Opening your dashboard
Class 12 Chemistry Chapter 8: Aldehydes, Ketones and Carboxylic Acids Solutions
28 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 8, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
28 questions with solutions
2–11 marks · Mixed difficulty
- 110 marks
Question 1
What is meant by the following terms? Give an example of the reaction in each case.
(i) Cyanohydrin (ii) Acetal (iii) Semicarbazone (iv) Aldol (v) Hemiacetal
(vi) Oxime (vii) Ketal (viii) Imine (ix) 2,4-DNP-derivative (x) Schiff's base
Solve with AIWritten solution
All ten terms are products of nucleophilic addition to the carbonyl group of an aldehyde or ketone. In (i), (ii), (iv), (v) and (vii) the adduct is kept; in (iii), (vi), (viii), (ix) and (x) the adduct loses a molecule of water to give a compound.
(i) Cyanohydrin – a compound with an –OH and a –CN group on the same carbon, formed when HCN adds to C=O. The reaction is slow with pure HCN and is catalysed by a base, which generates the stronger nucleophile .
Product: ethanal cyanohydrin (2-hydroxypropanenitrile).
(ii) Acetal – a gem-dialkoxy compound formed when an aldehyde reacts with two molecules of a monohydric alcohol in the presence of dry HCl (through the hemiacetal).
Product: 1,1-diethoxyethane (acetaldehyde diethyl acetal).
(iii) Semicarbazone – the derivative formed from an aldehyde or ketone and semicarbazide in weakly acidic medium.
Product: propanone semicarbazone.
(iv) Aldol – a β-hydroxy aldehyde (or β-hydroxy ketone, ketol) formed when two molecules of an aldehyde or ketone having at least one α-hydrogen combine in dilute alkali (aldol reaction).
Product: 3-hydroxybutanal (aldol). On heating it loses water to give but-2-enal.
(v) Hemiacetal – an alkoxy alcohol formed when an aldehyde adds one molecule of alcohol (dry HCl). It is the intermediate on the way to the acetal.
Product: 1-ethoxyethan-1-ol.

(vi) Oxime – the compound formed from an aldehyde or ketone and hydroxylamine in weakly acidic medium.
Product: propanone oxime (acetoxime).
(vii) Ketal – the gem-dialkoxy compound of a ketone. With ethylene glycol and dry HCl a ketone gives a cyclic ethylene glycol ketal.
Product: 2,2-dimethyl-1,3-dioxolane. Acetals and ketals are hydrolysed back to the carbonyl compound by aqueous mineral acid.
(viii) Imine – any compound containing the group, formed from an aldehyde or ketone and ammonia or a primary amine ( = H gives an imine, = alkyl/aryl gives a substituted imine).
Product: N-methylpropan-2-imine.
(ix) 2,4-DNP-derivative – the 2,4-dinitrophenylhydrazone formed from an aldehyde or ketone and 2,4-dinitrophenylhydrazine (Brady's reagent). It is a yellow-orange to red solid, so its formation is a test for the C=O group.
Product: ethanal 2,4-dinitrophenylhydrazone.
(x) Schiff's base – a substituted imine (R = alkyl or aryl) formed from an aldehyde or ketone and a primary amine in the presence of a trace of acid.
Product: N-benzylideneaniline.

