Opening your dashboard
Class 8 Maths Chapter 11: Exploring Some Geometric Themes Solutions
42 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 11, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
42 questions with solutions
1–6 marks · Mixed difficulty
- 13 marks
Question 1
Draw the initial few steps (at least till Step 2) of the shape sequence that leads to the Sierpinski Triangle.
Solve with AIWritten solution
Start with a filled equilateral triangle (Step 0). At each step, divide every remaining filled triangle into 4 equal triangles by joining the midpoints of its sides, and remove the middle (upside-down) triangle.

- 25 marks
Question 2
Find the number of holes, and the triangles that remain at each step of the shape sequence that leads to the Sierpinski Triangle.
Solve with AIWritten solution
Let be the number of triangles remaining, and be the number of holes, at the th step.
Every remaining triangle gives rise to 3 triangles in the next step. Thus,
, and so on.
In general,
Also, each remaining triangle creates one new hole, while the old holes remain. Thus,
, and so on.
So the number of holes at the th step is the sum of the triangles that remained at all the earlier steps:
To add this quickly, multiply by 3: . Taking away the first sum from the second leaves only the last and first terms: , so .
In general,
Check: and , as found above.
- 35 marks
Question 3
Find the area of the region remaining at the nth step in each of the shape sequences that lead to the Sierpinski fractals. Take the area of the starting square/triangle to be 1 sq. unit.
Solve with AIWritten solution
Let be the area of the region remaining at the th step. The area of the starting square/triangle is 1 sq. unit.
(i) Sierpinski Triangle (Gasket):
At each step, the triangle is divided into 4 equal triangles and the middle triangle is removed, so of the area remains.
, and so on.
Thus, the area remaining at the th step, .
(ii) Sierpinski Carpet:
At each step, the square is divided into 9 equal squares and the middle square is removed, so of the area remains.
, and so on.
Thus, the area remaining at the th step, .
- 43 marks
Question 4
Draw the initial few steps (at least till Step 2) of the shape sequence that leads to the Koch Snowflake.
Solve with AIWritten solution
Start with an equilateral triangle (Step 0). At each step, divide every side into 3 equal parts and replace the middle part with two sides of a smaller equilateral triangle pointing outward, so each side becomes 4 sides.

- 54 marks
Question 5
Find the number of sides in the nth step of the shape sequence that leads to the Koch Snowflake.
Solve with AIWritten solution
Let denote the number of sides at the th step.
At each step, every side is replaced by 4 sides. Thus,
.......
Thus, the number of sides at the th step, .
- 64 marks
Question 6
Find the perimeter of the shape at the nth step of the sequence. Take the starting equilateral triangle to have a side length of 1 unit.
Solve with AIWritten solution
Let the perimeter at the th step be .
At each step, each side is replaced by 4 sides, and each new side is of the previous side.
So, the perimeter increases by a factor of .
At Step 0, the equilateral triangle has side length 1 unit, so
units
units
units
units .......
Therefore, the perimeter at the th step, units.
- 71 mark
Question 7
Picture your name, then read off the letters backwards. Make sure to do this by sight, not by sound — really see your name! Now try with your friend's name.
Solve with AIWritten solution
This is a visualisation exercise, so the answer is what you see in your mind. Here is how it works for the name MEERA.
Picture the word MEERA written on a board. Keep looking at that picture, start at the last letter and move left one letter at a time: A, R, E, E, M. So MEERA read backwards by sight is AREEM.
Doing it by sight, not by sound, matters: you must read the letters off the picture, not try to say the word backwards.
Now do the same with your friend's name. For example, ARJUN read backwards letter by letter is NUJRA.
- 84 marks
Question 8
Cut off the four corners of an imaginary square, with each cut going between midpoints of adjacent edges. What shape is left over? How can you reassemble the four corners to make another square?
Solve with AIWritten solution
Let ABCD be a square of side . Let P, Q, R and S be the midpoints of AB, BC, CD and DA. Cut along PQ, QR, RS and SP.

