Opening your dashboard
Class 12 Physics Chapter 3 Current Electricity: Previous Year Questions
37 questions on Chapter 3, each solved step by step. Class 12 Physics, CBSE 2026-27.
37 questions with solutions
1–5 marks · Mixed difficulty
The first 34 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.
- 11 mark
Question 1
Kirchhoff's first rule and second rule (where the symbols have their usual meanings) are respectively based on
Solve with AIAnswer
(A) conservation of momentum and conservation of charge
(B) conservation of energy and conservation of charge
(C) conservation of charge and conservation of momentum
- Correct
(D) conservation of charge and conservation of energy
Option (D) is correct.
Explanation:
- Junction rule, : charge cannot pile up at a junction in a steady state, so whatever flows in must flow out. This is conservation of charge.
- Loop rule, : a charge taken once round a closed loop returns to its starting potential, so the energy it gains from the emfs equals the energy it loses in the resistors. This is conservation of energy.

- 21 mark
Question 2
The electric power consumed by a 220 V – 100 W bulb when operated at 110 V is
Solve with AIAnswer
- Correct
(A) 25 W
(B) 30 W
(C) 35 W
(D) 45 W
Option (A) is correct.
Explanation: The rating fixes the bulb's resistance (taking it as constant):
At 110 V:
Shortcut: for a fixed resistance, so halving the voltage gives one-quarter of the power, W.
- 31 mark
Question 3
A potential difference of 200 V is maintained across a conductor of resistance . The number of electrons passing through it in 1 s is
Solve with AIAnswer
- Correct
(A)
(B)
(C)
(D)
Option (A) is correct.
Explanation:
A current of 2 A means 2 C of charge passes each second. Each electron carries C:
- 41 mark
Question 4
In a dc circuit the direction of current inside the battery and outside the battery respectively are
Solve with AIAnswer
(A) positive to negative terminal and negative to positive terminal
(B) positive to negative terminal and positive to negative terminal
- Correct
(C) negative to positive terminal and positive to negative terminal
(D) negative to positive terminal and negative to positive terminal
Option (C) is correct.
Explanation: Conventional current is the direction in which positive charge moves.
- Outside the battery, charge flows "downhill" in potential: from the positive terminal, through the external circuit, to the negative terminal.
- Inside the battery, the chemical (non-electrostatic) force pushes the charge "uphill", from the negative terminal to the positive terminal, completing the loop.

- 51 mark
Question 5
A car battery is charged by a 12 V supply, and the energy stored in it is J. The charge passed through the battery is
Solve with AIAnswer
- Correct
(A) C
(B) C
(C) C
(D) C
Option (A) is correct.
Explanation: Energy transferred when a charge moves through a potential difference is :
(That is ampere-hours.)
- 61 mark
Question 6
If , , and have their usual meanings, then the resistance of a wire of length and cross-sectional area is given by
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation: With a potential difference across the wire, the field is and the drift speed is
The current is
This is with : more collisions (smaller ) or fewer free electrons (smaller ) mean higher resistivity.
- 71 mark
Question 7
Two sources of equal emf are connected in series. This combination is connected to an external resistance . The internal resistances of the two sources are and . If the potential difference across the source of internal resistance is zero, then equals
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation:

The total emf is and the total resistance is :
The terminal voltage of the second source is . Setting it to zero:
(This needs , as given; otherwise no positive would work.)
- 81 mark
Question 8
The equivalent resistance between A and B of the network shown in the figure is
Solve with AIAnswer
(A)
(B)
- Correct
(C)
(D)
Option (C) is correct.
Explanation: Look at the right-hand resistor: the vertical wire joins its two ends directly. The two ends are therefore at the same potential, and no current flows through the resistor. It is short-circuited and can be removed.

What remains is the upper and the lower in series, joined through the connecting wire:
- 91 mark
Question 9
A current of 0.8 A flows in a conductor of for 1 minute. The heat produced in the conductor will be
Solve with AIAnswer
(A) 1445 J
- Correct
(B) 1536 J
(C) 1569 J
(D) 1640 J
Option (B) is correct.
Explanation: By Joule's law of heating, with min s:
- 101 mark
Question 10
A cell of emf is connected across an external resistance . When a current is drawn from the cell, the potential difference across the electrodes of the cell drops to . The internal resistance of the cell is
Solve with AIAnswer
(A)
(B)
(C)
- Correct
(D)
Option (D) is correct.
Explanation: The terminal voltage is , so . The same current flows through , with , i.e. :

