Opening your dashboard
Class 12 Chemistry Chapter 7 Alcohols, Phenols and Ethers: Practice Questions
30 questions on Chapter 7, each worked through on its own page with the AI tutor. Class 12 Chemistry, CBSE 2026-27.
30 questions
1–5 marks · Medium difficulty
- 11 mark
Question 1
Phenol (pKa 10.0) is nearly a million times more acidic than ethanol (pKa 15.9). Both phenol and the phenoxide ion are resonance stabilised. Which statement correctly explains why resonance still favours the ionisation of phenol?
- 21 mark
Question 2
An organic compound gives a violet colour with neutral ferric chloride solution. It also decolourises bromine water at room temperature and forms a white precipitate. Compound is most likely:
- 31 mark
Question 3
Ethanol heated with concentrated sulphuric acid gives an ether at about but an alkene at . When methanol is heated with concentrated sulphuric acid, only one organic product is obtained, even at the higher temperature. Which option gives this product and the correct reason?
- 41 mark
Question 4
Assertion (A): Phenol reacts with aqueous sodium hydroxide, whereas ethanol does not.
Reason (R): The phenoxide ion is stabilised by resonance, while the ethoxide ion is not.
- 51 mark
Question 5
Assertion (A): Anisole undergoes electrophilic substitution mainly at the ortho and para positions.
Reason (R): The methoxy group withdraws electron density from the benzene ring through the resonance effect.
- 63 marks
Question 6
A laboratory has three alcohols: propan-1-ol, propan-2-ol and 2-methylpropan-2-ol. Predict the product formed when the vapour of each alcohol is passed over heated copper at . Write the equation for each reaction.
- 73 marks
Question 7
1-Methoxy-2-methylpropane, , is to be prepared by Williamson synthesis.
(a) Write the two possible pairs of sodium alkoxide and alkyl bromide that could be used.
(b) Which pair gives the better yield? Give a reason.
(c) Starting from 2-methylpropan-1-ol, write balanced equations for the preparation of the ether by the better route.
- 83 marks
Question 8
Three colourless alcohols A, B and C each have the molecular formula . On oxidation, A gives a carboxylic acid with the same number of carbon atoms, B gives a ketone, and C is not oxidised under ordinary conditions.
(a) Identify the class (primary, secondary or tertiary) of A, B and C.
(b) Give one possible structure and IUPAC name for each compound.
(c) Which compound reacts fastest with Lucas reagent? Give a reason.
- 93 marks
Question 9
Three different ethers have the molecular formula .
(a) Write the structural formula and IUPAC name of each ether.
(b) Classify each as a symmetrical (simple) or an unsymmetrical (mixed) ether.
(c) One of these ethers was once widely used as an inhalation anaesthetic. Identify it, and state why it has since been replaced.
- 103 marks
Question 10
Resorcinol (benzene-1,3-diol), , has two –OH groups on the benzene ring.
(a) Resorcinol decolourises bromine water at once and gives a white precipitate. Identify the product and write the balanced equation.
(b) Explain why position 5 of the ring is not brominated.
(c) Write the equation for the reaction of resorcinol with excess aqueous sodium hydroxide.
- 115 marks
Question 11
An organic compound A with molecular formula reacts with sodium metal and liberates hydrogen gas. On controlled oxidation, A gives compound B. Compound B gives a positive Tollens' test and on further oxidation gives compound C.
(a) Identify compounds A, B and C.
(b) Write the chemical equations for the conversion of A into B and of B into C.
(c) Write the equation for the reaction of A with sodium metal.
(d) What happens when A is heated with concentrated at ? Write the equation.
(e) Name the type of reaction in part (d).
- 125 marks
Question 12
Ethanol, phenol and anisole all contain an oxygen atom, but they show different physical and chemical properties.
(a) Their boiling points are , and (not in that order). Arrange ethanol, phenol and anisole in increasing order of boiling point and justify the order.
(b) Which of the three compounds liberate hydrogen gas with sodium metal? Write the equation(s).
(c) A student has a solution of phenol and anisole in ethoxyethane (ether). She shakes it with aqueous sodium hydroxide in a separating funnel and lets the layers settle. Which compound passes into the aqueous layer? Write the equation.
(d) Why does anisole remain in the ether layer?
(e) How can phenol be recovered from the aqueous layer? Write the equation.
- 135 marks
Question 13
Read the passage and answer the questions that follow.
Rekha investigates the chemical behaviour of phenol. She adds phenol separately to aqueous sodium hydroxide, aqueous sodium hydrogen carbonate, bromine water and aqueous sodium carbonate at . Phenol dissolves in sodium hydroxide, but it gives no effervescence with sodium hydrogen carbonate. It decolourises bromine water at once and a white precipitate forms. In sodium carbonate solution the phenol dissolves, yet again no gas is given off.
(i) Why does phenol react with sodium hydroxide but not with sodium hydrogen carbonate? [1]
(ii) Write the equation for the reaction of phenol with aqueous sodium hydroxide. [1]
(iii) Identify the white precipitate formed with bromine water and write the balanced equation. [1]
(iv) Phenol dissolves in aqueous sodium carbonate but no carbon dioxide is released. Explain this using acid strengths (pKa values), and write the equation for the reaction that takes place. [2]
- 141 mark
Question 14
Compound X has three –OH groups, labelled a, b and c in the structure below.

