Confirming your payment

Skip to content

Opening your dashboard

Class 10 Physics Chapter 11 Electricity: Practice Questions

30 questions on Chapter 11, each worked through on its own page with the AI tutor. Class 10 Physics, CBSE 2026-27.

30 questions

1–5 marks · Medium difficulty

  1. 1

    Question 1

    A metal-filament lamp is switched on. As the filament warms from room temperature up to its steady working temperature, the current drawn from the supply:

    MCQMedium
    1 mark
  2. 2

    Question 2

    Two wires PP and QQ are made of the same material and have the same length. The diameter of PP is twice the diameter of QQ. The ratio of their resistances RP:RQR_P : R_Q is:

    MCQMedium
    1 mark
  3. 3

    Question 3

    Two bulbs of 100 W100\,\text{W} and 40 W40\,\text{W} are connected in series. The current through the 100 W100\,\text{W} bulb is 1 A1\,\text{A}. The current through the 40 W40\,\text{W} bulb will be:

    MCQMedium
    1 mark
  4. 4

    Question 4

    Assertion (A): Bending a wire does not affect electrical resistance.

    Reason (R): Resistance of a wire is proportional to the resistivity of the material.

    MCQMedium
    1 mark
  5. 5

    Question 5

    Assertion (A): A conductor has a charge of +3.2×10−19 C+3.2 \times 10^{-19}\,\text{C}.

    Reason (R): The conductor has gained two electrons.

    MCQMedium
    1 mark
  6. 6

    Question 6

    Why does the cord of an electric oven not glow while its heating element does ?

    Medium
    3 marks
  7. 7

    Question 7

    (A) What is the meaning of electric power of an electrical device? Write its S.I. unit.

    (B) An electric kettle of 2 kW2\,\text{kW} is used for 2 h2\,\text{h}. Calculate the energy consumed in kilowatt hour and joules.

    Medium
    3 marks
  8. 8

    Question 8

    An electric heater is rated 1500 W1500\,\text{W}, 230 V230\,\text{V}. Find the current it draws and its resistance when connected to a 230 V230\,\text{V} supply. If this heater is replaced by one rated 1000 W1000\,\text{W}, 230 V230\,\text{V}, determine the change in the current drawn from the supply.

    Medium
    3 marks
  9. 9

    Question 9

    A student has two resistors 2 Ω2\,\Omega and 3 Ω3\,\Omega. She has to put one of them in place of R2R_2 as shown in the circuit. The current that she needs in the entire circuit is exactly 9 A9\,\text{A}. Show by calculation which of the two resistors she should choose.

    Class 10 Physics Electricity

    Medium
    3 marks
  10. 10

    Question 10

    A ceiling fan rated 75 W75\,\text{W} is used for 1010 hours a day.

    (a) Calculate the energy it consumes in a month of 3030 days, in kilowatt-hours.

    (b) If electricity costs ₹66 per unit, find the cost of running the fan for that month.

    (c) Why is an appliance rated in watts rather than in joules?

    Medium
    3 marks
  11. 11

    Question 11

    (A) What is meant by the statement: “The resistance of a conductor is one ohm”?

    (B) Define electric power. Write an expression relating electric power, potential difference and resistance.

    (C) How many 132 Ω132\,\Omega resistors in parallel are required to carry 5 A5\,\text{A} on a 220 V220\,\text{V} line?

    Medium
    5 marks
  12. 12

    Question 12

    (A) Three resistors R1R_1, R2R_2 and R3R_3 are connected in series across a battery of potential difference VV. Draw the circuit diagram and derive an expression for the equivalent resistance of the combination.

    (B) Two resistors of 8 Ω8\,\Omega each are connected in parallel, and this combination is joined in series with a 5 Ω5\,\Omega resistor. Calculate the equivalent resistance of the whole network.

    Medium
    5 marks
  13. 13

    Question 13

    Vinita and Ahmed demonstrated a circuit that operates the two headlights and the two sidelights of a car, in their school exhibition. Based on their demonstrated circuit, answer the following questions.

    Class 10 Physics Electricity

    (A) State what happens when switch A is connected to:

    (i) position 2

    (ii) position 3.

    (B) Find the potential difference across each lamp when lit.

    (C) Calculate the current

    (i) In each 12 Ω12\,\Omega lamp when lit.

    (ii) In each 4 Ω4\,\Omega lamp when lit.

    OR

    Show, with calculations, which type of lamp, 4.0 Ω4.0\,\Omega or 12 Ω12\,\Omega, has the higher power.

    Medium
    5 marks
  14. 14

    Question 14

    The work done in moving a charge of 2 C2\,\text{C} from one point to another in an electric circuit is 12 J12\,\text{J}. The potential difference between the two points is:

    MCQMedium
    1 mark
  15. 15

    Question 15

    Four circuit symbols are shown below.

    Class 10 Physics Electricity

    Which one represents a variable resistance (rheostat)?

