Confirming your payment

Skip to content

Opening your dashboard

Class 12 Physics Chapter 2 Electrostatics Potential And Capacitance: Previous Year Questions

38 questions on Chapter 2, each solved step by step. Class 12 Physics, CBSE 2026-27.

38 questions with solutions

1–5 marks · Mixed difficulty

The first 27 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.

  1. 1

    Question 1

    The electric potential on the axis of an electric dipole at a distance rr from its centre is VV. Then the potential at a point at the same distance on its equatorial line will be

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) 2V2V

    • (B) −V-V

    • (C) V2\dfrac{V}{2}

    • (D) zero

      Correct

    Option (D) is correct.

    Explanation: For a short dipole, the potential at a point at distance rr whose position vector makes angle θ\theta with p⃗\vec p is

    V(r,θ)=14πε0 pcos⁡θr2V(r, \theta) = \frac{1}{4\pi\varepsilon_0}\,\frac{p\cos\theta}{r^2}

    On the axis θ=0∘\theta = 0^\circ, which gives the value VV of the question. On the equatorial line θ=90∘\theta = 90^\circ and cos⁡90∘=0\cos 90^\circ = 0, so the potential is zero, whatever the value of rr.

    Class 12 Physics Electrostatics Potential And Capacitance

    The reason is simple: every point of the equatorial plane is equidistant from +q+q and −q-q, so their potentials +kq/r′+kq/r' and −kq/r′-kq/r' cancel exactly. (The field there is not zero; it points parallel to −p⃗-\vec p.)

  2. 2

    Question 2

    The electric potential VV as a function of distance xx is shown in the figure.

    Class 12 Physics Electrostatics Potential And Capacitance

    The graph of the magnitude of electric field intensity EE as a function of xx is

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) Class 12 Physics Electrostatics Potential And Capacitance

      Correct
    • (B) Class 12 Physics Electrostatics Potential And Capacitance

    • (C) Class 12 Physics Electrostatics Potential And Capacitance

    • (D) Class 12 Physics Electrostatics Potential And Capacitance

    Option (A) is correct.

    Explanation: The field is minus the slope of the potential–distance graph:

    E=−dVdxE = -\frac{dV}{dx}

    Each straight segment of the VV–xx graph has a constant slope, so EE is constant on each segment:

    RegionSlope of VV–xxE=−dVdxE = -\dfrac{dV}{dx}
    0<x<20 < x < 2positive (V rises)constant, negative (−E-E)
    2<x<42 < x < 4zero (V flat)zero
    4<x<64 < x < 6negative (V falls)constant, positive (+E+E)

    The two sloping segments have equal steepness, so the two non-zero values are equal in size. Only graph (A) shows −E-E, then 00, then +E+E.

    (Graph (B) wrongly makes EE change linearly: that would need a curved VV–xx graph. Graphs (C) and (D) have the signs reversed or the zero region misplaced.)

    Note: the question says "magnitude", but a magnitude cannot be negative. As in all four option graphs, the graph intended is that of the xx-component of EE, with its sign.

  3. 3

    Question 3

    A variable capacitor is connected to a 200 V battery. If its capacitance is changed from 2 μF2\ \mu\text{F} to X μFX\ \mu\text{F}, the decrease in energy of the capacitor is 2×10−2 J2 \times 10^{-2}\ \text{J}. The value of XX is

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) 1 μF1\ \mu\text{F}

      Correct
    • (B) 2 μF2\ \mu\text{F}

    • (C) 3 μF3\ \mu\text{F}

    • (D) 4 μF4\ \mu\text{F}

    Option (A) is correct.

    Explanation: The battery stays connected, so V=200V = 200 V is fixed and U=12CV2U = \frac{1}{2}CV^2 changes only through CC:

    ΔU=12(C1−C2)V2\Delta U = \frac{1}{2}(C_1 - C_2)V^2

    2×10−2=12(C1−C2)(200)2⇒C1−C2=4×10−24×104=1×10−6 F2 \times 10^{-2} = \frac{1}{2}(C_1 - C_2)(200)^2 \quad\Rightarrow\quad C_1 - C_2 = \frac{4 \times 10^{-2}}{4 \times 10^{4}} = 1 \times 10^{-6}\ \text{F}

    2 μF−X=1 μF⇒X=1 μF2\ \mu\text{F} - X = 1\ \mu\text{F} \quad\Rightarrow\quad X = 1\ \mu\text{F}

    The energy decreased, so the capacitance must have decreased (at fixed VV, U∝CU \propto C). That rules out (C) and (D) at once.

  4. 4

    Question 4

    Equipotentials at a large distance from a collection of charges whose total sum is not zero are

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) spheres

      Correct
    • (B) planes

    • (C) ellipsoids

    • (D) paraboloids

    Option (A) is correct.

    Explanation: Seen from far away (distance much larger than the size of the collection), a group of charges with net charge Q≠0Q \neq 0 looks like a single point charge QQ. Its potential is

    V≈14πε0 QrV \approx \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{r}

    which depends only on the distance rr. All points at the same rr have the same potential, and the locus of such points is a sphere.

    Class 12 Physics Electrostatics Potential And Capacitance

    Near the charges the equipotentials are distorted by the individual charges, but they become more and more nearly spherical as you move out.

  5. 5

    Question 5

    Four charges −q-q, −q-q, +q+q and +q+q are placed at the corners of a square of side 2L2L as shown in the figure. The electric potential at point A, midway between the two charges +q+q and +q+q, is

    Class 12 Physics Electrostatics Potential And Capacitance

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) 14πε0⋅2qL(1−15)\dfrac{1}{4\pi\varepsilon_0}\cdot\dfrac{2q}{L}\left(1 - \dfrac{1}{\sqrt 5}\right)

      Correct
    • (B) 14πε0⋅2qL(1+15)\dfrac{1}{4\pi\varepsilon_0}\cdot\dfrac{2q}{L}\left(1 + \dfrac{1}{\sqrt 5}\right)

    • (C) 14πε0⋅q2L(1−15)\dfrac{1}{4\pi\varepsilon_0}\cdot\dfrac{q}{2L}\left(1 - \dfrac{1}{\sqrt 5}\right)

    • (D) zero

    Option (A) is correct.

