Opening your dashboard
Class 11 Chemistry Chapter 9 Organic Chemistry-Some Basic Concepts: Competency-Based Questions (CBQ)
80 questions on Chapter 9, each worked through on its own page with the AI tutor. Class 11 Chemistry, CBSE 2026-27.
80 questions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
A strip of fever tablets lists its active ingredient as paracetamol, whose structure is
(the and groups are para to each other on the benzene ring). A pharmacy student is asked to classify every carbon atom of the molecule by its state of hybridisation. What is the ratio of sp² hybridised to sp³ hybridised carbon atoms in paracetamol?
- 21 mark
Question 2
Acrylic dentures and the bone cement used to fix hip implants are made by polymerising methyl methacrylate:
How many σ bonds and how many π bonds are present in one molecule of methyl methacrylate?
- 31 mark
Question 3
Elm bark beetles that spread Dutch elm disease are trapped using a synthetic copy of their aggregation pheromone. The supplier's data sheet shows the pheromone only as the bond-line formula below.

What is the molecular formula of the pheromone?
- 41 mark
Question 4
Aspirin tablets that have been stored in a damp cupboard begin to smell of vinegar. A student looks up the structure of aspirin, in which two groups are attached ortho to each other on a benzene ring:
Which functional groups are present in aspirin?
- 51 mark
Question 5
"Banana oil", used to flavour sweets, is mainly the ester
What is its IUPAC name?
- 61 mark
Question 6
A household antiseptic liquid lists "chloroxylenol 4.8% w/v" as its active ingredient. The structure of chloroxylenol is shown.

What is the IUPAC name of chloroxylenol?
- 71 mark
Question 7
The C₅ fraction from a naphtha cracker contains every open-chain alkene of formula . An analyst wants one reference sample for each structural isomer (cis and trans forms are not counted separately, and ring compounds are not alkenes). How many reference samples are needed?
- 81 mark
Question 8
A food-quality lab finds that two samples have the same molecular formula, . One is a sweet-smelling solvent, methyl ethanoate, ; the other is propanoic acid, , whose salts are used as preservatives in bread. What type of isomerism do these two compounds show?
- 91 mark
Question 9
For a project on fuels, a student builds a ball-and-stick model of pent-2-yne,
How many carbon atoms of the model lie on one straight line?
- 101 mark
Question 10
In a refinery pilot plant, 2-methylbutane, CH₃–CH(CH₃)–CH₂–CH₃, is chlorinated in sunlight. After Cl–Cl breaks into chlorine atoms, a chlorine atom pulls a hydrogen atom off the alkane, leaving an alkyl free radical. The carbons of the main chain are numbered C-1 to C-4 from the left.
Removal of a hydrogen atom from which carbon gives the most stable free radical?
- 111 mark
Question 11
A food chemist wants the strongest acid among four candidate acidulants, all made from butanoic acid:
- P: butanoic acid, CH₃CH₂CH₂COOH
- Q: 2-chlorobutanoic acid, CH₃CH₂CHClCOOH
- R: 3-chlorobutanoic acid, CH₃CHClCH₂COOH
- S: 4-chlorobutanoic acid, ClCH₂CH₂CH₂COOH
Using the inductive effect, which is the correct order of decreasing acid strength?
- 121 mark
Question 12
A pharmaceutical trainee is given the reaction scheme below for the conversion of bromomethane into methanol by hydroxide ion. Only the reactants and the two curved arrows, (a) and (b), are drawn.

Which statement correctly interprets the arrows?
- 131 mark
Question 13
In a base-catalysed step used to make a fragrance intermediate, a base removes a proton from propanone, CH₃COCH₃, to give the anion [CH₃COCH₂]⁻. A trainee writes four pairs of structures and says that each pair shows resonance structures.
Which pair really shows two resonance structures of the same species?
- 141 mark
Question 14
A student separates the pigments of spinach leaves on a silica-gel TLC plate. The plate, with a centimetre scale measured from its bottom edge, is shown below. The sample was applied on the baseline, and the solvent front was marked when the plate was taken out.