Shape left over: PQRS is a square.
The four cut-off corners are right-angled triangles whose two short sides are each . So the four triangles are congruent and PQ = QR = RS = SP.
Each corner triangle is isosceles with a right angle, so its other two angles are each. At P the angles on the straight line AB add up to : , so . In the same way the angles at Q, R and S are . Four equal sides and four right angles make PQRS a square.
Making another square from the four corners: put the four triangles together so that their right-angled corners A, B, C and D meet at one point, with the short sides touching. The four right angles fill round that point, and the four long sides PQ, QR, RS and SP form the boundary. This new shape is a square of side PQ, the same size as PQRS.
Check with areas: the four corners together have area , half of the square ABCD. PQRS is the other half, so the two squares have equal areas.
- 94 marks
Question 9
Mark the sides of an equilateral triangle into thirds. Cut off each corner of the triangle, as far as the marks. What shape do you get?
Solve with AIWritten solution
Let ABC be an equilateral triangle of side . Mark P and Q on AB, R and S on BC, and T and U on CA so that AP = PQ = QB, BR = RS = SC and AU = UT = TC . Cut along PU, QR and ST.

The shape left is a regular hexagon PQRSTU.
Each corner cut off, for example triangle APU, has two sides of with a angle between them, so it is an equilateral triangle and PU . In the same way QR ST .
The other three sides of the hexagon are the middle thirds PQ, RS and TU, each . So all six sides are equal.
At P, the straight angle on AB is split into (corner triangle) and the angle of the hexagon, so that angle is . The same is true at every vertex, so all six angles are equal. Equal sides and equal angles make the hexagon regular.
- 104 marks
Question 10
Mark the sides of a square into thirds and cut off each of its corners as far as the marks. What shape is left?
Solve with AIWritten solution
Let ABCD be a square of side . Mark E and F on AB, G and H on BC, I and J on CD, and K and L on DA so that each side is cut into three equal parts of (AE = EF = FB, BG = GH = HC, CI = IJ = JD, DK = KL = LA). Cut off the corners along LE, FG, HI and JK.

The shape left is an octagon EFGHIJKL, but it is not a regular octagon.
Angles: each corner cut off (for example triangle FBG) is a right-angled triangle with two equal sides of , so its other two angles are . Each angle of the octagon is . All eight angles are equal.
Sides: four sides are the middle thirds of the square: EF = GH = IJ = KL . The other four sides are the cuts, such as FG. In the right triangle FBG, by the Baudhāyana–Pythagoras theorem,
So is twice , and FG is longer than EF. For example, if cm then EF cm but FG cm, which is about cm.
So the octagon has all its angles equal, but its sides have two different lengths. It is not a regular octagon. (To get a regular octagon, the corners would have to be cut off closer to the corners of the square.)
- 111 mark
Question 11
Can you describe a solid and a viewpoint that would result in the following case? If it helps, you can imagine the solid passing through a wall like Tom did, and leaving a hole of the appropriate shape.
A solid whose profile has a square outline.
Solve with AIWritten solution
A cube, seen from directly in front of one of its faces (or from directly above it). Its profile is a square.

There are other answers too: a cuboid with a square end, seen from that end, or a square pyramid seen from directly above.
- 121 mark
Question 12
Can you describe a solid and a viewpoint that would result in the following case? If it helps, you can imagine the solid passing through a wall like Tom did, and leaving a hole of the appropriate shape.
A solid whose profile has a circular outline.
Solve with AIWritten solution
A sphere (a ball), seen from any viewpoint at all. Every profile of a sphere is a circle.

There are other answers too: a cylinder standing upright, seen from directly above, or a cone standing on its base, seen from directly above.
- 131 mark
Question 13
Can you describe a solid and a viewpoint that would result in the following case? If it helps, you can imagine the solid passing through a wall like Tom did, and leaving a hole of the appropriate shape.
A solid whose profile has a triangular outline.
Solve with AIWritten solution
A triangular pyramid (tetrahedron) resting on its base, seen from directly above: the outline is the triangle of its base.

There are other answers too: a triangular prism seen from one end, or a cone seen from the side (its outline is a triangle).
- 142 marks
Question 14
Can you visualise a solid that has the following contrasting profiles? Feel free to consider viewpoints from any direction, including directly above the object.
A solid with a rectangular profile from one viewpoint and a circular profile from another viewpoint.
Solve with AIWritten solution
A cylinder standing upright (like a tin can). From directly above its profile is a circle; from the front it is a rectangle.