Which statement correctly classifies the three –OH groups?
- 151 mark
Question 15
What is the IUPAC name of the alcohol ?
- 161 mark
Question 16
Which of the following reductions gives a secondary alcohol?
- 171 mark
Question 17
Each ether below is heated with an excess of concentrated hydroiodic acid. Which one finally gives two different alkyl iodides as the organic products?
- 181 mark
Question 18
Assertion (A): Most of the methanol used today is obtained by the destructive distillation of wood.
Reason (R): Methanol is manufactured by the catalytic hydrogenation of carbon monoxide at high pressure and temperature in the presence of a catalyst.
- 191 mark
Question 19
Assertion (A): Ethoxyethane (b.p. 307.6 K) and n-pentane (b.p. 309.1 K), which have comparable molar masses, have almost the same boiling point.
Reason (R): The C–O bonds in ethers are non-polar, so ether molecules have no dipole moment.
- 201 mark
Question 20
Which ether can be prepared in good yield by heating the alcohol(s) named with concentrated sulphuric acid at about 413 K?
- 211 mark
Question 21
2-Methylphenol (o-cresol) is converted into its sodium salt with sodium hydroxide. The salt is heated with carbon dioxide at about 400 K and 4–7 atm, and the product is then acidified. What is the main organic product?
- 222 marks
Question 22
(a) Arrange ethanol, propan-2-ol, methanol and 2-methylpropan-2-ol in decreasing order of acid strength. Explain the order. [1]
(b) Which is the stronger base, sodium ethoxide or sodium tert-butoxide, ? Give a reason. [1]
- 232 marks
Question 23
In methanol the bond angle is 108.9°, while in methoxymethane the bond angle is 111.7°. In both molecules the oxygen atom is sp hybridised.
(a) Why is the bond angle in methanol smaller than the tetrahedral angle (109° 28′)? [1]
(b) Why is the bond angle in methoxymethane larger than the tetrahedral angle? [1]
- 242 marks
Question 24
(a) The C–O bond of ethoxyethane is cleaved by concentrated HI or HBr at high temperature, but concentrated HCl is much less effective. Arrange HI, HBr and HCl in order of reactivity towards ethers and explain the order. [1]
(b) Why are drastic conditions needed to cleave an ether? Write the balanced equation for the reaction of ethoxyethane with an excess of hot concentrated HI. [1]
- 252 marks
Question 25
Propene reacts with water in the presence of dilute sulphuric acid to give propan-2-ol, and not propan-1-ol.
(a) Write the three steps of the mechanism of this reaction. [1]
(b) Explain why propan-2-ol, and not propan-1-ol, is formed. [1]
- 263 marks
Question 26
How will you carry out the following conversions? Write a balanced equation for each step, with the reagents and conditions.
(i) Ethanoic acid to ethoxyethane [1]
(ii) Propan-2-ol to propan-1-ol [1]
(iii) Benzyl alcohol, , to (methoxymethyl)benzene, [1]
- 273 marks
Question 27
Write the IUPAC names of the compounds (i), (ii) and (iii) shown below.

[1 mark each]
- 283 marks
Question 28
Ethanol is converted into the same ester by three different reagents. For each, write the balanced equation, name the organic product, and state the role of the substance written over the arrow.
(i) Ethanoic acid, with a small amount of concentrated sulphuric acid [1]
(ii) Ethanoyl chloride, , in the presence of pyridine [1]
(iii) Ethanoic anhydride, , with a little concentrated sulphuric acid [1]
- 294 marks
Question 29
Read the passage and answer the questions that follow.
Ethane-1,2-diol (ethylene glycol) is mixed with the water in car radiators so that the coolant does not freeze in winter. Propane-1,2,3-triol (glycerol) is a sweet, thick liquid used in cosmetics and medicines to keep the skin moist. Both are completely miscible with water. Butan-1-ol, on the other hand, dissolves only to about 9 g per 100 mL of water. The table compares them with propan-1-ol.

Compound Molar mass / g mol Number of –OH groups Boiling point / K propan-1-ol 60 1 370 ethane-1,2-diol 62 2 470 propane-1,2,3-triol 92 3 563 (i) Glycerol is best described as:
(A) a dihydric alcohol with two primary –OH groups (B) a trihydric alcohol with three primary –OH groups (C) a trihydric alcohol with two primary and one secondary –OH group (D) a trihydric alcohol with one primary, one secondary and one tertiary –OH group [1]
(ii) Propan-1-ol and ethane-1,2-diol have almost the same molar mass, yet the diol boils 100 K higher. Explain. [1]
(iii) Glycerol has a larger molar mass than butan-1-ol, yet glycerol is miscible with water in all proportions while butan-1-ol is only partly soluble. Explain. [1]
(iv) 6.2 g of ethane-1,2-diol is treated with an excess of sodium metal. Write the balanced equation and calculate the volume of hydrogen gas evolved at STP. (C = 12, H = 1, O = 16; molar volume at STP = 22.4 L mol) [1]
- 305 marks
Question 30
Alcohols react either by cleavage of the O–H bond or by cleavage of the C–O bond. Cyclohexanol, , is treated separately with the reagents below.
(a) For each reaction, write the balanced equation, name the organic product, and state which bond(s) of the alcohol are broken. [1 mark each for (i) to (iv)]
(i) Sodium metal
(ii) Ethanoic acid with a little concentrated sulphuric acid
(iii) Concentrated hydrobromic acid, heated
(iv) Concentrated sulphuric acid (or phosphoric acid), heated, followed by oxidation of a separate sample with chromic anhydride (): give both products
(b) Phenol has an –OH group like cyclohexanol, but it does not give bromobenzene when heated with concentrated HBr. Give the reason. [1]