The student records the green spot Y at 5.9 cm, the baseline at 1.5 cm and the solvent front at 9.5 cm (all from the bottom edge). What is the Rf value of the green pigment?
- 151 mark
Question 15
A process laboratory has four separation jobs on its list for the day:
- Job 1: recovering hexane (b.p. 342 K) from a solution of a non-volatile wax
- Job 2: separating hexane (b.p. 342 K) from heptane (b.p. 371 K)
- Job 3: purifying a liquid ester (normal b.p. 563 K) that begins to decompose at about 500 K
- Job 4: isolating a water-immiscible, steam-volatile oil from crushed seeds
Which job requires distillation under reduced pressure?
- 161 mark
Question 16
A forensic laboratory receives white powder seized from a suspect. The powder is fused with excess sodium and the Lassaigne's extract is tested:
- boiled with iron(II) sulphate and acidified with concentrated sulphuric acid: Prussian blue colour
- sodium nitroprusside added: violet colour
- boiled with concentrated nitric acid, then silver nitrate added: white precipitate, soluble in ammonium hydroxide
Which of these drugs could the powder be?
- 171 mark
Question 17
A quality-control chemist checks a batch of caffeine by Dumas' method. A sample of gives of nitrogen collected over potassium hydroxide solution at and an atmospheric pressure of . The aqueous tension at is .
What percentage of nitrogen does the analysis give?
- 181 mark
Question 18
A dairy laboratory estimates the protein in a milk powder by Kjeldahl's method. A sample is digested and the ammonia evolved is absorbed in of H₂SO₄. The unused acid needs of NaOH for neutralisation. For milk protein, % protein = 6.38 × % nitrogen.
What is the percentage of protein in the milk powder?
- 191 mark
Question 19
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): Acetaldol, , an intermediate in making flavour and perfume chemicals, is correctly named 4-oxobutan-2-ol.
Reason (R): The –OH group has a higher priority than the –CHO group, so –OH is the principal functional group and –CHO is cited as the prefix "oxo".
- 201 mark
Question 20
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): Propanone, , the solvent in nail-polish remover, and prop-2-en-1-ol, , are not isomers of each other.
Reason (R): Prop-2-en-1-ol contains one more hydrogen atom per molecule than propanone, because its –OH group carries a hydrogen atom that propanone lacks.
- 211 mark
Question 21
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): A computer model of the methyl carbocation, CH₃⁺, formed during a reaction, shows all four atoms in one plane with H–C–H bond angles of 120°.
Reason (R): The carbon of CH₃⁺ is sp³ hybridised, and its empty sp³ hybrid orbital points away from the three hydrogen atoms.
- 221 mark
Question 22
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): In a sealed bottle of propanone (acetone), with no reagent present, the π electrons of every C=O bond are completely transferred to the oxygen atom by the electromeric effect.
Reason (R): The electromeric effect is a permanent effect that operates in a molecule even when no attacking reagent is present.
- 235 marks
Question 23
Dentists use clove oil to numb toothache. Its main component, eugenol, has the structure shown.

(a) Name the three functional groups present in eugenol. (1½)
(b) Classify eugenol as alicyclic, benzenoid aromatic or non-benzenoid aromatic, with a reason. (1)
(c) Write the molecular formula of eugenol. How many of its carbon atoms are sp² and how many are sp³ hybridised, and how many σ and π bonds does one molecule contain? (1½)
(d) Write the IUPAC name of eugenol, taking phenol as the parent compound. (1)
- 245 marks
Question 24
Methyl tert-butyl ether (MTBE), , was added to petrol to make it burn more cleanly. Its molecular formula is .
(a) Write the IUPAC name of MTBE. (1)
(b) Write the condensed formulas and IUPAC names of all the ethers of formula . (2)
(c) From your list in (b), pick (i) a metamer of MTBE and (ii) an ether that is a chain isomer of MTBE. Give a reason for each choice. (1)
(d) Write the structure and IUPAC name of one alcohol that is a functional group isomer of MTBE. (1)
- 255 marks
Question 25
A flavour company synthesises a white crystalline compound that it suspects is vanillin. It contains only carbon, hydrogen and oxygen. A sample is burnt in the apparatus shown. Tube X gains and tube Y gains .