- 27 marks
Question 2
Name the following compounds according to the IUPAC system of nomenclature:
(i) (ii)
(iii) (iv)
(v) (vi)
(vii) -p
Solve with AIWritten solution
Rules used: the parent chain must contain the principal group; the carbon of –CHO or –COOH is always C-1; a ketone chain is numbered to give the C=O carbon the lowest locant, then the substituents.
IUPAC name Reason (i) 4-Methylpentanal five-carbon chain, CHO carbon = C-1, methyl on C-4 (ii) 6-Chloro-4-ethylhexan-3-one longest chain (6 C) runs from the end through C=O to ; C=O at C-3, ethyl at C-4, Cl at C-6 (iii) But-2-enal four carbons, CHO = C-1, C=C between C-2 and C-3 (iv) Pentane-2,4-dione two C=O groups on C-2 and C-4 of a five-carbon chain (v) 3,3,5-Trimethylhexan-2-one numbering from the end puts C=O at C-2; methyls at 3, 3 and 5 (vi) 3,3-Dimethylbutanoic acid COOH carbon = C-1; two methyls on C-3 (vii) Benzene-1,4-dicarbaldehyde two –CHO groups para on a benzene ring (common name terephthalaldehyde) 
Check on (ii): going through the ethyl branch would give only a five-carbon chain, so the six-carbon chain ending in is the parent, and the group becomes the 4-ethyl substituent.
- 38 marks
Question 3
Draw the structures of the following compounds.
(i) 3-Methylbutanal (ii) p-Nitropropiophenone
(iii) p-Methylbenzaldehyde (iv) 4-Methylpent-3-en-2-one
(v) 4-Chloropentan-2-one (vi) 3-Bromo-4-phenylpentanoic acid
(vii) p,p'-Dihydroxybenzophenone (viii) Hex-2-en-4-ynoic acid
Solve with AIWritten solution
Read each name from the end: the suffix fixes the principal group and the parent chain, the prefixes give the substituents and their positions.
Name Condensed formula (i) 3-Methylbutanal (ii) p-Nitropropiophenone (NO para to the C=O) (iii) p-Methylbenzaldehyde (para) (iv) 4-Methylpent-3-en-2-one (v) 4-Chloropentan-2-one (vi) 3-Bromo-4-phenylpentanoic acid (vii) p,p'-Dihydroxybenzophenone (each OH para) (viii) Hex-2-en-4-ynoic acid 
Points to notice:
- (ii) Propiophenone is (1-phenylpropan-1-one); the p-nitro group sits on the ring opposite the C=O.
- (v) C-3 is a group: every carbon of the chain must have four bonds.
- (viii) Counting from COOH (C-1): C=C between C-2 and C-3, C≡C between C-4 and C-5, C-6 is the .
- 46 marks
Question 4
Write the IUPAC names of the following ketones and aldehydes. Wherever possible, give also common names.
(i) (ii)
(iii) (iv)
(v) the compound drawn below (vi)
Solve with AIWritten solution
IUPAC name Common name (i) Heptan-2-one methyl n-pentyl ketone (ii) 4-Bromo-2-methylhexanal γ-bromo-α-methylcaproaldehyde (iii) Heptanal n-heptaldehyde (iv) 3-Phenylprop-2-enal cinnamaldehyde (β-phenylacrolein) (v) Cyclopentanecarbaldehyde no common name (vi) Diphenylmethanone benzophenone 
Reasons:
- (i) Seven-carbon chain; numbering from the end gives C=O the locant 2.
- (ii) CHO carbon = C-1, so is C-2 and CHBr is C-4 of a six-carbon chain. In the common name the Greek letters count from the carbon next to CHO: α = C-2 (methyl), γ = C-4 (bromo); caproaldehyde is the aldehyde.
- (iv) Three-carbon chain with CHO = C-1, C=C between C-2 and C-3, phenyl on C-3.
- (v) When –CHO is attached to a ring, the suffix -carbaldehyde is added to the name of the ring.
- (vi) The C=O carbon is the only chain carbon (methanone) and carries two phenyl groups.
- 56 marks
Question 5
Draw structures of the following derivatives.
(i) The 2,4-dinitrophenylhydrazone of benzaldehyde
(ii) Cyclopropanone oxime
(iii) Acetaldehydedimethylacetal
(iv) The semicarbazone of cyclobutanone
(v) The ethylene ketal of hexan-3-one
(vi) The methyl hemiacetal of formaldehyde
Solve with AIWritten solution
Each derivative comes from the carbonyl compound named in it: the C=O oxygen is replaced (–N= derivatives) or the C=O adds one or two alkoxy groups (hemiacetal, acetal, ketal).
Made from Structure (i) + 2,4-DNPH (NO at 2 and 4) (ii) cyclopropanone + three-membered ring with on one ring carbon (iii) + 2 (1,1-dimethoxyethane) (iv) cyclobutanone + four-membered ring with (v) + 2-ethyl-2-propyl-1,3-dioxolane (vi) HCHO + one (methoxymethanol) 
Points to notice:
- (v) The two O atoms of ethylene glycol and the former C=O carbon form a five-membered ring; C-3 of hexan-3-one keeps its ethyl and propyl groups.
- (vi) A hemiacetal has one –OH and one –OR on the same carbon; an acetal, as in (iii), has two –OR groups.
- 65 marks
Question 6
Predict the products formed when cyclohexanecarbaldehyde reacts with the following reagents.
(i) PhMgBr and then (ii) Tollens' reagent
(iii) Semicarbazide and weak acid (iv) Excess ethanol and acid
(v) Zinc amalgam and dilute hydrochloric acid
Solve with AIWritten solution
Cyclohexanecarbaldehyde is , an aldehyde whose CHO group is attached to a cyclohexane ring.
(i) The Grignard reagent adds across C=O ( to carbon, MgBr to oxygen); hydrolysis gives a secondary alcohol.
Product: cyclohexyl(phenyl)methanol.
(ii) Tollens' reagent oxidises the aldehyde to the carboxylate ion and deposits a silver mirror.
Product: cyclohexanecarboxylate ion (cyclohexanecarboxylic acid after acidification).
(iii) The free –NH of semicarbazide condenses with C=O.
Product: cyclohexanecarbaldehyde semicarbazone.
(iv) Two molecules of ethanol add (through the hemiacetal) to give the acetal.
Product: cyclohexanecarbaldehyde diethyl acetal, (diethoxymethyl)cyclohexane.
(v) Clemmensen reduction converts C=O into .
Product: methylcyclohexane.

- 710 marks
Question 7
Which of the following compounds would undergo aldol condensation, which the Cannizzaro reaction and which neither? Write the structures of the expected products of aldol condensation and Cannizzaro reaction.
(i) Methanal (ii) 2-Methylpentanal (iii) Benzaldehyde
(iv) Benzophenone (v) Cyclohexanone (vi) 1-Phenylpropanone
(vii) Phenylacetaldehyde (viii) Butan-1-ol (ix) 2,2-Dimethylbutanal
Solve with AIWritten solution
Deciding rule:
- An aldehyde or ketone with at least one α-hydrogen undergoes aldol condensation with dilute alkali.
- An aldehyde with no α-hydrogen undergoes the Cannizzaro reaction with concentrated alkali.
- A ketone with no α-hydrogen, or a compound that is not a carbonyl compound, does neither.
Compound α-H? Reaction (i) HCHO none Cannizzaro (ii) one Aldol (iii) none Cannizzaro (iv) none (ketone) Neither (v) cyclohexanone four Aldol (vi) two Aldol (vii) two Aldol (viii) not a carbonyl Neither (ix) none (α-C is quaternary) Cannizzaro Aldol products (dilute NaOH). The α-carbon of one molecule bonds to the C=O carbon of another (both carbons highlighted); on heating the β-hydroxy compound loses water if its α-carbon still carries a hydrogen.
- (ii) 3-Hydroxy-2,4-dimethyl-2-propylheptanal, . Its α-carbon has no H left, so it cannot dehydrate to an α,β-unsaturated aldehyde.
- (v) 2-(1-Hydroxycyclohexyl)cyclohexan-1-one; on heating, 2-cyclohexylidenecyclohexan-1-one.
- (vi) 3-Hydroxy-2-methyl-1,3-diphenylpentan-1-one; on heating, 2-methyl-1,3-diphenylpent-2-en-1-one.
- (vii) 3-Hydroxy-2,4-diphenylbutanal; on heating, 2,4-diphenylbut-2-enal.

