and the ratio of their stopping times (1 kg trolley : 4 kg trolley)?

    MCQHard
    1 mark
  45. 45

    Question 45

    A small block is placed at the top of a smooth hemisphere of radius R=0.90 mR = 0.90\ \text{m} fixed with its flat face on the ground, as shown. The block is given a negligibly small push and slides down the curved surface. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Class 11 Physics Work Energy Power

    At what height above the centre O does the block lose contact with the surface, and what is its speed there?

    MCQHard
    1 mark
  46. 46

    Question 46

    A 1 kg ball is dropped from rest from a height of 0.40 m above the top of a light vertical spring of spring constant 1000 N m−11000\ \text{N m}^{-1} standing on the floor. The ball lands on the spring and compresses it. Take g=10 m s−2g = 10\ \text{m s}^{-2} and neglect air resistance.

    What is the maximum compression of the spring, and where is the speed of the ball greatest?

    MCQHard
    1 mark
  47. 47

    Question 47

    A spring gun lies along a smooth plane inclined at 30∘30^\circ to the horizontal, pointing up the plane. Its spring (k=500 N m−1k = 500\ \text{N m}^{-1}) is compressed by 0.20 m and a 0.1 kg ball rests against it. The spring is released and the ball shoots up along the plane. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    How far along the plane, measured from the point where the ball was at rest before release, does the ball travel before it momentarily stops?

    MCQHard
    1 mark
  48. 48

    Question 48

    A 750 kg car starts from rest on a level road. Its engine delivers a constant power of 9 kW to the car, and all resistive forces may be neglected.

    What are the speed of the car after 6 s and the distance it covers in those 6 s?

    MCQHard
    1 mark
  49. 49

    Question 49

    A 2 kg body starts from rest on a smooth horizontal surface. A horizontal force F=4tF = 4t newton (with tt in seconds) acts on it from t=0t = 0.

    What are the instantaneous power delivered by the force at t=2 st = 2\ \text{s} and the average power delivered over the first 2 s?

    MCQHard
    1 mark
  50. 50

    Question 50

    An α-particle (mass 4 u) moving with kinetic energy KK collides head-on and elastically with a nitrogen-14 nucleus (mass 14 u) that is at rest.

    What fraction of KK is transferred to the nitrogen nucleus?

    MCQHard
    1 mark
  51. 51

    Question 51

    On a smooth straight groove, a 1 kg ball moving at speed uu collides head-on and elastically with a 5 kg ball at rest. Some distance ahead of the 5 kg ball is a rigid wall perpendicular to the groove, off which a ball rebounds with its speed unchanged.

    Which statement correctly describes what happens?

    MCQHard
    1 mark
  52. 52

    Question 52

    On a smooth air table, a 1 kg puck moving at 6 m s−16\ \text{m s}^{-1} along the +x+x direction strikes a 2 kg puck at rest. After the collision the 1 kg puck moves at 2 m s−12\ \text{m s}^{-1} along the +y+y direction, at right angles to its original motion.

    Which option correctly gives the velocity of the 2 kg puck after the collision and the nature of the collision?

    MCQHard
    1 mark
  53. 53

    Question 53

    A 1.5 kg block is released from rest at the top of a smooth ramp 0.80 m high. At the foot of the ramp it moves onto a level floor and immediately strikes a 0.5 kg block lying at rest; the two stick together. The level floor is rough, with coefficient of kinetic friction 0.450.45 for both blocks. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    How far do the joined blocks slide along the floor before they stop?

    MCQHard
    1 mark
  54. 54

    Question 54

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): When a load of mass mm is lowered through a height hh at constant velocity by a rope, the work done by the rope on the load is −mgh-mgh.

    Reason (R): By the work–energy theorem, the work done by each force acting on a body is zero when its kinetic energy does not change.