(a) Name the substances placed in U-tubes X and Y. Why must X come before Y and not after it? (1)
(b) Calculate the percentages of carbon and hydrogen in the compound. (2)
(c) Find the percentage of oxygen and the empirical formula of the compound. (1)
(d) The molar mass of the compound is found to be . Find its molecular formula. (1)
- 265 marks
Question 26
sec-Butylbenzene, used to make phenol and butanone, is made industrially by passing benzene and but-1-ene, CH₂=CH–CH₂–CH₃, over an acid catalyst. The acid supplies H⁺, which adds to the alkene to give a carbocation. The carbocation then attacks the benzene ring. The product is almost entirely sec-butylbenzene, C₆H₅–CH(CH₃)–CH₂–CH₃, with hardly any butylbenzene, C₆H₅–CH₂CH₂CH₂CH₃.
(a) Write the two carbocations that could form when H⁺ adds to but-1-ene, and classify each as primary, secondary or tertiary. (1)
(b) For each carbocation, count the α-hydrogens available for hyperconjugation. Use this count and the inductive effect to explain why the product is sec-butylbenzene. (2)
(c) In the step in which the carbocation attacks benzene, identify the electrophile and the nucleophile, giving a reason for each. (1)
(d) When H⁺ approaches but-1-ene, the π electrons of the C=C bond move completely towards one carbon to form the new C–H bond. Name this electron displacement effect and state whether it is permanent or temporary. (1)
- 274 marks
Question 27
A perfumer's catalogue gives the condensed formula of geraniol, the main rose-scented compound of rose and palmarosa oils:
(a) Draw the bond-line formula of geraniol. (1)
(b) Write its molecular formula and state the number of π bonds and the number of sp² hybridised carbon atoms. (1)
(c) Write the IUPAC name of geraniol. (1)
(d) Classify geraniol (open chain or cyclic) and name the functional groups it contains. (1)
- 283 marks
Question 28
During a stock check, a lab assistant finds three bottles whose labels do not follow IUPAC rules. For each label, give the correct IUPAC name and state the rule that was broken.
(i) "2-Ethylbutane", a solvent:
(ii) "Ethanol-2-amine", used to scrub carbon dioxide from gas streams:
(iii) "1-Chloro-2-bromobenzene", a dye intermediate: a benzene ring carrying Br and Cl on adjacent carbons
- 293 marks
Question 29
A refinery analyses its C₄ gas stream by gas chromatography. A sample of but-2-ene, , taken from the C₄ stream gives two separate peaks, but a sample of but-1-ene, , gives only one.
(a) Explain, using the features of the π bond, why but-2-ene exists as two different compounds. Name this type of isomerism. (1½)
(b) Why does but-1-ene not show this behaviour? (½)
(c) Predict whether pent-2-ene, , and 2-methylbut-2-ene, , would each give one peak or two if the sample contains every possible form of the compound. Give reasons. (1)
- 303 marks
Question 30
Long-chain straight aldehydes give the "aldehydic" sparkle to many famous perfumes. They belong to the homologous series . A perfumer's sample of one member has a molar mass of . (C = 12, H = 1, O = 16)
(a) Find the molecular formula and IUPAC name of this aldehyde. (1)
(b) Write the formula, name and molar mass of the member just below it in the series, and explain the difference in molar mass. (1)
(c) Why do all members of this series show similar chemical properties, while their boiling points change gradually? (1)
- 313 marks
Question 31
A biotechnology company produces an organic compound by fermentation; the compound ends up dissolved in the watery broth. It is more soluble in diethyl ether (density 0.71 g mL⁻¹, immiscible with water) than in water. The broth is shaken with ether in a separating funnel and allowed to stand, giving two layers P and Q.