    MCQMedium
    1 mark
  16. 16

    Question 16

    Assertion (A): A voltmeter can be connected in parallel across a resistor without appreciably changing the current in the circuit.

    Reason (R): A voltmeter has a very high resistance.

    Choose the correct option:

    MCQMedium
    1 mark
  17. 17

    Question 17

    A potential difference of 12 V12\,\text{V} is applied across a resistor and a current of 0.4 A0.4\,\text{A} flows through it.

    (a) Calculate the resistance of the resistor.

    (b) The potential difference is then raised to 18 V18\,\text{V}. Calculate the new current, assuming the resistance is unchanged.

    Medium
    2 marks
  18. 18

    Question 18

    The graph shows how the potential difference VV across two conductors A and B varies with the current II through them.

    Class 10 Physics Electricity

    (a) Which conductor has the greater resistance? Give a reason.

    (b) Use the graph to find the resistance of conductor A.

    (c) Both graphs are straight lines through the origin. State what that tells you about these conductors.

    Medium
    3 marks
  19. 19

    Question 19

    A wire of resistance RR is stretched uniformly until its length is doubled. Its volume stays the same. Find the new resistance in terms of RR, showing your reasoning.

    Medium
    2 marks
  20. 20

    Question 20

    Three resistors, each of 6 Ω6\,\Omega, are connected in parallel. Their equivalent resistance is:

    MCQMedium
    1 mark
  21. 21

    Question 21

    Study the circuit shown below.

    Class 10 Physics Electricity

    (a) Calculate the equivalent resistance of the circuit.

    (b) Calculate the current drawn from the battery.

    (c) Calculate the potential difference across the parallel combination.

    Medium
    3 marks
  22. 22

    Question 22

    An electric bulb is rated 110 W110\,\text{W}, 220 V220\,\text{V}.

    (a) Calculate the current it draws when working normally.

    (b) Calculate its resistance under these conditions.

    Medium
    2 marks
  23. 23

    Question 23

    (a) Define electric power and state its SI unit.

    (b) Starting from P=VIP = VI and Ohm's law, derive the expression P=I2RP = I^2R.

    (c) A 60 W60\,\text{W} bulb and a 100 W100\,\text{W} bulb, both rated 220 V220\,\text{V}, are connected in series across a 220 V220\,\text{V} supply, as shown below. Which bulb glows brighter? Explain your answer.

    Class 10 Physics Electricity

    Medium
    5 marks
  24. 24

    Question 24

    Read the following and answer the questions.

    An electric iron is rated 1000 W1000\,\text{W} and is used on a 220 V220\,\text{V} domestic supply for 22 hours every day for 3030 days. Electricity is charged at Rs 5\text{Rs}\ 5 per unit (11 unit =1 kWh= 1\,\text{kWh}). The cord that connects the iron to the socket is noticeably thicker than the cord of a table lamp.

    Class 10 Physics Electricity

    (a) Calculate the current drawn by the iron. [1]

    (b) Calculate the electrical energy consumed in 3030 days, in kilowatt-hours. [1]

    (c) Calculate the cost of running it for those 3030 days. [1]

    (d) Explain why the iron's cord is made thicker than a table lamp's. [1]

    Medium
    4 marks
  25. 25

    Question 25

    The current through a resistor is doubled, its resistance and the time of flow remaining unchanged. The heat produced becomes:

    MCQMedium
    1 mark
  26. 26

    Question 26

    (a) Define electric current and state its SI unit.

    (b) How many electrons pass through a point in a conductor each second when it carries a current of 1.6 A1.6\,\text{A}? (Charge on an electron =1.6×10−19 C= 1.6 \times 10^{-19}\,\text{C}.)

    Medium
    2 marks
  27. 27

    Question 27

    A student wants to measure the current through a resistor and the potential difference across it at the same time. The correct way to connect the two meters is:

    MCQMedium
    1 mark
  28. 28

    Question 28

    (a) Three resistors R1R_1, R2R_2 and R3R_3 are connected in series. Derive the expression for the equivalent resistance of the combination.

    (b) A 6 Ω6\,\Omega and a 3 Ω3\,\Omega resistor are connected in parallel across a 6 V6\,\text{V} battery, as shown below. Calculate the current through each resistor and the total current drawn from the battery.

    Class 10 Physics Electricity

    Medium
    5 marks
  29. 29

    Question 29

    A copper wire is 2 m2\,\text{m} long and has a cross-sectional area of 8×10−7 m28 \times 10^{-7}\,\text{m}^2. The resistivity of copper is 1.6×10−8 Ω m1.6 \times 10^{-8}\,\Omega\,\text{m}.

    (a) Calculate the resistance of the wire.

    (b) A second wire of the same material has twice the length and twice the cross-sectional area of the first. State, with reasoning, its resistance.

    Medium
    3 marks
  30. 30

    Question 30

    Assertion (A): The filament of an electric bulb is made of tungsten.

    Reason (R): Tungsten has a very high melting point and a higher resistivity than copper.

    Choose the correct option:

    MCQMedium
    1 mark