Opening your dashboard
Class 11 Chemistry Chapter 4: Chemical Bonding and Molecular Structure Solutions
40 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 4, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
40 questions with solutions
1–5 marks · Mixed difficulty
- 12 marks
Question 1
Explain the formation of a chemical bond.
Solve with AIWritten solution
A chemical bond is the attractive force that holds the constituents (atoms, ions) of a chemical species together.
Atoms combine because the bonded state has lower energy, and is therefore more stable, than the separate atoms. According to the Kössel–Lewis approach, atoms combine to attain the stable noble-gas configuration (an octet, or a duplet for hydrogen) in their valence shell. This can happen in two ways:
(a) Transfer of electrons: one or more electrons are completely transferred from one atom (usually a metal) to another (usually a non-metal). The oppositely charged ions formed are held together by electrostatic attraction. This is an ionic (electrovalent) bond, e.g. Na⁺Cl⁻.
(b) Sharing of electrons: two atoms share one or more pairs of electrons, each shared pair being counted in the valence shell of both atoms. This is a covalent bond, e.g. Cl–Cl in Cl₂.
In either case, the energy of the system decreases when the bond forms, which is why the bond is stable.
- 23 marks
Question 2
Write Lewis dot symbols for atoms of the following elements: Mg, Na, B, O, N, Br.
Solve with AIWritten solution
A Lewis dot symbol shows only the valence electrons of an atom as dots around its symbol. The number of dots equals the number of valence electrons, found from the electronic configuration (or the group number).
Element Electronic configuration Valence electrons Mg 2, 8, 2 2 Na 2, 8, 1 1 B 2, 3 3 O 2, 6 6 N 2, 5 5 Br 2, 8, 18, 7 7 
Na and Mg (1 and 2 dots) tend to lose their valence electrons to form cations, while B, N, O and Br (3, 5, 6 and 7 dots) tend to share or gain electrons to complete an octet.
- 33 marks
Question 3
Write Lewis symbols for the following atoms and ions:
S and S²⁻; Al and Al³⁺; H and H⁻
Solve with AIWritten solution
(a) S and S²⁻: sulphur (2, 8, 6) has 6 valence electrons, so S has six dots.

S²⁻ has gained 2 electrons, so it has 8 valence electrons (a complete octet).

(b) Al and Al³⁺: aluminium (2, 8, 3) has 3 valence electrons, so Al has three dots.

Al³⁺ has lost all 3 valence electrons, so no dots are shown around the symbol.

(c) H and H⁻: hydrogen has 1 valence electron, so H has one dot.

H⁻ has gained 1 electron, so it has 2 electrons (a complete duplet, like helium).