(a) Which layer, P or Q, is the ether layer? Which layer is run out through the stopcock first? (1)
(b) The chemist has 150 mL of ether. Why should it be used as three portions of 50 mL rather than in one 150 mL portion? (1)
(c) How is the pure compound recovered from the combined ether extracts? (1)
- 323 marks
Question 32
Three unlabelled samples, S1, S2 and S3, are found in a clandestine laboratory. They are known to be chloroform (CHCl₃), bromoform (CHBr₃) and iodoform (CHI₃), in some order. The Lassaigne's extract of each is acidified with nitric acid and silver nitrate is added:
Sample Precipitate Effect of ammonium hydroxide S1 pale yellow sparingly soluble S2 white dissolves readily S3 yellow insoluble (a) Identify S1, S2 and S3. (1)
(b) Write the equations for the formation of sodium halide during fusion and of the precipitate for S2. (1)
(c) To confirm the identity of S1, of it is analysed by the Carius method and gives of silver bromide. Calculate the percentage of bromine and show that it agrees with your identification. (1)
- 333 marks
Question 33
Acetone cyanohydrin, an intermediate for agrochemicals, is prepared by adding cyanide ion to propanone, (CH₃)₂C=O. As CN⁻ approaches the carbonyl carbon, the π electrons of the C=O bond move completely onto the oxygen atom, and CN⁻ bonds to the carbon.
(a) Name the electron displacement effect involved and state the direction of the electron shift relative to the atom that the reagent attacks. (1)
(b) Explain why CN⁻ attacks the carbon of the C=O group and not the oxygen. (1)
(c) Classify CN⁻ as a nucleophile or an electrophile and name the type of reaction taking place. (1)
- 342 marks
Question 34
Vinylacetylene, , was once made on a large scale to produce neoprene rubber, which is used in wetsuits.
(a) State the hybridisation of each carbon atom, numbering the carbons from the end. (1)
(b) Is its IUPAC name but-1-en-3-yne or but-3-en-1-yne? Give the rule you used. (1)
- 352 marks
Question 35
Natural rubber is a polymer of isoprene, whose condensed formula is .
(a) Draw the bond-line formula of isoprene. (1)
(b) Write its IUPAC name, showing how you numbered the chain. (1)
- 362 marks
Question 36
A flavour-and-fragrance store room holds the four compounds below. Classify each one as acyclic (open chain), alicyclic homocyclic, alicyclic heterocyclic or benzenoid aromatic, giving a reason for each.
(i) Menthol (mint cooling agent): a cyclohexane ring carrying –OH, and groups
(ii) Tetrahydrofuran (solvent): a saturated five-membered ring of four groups and one O atom
(iii) Toluene (solvent):
(iv) Ethyl butanoate (pineapple flavour):
- 372 marks
Question 37
Butyl rubber, used for the inner tubes of tyres, is made from 2-methylpropene, . A student claims that all 12 atoms of 2-methylpropene lie in one plane. How many atoms must lie in the same plane? Explain using the requirements for π bond formation.
- 382 marks
Question 38
A pharmaceutical batch of sulfanilamide, C₆H₈N₂O₂S (molar mass 172 g mol⁻¹), is checked by the Carius method. A sample of gives of barium sulphate. Calculate the percentage of sulphur in the sample and say whether the batch matches the formula.
- 392 marks
Question 39
A food inspector heats a white powder labelled "glucose" with dry copper(II) oxide in a dry test tube. The gas given off turns lime water milky, and droplets on the cooler part of the tube turn white anhydrous copper sulphate blue.
(a) What does each observation show about the powder? Write the equations for the two detecting reactions. (1)
(b) The same test is then done on carbon tetrachloride, CCl₄, and on urea, NH₂CONH₂. Predict what is seen with lime water and with anhydrous copper sulphate for each, and explain. (1)
- 402 marks
Question 40
In a refinery, crude oil vapour enters near the bottom of a tall fractionating column. Three of the fractions drawn off are:
Fraction Boiling range diesel 520–620 K petrol 300–470 K kerosene 470–520 K (a) List the three fractions in order from the top of the column to the bottom, giving the reason. (1)
(b) Why is each fraction drawn off over a range of boiling points rather than at a single temperature? (1)
- 411 mark
Question 41
Isopropenylacetylene, , is a C₅ building block used in organic synthesis. A computational chemist wants to know the maximum number of atoms of this molecule that can lie in a single plane at the same time. What is that number?
- 421 mark
Question 42
Tetracyanoethylene (TCNE), , forms deeply coloured charge-transfer compounds and is used to make organic conductors and magnets. Each CN group is a nitrile, . How many σ bonds and how many π bonds are present in one molecule of TCNE?
- 431 mark
Question 43
Sulcatone, a compound in human skin odour, is one of the signals that attracts the dengue mosquito. Its bond-line formula is shown.

