(a) In both circuits a variable dc supply (a battery with a potentiometer or rheostat, drawn as a variable cell) is connected to the diode, so that the applied voltage can be varied; a voltmeter is connected across the diode and a current meter in series with it.

In the forward-bias circuit the p-side is connected to the positive terminal; in the reverse-bias circuit the battery is reversed, so the p-side is connected to the negative terminal.
(b) In forward bias the current is large, of the order of milliamperes, so a milliammeter is used. In reverse bias the current is very small, of the order of microamperes, so a microammeter is needed to measure it.
(c) The applied voltage is changed in small steps with the rheostat, and for each value the voltage across the diode and the current through it are noted. Plotting current against voltage for both biases gives the characteristic.

In forward bias the current stays very small until the threshold voltage (about 0.7 V for Si, 0.2 V for Ge) and then increases steeply. In reverse bias the current is very small and almost constant until the breakdown voltage, where it rises suddenly.