Cannizzaro products (concentrated NaOH): one molecule is reduced to the alcohol, the other oxidised to the sodium carboxylate.
Products: (i) methanol + sodium methanoate; (iii) phenylmethanol + sodium benzoate; (ix) 2,2-dimethylbutan-1-ol + sodium 2,2-dimethylbutanoate.

Neither: benzophenone (iv) is a ketone with no α-hydrogen, so it can neither form an enolate (aldol) nor act as a hydride donor (Cannizzaro is a reaction of aldehydes). Butan-1-ol (viii) has no carbonyl group at all.
- 83 marks
Question 8
How will you convert ethanal into the following compounds?
(i) Butane-1,3-diol (ii) But-2-enal (iii) But-2-enoic acid
Solve with AIWritten solution
All three start with the aldol reaction of ethanal, which joins two units into a chain:
(i) Butane-1,3-diol: reduce the CHO group of the aldol (3-hydroxybutanal) with (or /Ni).
(ii) But-2-enal: heat the aldol; it loses water between the α-carbon and the β-carbon (aldol condensation).
(iii) But-2-enoic acid: oxidise but-2-enal with a mild oxidant such as Tollens' reagent, which attacks only the CHO group and leaves the C=C intact; then acidify.

A strong oxidant such as hot must not be used in (iii): it would also cleave the C=C bond.
- 94 marks
Question 9
Write structural formulas and names of four possible aldol condensation products from propanal and butanal. In each case, indicate which aldehyde acts as nucleophile and which as electrophile.
Solve with AIWritten solution
In dilute alkali each aldehyde can lose an α-hydrogen to form a carbanion (enolate) – the nucleophile – which attacks the C=O carbon of a second molecule – the electrophile. With two aldehydes there are combinations.
- Propanal as nucleophile gives the fragment .
- Butanal as nucleophile gives the fragment .
- The electrophile becomes the part, with R = (propanal) or (butanal).
Nucleophile Electrophile Aldol product Name A propanal propanal 3-hydroxy-2-methylpentanal B butanal butanal 2-ethyl-3-hydroxyhexanal C propanal butanal 3-hydroxy-2-methylhexanal D butanal propanal 2-ethyl-3-hydroxypentanal On heating, each aldol loses water to give the α,β-unsaturated aldehyde (the aldol condensation product): A → 2-methylpent-2-enal, B → 2-ethylhex-2-enal, C → 2-methylhex-2-enal, D → 2-ethylpent-2-enal.

Naming check for C: the chain runs CHO (C-1) → CH(CH) (C-2) → CH(OH) (C-3) → the three carbons of the propyl group from butanal (C-4 to C-6), so the parent is hexanal. In D the electrophile contributes only an ethyl group, so the chain is five carbons long: pentanal with an ethyl branch at C-2.
- 105 marks
Question 10
An organic compound with the molecular formula forms 2,4-DNP derivative, reduces Tollens' reagent and undergoes Cannizzaro reaction. On vigorous oxidation, it gives 1,2-benzenedicarboxylic acid. Identify the compound.
Solve with AIWritten solution
Step 1 – degree of unsaturation.
Five units = a benzene ring (4) + one C=O (1).
Step 2 – the tests.
- Forms a 2,4-DNP derivative → contains a C=O group (aldehyde or ketone).
- Reduces Tollens' reagent → it is an aldehyde.
- Undergoes the Cannizzaro reaction → the aldehyde has no α-hydrogen, so the –CHO is attached directly to the benzene ring.
Step 3 – the oxidation product. Vigorous oxidation gives benzene-1,2-dicarboxylic acid (phthalic acid). Every side chain on a benzene ring is oxidised to –COOH, so the ring must carry two side chains ortho to each other. One is the –CHO; the other contains the remaining carbons:
So the second side chain is an ethyl group at the ortho position.
The compound is 2-ethylbenzaldehyde, (ortho).
Reactions:

The benzylic of the ethyl group is not an α-hydrogen of the aldehyde (it is on a different carbon of the ring), which is why the compound still gives the Cannizzaro reaction.
- 115 marks
Question 11
An organic compound (A) (molecular formula ) was hydrolysed with dilute sulphuric acid to give a carboxylic acid (B) and an alcohol (C). Oxidation of (C) with chromic acid produced (B). (C) on dehydration gives but-1-ene. Write equations for the reactions involved.
Solve with AIWritten solution
Identifying A, B and C:
- A is hydrolysed by dilute acid to an acid and an alcohol → A is an ester, RCOOR'.
- Oxidation of C gives B → the alcohol and the acid have the same carbon skeleton, so the 8 carbons split 4 + 4.
- C gives but-1-ene on dehydration, and C is oxidised to an acid (not a ketone) → C is a primary straight-chain alcohol, butan-1-ol. (Butan-2-ol would be oxidised to butanone, not to an acid.)
- B is therefore butanoic acid, and A is butyl butanoate, . Check: .
Equations:
Hydrolysis of A:
Oxidation of C:
Dehydration of C:

A = butyl butanoate, B = butanoic acid, C = butan-1-ol.
- 123 marks
Question 12
Arrange the following compounds in increasing order of their property as indicated:
(i) Acetaldehyde, Acetone, Di-tert-butyl ketone, Methyl tert-butyl ketone (reactivity towards HCN)
(ii) , , , (acid strength)
(iii) Benzoic acid, 4-Nitrobenzoic acid, 3,4-Dinitrobenzoic acid, 4-Methoxybenzoic acid (acid strength)
Solve with AIWritten solution
(i) Reactivity towards HCN:
Di-tert-butyl ketone < Methyl tert-butyl ketone < Acetone < Acetaldehyde
HCN adds by nucleophilic attack of on the carbonyl carbon.
- Steric effect: bulky tert-butyl groups block the approach of ; two of them block it most.
- Electronic effect: alkyl groups (+I) reduce the positive charge on the carbonyl carbon. Acetaldehyde has only one alkyl group and an H, so it is the most reactive.
(ii) Acid strength:
- Electron-withdrawing Br (–I) stabilises the carboxylate ion and increases acidity; the effect falls off with distance, so Br on the α-carbon (2-bromobutanoic acid) is stronger than Br on the β-carbon (3-bromobutanoic acid).
- Alkyl groups (+I) destabilise the carboxylate ion. In the α-carbon carries two alkyl groups, a larger +I effect than the single chain in butanoic acid, so it is the weakest acid.
(iii) Acid strength:
4-Methoxybenzoic acid < Benzoic acid < 4-Nitrobenzoic acid < 3,4-Dinitrobenzoic acid
Acid pK (NCERT) 4-Methoxybenzoic acid 4.46 Benzoic acid 4.19 4-Nitrobenzoic acid 3.41 - –OCH at the para position donates electrons by resonance (+R), destabilising the benzoate ion → weaker acid (higher pK).
- –NO withdraws electrons (–R, –I), stabilising the benzoate ion → stronger acid.
- A second –NO (3,4-dinitro) withdraws still more electron density → strongest of the four.

- 137 marks
Question 13
Give simple chemical tests to distinguish between the following pairs of compounds.
(i) Propanal and Propanone (ii) Acetophenone and Benzophenone
(iii) Phenol and Benzoic acid (iv) Benzoic acid and Ethyl benzoate
(v) Pentan-2-one and Pentan-3-one (vi) Benzaldehyde and Acetophenone
(vii) Ethanal and Propanal
Solve with AIWritten solution
Test Positive Negative (i) Tollens' reagent, warm propanal: silver mirror propanone: no change (ii) Iodoform ( + NaOH) acetophenone: yellow ppt of benzophenone: no ppt (iii) solution benzoic acid: brisk effervescence of phenol: no effervescence (iv) solution benzoic acid: brisk effervescence ethyl benzoate: no effervescence (v) Iodoform pentan-2-one: yellow ppt pentan-3-one: no ppt (vi) Tollens' reagent benzaldehyde: silver mirror acetophenone: no change (vii) Iodoform ethanal: yellow ppt propanal: no ppt Why each test works:
(i) Propanal is an aldehyde and is oxidised by Tollens' reagent; propanone is a ketone and is not (Fehling's solution also works: red-brown with propanal only). Propanone also gives the iodoform test, which propanal does not.
(ii) Acetophenone is a methyl ketone ( group); benzophenone is not.
(iii) Benzoic acid (pK 4.19) is stronger than carbonic acid and liberates ; phenol (pK ≈ 10) is too weak. Alternatively, neutral gives a violet colour with phenol and a buff precipitate with benzoic acid.
(iv) Only the free acid has an acidic –COOH hydrogen; the ester has none, so it does not react with .
(v) Pentan-2-one () is a methyl ketone; in pentan-3-one () the C=O carries two ethyl groups.
(vi) Benzaldehyde, an aldehyde, gives a silver mirror with Tollens' reagent (it does not respond to Fehling's test, since aromatic aldehydes do not). Acetophenone, a methyl ketone, gives the iodoform test instead.
(vii) Ethanal is the only aldehyde with a group, so it alone gives iodoform.

- 1410 marks
Question 14
How will you prepare the following compounds from benzene? You may use any inorganic reagent and any organic reagent having not more than one carbon atom.
(i) Methyl benzoate (ii) m-Nitrobenzoic acid
(iii) p-Nitrobenzoic acid (iv) Phenylacetic acid
(v) p-Nitrobenzaldehyde
Solve with AIWritten solution
Key first step (all parts): benzene is converted to toluene by Friedel–Crafts alkylation with chloromethane, a one-carbon reagent.
(i) Methyl benzoate: oxidise the side chain, then esterify with methanol.
(ii) m-Nitrobenzoic acid: oxidise first, then nitrate. The –COOH group is meta-directing, so nitration puts at C-3.
(iii) p-Nitrobenzoic acid: nitrate first (–CH is ortho/para-directing), separate p-nitrotoluene from the ortho isomer, then oxidise.
(iv) Phenylacetic acid: chlorinate the side chain, replace Cl by CN (adds one carbon), hydrolyse the nitrile.
(v) p-Nitrobenzaldehyde: nitrate toluene to p-nitrotoluene as in (iii), then use the Etard reaction (chromyl chloride in ), which stops at the aldehyde.