    Explanation: Potential is a scalar, so add the four contributions using distances only.

    • Each +q+q is at distance LL from A (A is the midpoint of that side).
    • Each −q-q is at distance (2L)2+L2=5 L\sqrt{(2L)^2 + L^2} = \sqrt 5\,L from A.

    Class 12 Physics Electrostatics Potential And Capacitance

    VA=14πε0[qL+qL−q5L−q5L]=14πε0⋅2qL(1−15)V_A = \frac{1}{4\pi\varepsilon_0}\left[\frac{q}{L} + \frac{q}{L} - \frac{q}{\sqrt5 L} - \frac{q}{\sqrt5 L}\right] = \frac{1}{4\pi\varepsilon_0}\cdot\frac{2q}{L}\left(1 - \frac{1}{\sqrt5}\right)

    The answer is positive because the positive charges are closer to A. It cannot be zero (D).

  6. 6

    Question 6

    Which of the following is not a property of an equipotential surface?

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) They do not cross each other.

    • (B) The work done in carrying a charge from one point to another on an equipotential surface is zero.

    • (C) For a uniform electric field, they are concentric spheres.

      Correct
    • (D) They can be imaginary spheres.

    Option (C) is correct.

    Explanation: Check each statement.

    • (A) True. If two equipotentials crossed, the crossing point would have two different potentials and two different field directions. That is impossible.
    • (B) True. W=q(VB−VA)=0W = q(V_B - V_A) = 0 when VA=VBV_A = V_B.
    • (C) False. In a uniform field the equipotentials are parallel planes perpendicular to the field. Concentric spheres belong to a point charge.
    • (D) True. Equipotential surfaces are imaginary surfaces; around a point charge they are spheres.

    Class 12 Physics Electrostatics Potential And Capacitance

  7. 7

    Question 7

    An electric dipole placed in an electric field of intensity 2×105 N/C2 \times 10^{5}\ \text{N/C} at an angle of 30∘30^\circ experiences a torque equal to 4 N m. The charge on the dipole of dipole length 2 cm is

    MCQEasyAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 7 mC

    • (B) 8 mC

    • (C) 2 mC

      Correct
    • (D) 5 mC

    Option (C) is correct.

    Explanation: The torque on a dipole in a uniform field is τ=pEsin⁡θ\tau = pE\sin\theta, with p=q(2a)p = q(2a):

    q=τ(2a)Esin⁡θ=4(2×10−2)(2×105)sin⁡30∘q = \frac{\tau}{(2a)E\sin\theta} = \frac{4}{(2 \times 10^{-2})(2 \times 10^{5})\sin 30^\circ}

    q=4(2×10−2)(2×105)(0.5)=42×103=2×10−3 C=2 mCq = \frac{4}{(2 \times 10^{-2})(2 \times 10^{5})(0.5)} = \frac{4}{2 \times 10^{3}} = 2 \times 10^{-3}\ \text{C} = 2\ \text{mC}

  8. 8

    Question 8

    An electric dipole of length 2 cm is placed at an angle of 30∘30^\circ with an electric field 2×105 N/C2 \times 10^{5}\ \text{N/C}. If the dipole experiences a torque of 8×10−3 N m8 \times 10^{-3}\ \text{N m}, the magnitude of either charge of the dipole is

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 4 μC4\ \mu\text{C}

      Correct
    • (B) 7 μC7\ \mu\text{C}

    • (C) 8 mC

    • (D) 2 mC

    Option (A) is correct.

    Explanation: Given τ=8×10−3\tau = 8 \times 10^{-3} N m, E=2×105E = 2 \times 10^{5} N/C, θ=30∘\theta = 30^\circ and 2a=2×10−22a = 2 \times 10^{-2} m.

    τ=pEsin⁡θ=q(2a)Esin⁡θ⇒q=τ(2a)Esin⁡θ\tau = pE\sin\theta = q(2a)E\sin\theta \quad\Rightarrow\quad q = \frac{\tau}{(2a)E\sin\theta}

    q=8×10−3(2×10−2)(2×105)(0.5)=8×10−32×103=4×10−6 C=4 μCq = \frac{8 \times 10^{-3}}{(2 \times 10^{-2})(2 \times 10^{5})(0.5)} = \frac{8 \times 10^{-3}}{2 \times 10^{3}} = 4 \times 10^{-6}\ \text{C} = 4\ \mu\text{C}

  9. 9

    Question 9

    Three capacitors, each of 4 μF4\ \mu\text{F}, are to be connected in such a way that the effective capacitance of the combination is 6 μF6\ \mu\text{F}. This can be achieved by connecting

    MCQEasyAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) all three in parallel

    • (B) all three in series

    • (C) two of them in series and the combination in parallel to the third

      Correct
    • (D) two of them in parallel and the combination in series to the third

    Option (C) is correct.

    Explanation: Work out each option.

    ArrangementEffective capacitance
    (A) all in parallel4+4+4=12 μ4 + 4 + 4 = 12\ \muF
    (B) all in series4/3≈1.33 μ4/3 \approx 1.33\ \muF
    (C) (two in series) ∥ third2+4=6 μ2 + 4 = 6\ \muF ✔
    (D) (two in parallel) in series with third8×48+4=83≈2.67 μ\dfrac{8 \times 4}{8 + 4} = \dfrac{8}{3} \approx 2.67\ \muF

    Class 12 Physics Electrostatics Potential And Capacitance

    Two 4 μ4\ \muF in series give 4×44+4=2 μ\dfrac{4 \times 4}{4 + 4} = 2\ \muF; adding 4 μ4\ \muF in parallel gives 6 μ6\ \muF.