The solid is not unique: for example, a cylinder lying on its side also works (a circle from one end, a rectangle from above).
- 152 marks
Question 15
Can you visualise a solid that has the following contrasting profiles? Feel free to consider viewpoints from any direction, including directly above the object.
A solid with a circular profile from one viewpoint and a triangular one from another viewpoint.
Solve with AIWritten solution
A cone standing on its base (like a birthday cap). From directly above (or below) its profile is a circle; from the front it is a triangle.

The solid is not unique: a cone of any height and any base size works.
- 162 marks
Question 16
Can you visualise a solid that has the following contrasting profiles? Feel free to consider viewpoints from any direction, including directly above the object.
A solid with a rectangular profile from one viewpoint and a triangular one from another viewpoint.
Solve with AIWritten solution
A triangular prism (shaped like a tent). Looking along its length from one end, the profile is a triangle; from the side it is a rectangle.

Another answer: a pyramid with a rectangular base, standing on its base. From directly above its outline is a rectangle; from the front it is a triangle.
- 172 marks
Question 17
Can you visualise a solid that has the following contrasting profiles? Feel free to consider viewpoints from any direction, including directly above the object.
A solid with a trapezium shaped profile from one viewpoint and a circular one from another viewpoint.
Solve with AIWritten solution
A cone with its top cut off by a cut parallel to its base (the shape of a lampshade, or of a bucket turned upside down). From directly above its profile is a circle; from the front it is a trapezium.

The solid is not unique: a bucket the right way up, or a flower pot, gives the same two profiles.
- 182 marks
Question 18
Can you visualise a solid that has the following contrasting profiles? Feel free to consider viewpoints from any direction, including directly above the object.
A solid with a pentagonal profile from one viewpoint and a rectangular one from another viewpoint.
Solve with AIWritten solution
A pentagonal prism. Looking along its length from one end, the profile is the pentagon; from the side it is a rectangle.

A simple hut (a cuboid with a sloping roof on top) is also a pentagonal prism: from the end its outline is a pentagon, from the side it is a rectangle.
- 195 marks
Question 19
If the congruent polygons of a prism have 10 sides, how many faces, edges, and vertices does the prism have? What if the polygons have n sides?
Solve with AIWritten solution
(i) For a prism whose bases are 10-sided polygons:
Faces = Number of side faces + 2 bases
Edges = Edges of top base + edges of bottom base + vertical edges
Vertices = Vertices of top base + vertices of bottom base
(ii) For a prism whose bases are -sided polygons:
Faces
Edges
Vertices
- 205 marks
Question 20
If the base of a pyramid has 10 sides, how many faces, edges, and vertices does the pyramid have? What if the base is an n-sided polygon?
Solve with AIWritten solution
(i) For a pyramid whose base has 10 sides:
Faces: Number of triangular side faces + Base
Edges = Edges of the base + edges joining the apex to the base vertices
Vertices = Vertices of the base + Apex
(ii) For a pyramid with an -sided base:
Vertices
Faces
Edges
- 213 marks
Question 21
Which of the following are the nets of a cube? First, try to answer by visualisation. Then, you may use cutouts and try.
Solve with AIWritten solution
(i) No. When it is folded, the square at the top left and the square at the right end of the bottom row land on the same face, and one face of the cube is left open.
(ii) Yes. It folds into a cube: every square lands on a different face.
(iii) Yes. This "staircase" folds into a cube.
(iv) Yes. The row of four wraps round the cube and the squares above and below close the top and bottom.
(v) No. When it is folded, the square at the right end of the top row and the square at the bottom of the column land on the same face, and one face is left open.
(vi) Yes. The row of four wraps round the cube and the other two squares close the top and bottom.
So (ii), (iii), (iv) and (vi) are nets of a cube; (i) and (v) are not.
- 223 marks
Question 22
A cube has 11 possible net structures in total. In this count, two nets are considered the same if one can be obtained from the other by a rotation or a flip. For example, the following nets are all considered the same —

Find all the 11 nets of a cube.
Solve with AIWritten solution
Here are all 11 nets of a cube. No two of them can be turned into each other by a rotation or a flip.

