Competency-Based Questions (CBQ) · Question 24 of 80
Read the passage and answer the questions that follow.
Question 245 marksMedium
Read the passage and answer the questions that follow.
Buffers at the end of a toy railway track are tested with a 0.5 kg block. The block slides at 2m s−1 along a smooth horizontal floor towards a light spring of spring constant 450N m−1 fixed to a wall, as shown. It compresses the spring, comes momentarily to rest and is pushed back.
(i) Find the maximum compression of the spring.
(ii) Find the speed of the block when the spring is compressed by 4 cm.
(iii) Find the largest force the spring exerts on the block and the largest deceleration of the block.
(iv) With what speed does the block leave the spring? What is the total work done by the spring on the block from first contact until it leaves?
(v) The spring is replaced by one four times as stiff (k=1800N m−1). How do the maximum compression and the largest force change?
The floor is smooth, so the block's kinetic energy is shared only with the elastic potential energy of the spring, and K+21kx2 stays constant. Initially
K0=21mv2=21(0.5)(2)2=1.0J
(i) At maximum compression xm the block is momentarily at rest, so all 1.0 J is stored in the spring:
Largest spring force =30N; largest deceleration =60m s−2.
(iv) As the spring expands back to its natural length, it returns all the stored energy, so the block leaves with kinetic energy 1.0 J, that is at 2m s−1, moving in the opposite direction.
The total work done by the spring over the whole contact is zero: during compression it does −21kxm2=−1.0J, and during expansion +1.0J. This agrees with the work-energy theorem, since the block's kinetic energy (its speed) is the same at the start and end. The spring force is conservative.
(v) The stored energy at maximum compression is still 1.0 J, so
xm′=18002×1.0=0.0333m=3.33cm
New maximum compression =3.33cm (halved).
Since xm∝1/k, four times the stiffness halves the compression. The largest force becomes
Fmax′=1800×0.0333=60N
New largest force =60N (doubled).
which is double the earlier value (Fmax=kxm∝k). A stiffer buffer stops the block in a shorter distance but with a larger force.