  10. 10

    Question 10

    A point PP lies at a distance xx from the midpoint of an electric dipole on its axis. The electric potential at point PP is proportional to

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 1x2\dfrac{1}{x^{2}}

      Correct
    • (B) 1x3\dfrac{1}{x^{3}}

    • (C) 1x4\dfrac{1}{x^{4}}

    • (D) 1x1/2\dfrac{1}{x^{1/2}}

    Option (A) is correct.

    Explanation: Let the dipole have charges ±q\pm q separated by 2a2a. At P on the axis, P is (x−a)(x - a) from +q+q and (x+a)(x + a) from −q-q:

    V=q4πε0[1x−a−1x+a]=14πε0 px2−a2V = \frac{q}{4\pi\varepsilon_0}\left[\frac{1}{x - a} - \frac{1}{x + a}\right] = \frac{1}{4\pi\varepsilon_0}\,\frac{p}{x^2 - a^2}

    For a point far from the dipole (x≫ax \gg a), x2−a2≈x2x^2 - a^2 \approx x^2, so

    V≈14πε0 px2⇒V∝1x2V \approx \frac{1}{4\pi\varepsilon_0}\,\frac{p}{x^2} \quad\Rightarrow\quad V \propto \frac{1}{x^2}

    Do not confuse this with the dipole field, which falls off faster, as 1/x31/x^3 (option B).

  11. 11

    Question 11

    An electric dipole of dipole moment 2×10−8 C m2 \times 10^{-8}\ \text{C m} in a uniform electric field experiences a maximum torque of 6×10−4 N m6 \times 10^{-4}\ \text{N m}. The magnitude of the electric field is

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 2.2×103 V m−12.2 \times 10^{3}\ \text{V m}^{-1}

    • (B) 1.2×101 V m−11.2 \times 10^{1}\ \text{V m}^{-1}

    • (C) 3.0×104 V m−13.0 \times 10^{4}\ \text{V m}^{-1}

      Correct
    • (D) 4.2×103 V m−14.2 \times 10^{3}\ \text{V m}^{-1}

    Option (C) is correct.

    Explanation: The torque τ=pEsin⁡θ\tau = pE\sin\theta is maximum when θ=90∘\theta = 90^\circ (dipole perpendicular to the field), so τmax⁡=pE\tau_{\max} = pE:

    E=τmax⁡p=6×10−42×10−8=3.0×104 V m−1E = \frac{\tau_{\max}}{p} = \frac{6 \times 10^{-4}}{2 \times 10^{-8}} = 3.0 \times 10^{4}\ \text{V m}^{-1}

  12. 12

    Question 12

    An electric dipole having a dipole moment of 4×10−9 C m4 \times 10^{-9}\ \text{C m} is placed in a uniform electric field such that the dipole is in stable equilibrium. If the magnitude of the electric field is 3×103 N/C3 \times 10^{3}\ \text{N/C}, what is the work done in rotating the dipole to a position of unstable equilibrium?

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) zero

    • (B) 1.2×10−5 J1.2 \times 10^{-5}\ \text{J}

    • (C) 2.4×10−5 J2.4 \times 10^{-5}\ \text{J}

      Correct
    • (D) −1.2×10−5 J-1.2 \times 10^{-5}\ \text{J}

    Option (C) is correct.

    Explanation: The potential energy of a dipole in a uniform field is U=−pEcos⁡θU = -pE\cos\theta.

    • Stable equilibrium, θ=0∘\theta = 0^\circ:  U1=−pE\ U_1 = -pE.
    • Unstable equilibrium, θ=180∘\theta = 180^\circ:  U2=+pE\ U_2 = +pE.

    Class 12 Physics Electrostatics Potential And Capacitance

    The work done (by the external agent, rotating slowly) equals the gain in potential energy:

    W=U2−U1=pE−(−pE)=2pEW = U_2 - U_1 = pE - (-pE) = 2pE

    W=2(4×10−9)(3×103)=2.4×10−5 JW = 2(4 \times 10^{-9})(3 \times 10^{3}) = 2.4 \times 10^{-5}\ \text{J}

  13. 13

    Question 13

    At what rate does the electric field change between the plates of a square capacitor of side 5 cm, if the plates are spaced 1.2 mm apart and the voltage across them is changing at a rate of 60 V/s60\ \text{V/s}?

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 7.2×10−2 V m−1 s−17.2 \times 10^{-2}\ \text{V m}^{-1}\,\text{s}^{-1}

    • (B) 30×10−1 V m−1 s−130 \times 10^{-1}\ \text{V m}^{-1}\,\text{s}^{-1}

    • (C) 12×102 V m−1 s−112 \times 10^{2}\ \text{V m}^{-1}\,\text{s}^{-1}

    • (D) 5×104 V m−1 s−15 \times 10^{4}\ \text{V m}^{-1}\,\text{s}^{-1}

      Correct

    Option (D) is correct.

    Explanation: Between the plates the field is uniform: E=VdE = \dfrac{V}{d}. The separation dd is fixed, so differentiate with respect to time:

    dEdt=1d dVdt=60 V/s1.2×10−3 m=5×104 V m−1 s−1\frac{dE}{dt} = \frac{1}{d}\,\frac{dV}{dt} = \frac{60\ \text{V/s}}{1.2 \times 10^{-3}\ \text{m}} = 5 \times 10^{4}\ \text{V m}^{-1}\,\text{s}^{-1}

    The side of the plates (5 cm) is not needed: the field of a parallel plate capacitor depends on VV and dd only.