    MCQHard
    1 mark
  55. 55

    Question 55

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): When a box rests without slipping on the floor of a truck that is accelerating forward along a level road, the static friction on the box, as seen from the ground, does positive work on it.

    Reason (R): Static friction from the truck floor is the only horizontal force on the box, so it must point forward, in the same direction as the box's displacement relative to the ground.

    MCQHard
    1 mark
  56. 56

    Question 56

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): When air resistance acts, the total work done by gravity on a ball thrown vertically upward and caught again at the same height is still zero.

    Reason (R): Air resistance does positive work on the ball on the way down, because the ball speeds up.

    MCQHard
    1 mark
  57. 57

    Question 57

    Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.

    Assertion (A): In a perfectly inelastic collision, all of the initial kinetic energy of the colliding bodies is always lost.

    Reason (R): Linear momentum is not conserved in a perfectly inelastic collision.

    MCQHard
    1 mark
  58. 58

    Question 58

    A 2 kg parcel is placed gently (at rest) on a long horizontal conveyor belt that is kept moving at a constant 3 m s−13\ \text{m s}^{-1} by a motor. The coefficient of kinetic friction between the parcel and the belt is 0.30.3. The parcel slips until it reaches the belt's speed. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Working in the ground frame, which option gives, in order: the work done by friction on the parcel, the heat produced by the sliding, and the extra energy the motor must supply?

    MCQHard
    1 mark
  59. 59

    Question 59

    Blocks of mass 2 kg and 3 kg hang at the two ends of a light, inextensible string passing over a light, frictionless pulley. The system is released from rest. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Using energy methods, find the speed of the blocks when the 3 kg block has descended 1 m, and the tension in the string.

    MCQHard
    1 mark
  60. 60

    Question 60

    A 1 kg block moves along the xx-axis on a smooth surface and passes x=0x = 0 with velocity 2 m s−12\ \text{m s}^{-1} in the +x+x direction. The force FF on it along the axis varies with position as shown in the graph.

    Class 11 Physics Work Energy Power

    What is the speed of the block at x=1 mx = 1\ \text{m}, and at what position does it momentarily come to rest?

    MCQHard
    1 mark
  61. 61

    Question 61

    A motorboat moves at a steady speed through still water. The water's resistance is proportional to the square of the boat's speed. At 15 m s−115\ \text{m s}^{-1} the engine must deliver 10 kW.

    What power must the engine deliver, and what is the resistive force, when the boat moves at a steady 30 m s−130\ \text{m s}^{-1}?

    MCQHard
    1 mark
  62. 62

    Question 62

    A 20 g bullet moving horizontally at 500 m s−1500\ \text{m s}^{-1} passes straight through a 2 kg wooden block resting on a smooth horizontal floor and emerges at 300 m s−1300\ \text{m s}^{-1}.

    What are the speed of the block after the bullet leaves it, and the mechanical energy converted into heat and deformation?

    MCQHard
    1 mark
  63. 63

    Question 63

    Loop-the-loop. An amusement-park model has a smooth track that runs down from a platform and then round a vertical circular loop of radius R=2 mR = 2\ \text{m}, as shown. A small 0.5 kg car is released from rest on the track at a height hh above the bottom B of the loop. T is the top of the loop. The car is small compared with the loop, friction and air resistance are negligible, and g=10 m s−2g = 10\ \text{m s}^{-2}.

    Class 11 Physics Work Energy Power

    (i) Show that the car goes round the loop without losing contact with the track only if h≥52Rh \ge \frac{5}{2}R, and find this least height.

    (ii) The car is released from h=6 mh = 6\ \text{m}. Find its speed at T.

    (iii) Draw the free-body diagram of the car at T and find the normal force the track exerts on it there.

    (iv) Find the normal force on the car at B, just after it enters the loop, and draw its free-body diagram.

    (v) Show that NB−NT=6mgN_B - N_T = 6mg for any release height at which the car completes the loop, and check your answers to (iii) and (iv) against this.