Every organic reagent used (, , KCN, ) has only one carbon atom.
- 159 marks
Question 15
How will you bring about the following conversions in not more than two steps?
(i) Propanone to Propene (ii) Benzoic acid to Benzaldehyde
(iii) Ethanol to 3-Hydroxybutanal (iv) Benzene to m-Nitroacetophenone
(v) Benzaldehyde to Benzophenone (vi) Bromobenzene to 1-Phenylethanol
(vii) Benzaldehyde to 3-Phenylpropan-1-ol (viii) Benzaldehyde to α-Hydroxyphenylacetic acid
(ix) Benzoic acid to m-Nitrobenzyl alcohol
Solve with AIWritten solution
(i) Propanone → propene: reduce to propan-2-ol, then dehydrate it; a secondary alcohol needs only the milder NCERT conditions (85% phosphoric acid, 440 K).
(ii) Benzoic acid → benzaldehyde: make the acid chloride, then Rosenmund reduction.
(iii) Ethanol → 3-hydroxybutanal: oxidise to ethanal with PCC (stops at the aldehyde), then aldol reaction.
(iv) Benzene → m-nitroacetophenone: Friedel–Crafts acylation, then nitration; the acetyl group is meta-directing.
(v) Benzaldehyde → benzophenone: add phenylmagnesium bromide to get a secondary alcohol, then oxidise it.
(vi) Bromobenzene → 1-phenylethanol: make the Grignard reagent, then add ethanal.
(vii) Benzaldehyde → 3-phenylpropan-1-ol: cross aldol condensation with ethanal (benzaldehyde has no α-H, so it acts only as the electrophile), then hydrogenate both the C=C and the C=O.
(viii) Benzaldehyde → α-hydroxyphenylacetic acid: form the cyanohydrin, then hydrolyse –CN to –COOH.
(ix) Benzoic acid → m-nitrobenzyl alcohol: nitrate first, while the meta-directing –COOH is present; then reduce –COOH with diborane, which does not reduce the nitro group.
Reducing first would give benzyl alcohol, whose –CHOH group directs nitration to the ortho and para positions, not meta.


- 164 marks
Question 16
Describe the following:
(i) Acetylation (ii) Cannizzaro reaction
(iii) Cross aldol condensation (iv) Decarboxylation
Solve with AIWritten solution
(i) Acetylation – replacing an active hydrogen of an –OH or –NH group by an acetyl group (), using ethanoyl chloride or ethanoic anhydride in the presence of a base such as pyridine (which removes the HCl or acid formed).
(ii) Cannizzaro reaction – aldehydes with no α-hydrogen undergo self oxidation–reduction (disproportionation) on heating with concentrated alkali: one molecule is reduced to the alcohol, the other oxidised to the salt of the carboxylic acid.
Methanal behaves the same way: .

(iii) Cross aldol condensation – aldol condensation between two different aldehydes and/or ketones. If both contain α-hydrogens, each can act as nucleophile and as electrophile, so a mixture of four products forms. Ethanal + propanal (dil. NaOH, heat) gives:
- two self products: but-2-enal (ethanal + ethanal) and 2-methylpent-2-enal (propanal + propanal);
- two cross products: 2-methylbut-2-enal (propanal enolate + ethanal) and pent-2-enal (ethanal enolate + propanal).

A ketone can also be one partner; for example benzaldehyde (no α-H) and acetophenone give mainly 1,3-diphenylprop-2-en-1-one.
(iv) Decarboxylation – loss of from a carboxylic acid. The sodium salt heated with soda-lime (NaOH and CaO, 3 : 1) gives a hydrocarbon with one carbon less.
Electrolysis of aqueous solutions of the salts (Kolbe electrolysis) also removes and joins two alkyl groups:
- 1711 marks
Question 17
Complete each synthesis by giving missing starting material, reagent or products.

Solve with AIWritten solution
Missing item Reason (i) (potassium benzoate) alkaline oxidises the whole side chain to –COO (ii) benzene-1,2-dicarbonyl dichloride (phthaloyl chloride) turns each –COOH into –COCl (iii) semicarbazone formation (iv) , anhyd. Friedel–Crafts acylation (v) 4-oxocyclohexane-1-carboxylate ion (+ Ag mirror) Tollens' reagent oxidises only the CHO group, not the ketone (vi) 2-[cyano(hydroxy)methyl]benzoic acid HCN adds to the aldehyde C=O (cyanohydrin) (vii) , 2-methyl-3-phenylprop-2-enal cross aldol: propanal enolate attacks benzaldehyde, then dehydration (viii) , ethyl 3-hydroxybutanoate reduces the ketone but not the ester (ix) cyclohexanone a secondary alcohol is oxidised to a ketone (x) 1. ; 2. /OH; 3. PCC hydroboration–oxidation gives the anti-Markovnikov primary alcohol, PCC stops at the aldehyde (xi) cyclohexylidenecyclohexane ozonolysis splits the C=C into two identical C=O halves 

Equations for the key steps:
In (vii) benzaldehyde has no α-hydrogen, so it can only be the electrophile; propanal supplies the nucleophile, and its α-carbon (which carries the ) becomes C-2 of the product.
- 183 marks
Question 18
Give plausible explanation for each of the following:
(i) Cyclohexanone forms cyanohydrin in good yield but 2,2,6-trimethylcyclohexanone does not.
(ii) There are two –NH groups in semicarbazide. However, only one is involved in the formation of semicarbazones.
(iii) During the preparation of esters from a carboxylic acid and an alcohol in the presence of an acid catalyst, the water or the ester should be removed as soon as it is formed.
Solve with AIWritten solution
(i) Cyanohydrin formation is a reversible nucleophilic addition: attacks the carbonyl carbon and the carbon changes from trigonal (, 120°) to tetrahedral (, 109.5°).
- In cyclohexanone the carbonyl carbon is flanked only by ring groups, so can approach it easily and the tetrahedral cyanohydrin is not crowded: the equilibrium lies well on the product side.
- In 2,2,6-trimethylcyclohexanone three methyl groups sit on the two carbons next to C=O. They hinder the approach of and, in the product, the new –CN and –OH groups would be squeezed against the methyl groups. The equilibrium therefore lies towards the ketone, and the yield is poor.

