(a)
I=VP=220V1000W=4.55A (to 3 s.f.)
(b) The power in kilowatts is 1000W=1kW, and the total time is 2h×30=60h:
E=P×t=1kW×60h=60kWh
(c)
Cost=60×5=Rs 300
(d) Because of the heat a current produces in the cord itself, given by H=I2Rt. The cord is in series with the iron's element, so the whole current drawn by the iron flows through the cord.
The iron draws about 4.55A, while a table lamp draws a fraction of an ampere. Since the heating goes as the square of the current, the iron's cord would get far hotter than the lamp's if the two cords were identical.
A thicker cord has a larger cross-sectional area, and since R=ρL/A, a larger area means a smaller resistance. With less resistance, less heat is produced in the cord for the same current, and it stays at a safe temperature instead of softening its insulation. The heat is wanted in the iron's element, not in the wire leading to it.