Confirming your payment

Skip to content

Opening your dashboard

Class 12 Physics Chapter 3: Current Electricity Solutions

9 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 3, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 3 solutions

9 questions with solutions

3–5 marks · Mixed difficulty

  1. 1

    Question 1

    The storage battery of a car has an emf of 12 V. If the internal resistance of the battery is 0.4 Ω, what is the maximum current that can be drawn from the battery?

    Easy
    3 marks
    Solve with AI
    Written solution

    With an external resistance RR, the current is

    I=εR+rI = \frac{\varepsilon}{R + r}

    It is largest when RR is smallest. The limit is R=0R = 0, with the terminals joined by a thick wire (a short circuit). Only the internal resistance then limits the current:

    Class 12 Physics Current Electricity

    Imax⁡=εr=12 V0.4 Ω=30 AI_{\max} = \frac{\varepsilon}{r} = \frac{12\ \text{V}}{0.4\ \Omega} = 30\ \text{A}

    Answer: 30 A. (In practice this should never be done: the whole power εI=360\varepsilon I = 360 W would be dissipated inside the battery.)

  2. 2

    Question 2

    A battery of emf 10 V and internal resistance 3 Ω is connected to a resistor. If the current in the circuit is 0.5 A, what is the resistance of the resistor? What is the terminal voltage of the battery when the circuit is closed?

    Medium
    3 marks
    Solve with AI
    Written solution

    Class 12 Physics Current Electricity

    Resistance. The emf drives the current through the external and internal resistances in series:

    I=εR+r⇒R+r=εI=100.5=20 Ω⇒R=20−3=17 ΩI = \frac{\varepsilon}{R + r} \quad\Rightarrow\quad R + r = \frac{\varepsilon}{I} = \frac{10}{0.5} = 20\ \Omega \quad\Rightarrow\quad R = 20 - 3 = 17\ \Omega

    Terminal voltage of the battery. Part of the emf is dropped across the internal resistance:

    V=ε−Ir=10−(0.5)(3)=8.5 VV = \varepsilon - Ir = 10 - (0.5)(3) = 8.5\ \text{V}

    This is also the potential difference across the external resistor: V=IR=0.5×17=8.5V = IR = 0.5 \times 17 = 8.5 V.

    Answer: R=17 ΩR = 17\ \Omega; terminal voltage 8.5 V.

  3. 3

    Question 3

    At room temperature (27.0 °C) the resistance of a heating element is 100 Ω. What is the temperature of the element if the resistance is found to be 117 Ω, given that the temperature coefficient of the material of the resistor is 1.70×10−4 ∘C−11.70 \times 10^{-4}\ ^\circ\text{C}^{-1}?

    Medium
    5 marks
    Solve with AI
    Written solution

    Resistance varies with temperature as

    RT=R27[1+α(T−27)]R_T = R_{27}\left[1 + \alpha(T - 27)\right]

    Class 12 Physics Current Electricity

    T−27=RT−R27αR27=117−100(1.70×10−4)(100)=171.7×10−2=1000 ∘CT - 27 = \frac{R_T - R_{27}}{\alpha R_{27}} = \frac{117 - 100}{(1.70 \times 10^{-4})(100)} = \frac{17}{1.7 \times 10^{-2}} = 1000\ ^\circ\text{C}

    T=1000+27=1027 ∘CT = 1000 + 27 = 1027\ ^\circ\text{C}

    Answer: about 1027 °C. The small temperature coefficient means a very large temperature change is needed for only a 17% change in resistance, which is why such alloys are chosen for heating elements.

  4. 4

    Question 4

    A negligibly small current is passed through a wire of length 15 m and uniform cross-section 6.0×10−7 m26.0 \times 10^{-7}\ \text{m}^2, and its resistance is measured to be 5.0 Ω. What is the resistivity of the material at the temperature of the experiment?

    Easy
    3 marks
    Solve with AI
    Written solution

    Class 12 Physics Current Electricity

    R=ρlA⇒ρ=RAl=(5.0)(6.0×10−7)15=2.0×10−7 Ω mR = \frac{\rho l}{A} \quad\Rightarrow\quad \rho = \frac{RA}{l} = \frac{(5.0)(6.0 \times 10^{-7})}{15} = 2.0 \times 10^{-7}\ \Omega\ \text{m}

    The current is kept negligibly small so that the wire does not heat up: a larger current would raise its temperature and change the resistance being measured.

    Answer: ρ=2.0×10−7 Ω\rho = 2.0 \times 10^{-7}\ \Omega m.

  5. 5

    Question 5

    A silver wire has a resistance of 2.1 Ω at 27.5 °C, and a resistance of 2.7 Ω at 100 °C. Determine the temperature coefficient of resistivity of silver.