(ii) Semicarbazide is . The –NH attached directly to C=O, and the –NH– next to it, have their lone pairs delocalised onto the carbonyl oxygen by resonance (amide-type resonance, forms II and III). These nitrogens are therefore poor nucleophiles. The terminal –NH (on the –NH– that is not bonded to C=O) is not part of this resonance; its lone pair is free, so it alone attacks the carbonyl carbon of the aldehyde or ketone.


(iii) Acid-catalysed esterification is reversible:
The same acid also catalyses the reverse reaction, hydrolysis of the ester. By Le Chatelier's principle, removing a product (water or the ester) as soon as it forms shifts the equilibrium to the right, so the reaction continues until almost all the acid is converted and the yield of ester is high.
- 195 marks
Question 19
An organic compound contains 69.77% carbon, 11.63% hydrogen and rest oxygen. The molecular mass of the compound is 86. It does not reduce Tollens' reagent but forms an addition compound with sodium hydrogensulphite and give positive iodoform test. On vigorous oxidation it gives ethanoic and propanoic acid. Write the possible structure of the compound.
Solve with AIWritten solution
Step 1 – empirical formula. % O = 100 − (69.77 + 11.63) = 18.60 %.
Element % ÷ atomic mass ÷ smallest C 69.77 69.77 / 12 = 5.814 5.00 H 11.63 11.63 / 1 = 11.63 10.0 O 18.60 18.60 / 16 = 1.163 1.00 Empirical formula = ; empirical formula mass = 5(12) + 10(1) + 16 = 86.
Step 2 – molecular formula. Molecular mass 86 = empirical formula mass, so the molecular formula is (one degree of unsaturation: one C=O).
Step 3 – the tests.
- Adds → a carbonyl compound; does not reduce Tollens' reagent → a ketone.
- Positive iodoform test → a methyl ketone, with R = .
Two methyl ketones are possible: pentan-2-one () and 3-methylbutan-2-one ().
Step 4 – the oxidation products decide. Vigorous oxidation cleaves the C–C bond next to C=O. Pentan-2-one gives ethanoic acid + propanoic acid, exactly as observed; 3-methylbutan-2-one has a branched group, so its cleavage gives ethanoic acid with propanone, or 2-methylpropanoic acid, but never propanoic acid.

The compound is pentan-2-one, .
Reactions:

- 204 marks
Question 20
Although phenoxide ion has more number of resonating structures than carboxylate ion, carboxylic acid is a stronger acid than phenol. Why?
Solve with AIWritten solution
The strength of an acid depends on how stable its conjugate base is; the counting of resonance structures matters less than what kind of structures they are.
Carboxylate ion. has only two resonance structures, but they are equivalent (identical in energy), and in both the negative charge sits on a highly electronegative oxygen atom. The charge is shared equally by two oxygens, so resonance stabilisation is large.

Phenoxide ion. has five resonance structures, but they are not equivalent. In three of them (II, III, IV) the negative charge is on a ring carbon, which is much less electronegative than oxygen; these structures contribute little. The charge is therefore delocalised over only one oxygen and less electronegative carbons.

Result: the carboxylate ion is stabilised far more than the phenoxide ion, so a carboxylic acid loses its proton more readily. This is seen in the pK values: about 4.2–4.8 for simple carboxylic acids (benzoic acid 4.19) against about 10 for phenol.
- 213 marks
Question 21
Write the structures of the following compounds.
(i) α-Methoxypropionaldehyde (ii) 3-Hydroxybutanal
(iii) 2-Hydroxycyclopentane carbaldehyde (iv) 4-Oxopentanal
(v) Di-sec-butyl ketone (vi) 4-Fluoroacetophenone
Solve with AIWritten solution
Name Structure (i) α-Methoxypropionaldehyde (2-methoxypropanal) (ii) 3-Hydroxybutanal (iii) 2-Hydroxycyclopentane carbaldehyde cyclopentane ring with –CHO on C-1 and –OH on the next ring carbon, C-2 (iv) 4-Oxopentanal (v) Di-sec-butyl ketone (3,5-dimethylheptan-4-one) (vi) 4-Fluoroacetophenone (F para to the acetyl group) 
Points to notice:
- (i) In common names the Greek letter α marks the carbon next to the CHO carbon, so the methoxy group is on C-2 of the three-carbon chain.
- (iv) When a molecule has both –CHO and a ketone C=O, the aldehyde is the principal group (suffix -al) and the ketone oxygen is named by the prefix oxo-.
- (v) A sec-butyl group is ; two of them on a C=O give a seven-carbon chain with methyls on C-3 and C-5.
- 222 marks
Question 22
Write the structures of products of the following reactions:
Solve with AIWritten solution
(i) Friedel–Crafts acylation: the propanoyl group replaces a ring hydrogen.
Product: propiophenone (1-phenylpropan-1-one).
(ii) Acyl chloride + dialkylcadmium gives a ketone; each benzyl group of the cadmium compound joins one acetyl group.
Product: 1-phenylpropan-2-one (benzyl methyl ketone).
(iii) Hydration of an alkyne (, dil. ): water adds by Markovnikov's rule to give an enol, which tautomerises to the ketone.
Product: propanone.
(iv) Etard reaction: chromyl chloride oxidises the methyl group of 4-nitrotoluene to a chromium complex, which is hydrolysed to the aldehyde; the nitro group is unaffected.
Product: 4-nitrobenzaldehyde.

- 232 marks
Question 23
Arrange the following compounds in increasing order of their boiling points.
, , ,
Solve with AIWritten solution
All four have similar molecular masses (44–46), so the order is decided by the intermolecular forces:
- Propane is non-polar: only weak van der Waals (dispersion) forces → lowest b.p.
- Methoxymethane is weakly polar (bent C–O–C): weak dipole–dipole attraction.
- Ethanal has the strongly polar C=O group: stronger dipole–dipole attraction, but no O–H, so no hydrogen bonding between its molecules.
- Ethanol has an O–H group: molecules are associated by intermolecular hydrogen bonding → highest b.p.