A good way to be sure none is missed is to sort them by the longest row of squares:
- a row of 4 squares with one square above it and one below it: 6 nets (Nets 2, 3, 7, 9, 10 and 11);
- a longest row of 3 squares with 2 squares on one side and 1 on the other: 3 nets (Nets 5, 6 and 8);
- two rows of 3 squares that overlap by one square: 1 net (Net 1);
- a staircase of three rows of 2 squares: 1 net (Net 4).
. A row of 5 or 6 squares can never fold into a cube.
- 235 marks
Question 23
Draw a net of a cuboid having sidelengths:
(i) 5 cm, 3 cm, and 1 cm
(ii) 6 cm, 3 cm, and 2 cm
Solve with AIWritten solution
(i) A cuboid of 5 cm × 3 cm × 1 cm has 6 rectangular faces in 3 pairs: two of 5 cm × 3 cm, two of 5 cm × 1 cm and two of 3 cm × 1 cm.
Put the four faces that go round the cuboid in one strip, 5 cm wide: 5 cm × 3 cm, 5 cm × 1 cm, 5 cm × 3 cm, 5 cm × 1 cm. The strip is cm long. Then attach the two 3 cm × 1 cm end faces to the two 3 cm sides of one 5 cm × 3 cm face.

When folded, the strip wraps round to make the four long faces, and the two small flaps close the ends. Check: the net has area sq. cm, the same as the total area of the six faces.
(ii) The faces are two of 6 cm × 3 cm, two of 6 cm × 2 cm and two of 3 cm × 2 cm.
Make a strip 6 cm wide: 6 cm × 3 cm, 6 cm × 2 cm, 6 cm × 3 cm, 6 cm × 2 cm, which is cm long. Attach the two 2 cm × 3 cm end faces to the two 3 cm sides of one 6 cm × 3 cm face.

Check: area of the net sq. cm.
- 243 marks
Question 24
What is a net of a regular tetrahedron? Which of the following are nets of a regular tetrahedron?
Solve with AIWritten solution
A net of a regular tetrahedron is a flat shape made of four equilateral triangles that can be folded along their shared sides to make the tetrahedron (a solid with 4 equilateral-triangle faces).
(i) Yes. Fold the three outer triangles up over the middle triangle; their tips meet at one point.
(ii) No. Four triangles meet at one point of this shape (the lower right corner of the left triangle). When it is folded, all four corners would have to meet at one vertex of the tetrahedron, but only three faces meet at each vertex. So two triangles overlap and one face is left open.
(iii) Yes. This strip of four triangles folds up: the two end triangles close the gaps.
(iv) No. It is made of five triangles, but a tetrahedron has only four faces.
So (i) and (iii) are nets of a regular tetrahedron. These are the only two nets it has.
- 255 marks
Question 25
Draw a net with appropriate measurements that can be folded into a regular tetrahedron. Verify if it works by making an actual cutout.
Solve with AIWritten solution
(i) Draw an equilateral triangle ABC of side 6 cm.
(ii) Mark the midpoints D, E and F of the sides AB, BC and CA.
(iii) Join DE, EF and FD. This divides the big triangle into four equilateral triangles, each of side 3 cm.

(iv) The middle triangle DEF is the base of the tetrahedron.
(v) Fold the three outer triangles upwards along DE, EF and FD.
(vi) The corners A, B and C meet at one point. The solid formed is a regular tetrahedron with every edge 3 cm.
Verification: cut out the net, fold along the dashed lines and check that the four faces fit together without a gap or an overlap, with all four faces equilateral triangles of side 3 cm.
- 265 marks
Question 26
Draw a net with appropriate measurements that can be folded into a square pyramid. Verify if it works by making an actual cutout.
Solve with AIWritten solution
(i) Draw a square ABCD of side 5 cm. This is the base.
(ii) On each side of the square draw an equilateral triangle of side 5 cm pointing outwards: ABE on AB, BCF on BC, CDG on CD and DAH on DA.

(iii) Fold the four triangles upwards along the sides of the square. The points E, F, G and H meet at one point, the top of the pyramid.
Verification: cut out the net and fold it. The four triangles meet at the top and close up, giving a square pyramid with a 5 cm square base and all eight edges 5 cm. The triangles can meet because each sloping edge (5 cm) is longer than half the diagonal of the square (about 3.5 cm).
- 273 marks
Question 27
What is the net of a cylinder? If the circular faces of a cylinder are unfolded, and if a cut is made along the height of the cylinder, what are the sidelengths of the rectangle obtained?
Solve with AIWritten solution
If the circular faces of a cylinder are unfolded and its side is cut along its height and opened out, we get the net of the cylinder: a rectangle with two circles, one attached to each long side.

