(i) At a steady speed the acceleration is zero, so the driving force balances the resistance: F=500 N.
P=Fv=500×20=1.0×104 W=10 kW
Power needed on the level =10 kW.
(ii) On the slope the car also has to overcome the component of its weight along the road:
mgsinθ=1000×10×201=500 N

At a steady speed the driving force must balance both backward forces, F=500+500=1000 N, so
P=Fv=1000×20=2.0×104 W=20 kW
Power needed on the slope =20 kW.
This is the engine's full power; it could not climb this slope any faster than 20 m s−1.
(iii) From P=Fv:
F=vP=1020000=2000 N
Net force =2000−500=1500 N, so
a=10001500=1.5 m s−2
Driving force =2000 N; acceleration =1.5 m s−2.
(iv) At top speed the car no longer accelerates, so at full power the driving force just equals the resistance:
vmax=FPmax=50020000=40 m s−1
Top speed on a level road =40 m s−1.
(v) The engine's output is limited by its power, not by a fixed force. At full power, F=Pmax/v, so the faster the car goes, the smaller the driving force the engine can supply: 2000 N at 10 m s−1 but only 500 N at 40 m s−1. As the speed rises, the driving force falls until it equals the resistive force; then the net force and the acceleration are zero, and the car cannot go faster. Equivalently, the engine's 20 kW is then entirely used up doing work against resistance, 500×40=20000 W, with nothing left to increase the kinetic energy.