Which option gives the correct condensed formula and the correct IUPAC name?
- 441 mark
Question 44
A pharmacology student prepares a chart of four drugs, whose structures are shown below.

Which statement about their functional groups is correct?
- 451 mark
Question 45
Mevaldic acid is an intermediate in the body's synthesis of cholesterol. Its structure is
What is its IUPAC name?
- 461 mark
Question 46
When buta-1,3-diene is stored, it slowly dimerises to "VCH", an industrial starting material whose structure is shown.

What is the IUPAC name of VCH?
- 471 mark
Question 47
The "cresylic" fraction from a coke-oven plant contains aromatic compounds of formula . An analyst lists every possible structural isomer of that contains one benzene ring, and marks those that are phenols (–OH directly on the ring). Which option is correct?
- 481 mark
Question 48
A flavour lab's GC–MS shows four pairs of peaks in which both compounds of each pair have the same molecular formula. A trainee writes down the type of isomerism for each pair. Which pair has been matched correctly?
- 491 mark
Question 49
Disposable coffee cups are made of polystyrene, formed when styrene, , polymerises:
Consider one repeating unit in a very long chain (ignore the chain ends). How many carbon atoms change their hybridisation, and how do the numbers of π and σ bonds belonging to one unit change compared with one styrene molecule? (Count each bond that joins two units as half a bond for each unit.)
- 501 mark
Question 50
In a drug synthesis, nitromethane is treated with a base. The base removes a proton from carbon, giving a carbanion that then attacks a carbonyl compound. A process chemist explains why nitromethane forms its carbanion so easily by comparing four carbanions:
- P: CH₃⁻
- Q: (CH₃)₃C⁻
- R: CH₃CH₂⁻
- S: O₂N–CH₂⁻
Which is the correct order of decreasing stability?
- 511 mark
Question 51
A research student draws three separate steps from reactions run in her laboratory, using curved arrows.

Which description of the three steps is correct?
- 521 mark
Question 52
A medicinal chemist must separate a reaction mixture of three compounds, P, Q and R, on a silica-gel column. To choose the eluting solvent, she first spots pure samples of P, Q and R side by side on four silica-gel TLC plates and develops each plate in a different solvent. The distances moved are shown.