The sidelengths of the rectangle are:
- one side equals the height of the cylinder;
- the other side equals the distance round the circular face (its circumference), because this side of the rectangle wraps exactly once round the circle.
For example, for a tin of height 10 cm whose circular top measures 22 cm round its edge, the rectangle is 22 cm by 10 cm.
- 283 marks
Question 28
How will the net of a cone look?
Solve with AIWritten solution
Slit the cone open along the line from its tip O to the edge of the base, and unroll it.
Every point on the boundary of the base circle is at the same distance from O. So after unrolling, the boundary becomes part of a circle with centre O and radius . The circular base is a separate circle.

So the net of a cone is a part of a circle (centre O, radius ) together with a circle (the base) touching its curved edge. The curved edge of the first piece is exactly as long as the boundary of the base circle, because it wraps once round the base.
- 294 marks
Question 29
Draw a net with appropriate measurements that can be folded into a triangular prism. Verify that it works by making an actual cutout.
Solve with AIWritten solution
Draw three rectangles of 6 cm × 3 cm next to each other along their 6 cm sides, making a strip 6 cm wide and 9 cm long. On the two 3 cm sides of the middle rectangle, draw equilateral triangles of side 3 cm.

Verification: cut out the net and fold along the lines between the rectangles until the first and last rectangles meet. The three rectangles form the three side faces, and the two triangles fold in to close the ends: each side of a triangle (3 cm) fits exactly against a 3 cm edge of the rectangles. The solid is a triangular prism 6 cm long whose ends are equilateral triangles of side 3 cm.
- 303 marks
Question 30
Observe the front view, top view and side view of the different lines in Fig. 4.6. Is there any relation between their lengths?
The views of the three lines are shown below.
Solve with AIWritten solution
In Fig. 4.6 the three lines lie flat (parallel to the horizontal plane), start from the same point and are turned by different amounts away from the vertical plane.
- Front view: all three lines have front views of the same length.
- Side view: for the first line the side view is just a point. It gets longer as the line turns further away from the vertical plane.
- Top view: the lines are parallel to the horizontal plane, so the top view of each line is as long as the line itself. It is the longest of the three views.
Relation: in the top view, the line is the longest side of a right triangle whose other two sides are as long as the front view and the side view. So, by the Baudhāyana–Pythagoras theorem,
For example, if the front view is 4 cm long and the side view is 3 cm long, the top view (and the line itself) is 5 cm long, since .
Also, no view of a line is ever longer than the line itself.
- 315 marks
Question 31
Find the front view, top view and side view of each of the following solids, fixing its orientation with respect to the vertical, horizontal and side planes: cube, cuboid, parallelepiped, cylinder, cone, prism, and pyramid. If needed, see the next problem for clues.
Solve with AIWritten solution
Place each solid on the horizontal plane as described in the first column. (A different placing gives different views.)
Solid and how it is placed Front view Top view Side view Cube, one face towards the front Square Square Square Cuboid, one face towards the front Rectangle Rectangle Rectangle Parallelepiped, standing on a rectangular face and leaning to the right Parallelogram Rectangle (with a line where the top face ends) Rectangle Cylinder, standing on a circular face Rectangle Circle Rectangle Cone, standing on its base Triangle Circle with a dot at the centre (the tip) Triangle Triangular prism, lying on a rectangular face with a triangular face towards the side Rectangle Rectangle with a line along the middle (the top edge) Triangle Square pyramid, standing on its base with a side towards the front Triangle Square with its two diagonals (the edges to the top) Triangle - 324 marks
Question 32
Match each of the following objects with its projections.
Solve with AIWritten solution
Match each object with the row of views that fits all three directions.
Object (row on the left) Its views (row of the table on the right) How to recognise it Jug (1st) 8th row top view is a circle with the spout and the handle sticking out Funnel (2nd) 6th row a circle from the top, a cone with a pipe from the front and the side Hammer (3rd) 7th row the handle seen end-on from the front, the head seen from the side Car (4th) 1st row headlights from the front, wheels from the side, a long rectangle from the top Slide (5th) 3rd row the ladder and the slope seen from the side Chair (6th) 4th row the back and the legs from the front and the side Ceiling fan (7th) 5th row three blades from the top Round container with a handle (8th) 2nd row a circle with the lid knob from the top, the handle seen from the side 
- 336 marks
Question 33
Draw the top view, front view and the side view of each of the following combinations of identical cubes.
Solve with AIWritten solution
Look at each solid along the arrows. A line inside a view shows where the surface steps back (or down), so the two parts are at different distances from the viewer.

