(a) Diffusion of majority carriers across the junction (holes from p to n, electrons from n to p) and drift of carriers under the electric field of the depletion region, which opposes the diffusion. The junction is in equilibrium when the two currents are equal.

(b) In forward bias the barrier is lowered to V0−V, so electrons from the n-side cross into the p-side, where they are minority carriers, and holes from the p-side cross into the n-side, where they too are minority carriers. This is minority carrier injection.
Near each edge of the junction the concentration of these injected minority carriers becomes much larger than far away from the junction. Because of this concentration gradient the injected electrons diffuse through the p-side and the injected holes diffuse through the n-side. The sum of the hole-diffusion current and the electron-diffusion current is the forward current, of the order of mA.
(c) In reverse bias the barrier rises to V0+V and majority carriers cannot cross. The only current is the drift of minority carriers (electrons on the p-side, holes on the n-side) that reach the junction and are swept across by the field. There are very few minority carriers, so the current is only of the order of µA.
Even a small reverse voltage is enough to sweep across every minority carrier that arrives at the junction, so making the voltage larger does not increase the current: the current is limited by the number of minority carriers, which is set by the temperature, not by the applied voltage.