Which solvent should she use for the column, and which compound will come out of the column first?
- 531 mark
Question 53
A synthesis laboratory keeps four reactive species on its list:
- (i) ethanal, CH₃CHO
- (ii) the tert-butyl carbocation, (CH₃)₃C⁺
- (iii) methoxide ion, CH₃O⁻
- (iv) ethanenitrile, CH₃–C≡N
A chemist says that some of them can react either as a nucleophile or as an electrophile, depending on the partner. Which of them can play both roles?
- 541 mark
Question 54
A dye-intermediate supplier checks a batch of 4-aminoazobenzene, H₂N–C₆H₄–N=N–C₆H₅ (molar mass 197 g mol⁻¹), by Kjeldahl's method. A sample of the pure compound is digested and the ammonia evolved is absorbed in excess H₂SO₄.
What volume of the H₂SO₄ is actually used up by the ammonia?
- 551 mark
Question 55
A forensic chemist tests four seized substances, each of which contains nitrogen, by Lassaigne's method. Which one will not give a Prussian blue colour, even though it contains nitrogen?
- 561 mark
Question 56
A refinery catalyst interconverts the following C₆H₁₂ alkenes:
- P: 2,3-dimethylbut-2-ene, (CH₃)₂C=C(CH₃)₂
- Q: 2-methylpent-2-ene, (CH₃)₂C=CH–CH₂–CH₃
- R: hex-1-ene, CH₂=CH–CH₂–CH₂–CH₂–CH₃
- S: 3,3-dimethylbut-1-ene, CH₂=CH–C(CH₃)₃
Using only the number of hyperconjugation structures (α-hydrogens on carbons attached to the double-bond carbons), what is the predicted order of decreasing stability?
- 571 mark
Question 57
An unidentified industrial solvent is known to be a dihaloethane, C₂H₄X₂, in which both halogen atoms are the same. In a Carius determination, of it gives of silver halide, AgX.
Which halogen is present, and what is its percentage in the compound? (Ag = 108, Cl = 35.5, Br = 80, I = 127)
- 581 mark
Question 58
A sweetener manufacturer estimates oxygen directly instead of by difference. A sample is decomposed by heating in a stream of nitrogen; the gaseous products are passed over red-hot coke and then through warm iodine pentoxide. The carbon dioxide finally formed weighs .
What is the percentage of oxygen in the sample?
- 591 mark
Question 59
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): In 3-methylbuta-1,2-diene, , a C₅ hydrocarbon used in synthesis, the two methyl carbons and the two terminal hydrogen atoms do not lie in the same plane.
Reason (R): One molecule of 3-methylbuta-1,2-diene contains 12 σ bonds and 2 π bonds.
- 601 mark
Question 60
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): A branched alkane found in diesel, , is named 4-tert-butyl-5-isopropylnonane, with the tert-butyl group cited before the isopropyl group.
Reason (R): When substituent prefixes are arranged in alphabetical order, the prefixes iso-, sec- and tert- are all ignored, so isopropyl is alphabetised under "p".
- 611 mark
Question 61
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): Structural studies of propene, CH₂=CH–CH₃, show that its C2–C3 single bond is shorter than the C–C bond in ethane (154 pm).
Reason (R): The C2–C3 bond of propene is formed by the overlap of two sp³ hybrid orbitals.
- 621 mark
Question 62
Two statements are given below. One is labelled Assertion (A) and the other is labelled Reason (R). Read the statements carefully and choose the option that correctly describes statements A and R.
Assertion (A): A gas sample and a liquid sample from a petrochemical plant both analyse as 92.31 % carbon and 7.69 % hydrogen, so the two samples must have the same molecular formula.
Reason (R): The percentage composition of a compound fixes its molar mass.
- 635 marks
Question 63
Ibuprofen is one of the most widely used painkillers. Its bond-line structure is shown.