- (i) Top: an L of 3 squares. Front: 2 squares wide and 1 high. Side: 2 squares wide and 1 high.
- (ii) Top: an L of 3 squares, with a line where the tall part begins. Front: a short square on the left and a column of 2 on the right, with a line between them. Side: the same L shape.
- (iii) Top: an L of 4 squares (a row of 3 at the back and one square in front on the left). Front: 3 wide and 1 high, with a line after the first square. Side: 2 wide and 1 high, with a line in the middle.
- (iv) Top: a 3 × 3 square with a line across the back row and a short line inside it. Front: a base row of 3 with a step above it (2 squares high over the left two columns, 1 over the right), and a line between the base and the upper part. Side: a base of 3 with a column of 2 above the back square, and a line below its top square.
- (v) Top: 2 squares with a line between them. Front: a column of 3 with one square sticking out to the right from the middle. Side: a column of 3 with lines between all the squares.
- (vi) Top: a 3 × 3 square without its front right corner, with a line across the back row and lines between the three back squares. Front: a U shape 3 wide and 3 high, with a line across above the base row and a line in the base row after 2 squares. Side: a base of 3 with a column of 3 at the back, and a line after the first square of the base.
- 345 marks
Question 34
Imagine eight identical cubes, glued together along faces to form the letter ‘C’ (the letters made of cubes are shown below).

(i) This looks like a ‘C’ from the front. What does it look like from the side? From the top?
(ii) Glue additional cubes to make a shape that looks like ‘C’ from the front and ‘A’ from the top.
(iii) Now, can you glue even more cubes to make it look like ‘C’ from the front, ‘A’ from the top, and ‘F’ from the side?
(iv) Can you think of other letter combinations to make with a single combination of cubes in this manner?
Solve with AIWritten solution
Call the layers of cubes, from the front, layer 1, layer 2, layer 3 and layer 4. The C is layer 1: 3 cubes on top, 2 down the left side and 3 at the bottom.
(i) The C is only one cube thick. From the side we see a single column 4 cubes high (like the letter I). From the top we see a single row of 3 squares.
(ii) New cubes must go only behind cubes of the C, so that they are hidden from the front and the front view stays a C. Put 7 more cubes in the top row of layers 2, 3 and 4, behind the top row of the C:
- layer 2: 2 cubes, above the left and right columns;
- layer 3: 3 cubes, a full row;
- layer 4: 2 cubes, above the left and right columns.
Seen from the top, the squares now make an A that is 3 squares wide and 4 deep (its point is at the front, so it reads the right way up from the back). The shape has 15 cubes.
(iii) Yes. Glue 2 more cubes in the second row from the bottom, in the left column of layers 2 and 3. They are hidden behind the C from the front and under the top row from above, so the front still shows C and the top still shows A. From the side (front of the shape on the left), the squares now make an F: a full top row, a stem on the left, and a shorter middle arm. The shape has 17 cubes.