(C) keeps both and , which is dimensionally wrong (it has units of ).
- 111 mark
Question 11
A steady current of 8 mA flows through a wire. The number of electrons passing through a cross-section of the wire in 10 s is
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation: The charge passing in 10 s is C, so
- 121 mark
Question 12
A conductor of is connected across a 6 V ideal source. The power supplied by the source to the conductor is
Solve with AIAnswer
(A) 1.8 W
(B) 2.4 W
- Correct
(C) 3.6 W
(D) 7.2 W
Option (C) is correct.
Explanation: An ideal source has no internal resistance, so the full 6 V appears across the conductor:
- 131 mark
Question 13
The current in a device varies with time as , where is in mA and is in s. The amount of charge that passes through the device during s to s is
Solve with AIAnswer
(A) 10 mC
(B) 18 mC
- Correct
(C) 27 mC
(D) 54 mC
Option (C) is correct.
Explanation: Since , the charge is the area under the current–time graph:

The graph is a straight line from 0 to 18 mA, so the area is a triangle: mC. (B) multiplies the final current by the time, as if the current had been 18 mA throughout.
- 141 mark
Question 14
Power is dissipated through a series combination and power is dissipated through the parallel combination of 3 equal resistors, each connected to the same source. The ratio of to is
Solve with AIAnswer
- Correct
(A)
(B) 1
(C) 6
(D) 9
Option (A) is correct.
Explanation: Let each resistor be , connected across the same voltage .
- Series: , so .
- Parallel: , so .

(D), 9, is the inverse ratio : the parallel combination has one-ninth the resistance and so draws nine times the power.
- 151 mark
Question 15
The masses of two cylindrical wires of copper are in the ratio 1 : 3 and their lengths are in the ratio 5 : 3. The ratio of their resistances will be
Solve with AIAnswer
- Correct
(A) 25 : 3
(B) 2 : 5
(C) 2 : 3
(D) 3 : 5
Option (A) is correct.
Explanation: For a wire of mass , length and density , the volume is , so and
(both wires are copper, so and are the same).
- 161 mark
Question 16
What is the balance condition of the following Wheatstone bridge?
Solve with AIWritten solution
The bridge is balanced when no current flows through the galvanometer G. The condition is
At balance the two ends of the galvanometer are at the same potential, so the ratio of the resistances in the upper arm equals the ratio in the lower arm.
- 171 mark
Question 17
What is mobility?
Solve with AIWritten solution
Mobility of a charge carrier is the magnitude of its drift velocity per unit electric field:
For electrons, , so
where is the relaxation time and the electron mass. Its SI unit is .
- 181 mark
Question 18
What is drift velocity? What is the relation between drift velocity and current?
Solve with AIWritten solution
Drift velocity is the average velocity with which the free electrons in a conductor move under an applied electric field. It is superimposed on their much faster random thermal motion and points opposite to the field:
where is the relaxation time (average time between collisions).

Relation with current. In a conductor of cross-sectional area with free electrons per unit volume, the charge crossing any section per second is
- 192 marks
Question 19
What is the amount of current flowing through the galvanometer of a balanced Wheatstone bridge?
Solve with AIWritten solution
Zero.
A Wheatstone bridge is balanced when the two points to which the galvanometer is connected are at the same potential. With no potential difference across it, no current flows through the galvanometer, which is why it shows no deflection. This happens when the resistances satisfy .
- 202 marks
Question 20
What is the other name of Kirchhoff's voltage rule?
Solve with AIWritten solution
It is also called the loop rule (or Kirchhoff's voltage law, KVL).
- "Loop rule", because it is applied round any closed loop of a circuit.
- It states that the algebraic sum of the emfs and the potential drops () round a closed loop is zero, . It follows from the conservation of energy.
- 212 marks
Question 21
Use Kirchhoff's rules to obtain the balance condition for a Wheatstone bridge.
Solve with AIWritten solution