    Medium
    3 marks
    Solve with AI
    Written solution

    Using R2=R1[1+α(T2−T1)]R_2 = R_1\left[1 + \alpha(T_2 - T_1)\right]:

    α=R2−R1R1(T2−T1)=2.7−2.12.1×(100−27.5)=0.6152.25≈0.0039 ∘C−1\alpha = \frac{R_2 - R_1}{R_1(T_2 - T_1)} = \frac{2.7 - 2.1}{2.1 \times (100 - 27.5)} = \frac{0.6}{152.25} \approx 0.0039\ ^\circ\text{C}^{-1}

    Class 12 Physics Current Electricity

    Answer: α≈3.9×10−3 ∘C−1\alpha \approx 3.9 \times 10^{-3}\ ^\circ\text{C}^{-1}, a typical value for a pure metal. (Alloys such as nichrome have values about twenty times smaller.)

  6. 6

    Question 6

    A heating element using nichrome connected to a 230 V supply draws an initial current of 3.2 A which settles after a few seconds to a steady value of 2.8 A. What is the steady temperature of the heating element if the room temperature is 27.0 °C? Temperature coefficient of resistance of nichrome averaged over the temperature range involved is 1.70×10−4 ∘C−11.70 \times 10^{-4}\ ^\circ\text{C}^{-1}.

    Medium
    5 marks
    Solve with AI
    Written solution

    When first switched on the element is at room temperature; as it heats up its resistance rises and the current falls.

    Resistance at room temperature (27.0 °C):

    R1=VI1=2303.2=71.9 ΩR_1 = \frac{V}{I_1} = \frac{230}{3.2} = 71.9\ \Omega

    Resistance at the steady temperature T2T_2:

    R2=VI2=2302.8=82.1 ΩR_2 = \frac{V}{I_2} = \frac{230}{2.8} = 82.1\ \Omega

    Class 12 Physics Current Electricity

    T2−27.0=R2−R1αR1=82.1−71.9(1.70×10−4)(71.9)≈840 ∘CT_2 - 27.0 = \frac{R_2 - R_1}{\alpha R_1} = \frac{82.1 - 71.9}{(1.70 \times 10^{-4})(71.9)} \approx 840\ ^\circ\text{C}

    T2≈867 ∘CT_2 \approx 867\ ^\circ\text{C}

    Answer: the steady temperature is about 867 °C.

  7. 7

    Question 7

    Determine the current in each branch of the network shown in the figure.

    Class 12 Physics Current Electricity

    Hard
    5 marks
    Solve with AI
    Written solution

    Let the current supplied by the battery be I1I_1, entering the network at A. Take I2I_2 along AB, I1−I2I_1 - I_2 along AD, and I4I_4 along BD (from B to D). Then BC carries I2−I4I_2 - I_4 and DC carries I1−I2+I4I_1 - I_2 + I_4.

    Class 12 Physics Current Electricity

    Loop ABDA (no emf):

    10I2+5I4−5(I1−I2)=0⇒3I2+I4=I1(1)10I_2 + 5I_4 - 5(I_1 - I_2) = 0 \quad\Rightarrow\quad 3I_2 + I_4 = I_1 \qquad (1)

    Loop BCDB (no emf):

    5(I2−I4)−10(I1−I2+I4)−5I4=0⇒3I2−4I4=2I1(2)5(I_2 - I_4) - 10(I_1 - I_2 + I_4) - 5I_4 = 0 \quad\Rightarrow\quad 3I_2 - 4I_4 = 2I_1 \qquad (2)

    Loop through the battery, A → B → C → battery → A:

    10I2+5(I2−I4)+10I1=10⇒3I2−I4+2I1=2(3)10I_2 + 5(I_2 - I_4) + 10I_1 = 10 \quad\Rightarrow\quad 3I_2 - I_4 + 2I_1 = 2 \qquad (3)

    From (1) and (2): subtracting gives 5I4=−I15I_4 = -I_1, so I4=−I15I_4 = -\dfrac{I_1}{5} and I2=2I15I_2 = \dfrac{2I_1}{5}. Then (3) gives

    6I15+I15+2I1=2⇒I1=1017 A\frac{6I_1}{5} + \frac{I_1}{5} + 2I_1 = 2 \quad\Rightarrow\quad I_1 = \frac{10}{17}\ \text{A}

    BranchCurrentDirection
    through the battery (C to A)1017\dfrac{10}{17} Ainto A
    AB417\dfrac{4}{17} AA to B
    AD617\dfrac{6}{17} AA to D
    BC617\dfrac{6}{17} AB to C
    DC417\dfrac{4}{17} AD to C
    BD217\dfrac{2}{17} AD to B (the assumed direction B to D gave I4=−217I_4 = -\frac{2}{17} A)