    Hard
    5 marks
  64. 64

    Question 64

    Spring buffer on a rough floor. A 1 kg block slides along a rough horizontal floor towards a light spring of spring constant 150 N m−1150\ \text{N m}^{-1} fixed to a wall, as shown. At the instant it touches the free end of the spring its speed is 5 m s−15\ \text{m s}^{-1}. The coefficient of friction between the block and the floor (static and kinetic) is 0.250.25 everywhere. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Class 11 Physics Work Energy Power

    (i) Find the maximum compression of the spring.

    (ii) Show that the block does not stay at rest at maximum compression.

    (iii) Find the speed of the block when it leaves the spring.

    (iv) Find the heat produced by friction while the block is in contact with the spring.

    (v) How far from the free end of the spring does the block finally stop? Show that the total heat produced from the moment of first contact equals the kinetic energy the block had at that moment.

    Hard
    5 marks
  65. 65

    Question 65

    Power against speed-dependent drag. A 1500 kg car has an engine whose maximum useful power output is 27 kW. The total resistance on the car is proportional to its speed: R=30vR = 30v newton, with vv in m s−1\text{m s}^{-1}. A hill road rises steadily with sin⁡θ=0.064\sin\theta = 0.064. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    (i) Find the top speed of the car on a level road.

    (ii) Find its top speed up the hill.

    (iii) The car is climbing the hill at 10 m s−110\ \text{m s}^{-1} with the engine at full power. Find its acceleration.

    (iv) The driver switches the engine off while going down the same hill. Explain why the car does not keep speeding up, and find the steady speed it settles at.

    (v) When the car climbs the hill at its top speed, how much of the engine's 27 kW is used against the resistance, and how much goes into raising the car's potential energy?

    Hard
    5 marks
  66. 66

    Question 66

    Newton's cradle, unequal masses. Three balls of masses 1 kg, 2 kg and 4 kg lie at rest in a smooth, straight groove, as shown. The 1 kg ball is set moving at 9 m s−19\ \text{m s}^{-1} towards the 2 kg ball. Every collision is head-on and elastic. Take the initial direction of motion (to the right) as positive.

    Class 11 Physics Work Energy Power

    (i) Find the velocities of the 1 kg and 2 kg balls after their collision.

    (ii) The 2 kg ball then strikes the 4 kg ball. Find their velocities after this collision.

    (iii) Show that no further collisions take place.

    (iv) Find the final kinetic energy of each ball and check that the total kinetic energy is conserved.

    (v) What fraction of the initial kinetic energy ends up in the 4 kg ball? Verify that the total momentum is conserved.

    Hard
    5 marks
  67. 67

    Question 67

    A 0.5 kg bob hangs from a light string 1.0 m long. It is given a horizontal speed of 7 m s−17\ \text{m s}^{-1} at the lowest point. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    (a) Find the tension in the string just after the bob is set moving.

    (b) Show that the bob cannot complete the vertical circle.

    (c) Find the angle from the lowest position, and the height above the lowest point, at which the string becomes slack, and the speed of the bob there.

    (d) Describe the motion of the bob just after the string becomes slack.

    Hard
    4 marks
  68. 68

    Question 68

    A 1 kg body moves along the xx-axis on a smooth surface. At x=0x = 0 its velocity is 2 m s−12\ \text{m s}^{-1} in the +x+x direction. A force F=(3x2−4x)F = (3x^2 - 4x) newton, with xx in metres, acts on it along the axis.

    (a) Find the work done by FF from x=0x = 0 to x=2 mx = 2\ \text{m}, and hence the speed of the body at x=2 mx = 2\ \text{m}.

    (b) Find its speed at x=1 mx = 1\ \text{m}.

    (c) Where between x=0x = 0 and x=2 mx = 2\ \text{m} is the body slowest, and what is its speed there?