(a) Name the only functional group in ibuprofen and classify the compound (acyclic, alicyclic or benzenoid aromatic). (1)
(b) Write the molecular formula of ibuprofen and state how many of its carbon atoms are sp² and how many are sp³ hybridised. (1)
(c) How many σ bonds and how many π bonds are present in one molecule? (1)
(d) Derive the IUPAC name of ibuprofen, explaining your choice of parent chain and the numbering of the substituents. (2)
- 645 marks
Question 64
A fruit-essence lab isolates a neutral liquid (it does not react with sodium hydrogencarbonate, so it is not an acid) with a fruity odour. Analysis gives the molecular formula , and the compound is an ester.
(a) Write the condensed formulas and IUPAC names of all the esters of formula . (2)
(b) From your list, identify (i) a pair of position isomers and (ii) a pair of metamers. Give a reason for each. (2)
(c) A trainee adds "butyl methanoate" to the list. Explain why it is not an isomer of the unknown. (1)
- 655 marks
Question 65
A pharmaceutical company makes a new antibacterial compound containing carbon, hydrogen, nitrogen, sulphur and oxygen. Three separate analyses are carried out:
- Liebig: gives of CO₂ and of H₂O.
- Dumas: gives of nitrogen collected over KOH solution at and ; aqueous tension at = .
- Carius: gives of BaSO₄.
(a) Calculate the percentages of carbon and hydrogen. (1)
(b) Calculate the percentage of nitrogen. (1½)
(c) Calculate the percentage of sulphur, and find the percentage of oxygen by difference. (1)
(d) Find the empirical formula. The molar mass is found to be ; find the molecular formula. (1½)
- 665 marks
Question 66
After a synthesis, a crude reaction mixture contains:
- dichloromethane, the solvent (b.p. 313 K)
- a liquid by-product Q (b.p. 384 K)
- the desired product P, a white solid (m.p. 460 K) that is very soluble in hot ethanol but only slightly soluble in cold ethanol
- a small amount of a coloured tar, which is soluble in ethanol
(a) How should the solvent and Q be removed? Justify your choice of method. (1)
(b) Describe how P is then purified by crystallisation from ethanol, including the use of activated charcoal, and how the crystals are collected and dried. What becomes of the coloured tar? (2)
(c) The crystals are checked by TLC on silica gel. Lane 1 is the crystallised P and lane 2 is an authentic pure sample of P. Calculate the Rf values of the spots in lane 1, identify which spot is P, and state what the chemist should do next. (2)

- 674 marks
Question 67
Halothane was for many years a standard inhalation anaesthetic. A pharmacology textbook shows it in the wedge–dash representation below.

(a) For the right-hand carbon, state which attached atoms lie in the plane of the paper, which point towards the observer and which point away. (1)
(b) Write the condensed formula and the molecular formula of halothane. (1)
(c) Write its IUPAC name, explaining how you numbered the chain. (1)
(d) State the hybridisation of each carbon and the approximate bond angles. Why is a wedge–dash drawing needed to show the true shape? (1)
- 683 marks
Question 68
A gas chromatogram of a jet-fuel sample shows a branched alkane, , whose bond-line structure is given below.