    Check with potentials (C at 0 V): VA=10−10×1017=7017V_A = 10 - 10 \times \frac{10}{17} = \frac{70}{17} V, VB=7017−10×417=3017V_B = \frac{70}{17} - 10 \times \frac{4}{17} = \frac{30}{17} V, VD=7017−5×617=4017V_D = \frac{70}{17} - 5 \times \frac{6}{17} = \frac{40}{17} V. D is higher than B, so current flows from D to B through the 5 Ω: (40−30)/175=217\frac{(40 - 30)/17}{5} = \frac{2}{17} A. ✓

  8. 8

    Question 8

    A storage battery of emf 8.0 V and internal resistance 0.5 Ω is being charged by a 120 V dc supply using a series resistor of 15.5 Ω. What is the terminal voltage of the battery during charging? What is the purpose of having a series resistor in the charging circuit?

    Medium
    5 marks
    Solve with AI
    Written solution

    Class 12 Physics Current Electricity

    While charging, the supply drives current into the battery's positive terminal, against its emf. The net driving voltage is therefore 120−8=112120 - 8 = 112 V:

    I=120−8.015.5+0.5=11216=7.0 AI = \frac{120 - 8.0}{15.5 + 0.5} = \frac{112}{16} = 7.0\ \text{A}

    Terminal voltage during charging. Current flows through the battery against its emf, so the internal voltage drop adds to the emf:

    V=ε+Ir=8.0+(7.0)(0.5)=11.5 VV = \varepsilon + Ir = 8.0 + (7.0)(0.5) = 11.5\ \text{V}

    (During discharge it would be ε−Ir\varepsilon - Ir, less than the emf.)

    Purpose of the series resistor. Without it the current would be 1120.5=224\dfrac{112}{0.5} = 224 A, which would overheat and damage the battery. The series resistor limits the charging current to a safe value.

  9. 9

    Question 9

    The number density of free electrons in a copper conductor estimated in Example 3.1 is 8.5×1028 m−38.5 \times 10^{28}\ \text{m}^{-3}. How long does an electron take to drift from one end of a wire 3.0 m long to its other end? The area of cross-section of the wire is 2.0×10−6 m22.0 \times 10^{-6}\ \text{m}^2 and it is carrying a current of 3.0 A.

    Medium
    5 marks
    Solve with AI
    Written solution

    Drift speed

    vd=IneA=3.0(8.5×1028)(1.6×10−19)(2.0×10−6)=1.1×10−4 m/sv_d = \frac{I}{neA} = \frac{3.0}{(8.5 \times 10^{28})(1.6 \times 10^{-19})(2.0 \times 10^{-6})} = 1.1 \times 10^{-4}\ \text{m/s}

    Class 12 Physics Current Electricity

    Time to drift 3.0 m

    t=lvd=3.01.1×10−4≈2.7×104 s≈7.5 hourst = \frac{l}{v_d} = \frac{3.0}{1.1 \times 10^{-4}} \approx 2.7 \times 10^{4}\ \text{s} \approx 7.5\ \text{hours}

    Yet a lamp lights the instant it is switched on. The electric field that sets all the free electrons drifting travels along the wire at nearly the speed of light; the electrons themselves only creep.

Inside Ch 3

What Class 12 Physics Ch 3 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Electric Current
  2. 02Electric Current In Conductors
  3. 03Ohm's Law
  4. 04Drift Of Electrons And The Origin Of Resistivity
  5. 05Limitations Of Ohm's Law
  6. 06Resistivity Of Various Materials
  7. 07Temperature Dependence Of Resistivity
From the board papers

Ch 3 in past CBSE papers

The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.

  1. 1

    Board paper question 1

    Kirchhoff's first rule ∑I=0\sum I = 0 and second rule ∑IR=∑E\sum IR = \sum E (where the symbols have their usual meanings) are respectively based on

    MCQEasyAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) conservation of momentum and conservation of charge

    • (B) conservation of energy and conservation of charge

    • (C) conservation of charge and conservation of momentum

    • (D) conservation of charge and conservation of energy

      Correct

    Option (D) is correct.

    Explanation:

    • Junction rule, ∑I=0\sum I = 0: charge cannot pile up at a junction in a steady state, so whatever flows in must flow out. This is conservation of charge.
    • Loop rule, ∑IR=∑E\sum IR = \sum E: a charge taken once round a closed loop returns to its starting potential, so the energy it gains from the emfs equals the energy it loses in the resistors. This is conservation of energy.

    Class 12 Physics Current Electricity

  2. 2

    Board paper question 2

    The electric power consumed by a 220 V – 100 W bulb when operated at 110 V is

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) 25 W

      Correct
    • (B) 30 W

    • (C) 35 W

    • (D) 45 W

    Option (A) is correct.

