Opening your dashboard
Class 12 Chemistry Chapter 6 Haloalkanes and Haloarenes: Practice Questions
30 questions on Chapter 6, each worked through on its own page with the AI tutor. Class 12 Chemistry, CBSE 2026-27.
30 questions
1–5 marks · Medium difficulty
- 11 mark
Question 1
A student warms 1-chlorobutane with aqueous potassium hydroxide solution. Which organic compound is the main product?
- 21 mark
Question 2
Bromoethane is heated with an excess of methanamine, , in ethanol. What is the main organic product?
- 31 mark
Question 3
Four alkyl chlorides are separately treated with aqueous KOH under identical conditions. Which one reacts the fastest by the mechanism?
- 41 mark
Question 4
Assertion (A): The Wurtz reaction is not a suitable method for preparing alkanes with an odd number of carbon atoms.
Reason (R): When a mixture of two different alkyl halides is treated with sodium in dry ether, three different alkanes are formed.
- 51 mark
Question 5
Assertion (A): Methyl fluoride is preferred to methyl iodide for converting nucleophiles such as or into their methyl derivatives.
Reason (R): Alkyl fluorides are prepared by heating an alkyl chloride or bromide with a metallic fluoride such as AgF, , or (Swarts reaction), because direct fluorination of an alkane with is too violent to control.
- 63 marks
Question 6
A chemist wants to prepare an alkane containing six carbon atoms using 1-bromopropane.
(a) Name the reaction that can be used.
(b) State the required reagent and reaction condition.
(c) Write the balanced chemical equation.
- 73 marks
Question 7
A chemist needs to prepare iodoethane from chloroethane using a halogen-exchange reaction.
(a) Name the reaction involved.
(b) State the reagent and solvent used.
(c) Write the chemical equation and explain why the reaction proceeds in the forward direction.
- 83 marks
Question 8
During an organic chemistry experiment, a student adds magnesium turnings to bromomethane in dry ether.
(a) Identify the organic compound formed.
(b) Write the chemical equation for its formation.
(c) In bromomethane the carbon atom bonded to bromine carries a partial positive charge, but in the product the same carbon carries a partial negative charge. Explain this reversal.
- 93 marks
Question 9
Akhil heats 1-bromobutane with excess alcoholic ammonia in a sealed tube.
(a) Name the reaction involved.
(b) Write the chemical equations.
(c) Identify the major organic product and state why ammonia is taken in excess.
- 103 marks
Question 10
A chemist wants to prepare ethoxyethane using Williamson's ether synthesis.
(a) Name the reactants required.
(b) Write the chemical equation for the reaction.
(c) Why are primary alkyl halides preferred in this reaction?
- 115 marks
Question 11
A researcher is provided with bromoethane and must prepare the following compounds:
(1) Ethanol
(2) Ethene
(3) Ethyl isocyanide
(4) N,N-Dimethylethanamine,
(5) Ethyl ethanoate
Complete the conversion plan by selecting the appropriate reagent and writing the chemical equation for each transformation.
- 125 marks
Question 12
An environmental monitoring team detects DDT and chlorofluorocarbons in samples collected near an industrial region. The following observations are recorded:
(i) The concentration of DDT increases at higher levels of the food chain.
(ii) DDT remains in soil and water for long periods.
(iii) A reduction in stratospheric ozone is observed.
(iv) Increased ultraviolet radiation reaches Earth's surface.
Using the observations:
(a) Identify the process responsible for the increasing concentration of DDT along the food chain.
(b) Relate the long-term persistence of DDT to its biodegradability.
(c) Write the reaction through which a chlorine radical is produced from Freon-12.
(d) Write the steps involved in the destruction of ozone by the chlorine radical.
(e) Suggest two measures to reduce the environmental damage caused by these compounds.
- 134 marks
Question 13
Read the passage and answer the questions that follow.
Haloalkanes are useful starting materials because the carbon atom bonded to the halogen carries a partial positive charge. Nucleophiles such as , and the hydride ion, , attack this carbon and replace the halogen. Metals behave differently: sodium in dry ether joins two alkyl groups together, while magnesium in dry ether inserts itself between the carbon and the halogen to give an organometallic compound that is destroyed by even traces of water. A student treats four separate samples of bromoethane with the reagents shown and obtains products P, Q, R and S.

(i) Product P, formed with sodium in dry ether, is: (A) ethane (B) butane (C) ethene (D) propane [1]
(ii) Product Q, formed with magnesium in dry ether, is: (A) (B) (C) (D) [1]
(iii) Product R, formed with alcoholic KCN, is: (A) propanenitrile (B) ethanenitrile (C) ethyl isocyanide (D) ethanamine [1]
(iv) Product S, formed with lithium aluminium hydride, , is: (A) ethene (B) ethanol (C) ethane (D) butane [1]
- 141 mark
Question 14
Several organohalogen compounds are important in medicine and in the human body. Which pairing of a compound with its description is correct?
- 151 mark
Question 15
Which common name is matched with the correct IUPAC name?
- 161 mark
Question 16
Compound X has the structure shown.

X is warmed with aqueous NaOH. The solution is then acidified with dilute nitric acid, and silver nitrate solution is added. Which statement correctly describes and explains the result?
- 171 mark
Question 17
The structure of the insecticide DDT is shown below.