Note: a top view must be exactly as wide as the front view, and the C is 3 cubes wide, so the A has to be 3 squares wide (the book draws it 4 wide). For the same reason the F is 4 squares wide, because the shape is 4 cubes deep.
(iv) Yes, many. For example, 9 cubes can be glued so that the shape looks like T from the front, Z from the top and H from the side. Other combinations, such as L from the front, O from the top and C from the side, can also be made.
- 353 marks
Question 35
Which solid corresponds to the given top view, front view, and side view?
Solve with AIWritten solution
Solid (ii).
Read the three views first:
- Top view: the front strip is there only on the left half; the front right part is cut away.
- Front view: there are three levels; the top level covers only the left half, so the back part is taller on the left than on the right (a step).
- Side view: the tall part is only at the back, with a lower part in front of it.
Solid (ii) has all three: the front of its base sticks out only on the left, its back wall is stepped (taller on the left), and the wall is at the back. So its top, front and side views are exactly the ones given.
Why the others do not fit:
- (i) and (v): the back wall has the same height all along, so the front view would have no step; also the front of the base has a gap in the middle, which the top view does not show.
- (iii): the wall is stepped like (ii), but the front of the base has a gap in the middle, so the top view would be wrong.
- (vi): the top of the wall has a dip in the middle and the base has a gap in the middle, so both the front and the top views would be wrong.
- (iv): the raised block has one flat top, so the front view would have no step.
- (vii): the tall part is on the left and runs from the front to the back, so the side view would show a tall part across the whole width, not only at the back.
- 365 marks
Question 36
Using identical cubes, make a solid that gives the following projections.
Solve with AIWritten solution
Each row gives the top, front and side views of one solid. Build it layer by layer, reading the bottom layer from the top view. (In the drawing below, the grey faces are the fronts.)
(i), (ii), (iii): 9 cubes.
- Bottom layer (7 cubes), as in the top view: back row, the middle and right cubes; middle row, all three; front row, the left and right cubes (a gap in the middle).
- Second layer (2 cubes): on the middle and right cubes of the back row.
The dashed lines in the side view (iii) are hidden edges: the back wall of the gap in the front row, and the back of the middle-row left cube, which has no cube behind it.
(iv), (v), (vi): 7 cubes.
- Bottom layer (5 cubes): back row 2, middle row 2, front row 1 on the left.
- Second layer (2 cubes): on the two cubes of the back row.
(vii), (viii), (ix): 8 cubes.
- The same 7 cubes as in (iv)–(vi), and 1 more cube on top of the back right cube.
The dashed line in the side view (ix) is the top edge of the back left cube of the second layer, hidden behind the taller column.

- 373 marks
Question 37
Find the number of cubes in this stack of identical cubes.
Solve with AIWritten solution
Count the stack layer by layer from the top. A cube cannot float, so every cube we see rests on cubes below it, and some cubes are hidden inside the stack. If the stack is filled in (a solid pyramid of cubes, with no gaps):
- top layer: 1 cube
- 2nd layer: cubes
- 3rd layer: cubes
- bottom layer: cubes

Total number of cubes .
Only 10 of these cubes (, the ones on the outside) can be seen in the picture; the other 10 are hidden behind and under them. The picture by itself cannot show the hidden cubes — this is the information we lose in a projection — so the count of 20 assumes the stack is a filled pyramid.
- 383 marks
Question 38
What are the different shapes the projection of a cube can make under different orientations?
Solve with AIWritten solution
Think of the shadow of a cube on a wall when the sunlight falls straight onto the wall; this shadow is the projection of the cube. There are only three possible shapes:
- Square: when one face of the cube is parallel to the wall.
- Rectangle (not a square): when the cube is turned about one edge that stays parallel to the wall. Two faces are seen side by side; the height stays equal to the edge of the cube and the width grows.
- Hexagon: when the cube is turned so that no face and no edge is parallel to the wall. When the cube is balanced on one corner (with the opposite corner straight in front), the hexagon is a regular hexagon.

No other shape is possible. Opposite edges of a cube are parallel, and the projections of parallel lines are parallel, so the sides of the outline come in parallel pairs: the outline has 4 or 6 sides. A 4-sided outline happens only when a pair of faces is at right angles to the wall, and then the outline is always a rectangle (or a square). So a triangle, a pentagon, or a parallelogram that is not a rectangle never appears.
- 394 marks
Question 39
In addition to the 5 ways shown in Fig. 4.8, are there any additional ways of gluing four cubes together along faces? Can you visualise and draw these as well?
Solve with AIWritten solution
Yes. Besides the 5 flat shapes of Fig. 4.8, four cubes can be glued together along faces in 3 more ways. None of them can lie flat on a table:

- (a) one cube in the corner with one cube on each of three of its faces, pointing in three different directions (like the corner of a box);
- (b) a twisted shape: two cubes side by side on the table, a third cube on top of one of them, and the fourth cube stuck to the side of the top cube, pointing in a new direction;
- (c) the mirror image of (b). It cannot be turned around to match (b), just as a left hand cannot be turned into a right hand.
So there are ways in all. (If a shape and its mirror image are counted as the same, there are 7.) Note that the flat L shape and its mirror image are the same solid: a flat piece can simply be flipped over.
- 404 marks
Question 40
Draw the following figures on the isometric grid.