Let the currents be in AB (resistance ), in AD (), and in the galvanometer BD (resistance ). Then BC () carries and DC () carries .
Loop ABDA:
Loop BCDB:
At balance , so these become
Dividing one by the other:
This is the balance condition ( in the usual notation).
- 222 marks
Question 22
State the two Kirchhoff's rules. Explain briefly how these rules are justified.
Solve with AIWritten solution
(i) Junction rule: at any junction, the sum of the currents entering equals the sum of the currents leaving ().
Justification: in the steady state, charge does not accumulate at a junction, so the charge flowing in per second equals the charge flowing out. This is conservation of charge.
(ii) Loop rule: round any closed loop, the algebraic sum of the changes in potential (emfs and drops) is zero ().
Justification: the electrostatic potential at a point has a single value, so a charge taken round a closed loop returns to the same potential. The energy it gains from the emfs equals the energy it loses in the resistors. This is conservation of energy.
- 233 marks
Question 23
Using Kirchhoff's laws, calculate the current flowing through the , and resistors in the circuit shown.
Solve with AIWritten solution
Take S as the reference. The 10 V cell makes P 10 V above S, and the 6 V cell makes R 6 V above S (the + terminals face P and R). Let flow from P to Q through , from R to Q through , and from Q to S through .
Junction Q:
Loop S → P → Q → S (10 V cell, , ):
Loop S → R → Q → S (6 V cell, , ):
Solving: from (1), ; substituting in (2), , so A and A.

Resistor Current (P to Q) A (R to Q) A (Q to S) A Check: V; then V gives V ✓, and V gives V ✓.
- 243 marks
Question 24
Using Kirchhoff's rules, calculate the current through the and resistors in the following circuit.
Solve with AIWritten solution
Let flow in the top branch (80 V cell and , from A to B) and in the middle branch (, from D to C). The bottom branch (40 V cell and ) carries from C/F back to E.
Loop ABCDA (80 V cell, , ):
Loop DCFED (, , 40 V cell):
Subtracting (1) from (2): , so
Resistor Current 0 4 A No current flows through the resistor because its two ends are at the same potential: the 80 V cell with its drop () and the 40 V cell with its drop () both leave the right-hand side at the potential of the left-hand side.
- 253 marks
Question 25
Calculate the potential difference across the resistor in the given electrical circuit, using Kirchhoff's rules.
Solve with AIWritten solution
Let flow through the 8 V, branch (from B to A), through the 6 V, branch (from C to D), and through the resistor (from E to F).
Junction (left side):
Loop ABCDA (the two cell branches):
Loop DEFCD ( and the 6 V branch):
Multiplying (1) by 5 and adding (2): , so A, and then A.
Potential difference across :
- 263 marks
Question 26
Using Kirchhoff's rules, calculate the potential difference between B and D in the circuit shown.
Solve with AIWritten solution
Let flow along D → A → B, along D → C → B, and along the diagonal B → D through .
Loop DABD (1 V cell with , 2 V cell with , diagonal ):
Loop DCBD (3 V cell with , 1 V cell with , diagonal):
Solving: A and A.
Current in the diagonal:
The minus sign means that A actually flows from D to B.
D is at the higher potential, since current flows from D to B through the resistor.
- 273 marks
Question 27
Using Kirchhoff's rules, calculate the potential difference between B and D in the circuit shown in the figure.
(i) Write the two loop equations.
(ii) Find the current through DB.
(iii) Find the potential difference between B and D.
Solve with AIWritten solution
(i) Loop equations. Let flow along D → A → B, along D → C → B, and from B to D through the diagonal.
Loop DABD:
Loop DCBD:
(ii) Solving, A and A, so the current through DB is
i.e. A flows from D to B.
(iii)
with D at the higher potential.
- 283 marks
Question 28
The voltmeter and the ammeter connected in the circuit shown are ideal. Taking (so the resistors are and ), what will be their readings?
Solve with AIWritten solution
Ideal meters: the voltmeter draws no current, so the branch E–H carries no current. The ammeter has no resistance, so it drops no voltage.
The left side (F, G, A) is one junction and the right side (D, C, B) is another. Take the left side as 0 V. Three branches join them.
Bottom branch (6 V cell and ammeter, no resistance): it fixes the right side at
Middle branch (C → 4 V cell → H → → G): the 4 V cell raises H to V, so the current through the resistor, from H to G, is
Top branch (D → → E → 2 V cell → F): the 2 V cell has its positive terminal at F, so V. The current through the resistor, from D to E, is

Ammeter reading. Both currents arrive at the left junction and return through the bottom branch:
Voltmeter reading (between E and H):
Answer: the ammeter reads A and the voltmeter reads 12 V.
- 293 marks
Question 29
A potential difference is applied across a conductor of length and cross-sectional area . Briefly explain how the current density in the conductor will be affected if
(a) the potential difference is doubled.
(b) the conductor is gradually stretched to reduce its cross-sectional area to , and then the same potential difference is applied across it.
Solve with AIWritten solution
Current density is . With :
It depends only on , the length and the resistivity , not on the area.
(a) doubled: . The current density doubles.
(b) Stretching keeps the volume fixed, so if the area halves the length doubles to :
The current density is halved. (The field inside, , is halved, so the drift speed and are halved.)
- 302 marks
Question 30
A battery of emf and internal resistance , when connected across an external resistance of , produces a current of 0.5 A. When connected across a resistance of , it produces a current of 0.25 A. Find (i) the emf and (ii) the internal resistance of the cell.
Solve with AIWritten solution
In each case .
Case 1:
Case 2:

Equating (1) and (2):
Answer: (i) V; (ii) .
- 315 marks
Question 31
(i) Explain how free electrons in a metal at constant temperature attain an average velocity under the action of an electric field. Hence obtain an expression for it.
(ii) Consider two conducting wires A and B of the same diameter but made of different materials, joined in series across a battery. The number density of electrons in A is 1.5 times that in B. Find the ratio of the drift velocity of electrons in wire A to that in wire B.
Solve with AIWritten solution
(i) In the absence of a field, the free electrons move randomly with thermal speeds and collide with the ions of the lattice; their velocities average to zero, so there is no net flow.
When a field is applied, each electron feels a force and is accelerated:

Consider an electron with velocity just after its last collision, a time ago. Its velocity now is . Averaging over all the electrons, the average of the is zero (random directions) and the average of the is the relaxation time :
The collisions keep "resetting" the electrons, so instead of speeding up indefinitely they settle to this constant average (drift) velocity, opposite to the field.
(ii) The wires are in series, so they carry the same current . Their diameters are equal, so their cross-sectional areas are equal. From :
- 325 marks
Question 32
(i) A cell of emf and internal resistance is connected across a variable load resistance . Draw plots showing the variation of the terminal voltage with (a) and (b) the current in the load.
(ii) Three cells, each of emf but with internal resistances , and , are connected in parallel across a resistor . Obtain expressions for (a) the current flowing in the circuit, and (b) the terminal potential difference across the equivalent cell.
Solve with AIWritten solution
(i) The current is and the terminal voltage is
(a) against : when (short circuit) and rises towards as .
(b) against : is a straight line with intercept on the -axis and slope ; it reaches at the short-circuit current .

(ii) For cells in parallel,

The three cells act like one cell of emf and internal resistance .
(a) Current:
(b) Terminal potential difference:
- 335 marks
Question 33
Determine the current in each branch of the network shown in the figure.
Solve with AIWritten solution
The 10 V cell (internal resistance ) drives a current into A. Let flow along AB, so flows along AD. Let the 5 V cell carry from B to D.

Then BC carries , and DC carries .
Loop A → B → D → A (5 V cell drives current from B to D):
Loop B → C → D → B:
Loop through the 10 V cell, C → A → B → C:
Solving (1)–(3): A, A, A.
Branch Current Direction 10 V cell and 2.5 A C to A AB () 1.875 A A to B AD () 0.625 A A to D BD (5 V cell) 1.875 A B to D BC () 0 — DC () 2.5 A D to C Check with potentials (C at 0 V): V; V, the same as C, so no current in BC ✓; V, which is 5 V above B, as the 5 V cell requires ✓.
- 345 marks
Question 34
(a) Define drift velocity. Derive the expression for electric current in terms of drift velocity.
(b) For two cells connected in parallel, derive the expression for the potential difference between A and B.
Solve with AIWritten solution
(a) Drift velocity is the average velocity acquired by the free electrons of a conductor under an applied electric field (opposite to the field), superimposed on their random thermal motion.
Consider a conductor of cross-sectional area with free electrons per unit volume, all drifting with speed . In a time , every electron within a distance of a cross-section crosses it. That is the electrons in a volume :

(b) Let cell 1 (, ) and cell 2 (, ) be in parallel between A and B, supplying currents and , and let be the potential difference between A and B. For each cell, :
The external current is :
Solving for :
Comparing with , the pair behaves as a single cell with
- 355 marks
Question 35
(a) State the two Kirchhoff's rules used in the analysis of electric circuits and explain them.
(b) Using Kirchhoff's rules, derive the condition for balance of a Wheatstone bridge.
- 361 mark
Question 36
Assertion (A): Copper and aluminium are the two metals most commonly used for carrying electric current.
Reason (R): Conductors are those substances in which electric charge can flow freely.
- 371 mark
Question 37
Assertion (A): In a series grouping of resistances, the equivalent resistance is greater than even the biggest resistance in the series.
Reason (R): In a series arrangement, the equivalent resistance is given by