  14. 14

    Question 14

    Find the total charge stored in the network of capacitors connected between A and B, as shown in the figure.

    Class 12 Physics Electrostatics Potential And Capacitance

    MCQMediumAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) 10 μC10\ \mu\text{C}

      Correct
    • (B) 15 μC15\ \mu\text{C}

    • (C) 20 μC20\ \mu\text{C}

    • (D) 5 μC5\ \mu\text{C}

    Option (A) is correct.

    Explanation: There are two branches between A and B, each with two capacitors in series.

    Upper branch (4 μ4\ \muF and 2 μ2\ \muF in series):

    C1=4×24+2=43 μFC_1 = \frac{4 \times 2}{4 + 2} = \frac{4}{3}\ \mu\text{F}

    Lower branch (6 μ6\ \muF and 3 μ3\ \muF in series):

    C2=6×36+3=2 μFC_2 = \frac{6 \times 3}{6 + 3} = 2\ \mu\text{F}

    The two branches are in parallel across the 3 V battery:

    CAB=43+2=103 μFC_{AB} = \frac{4}{3} + 2 = \frac{10}{3}\ \mu\text{F}

    Class 12 Physics Electrostatics Potential And Capacitance

    Q=CABV=103 μF×3 V=10 μCQ = C_{AB}V = \frac{10}{3}\ \mu\text{F} \times 3\ \text{V} = 10\ \mu\text{C}

    (Check: the upper branch holds 43×3=4 μ\frac{4}{3} \times 3 = 4\ \muC and the lower 2×3=6 μ2 \times 3 = 6\ \muC; 4+6=10 μ4 + 6 = 10\ \muC.)

  15. 15

    Question 15

    A supercapacitor makes a bridge between

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) an electrolytic capacitor and a rechargeable battery

      Correct
    • (B) a single-use battery and an electrolytic capacitor

    • (C) an electrolytic capacitor and a dynamo

    • (D) electrolytic and non-electrolytic capacitors

    Option (A) is correct.

    Explanation: A supercapacitor (ultracapacitor) has properties between those of two devices:

    DeviceStores energyStrength
    Electrolytic capacitorelectrostaticallyvery fast charge and discharge (high power)
    Rechargeable batterychemicallystores a lot of energy (high energy density)

    A supercapacitor stores far more energy than an ordinary capacitor, yet charges and discharges much faster, and survives many more cycles, than a battery. It therefore bridges the gap between the electrolytic capacitor and the rechargeable battery.

  16. 16

    Question 16

    Deduce an expression for the potential energy of a system of two point charges q1q_1 and q2q_2 located at positions r⃗1\vec r_1 and r⃗2\vec r_2 respectively in an external field E⃗\vec E.

    MediumAsked 2020
    2 marks
    Solve with AI
    Written solution

    Let V(r⃗)V(\vec r) be the potential of the external field. Build the system by bringing the charges in from infinity, one at a time, and add up the work done.

    Class 12 Physics Electrostatics Potential And Capacitance

    Step 1 — bring q1q_1 to r⃗1\vec r_1. Only the external field acts on it:

    W1=q1V(r⃗1)W_1 = q_1 V(\vec r_1)

    Step 2 — bring q2q_2 to r⃗2\vec r_2. Now work is done against the external field and against the field of q1q_1:

    W2=q2V(r⃗2)+14πε0 q1q2r12W_2 = q_2 V(\vec r_2) + \frac{1}{4\pi\varepsilon_0}\,\frac{q_1 q_2}{r_{12}}

    where r12=∣r⃗2−r⃗1∣r_{12} = |\vec r_2 - \vec r_1| is the distance between the charges.

    Total potential energy (the total work stored in the system):

    U=q1V(r⃗1)+q2V(r⃗2)+14πε0 q1q2r12U = q_1 V(\vec r_1) + q_2 V(\vec r_2) + \frac{1}{4\pi\varepsilon_0}\,\frac{q_1 q_2}{r_{12}}

    The first two terms are the energies of each charge in the external field; the last term is the mutual interaction energy of the pair.

  17. 17

    Question 17

    Establish the relation between electric field and electric potential at a point.

    Draw the equipotential surfaces for an electric field pointing in the +z+z direction, with its magnitude increasing at a constant rate along the −z-z direction.

    MediumAsked 2020
    2 marks
    Solve with AI
    Written solution

    Relation between EE and VV

    Let A and B be two points a small distance drdr apart, along the direction of the field E⃗\vec E. Because drdr is small, EE may be taken as uniform between A and B.

    Class 12 Physics Electrostatics Potential And Capacitance

    The force on a unit positive charge is EE (along AB). To move it slowly from A to B, an external agent must apply a force EE directed opposite to the field, so the work done by the agent is

    dW=−E drdW = -E\,dr

    This work equals the potential difference between B and A:

    dV=VB−VA=−E dr⇒E=−dVdrdV = V_B - V_A = -E\,dr \quad\Rightarrow\quad E = -\frac{dV}{dr}

    The field equals the negative potential gradient: it points in the direction in which the potential decreases fastest.

    Equipotential surfaces for the given field

    Since E⃗\vec E is along +z+z, the equipotentials are planes perpendicular to the zz-axis (parallel to the xyxy-plane), and VV decreases along +z+z.

    The field is stronger towards −z-z and weaker towards +z+z. From dr=dVEdr = \dfrac{dV}{E}, for equal steps of potential the surfaces must be closer together where EE is large (towards −z-z) and further apart where EE is small (towards +z+z).

    Class 12 Physics Electrostatics Potential And Capacitance

  18. 18

    Question 18

    Depict the orientation of an electric dipole in (a) stable and (b) unstable equilibrium in an external uniform electric field. Write the potential energy of the dipole in each case.