[Hint: It may be useful to determine whether the edge to be currently drawn — say, along the height — goes from down to up or up to down. Accordingly, draw the line segment on the grid either in the direction of the height axis or opposite to it.]
Solve with AIWritten solution
Draw each solid edge by edge, counting units along the three axes: height along the vertical lines of the grid, and length and depth along the two slanting families of lines. The book does not give measurements, so the sizes below are read from the pictures.
- L shape: a bar 1 unit by 1 unit in cross-section, lying 3 units long along the depth, with a column rising 3 units at its back end.
- T shape: a block 7 units long, 2 units high and 2 units deep, with a block 2 units long rising 3 more units from it, 3 units from the left end and 2 units from the right end.
- Steps: 3 steps, each 1 unit high and 1 unit wide, and 2 units deep.

As in the hint, decide for each edge whether it goes up or down the height (or forward or back along the length or depth), and draw it along the grid line in that direction.
- 414 marks
Question 41
Is there anything strange about the path of this ball? Recreate it on the isometric grid.

[Hint: Consider a portion of this figure that is physically realisable and identify the 3 primary directions.]
Solve with AIWritten solution
Yes, the path is impossible. Follow the arrows from the red ball:
- the ball rolls along a level row of 5 squares;
- it climbs up one step (the arrow on the riser points up), moves on one square, and climbs up a second step;
- it rolls along the top row and then back along the left row to the red ball.
So the ball goes up two steps and never comes down, yet it comes back to the place where it started. No real path can do that; this is an impossible staircase.
Why the picture fools us. Each small part of the picture is a correct isometric drawing. For example, the front row with the two steps is a real staircase that can be built from cubes: its edges run along the three primary directions — height (the vertical lines) and length and depth (the two families of slanting lines). Our eyes check only the joins close together, so we do not notice that the heights do not match when we go all the way round. This is possible because in an isometric drawing, a point and the point 1 unit nearer to us along all three directions land on the same spot of the paper.
Recreating it: draw it edge by edge on the isometric grid, starting with the front row and the two steps, then the top row and the left row.

- 425 marks
Question 42
Observe this triangle.

(i) Would it be possible to build a model out of actual cubes? What are the front, top, and side profiles of this impossible triangle?
(ii) Recreate this on an isometric grid.
(iii) Why does the illusion work?
Solve with AIWritten solution
(i) A closed triangle like this cannot be built out of actual cubes. Going round it, each corner is a proper right-angled joint, but three straight bars along the three directions (height, length and depth) cannot close up into a triangle.
But a model that looks exactly like the picture can be built. Take 13 cubes:
- a vertical bar of 5 cubes;
- from its top cube, a bar of 4 more cubes going along the length;
- from its bottom cube, a bar of 4 more cubes going along the depth.
The free ends of the two bars do not touch. Seen from one special direction, the end of the top bar exactly covers the end of the bottom bar, and the picture shows a closed triangle.
Profiles of this model (each is an L of 9 squares: two arms of 5 squares sharing the corner square):
- front: the vertical bar as a column of 5 squares, with the top bar as a row of 5 squares along the top; the bottom bar is hidden behind the corner square;
- top: the top bar as a row of 5 squares and the bottom bar as a column of 5 squares, meeting at the corner square;
- side: the vertical bar as a column of 5 squares, with the bottom bar as a row of 5 squares along the bottom.

(ii) On the isometric grid, draw the vertical bar 5 units high, the top bar going down to the right and the bottom bar going up to the right. At the right-hand corner, draw the end of the top bar in front, so that it covers the end of the bottom bar.

(iii) The illusion works because an isometric drawing loses depth. Every join is drawn correctly, so each corner looks real. But in an isometric drawing, a point and the point 1 unit nearer to us along all three directions fall on the same spot of the paper. The end of the top bar is 4 units nearer than the end of the bottom bar along each of the three directions, so the two ends fall on the same spot and look joined.
What Class 8 Maths Ch 11 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Fractals
- 02Visualising Solids
- 03Making Solids
- 04Shortest Paths on a Cube
- 05Representation of Solids on a Plane Surface
- 06Isometric Projections
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 11 before.
Class 8 Maths Ch 11 questions students ask
How many questions are there in Class 8 Maths Ch 11?
42 questions. Every one is solved step by step on this page.
Are these Class 8 Maths solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 8 Maths Ch 11 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