    Hard
    3 marks
  69. 69

    Question 69

    A 5 kg block is projected up a rough plane inclined at 37∘37^\circ to the horizontal with a speed of 10 m s−110\ \text{m s}^{-1}. The coefficient of friction between the block and the plane is 0.250.25. Take g=10 m s−2g = 10\ \text{m s}^{-2}, sin⁡37∘=0.6\sin 37^\circ = 0.6 and cos⁡37∘=0.8\cos 37^\circ = 0.8.

    (a) How far up the plane does the block travel? Show that it then slides back down.

    (b) Find its speed when it returns to the starting point.

    (c) Find the total work done by friction over the round trip, and check it with the work–energy theorem.

    Hard
    3 marks
  70. 70

    Question 70

    A 0.995 kg block rests on a smooth horizontal floor, attached to one end of a horizontal spring of spring constant 900 N m−1900\ \text{N m}^{-1} whose other end is fixed to a wall. A 5 g bullet moving at 600 m s−1600\ \text{m s}^{-1} along the axis of the spring, towards the wall, strikes the block and stays embedded in it.

    (a) Find the speed of the block just after the impact.

    (b) Find the maximum compression of the spring.

    (c) How much kinetic energy is lost in the impact? Explain why you may not equate the bullet's kinetic energy to the spring's energy at maximum compression.

    Hard
    3 marks
  71. 71

    Question 71

    A constant force F⃗=(2i^+3j^) N\vec{F} = (2\hat{i} + 3\hat{j})\ \text{N} acts on a body. At a certain instant the velocity of the body is v⃗=(4i^−j^+k^) m s−1\vec{v} = (4\hat{i} - \hat{j} + \hat{k})\ \text{m s}^{-1}.

    (a) Find the power delivered by the force at that instant.

    (b) Find the angle between F⃗\vec{F} and v⃗\vec{v}.

    (c) Suppose F⃗\vec{F} is the only force on the body, whose mass is 1 kg, and the instant above is t=0t = 0. Find the power delivered by F⃗\vec{F} at t=2 st = 2\ \text{s} and the work it does in the first 2 s.

    Hard
    3 marks
  72. 72

    Question 72

    A 0.4 kg bob hangs from a light string 1.2 m long attached to a fixed point O. The bob is pulled aside until the string is horizontal and taut, and released from rest, as shown. The string can bear a tension of at most 9 N. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    Class 11 Physics Work Energy Power

    (a) Show that when the string makes an angle θ\theta with the vertical, its tension is T=3mgcos⁡θT = 3mg\cos\theta.

    (b) Show that the string must break before the bob reaches the lowest point, and find the angle with the vertical at which it breaks.

    (c) Find the speed of the bob at the instant the string breaks.

    Hard
    3 marks
  73. 73

    Question 73

    The graph shows how the potential energy VV of a particle moving along the xx-axis depends on its position. No other force acts along the axis. The particle comes in from the left (from x<0x < 0) moving in the +x+x direction, with total mechanical energy E=8 JE = 8\ \text{J}.

    Class 11 Physics Work Energy Power

    (a) Find the kinetic energy of the particle at x=0.5 mx = 0.5\ \text{m} and at x=2 mx = 2\ \text{m}.

    (b) Find the position at which the particle turns back, and the force on it in the region 1 m<x<3 m1\ \text{m} < x < 3\ \text{m}.

    (c) In the region x>6 mx > 6\ \text{m} the potential energy (4 J) is less than EE. Explain whether the particle can ever be found there.

    Hard
    3 marks
  74. 74

    Question 74

    A bullet fired into a stack of identical wooden planks loses one-tenth of its speed in passing through the first plank. Assume that each plank offers the same constant resistive force.

    (a) What fraction of the bullet's initial kinetic energy is lost in each plank?

    (b) How many planks can the bullet pass through completely, and in which plank does it stop?

    (c) Express its speed on leaving the last plank it passes through completely as a fraction of its initial speed uu.