    HardAsked 2023
    2 marks
    Solve with AI
    Written solution

    The potential energy of a dipole p⃗\vec p in a uniform field E⃗\vec E is

    U=−p⃗⋅E⃗=−pEcos⁡θU = -\vec p \cdot \vec E = -pE\cos\theta

    where θ\theta is the angle between p⃗\vec p and E⃗\vec E. In both cases below the torque τ=pEsin⁡θ\tau = pE\sin\theta is zero, so the dipole is in equilibrium.

    Class 12 Physics Electrostatics Potential And Capacitance

    (a) Stable equilibrium: p⃗\vec p parallel to E⃗\vec E (θ=0∘\theta = 0^\circ).

    Ustable=−pEcos⁡0∘=−pE(minimum)U_{\text{stable}} = -pE\cos 0^\circ = -pE \quad \text{(minimum)}

    If the dipole is turned slightly, the torque turns it back.

    (b) Unstable equilibrium: p⃗\vec p antiparallel to E⃗\vec E (θ=180∘\theta = 180^\circ).

    Uunstable=−pEcos⁡180∘=+pE(maximum)U_{\text{unstable}} = -pE\cos 180^\circ = +pE \quad \text{(maximum)}

    If the dipole is turned slightly, the torque turns it further away, towards the stable position.

  19. 19

    Question 19

    Draw a plot showing the variation of (i) electric field (E)(E) and (ii) electric potential (V)(V) with distance rr due to a point charge.

    MediumAsked 2019
    2 marks
    Solve with AI
    Written solution

    For a point charge QQ:

    E=14πε0 Qr2⇒E∝1r2E = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{r^2} \quad\Rightarrow\quad E \propto \frac{1}{r^2}

    V=14πε0 Qr⇒V∝1rV = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{r} \quad\Rightarrow\quad V \propto \frac{1}{r}

    Class 12 Physics Electrostatics Potential And Capacitance

    Both fall as rr increases, but EE falls faster: doubling rr reduces VV to one-half but EE to one-quarter. (For Q>0Q > 0 both graphs lie above the axis.)

  20. 20

    Question 20

    An electric dipole of dipole moment p⃗\vec p is kept in a uniform electric field E⃗\vec E. Show graphically the variation of the torque (τ)(\tau) acting on the dipole with its orientation (θ)(\theta) in the field. Find the orientation in which the torque is (i) zero and (ii) maximum.

    MediumAsked 2023
    2 marks
    Solve with AI
    Written solution

    The torque on the dipole is

    τ=pEsin⁡θ\tau = pE\sin\theta

    so the graph of τ\tau against θ\theta is a sine curve of amplitude pEpE.

    Class 12 Physics Electrostatics Potential And Capacitance

    (i) Torque is zero when sin⁡θ=0\sin\theta = 0, i.e. θ=0∘\theta = 0^\circ (p⃗\vec p parallel to E⃗\vec E) or θ=180∘\theta = 180^\circ (p⃗\vec p antiparallel to E⃗\vec E).

    (ii) Torque is maximum, τmax⁡=pE\tau_{\max} = pE, when sin⁡θ=1\sin\theta = 1, i.e. θ=90∘\theta = 90^\circ (p⃗\vec p perpendicular to E⃗\vec E).

  21. 21

    Question 21

    Three point charges QQ, qq and −q-q are kept at the vertices of an equilateral triangle of side LL as shown in the figure. D is the midpoint of the side joining qq and −q-q. What is

    Class 12 Physics Electrostatics Potential And Capacitance

    (i) the electrostatic potential energy of the arrangement, and

    (ii) the potential at point D?

    HardAsked 2023
    2 marks
    Solve with AI
    Written solution

    (i) Potential energy. Add the energy of each of the three pairs; every pair is a distance LL apart:

    U=14πε0[(q)(−q)L+(Q)(q)L+(Q)(−q)L]U = \frac{1}{4\pi\varepsilon_0}\left[\frac{(q)(-q)}{L} + \frac{(Q)(q)}{L} + \frac{(Q)(-q)}{L}\right]

    The two terms containing QQ cancel, leaving

    U=−14πε0 q2LU = -\frac{1}{4\pi\varepsilon_0}\,\frac{q^2}{L}

    The energy is negative: work would have to be done to pull the charges apart.

    (ii) Potential at D. D is L/2L/2 from both qq and −q-q, and its distance from QQ is the height of the triangle, 32L\dfrac{\sqrt3}{2}L.

    Class 12 Physics Electrostatics Potential And Capacitance

    VD=14πε0[qL/2+−qL/2+Q3L/2]=14πε0 2Q3 LV_D = \frac{1}{4\pi\varepsilon_0}\left[\frac{q}{L/2} + \frac{-q}{L/2} + \frac{Q}{\sqrt3 L/2}\right] = \frac{1}{4\pi\varepsilon_0}\,\frac{2Q}{\sqrt3\,L}

    The potentials of qq and −q-q cancel at D because D is equidistant from them.

  22. 22

    Question 22

    Three charges −q-q, QQ and −q-q are placed at equal distances on a straight line. If the potential energy of the system of these charges is zero, then what is the ratio Q:qQ : q?

    MediumAsked 2022
    2 marks
    Solve with AI
    Written solution

    Concept used — potential energy of a system of point charges

    The electrostatic potential energy of a system of charges is the work needed to assemble it from infinity. It is the sum of the energies of every pair of charges:

    U=∑pairs14πε0 qiqjrijU = \sum_{\text{pairs}} \frac{1}{4\pi\varepsilon_0}\,\frac{q_i q_j}{r_{ij}}

    Three charges make three pairs. Write k=14πε0k = \dfrac{1}{4\pi\varepsilon_0}.