    Explanation: The rating fixes the bulb's resistance (taking it as constant):

    R=V2P=2202100=484 ΩR = \frac{V^2}{P} = \frac{220^2}{100} = 484\ \Omega

    At 110 V:

    P′=V′2R=1102484=25 WP' = \frac{V'^2}{R} = \frac{110^2}{484} = 25\ \text{W}

    Shortcut: P∝V2P \propto V^2 for a fixed resistance, so halving the voltage gives one-quarter of the power, 1004=25\frac{100}{4} = 25 W.

  3. 3

    Board paper question 3

    A potential difference of 200 V is maintained across a conductor of resistance 100 Ω100\ \Omega. The number of electrons passing through it in 1 s is

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) 1.25×10191.25 \times 10^{19}

      Correct
    • (B) 2.5×10182.5 \times 10^{18}

    • (C) 1.25×10181.25 \times 10^{18}

    • (D) 2.5×10162.5 \times 10^{16}

    Option (A) is correct.

    Explanation:

    I=VR=200100=2 AI = \frac{V}{R} = \frac{200}{100} = 2\ \text{A}

    A current of 2 A means 2 C of charge passes each second. Each electron carries 1.6×10−191.6 \times 10^{-19} C:

    n=Ite=2×11.6×10−19=1.25×1019n = \frac{It}{e} = \frac{2 \times 1}{1.6 \times 10^{-19}} = 1.25 \times 10^{19}

  4. 4

    Board paper question 4

    In a dc circuit the direction of current inside the battery and outside the battery respectively are

    MCQEasyAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) positive to negative terminal and negative to positive terminal

    • (B) positive to negative terminal and positive to negative terminal

    • (C) negative to positive terminal and positive to negative terminal

      Correct
    • (D) negative to positive terminal and negative to positive terminal

    Option (C) is correct.

    Explanation: Conventional current is the direction in which positive charge moves.

    • Outside the battery, charge flows "downhill" in potential: from the positive terminal, through the external circuit, to the negative terminal.
    • Inside the battery, the chemical (non-electrostatic) force pushes the charge "uphill", from the negative terminal to the positive terminal, completing the loop.

    Class 12 Physics Current Electricity

  5. 5

    Board paper question 5

    A car battery is charged by a 12 V supply, and the energy stored in it is 7.20×1057.20 \times 10^{5} J. The charge passed through the battery is

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) 6.0×1046.0 \times 10^{4} C

      Correct
    • (B) 5.8×1035.8 \times 10^{3} C

    • (C) 8.64×1068.64 \times 10^{6} C

    • (D) 1.6×1051.6 \times 10^{5} C

    Option (A) is correct.

    Explanation: Energy transferred when a charge QQ moves through a potential difference VV is W=QVW = QV:

    Q=WV=7.20×10512=6.0×104 CQ = \frac{W}{V} = \frac{7.20 \times 10^{5}}{12} = 6.0 \times 10^{4}\ \text{C}

    (That is 6.0×1043600≈16.7\dfrac{6.0 \times 10^4}{3600} \approx 16.7 ampere-hours.)

  6. 6

    Board paper question 6

    If nn, ee, τ\tau and mm have their usual meanings, then the resistance of a wire of length ll and cross-sectional area AA is given by

    MCQMediumAsked 2022
    1 mark
    Solve with AI
    Answer
    • (A) ne2A2mτl\dfrac{ne^2A}{2m\tau l}

    • (B) mlne2τA\dfrac{ml}{ne^2\tau A}

      Correct
    • (C) mτAne2l\dfrac{m\tau A}{ne^2 l}

    • (D) ne2τA2ml\dfrac{ne^2\tau A}{2ml}

    Option (B) is correct.

    Explanation: With a potential difference VV across the wire, the field is E=V/lE = V/l and the drift speed is

    vd=eEτm=eVτmlv_d = \frac{eE\tau}{m} = \frac{eV\tau}{ml}

    The current is

    I=neAvd=ne2Aτml VI = neAv_d = \frac{ne^2A\tau}{ml}\,V

    R=VI=mlne2τAR = \frac{V}{I} = \frac{ml}{ne^2\tau A}

    This is R=ρlAR = \rho\dfrac{l}{A} with ρ=mne2τ\rho = \dfrac{m}{ne^2\tau}: more collisions (smaller τ\tau) or fewer free electrons (smaller nn) mean higher resistivity.

All 37 board paper questions for this chapter, solved the same way.

Common questions

Class 12 Physics Ch 3 questions students ask

How many questions are there in Class 12 Physics Ch 3?

9 questions. Every one is solved step by step on this page.

Are these Class 12 Physics solutions free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 12 Physics Ch 3 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.