(a) Show that there are two different ways to choose a seven-carbon chain, and state the substituents in each case. (1)
(b) State the IUPAC rule that decides between them. (1)
(c) Number the chosen chain and write the IUPAC name of the alkane. (1)
- 693 marks
Question 69
The unpleasant smell of valerian root and of sweaty socks comes from saturated monocarboxylic acids, . A sample of one such acid contains 31.4% oxygen by mass. (C = 12, H = 1, O = 16)
(a) Find the molecular formula of the acid. (1)
(b) Write the condensed formulas and IUPAC names of all the carboxylic acids with this formula. (1)
(c) Name the type of isomerism these acids show among themselves, and give the name of one ester that is a functional group isomer of them. (1)
- 703 marks
Question 70
An engineer at a polyethene plant uses these average bond enthalpies:
Bond C–C C=C C≡C Average bond enthalpy / kJ mol⁻¹ 347 611 837 (a) Assuming the σ part of a C=C bond is as strong as a C–C single bond, estimate the enthalpy of the π bond in C=C. (1)
(b) In the same way, estimate the average enthalpy of each π bond in C≡C. How does each π bond compare with a C–C σ bond? (1)
(c) A C=C bond (611 kJ mol⁻¹) is stronger overall than a C–C bond (347 kJ mol⁻¹), yet ethene reacts readily by addition and polymerisation while ethane does not. Use your answers to explain this. (1)
- 713 marks
Question 71
A farm worker is poisoned by the pesticide parathion, C₁₀H₁₄NO₅PS. A forensic chemist confirms the elements present in residue from the sprayer.
(a) The residue is fused with excess sodium. Write the equations for the conversion of its nitrogen and sulphur into ionic compounds, and describe the tests on the Lassaigne's extract that show each element, with what is seen. (1)
(b) The extract is boiled with nitric acid and silver nitrate is added. What result is expected, and what would a precipitate have meant? (1)
(c) Phosphorus is detected in a separate portion using sodium peroxide, nitric acid and ammonium molybdate. Explain the chemistry, with equations. (1)
- 723 marks
Question 72
In designing a protecting group for a drug synthesis, a chemist compares how easily three primary carbocations form:
- P: CH₃–O–CH₂⁺
- Q: CH₃–CH₂⁺
- R: F₃C–CH₂⁺
(a) Arrange P, Q and R in order of decreasing stability. (1)
(b) Explain, with a resonance structure, why P is the most stable. (1)
(c) Explain why Q is more stable than R. (1)
- 733 marks
Question 73
A fertiliser company sells a blend of urea, CO(NH₂)₂, and ammonium sulphate, (NH₄)₂SO₄. To check the blend, a sample is analysed by Kjeldahl's method. The ammonia evolved is absorbed in of H₂SO₄, and the unused acid needs of NaOH.
(a) Calculate the percentage of nitrogen in the blend. (Note that the acid and the alkali do not have the same molarity.) (1½)
(b) Calculate the percentage by mass of urea in the blend. (1½)
- 742 marks
Question 74
Carvone gives spearmint chewing gum its flavour. Its bond-line formula is shown.

(a) Work out the molecular formula of carvone, showing how you counted the hydrogen atoms. (1)
(b) How many carbon atoms are sp² hybridised and how many are sp³ hybridised? (1)
- 752 marks
Question 75
In the classroom "nylon rope trick", nylon-6,10 is pulled from the boundary between two solutions containing the monomers
Write the IUPAC names of the two monomers. Explain why the first contains "dec" although only eight groups are written, and why the second keeps the "e" of "hexane".
- 762 marks
Question 76
Rose oil contains 2-phenylethanol, . A student says:
"2-Phenylethanol and benzyl alcohol, , are consecutive members of a homologous series. In the same way, benzyl alcohol and phenol, , are also consecutive homologues, because they too differ by ."
Evaluate each part of the student's statement.
- 772 marks
Question 77
A fine-chemicals plant makes bromodichlorobenzenes, , as intermediates for pesticides. How many isomers of are possible? Write the IUPAC name of each one.
- 782 marks
Question 78
Formamide, HCONH₂, is used as a solvent in the pharmaceutical industry. Its C–N bond is 135 pm long, much shorter than the C–N single bond in methylamine, CH₃NH₂ (147 pm), and its C=O bond is slightly longer than the C=O bond in methanal. Explain both observations using resonance.
- 792 marks
Question 79
A forensic chemist suspects that a seized tablet contains paracetamol. She runs TLC of the tablet extract (T), authentic paracetamol (A) and a co-spot of both (T + A) in two different solvents. The results are shown below.

Calculate the Rf values in both solvents and state, with reasons, what she should conclude.
- 802 marks
Question 80
A pesticide-testing laboratory analyses a sample of glyphosate, C₃H₈NO₅P (molar mass 169 g mol⁻¹). A sample, oxidised with fuming nitric acid, gives of ammonium phosphomolybdate, (NH₄)₃PO₄·12MoO₃ (molar mass 1877 g mol⁻¹).
(a) Calculate the percentage of phosphorus and compare it with the formula. (1)
(b) What mass of Mg₂P₂O₇ (molar mass 222 g mol⁻¹) would the same sample have given? Why is the phosphomolybdate method better for such a small sample? (1)