    Given: −q-q, QQ and −q-q on a straight line, equally spaced. Let the spacing be xx, so the two outer charges are 2x2x apart. To find: Q:qQ : q when U=0U = 0.

    Class 12 Physics Electrostatics Potential And Capacitance

    Step 1 — List the three pairs.

    PairProduct of chargesSeparation
    left −q-q and QQ−qQ-qQxx
    QQ and right −q-q−qQ-qQxx
    left −q-q and right −q-q(−q)(−q)=+q2(-q)(-q) = +q^22x2x

    Step 2 — Add the pair energies.

    U=k[−qQx+−qQx+q22x]=kx[−2qQ+q22]U = k\left[\frac{-qQ}{x} + \frac{-qQ}{x} + \frac{q^2}{2x}\right] = \frac{k}{x}\left[-2qQ + \frac{q^2}{2}\right]

    Step 3 — Put U=0U = 0 and solve. Since kx≠0\dfrac{k}{x} \neq 0, the bracket must vanish:

    −2qQ+q22=0⇒q22=2qQ-2qQ + \frac{q^2}{2} = 0 \quad\Rightarrow\quad \frac{q^2}{2} = 2qQ

    Divide both sides by qq (which is not zero):

    q2=2Q⇒q=4Q\frac{q}{2} = 2Q \quad\Rightarrow\quad q = 4Q Qq=14\frac{Q}{q} = \frac{1}{4}

    Answer: Q:q=1:4Q : q = 1 : 4.

    Note: QQ must be positive. The two attractive pairs (QQ with each −q-q) then have negative energy, which exactly cancels the positive energy of the one repulsive pair (the two −q-q charges). A negative QQ would make all three terms positive, and UU could never be zero.

  23. 23

    Question 23

    (a) Derive an expression for the potential energy of a two-charge system placed in the zyzy-plane.

    (b) If an external electric field EE is applied on the system, write the expression for the total energy of this system.

    MediumAsked 2020
    3 marks
    Solve with AI
    Written solution

    Class 12 Physics Electrostatics Potential And Capacitance

    (a) No external field. Bring the charges from infinity one at a time.

    • Bringing q1q_1 to r⃗1\vec r_1 needs no work: there is no field yet.
    • q1q_1 now produces a potential V=14πε0q1r12V = \dfrac{1}{4\pi\varepsilon_0}\dfrac{q_1}{r_{12}} at r⃗2\vec r_2, so bringing q2q_2 there needs work q2Vq_2 V.

    U=14πε0 q1q2r12U = \frac{1}{4\pi\varepsilon_0}\,\frac{q_1 q_2}{r_{12}}

    where r12r_{12} is the distance between the charges. The result does not depend on the order in which the charges are brought in.

    (b) In an external field with potential V(r⃗)V(\vec r), each charge also gains energy in that field:

    U=q1V(r⃗1)+q2V(r⃗2)+14πε0 q1q2r12U = q_1 V(\vec r_1) + q_2 V(\vec r_2) + \frac{1}{4\pi\varepsilon_0}\,\frac{q_1 q_2}{r_{12}}

  24. 24

    Question 24

    Four point charges QQ, qq, QQ and qq are placed at the corners of a square of side aa as shown in the figure.

    Class 12 Physics Electrostatics Potential And Capacitance

    Find the

    (i) resultant electric force on a charge QQ, and

    (ii) potential energy of this system.

    HardAsked 2018
    3 marks
    Solve with AI
    Written solution

    (i) Force on the charge QQ at C (take all charges positive; the forces are then repulsive).

    Class 12 Physics Electrostatics Potential And Capacitance

    • From QQ at A (distance a2a\sqrt2, along the diagonal AC, away from A):

    F1=14πε0 Q22a2F_1 = \frac{1}{4\pi\varepsilon_0}\,\frac{Q^2}{2a^2}

    • From qq at B and qq at D (distance aa each, along BC and DC):

    F2=F3=14πε0 qQa2F_2 = F_3 = \frac{1}{4\pi\varepsilon_0}\,\frac{qQ}{a^2}

    F2F_2 and F3F_3 are at right angles, so their resultant is 2F2\sqrt2 F_2, and it points along the diagonal AC, the same direction as F1F_1:

    F23=14πε0 2 qQa2F_{23} = \frac{1}{4\pi\varepsilon_0}\,\frac{\sqrt2\,qQ}{a^2}

    All the forces now lie along AC, so they add directly:

    F=F1+F23=14πε0 Qa2[Q2+2 q]F = F_1 + F_{23} = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{a^2}\left[\frac{Q}{2} + \sqrt2\,q\right]

    directed along AC, away from A. (By symmetry, the other QQ at A feels the same magnitude, directed along CA.)

    (ii) Potential energy. A square of four charges has six pairs: four sides and two diagonals.

    PairsNumberSeparationEnergy
    QQ–qq (sides)4aa4 qQa4\,\dfrac{qQ}{a}
    QQ–QQ (diagonal)1a2a\sqrt2Q22 a\dfrac{Q^2}{\sqrt2\,a}
    qq–qq (diagonal)1a2a\sqrt2q22 a\dfrac{q^2}{\sqrt2\,a}

    U=14πε0 a[4qQ+Q22+q22]U = \frac{1}{4\pi\varepsilon_0\,a}\left[4qQ + \frac{Q^2}{\sqrt2} + \frac{q^2}{\sqrt2}\right]

  25. 25

    Question 25

    (i) Three point charges qq, −4q-4q and 2q2q are placed at the vertices of an equilateral triangle ABC of side ll, as shown in the figure. Obtain the expression for the magnitude of the resultant electric force acting on the charge qq.

    (ii) Find out the amount of work done to separate the charges to infinite distance.