    Hard
    3 marks
  75. 75

    Question 75

    Two skaters, of masses 40 kg and 60 kg, stand at rest facing each other on smooth ice and push each other apart. After the push the 40 kg skater moves at 3 m s−13\ \text{m s}^{-1}.

    (a) Find the speed of the 60 kg skater.

    (b) The forces the skaters exert on each other are equal and opposite. Show that the total work done by this pair of forces is not zero, and state where this energy comes from.

    Hard
    2 marks
  76. 76

    Question 76

    On a real roller coaster, each hill after the first must be lower than the one before it. A 600 kg car passes over the top of the first hill almost at rest. Friction and air resistance do −12 kJ-12\ \text{kJ} of work on the car between the top of the first hill and the top of the second. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    (a) Using Wnc=ΔEW_{nc} = \Delta E, find the least amount by which the second hill must be lower than the first for the car to get over it.

    (b) Explain why the second hill could be as high as the first on an ideal, frictionless track, but not on a real one.

    Hard
    2 marks
  77. 77

    Question 77

    When a moving body of mass m1m_1 strikes a body of mass m2m_2 at rest and the two move together afterwards, the fraction of the initial kinetic energy lost is m2m1+m2\dfrac{m_2}{m_1 + m_2}.

    (a) A carpenter drives a 50 g nail with a hammer whose head has mass 1.5 kg. A blacksmith strikes a piece of hot iron resting on an anvil, with a 2 kg hammer; the iron and anvil together have mass 100 kg. Treating each blow as a collision in which the bodies move together, find the fraction of the hammer's kinetic energy lost in each case.

    (b) Use your results to explain why the carpenter wants a heavy hammer and a light nail, while the blacksmith wants the heaviest possible anvil.

    Hard
    2 marks
  78. 78

    Question 78

    On a smooth straight track, a 5 kg trolley moving at 8 m s−18\ \text{m s}^{-1} runs into a 3 kg trolley at rest. A light spring of spring constant 3000 N m−13000\ \text{N m}^{-1} is fixed to the front of the 3 kg trolley, so the trolleys interact only through the spring, and no energy is lost.

    (a) At the instant of maximum compression the two trolleys move with the same velocity. Find this velocity and the maximum compression of the spring.

    (b) Find the velocities of the two trolleys after they separate.

    Hard
    2 marks
  79. 79

    Question 79

    A 2 kg box sits on a shelf 5 m above the floor of a warehouse. A table 1 m high stands on the floor. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

    (a) Find the potential energy of the box on the shelf (i) taking the floor as the zero of potential energy, and (ii) taking the table top as the zero. With choice (ii), what is the potential energy of the box when it is on the floor?

    (b) The box is released from rest and slides from the shelf down a rough chute onto the table top; friction in the chute does −30 J-30\ \text{J} of work on it. Find the box's kinetic energy and speed on reaching the table, and show that both choices of zero give the same answer.

    Hard
    2 marks
  80. 80

    Question 80

    (a) Using A⃗⋅A⃗=A2\vec{A}\cdot\vec{A} = A^2 and the properties of the scalar product, show that ∣A⃗+B⃗∣2=A2+B2+2ABcos⁡θ|\vec{A} + \vec{B}|^2 = A^2 + B^2 + 2AB\cos\theta, where θ\theta is the angle between A⃗\vec{A} and B⃗\vec{B}. Hence show that if ∣A⃗+B⃗∣=∣A⃗−B⃗∣|\vec{A} + \vec{B}| = |\vec{A} - \vec{B}| (both vectors non-zero), then A⃗\vec{A} and B⃗\vec{B} are perpendicular.

    (b) Verify this for A⃗=2i^+j^−2k^\vec{A} = 2\hat{i} + \hat{j} - 2\hat{k} and B⃗=2i^−2j^+k^\vec{B} = 2\hat{i} - 2\hat{j} + \hat{k}.

    Hard
    2 marks