The measured boiling points (231 K, 248 K, 293 K and 351 K) follow the same order.
- 243 marks
Question 24
Arrange the following compounds in increasing order of their reactivity in nucleophilic addition reactions.
(i) Ethanal, Propanal, Propanone, Butanone.
(ii) Benzaldehyde, p-Tolualdehyde, p-Nitrobenzaldehyde, Acetophenone.
Hint: Consider steric effect and electronic effect.
Solve with AIWritten solution
A nucleophile attacks the carbonyl carbon. The reaction is faster when that carbon is more positive (electronic effect) and less crowded (steric effect).
(i) Butanone < Propanone < Propanal < Ethanal
- Aldehydes (one alkyl group + H) are more reactive than ketones (two alkyl groups): less steric hindrance and less electron release (+I) into C=O.
- Among the aldehydes, ethyl in propanal is bulkier and releases more electrons than methyl in ethanal, so ethanal is the most reactive.
- Among the ketones, the ethyl group of butanone makes it more hindered and less electrophilic than propanone, so butanone is the least reactive.
(ii) Acetophenone < p-Tolualdehyde < Benzaldehyde < p-Nitrobenzaldehyde
- Acetophenone is a ketone (two groups on the C=O carbon) → least reactive.
- In the aldehydes the ring substituent at the para position changes the positive charge on the carbonyl carbon: –CH (+I, hyperconjugation) donates electrons and lowers reactivity, while –NO (–I, –R) withdraws electrons and raises it.

- 252 marks
Question 25
Predict the products of the following reactions:
Solve with AIWritten solution
Each reagent is an ammonia derivative . It adds to the C=O group and the adduct loses water, so the product contains in place of .
(i) Cyclopentanone + hydroxylamine → cyclopentanone oxime, .
(ii) Cyclohexanone + 2,4-dinitrophenylhydrazine → cyclohexanone 2,4-dinitrophenylhydrazone, .
(iii) R–CH=CH–CHO + semicarbazide → semicarbazone, R–CH=CH–CH=N–NH–CO–NH. Only the CHO group reacts; the C=C is untouched.
(iv) Acetophenone + ethylamine → Schiff's base (substituted imine), .

- 262 marks
Question 26
Give the IUPAC names of the following compounds:
(i) (ii)
(iii) and (iv) as drawn below
Solve with AIWritten solution
IUPAC name Reason (i) 3-Phenylpropanoic acid COOH carbon = C-1 of a three-carbon chain; phenyl on C-3 (ii) 3-Methylbut-2-enoic acid four-carbon chain, C=C between C-2 and C-3, methyl on C-3 (iii) 2-Methylcyclopentanecarboxylic acid –COOH on a ring: suffix -carboxylic acid; the ring carbon bearing COOH is C-1, so the methyl is on C-2 (iv) 2,4,6-Trinitrobenzoic acid benzoic acid parent; the three NO groups are at both ortho positions and the para position 
- 273 marks
Question 27
Show how each of the following compounds can be converted to benzoic acid.
(i) Ethylbenzene (ii) Acetophenone (iii) Bromobenzene (iv) Phenylethene (Styrene)
Solve with AIWritten solution
(i), (ii) and (iv) – side-chain oxidation. Hot alkaline oxidises any carbon side chain attached to a benzene ring (whatever its length) to –COO; acidification then gives benzoic acid.
In (i), (ii) and (iv) every side-chain carbon beyond the one attached to the ring is lost; in (iv) the terminal is oxidised to , which stays in the alkaline solution as .
(iii) – Grignard route. Bromobenzene is converted to phenylmagnesium bromide, which adds to carbon dioxide (dry ice); hydrolysis of the salt gives the acid.

- 282 marks
Question 28
Which acid of each pair shown here would you expect to be stronger?
(i) or (ii) or
(iii) or
(iv) the pair drawn below
Solve with AIWritten solution
An electron-withdrawing group stabilises the carboxylate ion by spreading its negative charge, so it increases acidity; an electron-donating group does the opposite. The inductive effect weakens with distance from –COOH.
(i) – fluorine (–I) withdraws electrons and stabilises ; the group of ethanoic acid is electron-releasing (+I).
(ii) – F is more electronegative than Cl, so its –I effect is stronger (NCERT: ).
(iii) – here F is on the β-carbon (C-3); in the other acid it is on the γ-carbon (C-4), farther from –COOH, so its effect is weaker.
(iv) (4-(trifluoromethyl)benzoic acid) – the –CF group is strongly electron-withdrawing (it heads NCERT's series ), while –CH is electron-donating (+I) and weakens 4-methylbenzoic acid.

What Class 12 Chemistry Ch 8 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Nomenclature Of Aldehydes And Ketones
- 02Preparation Of Aldehydes And Ketones
- 03Physical Properties Of Aldehydes And Ketones
- 04Structure Of Carbonyl Group
- 05Chemical Reactions Of Aldehydes And Ketones
- 06Tests To Distinguish Aldehyde And Ketones
- 07Carboxylic Acids
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 8 before.
- Competency-Based Questions (CBQ)The applied, case-study format that carries half the marks in a CBSE paper.80questionsOpen
- Previous Year QuestionsQuestions that have actually appeared in board papers, each tagged with its year.37questionsOpen
- Practice QuestionsExtra questions per chapter, for when one attempt at a method is not enough.30questionsOpen
Ch 8 in past CBSE papers
The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.
- 11 mark
Board paper question 1
Which of the following is most reactive in nucleophilic addition reactions?
Solve with AIAnswer
- Correct
(A)
(B)
(C)
(D)
Option (A) is correct.
Explanation: In a nucleophilic addition the nucleophile attacks the electron-deficient carbonyl carbon. Two factors decide how fast this happens:
- Electronic factor: alkyl or aryl groups release electrons towards the carbonyl carbon and lower its partial positive charge (), so it attracts the nucleophile less.
- Steric factor: larger groups crowd the carbonyl carbon and block the approach of the nucleophile.
In HCHO the carbonyl carbon carries two small hydrogen atoms and no electron-releasing group, so it is the most electrophilic and the least hindered.