    Class 12 Physics Electrostatics Potential And Capacitance

    HardAsked 2018
    3 marks
    Solve with AI
    Written solution

    (i) Forces on qq (at A)

    • From −4q-4q at B: attraction, along AB towards B,

    F1=14πε0 4q2l2F_1 = \frac{1}{4\pi\varepsilon_0}\,\frac{4q^2}{l^2}

    • From 2q2q at C: repulsion, along CA, pointing away from C,

    F2=14πε0 2q2l2F_2 = \frac{1}{4\pi\varepsilon_0}\,\frac{2q^2}{l^2}

    Class 12 Physics Electrostatics Potential And Capacitance

    The directions AB and AC make 60∘60^\circ, so F1F_1 (towards B) and F2F_2 (away from C) make 180∘−60∘=120∘180^\circ - 60^\circ = 120^\circ with each other:

    F=F12+F22+2F1F2cos⁡120∘=F12+F22−F1F2F = \sqrt{F_1^2 + F_2^2 + 2F_1F_2\cos120^\circ} = \sqrt{F_1^2 + F_2^2 - F_1F_2}

    F=14πε0 q2l216+4−8=14πε0 23 q2l2F = \frac{1}{4\pi\varepsilon_0}\,\frac{q^2}{l^2}\sqrt{16 + 4 - 8} = \frac{1}{4\pi\varepsilon_0}\,\frac{2\sqrt3\,q^2}{l^2}

    (ii) Work to separate the charges

    U=14πε0 l[(q)(−4q)+(q)(2q)+(−4q)(2q)]=14πε0 q2l(−4+2−8)=−10 q24πε0 lU = \frac{1}{4\pi\varepsilon_0\,l}\left[(q)(-4q) + (q)(2q) + (-4q)(2q)\right] = \frac{1}{4\pi\varepsilon_0}\,\frac{q^2}{l}(-4 + 2 - 8) = -\frac{10\,q^2}{4\pi\varepsilon_0\,l}

    Separating the charges to infinity brings the energy to zero, so the work required is

    W=0−U=10 q24πε0 l=5 q22πε0 lW = 0 - U = \frac{10\,q^2}{4\pi\varepsilon_0\,l} = \frac{5\,q^2}{2\pi\varepsilon_0\,l}

  26. 26

    Question 26

    (i) Derive the expression for the electric potential due to an electric dipole at a point on its axial line.

    (ii) Depict the equipotential surfaces due to an electric dipole.

    HardAsked 2017
    3 marks
    Solve with AI
    Written solution

    (i) Potential on the axial line

    A dipole has charges −q-q at A and +q+q at B, separated by 2a2a, so p=q(2a)p = q(2a). Let P be on the axis, at distance rr from the centre O, on the side of +q+q.

    Class 12 Physics Electrostatics Potential And Capacitance

    P is at distance (r−a)(r - a) from +q+q and (r+a)(r + a) from −q-q:

    V=14πε0[qr−a−qr+a]=q4πε0⋅2ar2−a2V = \frac{1}{4\pi\varepsilon_0}\left[\frac{q}{r - a} - \frac{q}{r + a}\right] = \frac{q}{4\pi\varepsilon_0}\cdot\frac{2a}{r^2 - a^2}

    V=14πε0 pr2−a2V = \frac{1}{4\pi\varepsilon_0}\,\frac{p}{r^2 - a^2}

    For a short dipole (r≫ar \gg a):

    V≈14πε0 pr2V \approx \frac{1}{4\pi\varepsilon_0}\,\frac{p}{r^2}

    (ii) Equipotential surfaces of a dipole

    Class 12 Physics Electrostatics Potential And Capacitance

    • Near each charge the equipotentials are nearly spheres around that charge; they are not closed curves around both charges.
    • The perpendicular bisector plane of the dipole is the equipotential V=0V = 0.
    • The equipotentials are perpendicular to the field lines everywhere.
  27. 27

    Question 27

    Charges +q+q and −q-q are placed at the points A and B respectively, which are a distance 2L2L apart. C is the midpoint between A and B. What is the work done in moving a charge +Q+Q along the semicircle CRD?

    Class 12 Physics Electrostatics Potential And Capacitance

    HardAsked 2023
    3 marks
    Solve with AI
    Written solution

    The electrostatic force is conservative, so the work depends only on the end points C and D, not on the semicircular path:

    W=Q(VD−VC)W = Q(V_D - V_C)

    Class 12 Physics Electrostatics Potential And Capacitance

    Potential at C. C is at distance LL from both charges:

    VC=14πε0[qL−qL]=0V_C = \frac{1}{4\pi\varepsilon_0}\left[\frac{q}{L} - \frac{q}{L}\right] = 0

    Potential at D. D is 3L3L from A (+q+q) and LL from B (−q-q):

    VD=14πε0[q3L−qL]=−14πε0 2q3L=−q6πε0LV_D = \frac{1}{4\pi\varepsilon_0}\left[\frac{q}{3L} - \frac{q}{L}\right] = -\frac{1}{4\pi\varepsilon_0}\,\frac{2q}{3L} = -\frac{q}{6\pi\varepsilon_0 L}

    Work done

    W=Q(VD−VC)=−qQ6πε0LW = Q(V_D - V_C) = -\frac{qQ}{6\pi\varepsilon_0 L}

    The work is negative: the field itself does positive work, pulling +Q+Q towards the negative charge.

  28. 28

    Question 28

    A conducting wire connects two charged conducting spheres such that they attain equilibrium with respect to each other. The distance of separation between the two spheres is very large as compared to either of their radii.

    Class 12 Physics Electrostatics Potential And Capacitance

    Find the ratio of the magnitudes of the electric fields at the surfaces of the two spheres.