Which statement about its five chlorine atoms is correct?
- 181 mark
Question 18
Assertion (A): Benzyl chloride (chlorophenylmethane), , is an aryl halide.
Reason (R): In benzyl chloride, the chlorine atom is bonded to an sp-hybridised carbon atom which is attached to an aromatic ring.
- 191 mark
Question 19
Assertion (A): Dichloromethane is widely used as a paint remover and as a process solvent in the manufacture of drugs.
Reason (R): Dichloromethane does not harm the human central nervous system, so workers can be exposed to its vapour without risk.
- 201 mark
Question 20
A few drops of a reddish-brown solution of bromine in are added to but-2-ene, . The colour disappears at once. Which compound is formed, and how is it classified?
- 211 mark
Question 21
NCERT gives these densities of some haloalkanes (at room temperature):
Compound Density / g mL Compound Density / g mL 0.89 1.336 1.335 1.489 1.747 1.595 Which conclusion is supported by these data?
- 222 marks
Question 22
1-Bromo-3-chloropropane, , is warmed with one mole of sodium iodide in dry acetone. A white precipitate appears, and a single organic product is obtained.
(a) Identify the organic product. Explain why this halogen, and not the other one, has been replaced. [1]
(b) What is the white precipitate? Explain why its formation helps the reaction go to completion. [1]
- 232 marks
Question 23
Benzyl chloride, , is hydrolysed to benzyl alcohol simply by boiling with aqueous NaOH. Chlorobenzene, , is not affected by boiling aqueous NaOH; it is converted to phenol only when heated with NaOH at 623 K and 300 atm.
(a) Explain why benzyl chloride is hydrolysed so easily. [1]
(b) Give two reasons why chlorobenzene is so resistant to hydrolysis. [1]
- 242 marks
Question 24
Use the data below to answer the questions.
Compound Molar mass / g mol Boiling point / K Dipole moment / D fluoromethane, 34 195 1.847 chloromethane, 50.5 249 1.860 chloroethane, 64.5 285 – ethanol, 46 351 – (a) Ethanol has a smaller molar mass than chloroethane, yet it boils 66 K higher. Explain. [1]
(b) The C–F bond is more polar than the C–Cl bond, but chloromethane boils 54 K higher than fluoromethane. Explain. [1]
- 252 marks
Question 25
Until the mid-1960s, tetrachloromethane () was widely used in industry as a degreasing agent and in homes as a spot remover and a fire extinguisher.
(a) State two harmful effects of on people who are exposed to it directly. [1]
(b) Explain how that escapes into the air can harm people who were never exposed to it directly. [1]
- 263 marks
Question 26
Write the IUPAC names of the compounds (i), (ii) and (iii) shown below.

[1 mark each]
- 273 marks
Question 27
Write the equation for each of the following reactions of chlorobenzene, and give the IUPAC name of the major organic product.
(i) Chlorobenzene is treated with ethanoyl chloride () in the presence of anhydrous . [1]
(ii) Chlorobenzene is heated with concentrated sulphuric acid. [1]
(iii) Chlorobenzene is treated with bromine in the presence of anhydrous . [1]
- 283 marks
Question 28
How will you carry out the following conversions? Write the equation for each step, with reagents and conditions.
(i) Propan-2-ol to 2-fluoropropane [1]
(ii) Cyclohexane to cyclohexene [1]
(iii) Propene to propan-2-ol, using a haloalkane as the intermediate [1]
- 294 marks
Question 29
Read the passage and answer the questions that follow.
Chloroform was once used as a general anaesthetic, but it has been replaced by safer compounds. One of them, halothane, , is used as an anaesthetic during surgery. It is manufactured in two steps. First, trichloroethene is heated with hydrogen fluoride in the presence of antimony trichloride at 403 K, which gives . This compound is then heated with bromine vapour at 723 K, when one of its hydrogen atoms is replaced by bromine. The halothane obtained contains one carbon atom bonded to four different atoms or groups, yet the product does not rotate the plane of plane-polarised light.

(i) The IUPAC name of halothane is:
(A) 1-bromo-1-chloro-2,2,2-trifluoroethane (B) 2-bromo-2-chloro-1,1,1-trifluoroethane (C) 2-chloro-2-bromo-1,1,1-trifluoroethane (D) 1,1,1-trifluoro-2-bromo-2-chloroethane [1]
(ii) Identify the chiral carbon atom in halothane. Explain why the halothane obtained by this process is optically inactive. [1]
(iii) Write the equation for the second step and name the type of reaction. [1]
(iv) Using the bond enthalpies C–F 452, C–Cl 351 and C–Br 293 kJ mol, state which carbon–halogen bond in halothane is the easiest to break, and explain why the C–F bonds are the strongest. [1]
- 305 marks
Question 30
2-Chlorobutane is to be prepared from butan-2-ol, .
(a) Write balanced equations for the preparation using (i) concentrated HCl with anhydrous , (ii) , (iii) and (iv) thionyl chloride. [2]
(b) Which of these four reagents gives the purest product most easily? Give the reason. [1]
(c) The laboratory also needs 2-bromobutane from the same alcohol, but it has no phosphorus tribromide. How can it still use a phosphorus halide? Write the equations. [1]
(d) 7.40 g of butan-2-ol is treated with excess thionyl chloride and the yield of 2-chlorobutane is 85%. Calculate the mass of 2-chlorobutane obtained. (Atomic masses: C = 12, H = 1, O = 16, Cl = 35.5) [1]