Why the other options are wrong:
- (B) has one group (+I effect and some crowding), so it is less reactive than HCHO.
- (C) (ethane) has no carbonyl group at all and does not undergo nucleophilic addition.
- (D) Acetophenone is a ketone with a methyl and a phenyl group on the carbonyl carbon; the phenyl ring also reduces the charge by resonance. It is the least reactive of the carbonyl compounds given.
- 21 mark
Board paper question 2
Which of the following does not give aldol condensation reaction?
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation: Aldol condensation needs at least one α-hydrogen (a hydrogen on the carbon next to the C=O group). Dilute alkali removes this α-hydrogen, and the carbanion formed adds to the carbonyl group of a second molecule.
In benzaldehyde the –CHO group is attached directly to a ring carbon that carries no hydrogen, so there is no α-hydrogen and no aldol condensation. (With concentrated alkali benzaldehyde gives the Cannizzaro reaction instead.)

Why the other options are wrong:
- (A) Ethanal has three α-hydrogens; it gives 3-hydroxybutanal (aldol).
- (C) Phenylethanal has two α-hydrogens on the group between the ring and –CHO.
- (D) Propanone has six α-hydrogens; it gives 4-hydroxy-4-methylpentan-2-one (ketol).
- 31 mark
Board paper question 3
Which of the following does not give Cannizzaro reaction?
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation: The Cannizzaro reaction is given by aldehydes that have no α-hydrogen. With concentrated alkali, one molecule is oxidised to the carboxylate salt and another is reduced to the alcohol (self oxidation–reduction).
2-Methylpropanal, , has one α-hydrogen on the carbon next to –CHO. Alkali removes this hydrogen instead, so the compound undergoes aldol reaction and not the Cannizzaro reaction.

Why the other options are wrong:
- (A) 2,2-Dimethylpropanal: the α-carbon carries three groups and no hydrogen, so it gives the Cannizzaro reaction.
- (C) Benzaldehyde: –CHO is on a ring carbon with no hydrogen; it gives benzyl alcohol and sodium benzoate.
- (D) Methanal has no α-carbon at all; it gives methanol and sodium methanoate.
- 41 mark
Board paper question 4
Which of the following reactions can be used to obtain benzaldehyde from benzene?
Solve with AIAnswer
(A) Rosenmund's reduction
(B) Stephen's reaction
(C) Etard's reaction
- Correct
(D) Gattermann–Koch reaction
Option (D) is correct.
Explanation: In the Gattermann–Koch reaction benzene is treated with carbon monoxide and hydrogen chloride in the presence of anhydrous aluminium chloride or cuprous chloride. A –CHO group is introduced directly into the ring:

Why the other options are wrong: each also gives benzaldehyde, but not from benzene.
- (A) Rosenmund reduction starts from benzoyl chloride: .
- (B) Stephen reaction starts from benzonitrile (/HCl, then ).
- (C) Etard reaction starts from toluene (chromyl chloride, then hydrolysis).
- 51 mark
Board paper question 5
In which of the following solvents is soluble?
Solve with AIAnswer
(A) ether
(B) acetone
- Correct
(C) water
(D) bromine water
Option (C) is correct.
Explanation: is an ionic salt (an alkylammonium halide). An ionic solid dissolves only if the solvent can surround the separated ions strongly enough to make up for the lattice energy.
- Water is highly polar (high dielectric constant). Its oxygen end binds the group through ion–dipole attraction and N–H···O hydrogen bonds, and its hydrogen end solvates . So the salt dissolves readily in water.
Why the other options are wrong:
- (A) Ether is only weakly polar and cannot solvate ions, so the salt is insoluble in it.
- (B) Acetone is polar but aprotic; it solvates anions poorly and does not dissolve such salts well.
- (D) Bromine water is mostly water, so the salt would in fact dissolve in it too. It is not the intended answer because bromine water is used as a reagent (for bromination or oxidation) and is not a solvent. The answer expected by CBSE is plain water. (Note: this question belongs to the Amines chapter.)
- 61 mark
Board paper question 6
The reagent that can be used to distinguish acetophenone and benzophenone is:
Solve with AIAnswer
(A) 2,4-dinitrophenylhydrazine
(B) aqueous
(C) Fehling's solution
- Correct
(D) and NaOH
Option (D) is correct.
Explanation: The iodoform test is given by compounds that contain the group.
- Acetophenone, , is a methyl ketone. With and NaOH it gives a yellow precipitate of iodoform:
- Benzophenone, , has no group, so no yellow precipitate forms.

Why the other options are wrong:
- (A) Both are ketones, so both give an orange-red 2,4-DNP derivative.
- (B) Neither aryl ketone forms a bisulphite adduct readily (the addition equilibrium lies to the left for ketones with bulky groups), so there is no difference to observe.
- (C) Fehling's solution is reduced only by aliphatic aldehydes; neither ketone reacts.
All 37 board paper questions for this chapter, solved the same way.
Class 12 Chemistry Ch 8 questions students ask
How many questions are there in Class 12 Chemistry Ch 8?
28 questions. Every one is solved step by step on this page.
Are these Class 12 Chemistry solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 12 Chemistry Ch 8 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