    HardAsked 2019
    2 marks
  29. 29

    Question 29

    The figure shows the variation of charge qq versus potential difference VV for two capacitors C1C_1 and C2C_2. Both capacitors have the same plate separation, but the plate area of C2C_2 is greater than that of C1C_1. Which line (A or B) corresponds to C1C_1, and why?

    Class 12 Physics Electrostatics Potential And Capacitance

    HardAsked 2020
    2 marks
  30. 30

    Question 30

    A 200 μF200\ \mu\text{F} parallel plate capacitor having plate separation of 5 mm is charged by a 100 V dc source. It remains connected to the source. Using an insulated handle, the distance between the plates is doubled and a dielectric slab of thickness 5 mm and dielectric constant 10 is introduced between the plates. Explain with reason, how the (i) capacitance, (ii) electric field between the plates, (iii) energy density of the capacitor will change?

    HardAsked 2019
    3 marks
  31. 31

    Question 31

    Given are two charges: q1q_1, a negative source charge, and q2q_2, a test charge. The test charge q2q_2 is initially positive and is then changed into a negative charge of the same magnitude.

    Class 12 Physics Electrostatics Potential And Capacitance

    (a) Will the potential at the position of q2q_2 due to the source charge q1q_1 (i) remain the same, (ii) increase, or (iii) decrease?

    (b) Will the potential energy of the q1q_1–q2q_2 system (i) remain the same, (ii) increase, or (iii) decrease?

    Give an explanation in each case.

    MediumAsked 2020
    3 marks
  32. 32

    Question 32

    (a) Two charged conducting spheres of radii aa and bb are connected to each other by a wire. Find the ratio of the electric fields at their surfaces.

    (b) A parallel plate capacitor (A) of capacitance CC is charged by a battery to voltage VV. The battery is disconnected and an uncharged capacitor (B) of capacitance 2C2C is connected across A. Find the ratio of

    (i) final charges on A and B.

    (ii) total electrostatic energy stored in A and B finally and that stored in A initially.

    HardAsked 2023
    3 marks
  33. 33

    Question 33

    X and Y are two equipotential surfaces separated by a distance of 2 m in a uniform electric field of 10 V/m10\ \text{V/m}. Surface X has a potential of 10 V.

    Class 12 Physics Electrostatics Potential And Capacitance

    (a) Calculate the potential of surface Y.

    (b) What is the work done in moving a +2+2 C charge from surface Y to surface X along path 1? How will this work change when the charge is moved along path 2? Give a reason for your answer.

    HardAsked 2023
    3 marks
  34. 34

    Question 34

    (i) Two similar large plates, each of area AA, having surface charge densities +σ+\sigma and −σ-\sigma, are separated by a distance dd in air. Find the expressions for

    (a) the field at points between the two plates and on the outer side of the plates. Specify the direction of the field in each case.

    (b) the potential difference between the plates.

    (c) the capacitance of the capacitor so formed.

    (ii) Two metallic spheres of radii RR and 2R2R are charged so that both of these have the same surface charge density σ\sigma. If they are connected to each other with a conducting wire, in which direction will the charge flow and why?

    HardAsked 2016
    5 marks
  35. 35

    Question 35

    (a) Define an ideal electric dipole. Give an example.

    (b) Derive an expression for the torque experienced by an electric dipole in a uniform electric field. What is the net force acting on this dipole?

    (c) An electric dipole of length 2 cm is placed with its axis making an angle of 60∘60^\circ with respect to a uniform electric field of 105 N/C10^{5}\ \text{N/C}. If it experiences a torque of 83 N m8\sqrt3\ \text{N m}, calculate (i) the magnitude of charge on the dipole, and (ii) its potential energy.

    HardAsked 2020
    5 marks
  36. 36

    Question 36

    (a) Draw equipotential surfaces for (i) an electric dipole and (ii) two identical positive charges placed near each other.

    (b) In a parallel plate capacitor with air between the plates, each plate has an area of 6×10−3 m26 \times 10^{-3}\ \text{m}^2 and the separation between the plates is 3 mm.

    (i) Calculate the capacitance of the capacitor.

    (ii) If the capacitor is connected to a 100 V supply, what would be the charge on each plate?

    (iii) How would the charge on the plates be affected if a 3 mm thick mica sheet of κ=6\kappa = 6 is inserted between the plates while the voltage supply remains connected?

    HardAsked 2023
    5 marks
  37. 37

    Question 37

    The circuit below shows a resistor and an air-filled capacitor connected to a battery. The graph shows the variation of voltage across the capacitor with time when the switch is moved to position 1.

    Class 12 Physics Electrostatics Potential And Capacitance

    (a) Draw a graph to show the variation of the voltage across the resistor.

    (b) At time TT, what is the current in the circuit? Give a reason for your answer.

    (c) When the switch is moved to position 2, how do the voltages across the resistor and the capacitor change?

    (d) The capacitor in the circuit above is replaced by another capacitor with the same area of plates and distance between the plates, but with a dielectric material between the plates. What happens to the following quantities when the switch is in position 1? (i) capacitance (ii) charge (iii) potential difference between the plates (iv) energy stored by the capacitor

    HardAsked 2016
    5 marks
  38. 38

    Question 38

    (i) Consider two identical point charges located at points (0,0)(0, 0) and (a,0)(a, 0).

    (1) Is there a point on the line joining them at which the electric field is zero?

    (2) Is there a point on the line joining them at which the electric potential is zero?

    Justify your answers for each case.

    (ii) State the significance of a negative value of electrostatic potential energy of a system of charges.

    Three charges are placed at the corners of an equilateral triangle ABC of side 2.0 m as shown in the figure. Calculate the electric potential energy of the system of three charges.

    Class 12 Physics Electrostatics Potential And Capacitance

    HardAsked 2023
    5 marks