- 45 marks
Question 4
Draw the Lewis structures for the following molecules and ions:
H₂S, SiCl₄, BeF₂, CO₃²⁻, HCOOH
Solve with AIWritten solution
Method: count the total valence electrons, join the atoms by single bonds, complete the octets of the outer atoms with lone pairs, put any remaining electrons on the central atom, and form multiple bonds if the central atom still lacks an octet.
Species Total valence electrons Bonds and lone pairs H₂S 2(1) + 6 = 8 2 S–H bonds, 2 lone pairs on S SiCl₄ 4 + 4(7) = 32 4 Si–Cl bonds, 3 lone pairs on each Cl BeF₂ 2 + 2(7) = 16 2 Be–F bonds, 3 lone pairs on each F (Be has only 4 electrons: incomplete octet) CO₃²⁻ 4 + 3(6) + 2 = 24 one C=O and two C–O⁻ bonds; the two singly bonded O atoms carry the −1 charges HCOOH 1 + 4 + 2(6) + 1 = 18 H–C, C=O, C–O, O–H bonds; 2 lone pairs on each O 
In CO₃²⁻ the double bond can be drawn to any one of the three O atoms, so the ion is actually a resonance hybrid of three such structures (see Exercise 4.11).
- 55 marks
Question 5
Define octet rule. Write its significance and limitations.
Solve with AIWritten solution
Octet rule: atoms combine, by transfer or by sharing of valence electrons, so as to attain eight electrons (an octet) in their valence shell, i.e. the stable configuration of the nearest noble gas.
Significance:
- It explains why atoms combine and is the basis of the Kössel–Lewis theory of the ionic bond (electron transfer) and the covalent bond (electron sharing).
- It predicts the valency and the number of bonds formed, e.g. C forms 4 bonds in CH₄, N forms 3 in NH₃, O forms 2 in H₂O.
- It is very useful for writing Lewis structures of a large number of compounds, especially of second-period elements.
Limitations:
- Incomplete octet of the central atom: in some compounds the central atom has fewer than eight electrons, e.g. LiCl (Li has 2), BeH₂ (Be has 4) and BCl₃ (B has 6).
- Odd-electron molecules: molecules such as NO and NO₂ have an odd number of electrons, so every atom cannot have an octet.
- Expanded octet: elements of the third and later periods can have more than eight valence electrons around the central atom, e.g. PF₅ (10 electrons on P), SF₆ (12 on S) and H₂SO₄ (12 on S).
- Other drawbacks: noble gases, which already have octets, form compounds such as XeF₂, KrF₂ and XeOF₂; the rule says nothing about the shape of molecules; and it does not explain the relative stability of molecules (the energy of a molecule).
- 62 marks
Question 6
Write the favourable factors for the formation of ionic bond.
Solve with AIWritten solution
An ionic bond forms by transfer of electrons from a metal atom to a non-metal atom, followed by packing of the ions into a crystal lattice. Its formation is favoured by:
- Low ionization enthalpy of the metal atom, so that it loses its valence electron(s) easily to form the cation.
- High negative electron gain enthalpy of the non-metal atom, so that it gains electron(s) easily to form the anion.
- High lattice enthalpy of the compound formed, so that the energy released when the ions pack together outweighs the energy needed to form the ions (e.g. 788 kJ mol⁻¹ for NaCl).
- 75 marks
Question 7
Discuss the shape of the following molecules using the VSEPR model:
BeCl₂, BCl₃, SiCl₄, AsF₅, H₂S, PH₃
Solve with AIWritten solution
According to VSEPR theory, the electron pairs (bond pairs and lone pairs) around the central atom arrange themselves as far apart as possible, and the shape is described by the positions of the atoms.
Molecule Valence electrons on central atom Bond pairs Lone pairs Type Shape BeCl₂ Be: 2 2 0 AB₂ linear (180°) BCl₃ B: 3 3 0 AB₃ trigonal planar (120°) SiCl₄ Si: 4 4 0 AB₄ tetrahedral (109.5°) AsF₅ As: 5 5 0 AB₅ trigonal bipyramidal (120° and 90°) H₂S S: 6 2 2 AB₂E₂ bent (V-shaped) PH₃ P: 5 3 1 AB₃E trigonal pyramidal (a) BeCl₂: two bond pairs and no lone pair on Be; they lie on opposite sides, so the molecule is linear.

(b) BCl₃: three bond pairs and no lone pair on B; they point to the corners of an equilateral triangle, so the molecule is trigonal planar.

(c) SiCl₄: four bond pairs and no lone pair on Si; they point to the corners of a regular tetrahedron.

(d) AsF₅: five bond pairs and no lone pair on As; the shape is trigonal bipyramidal, with three equatorial and two axial As–F bonds.

(e) H₂S: S has 6 valence electrons; 2 are used in two S–H bonds, leaving 2 lone pairs. The four electron pairs are arranged tetrahedrally, but with two positions occupied by lone pairs the molecule is bent (V-shaped).

(f) PH₃: P has 5 valence electrons; 3 are used in three P–H bonds, leaving 1 lone pair. The four electron pairs are arranged tetrahedrally, and with one position occupied by the lone pair the molecule is trigonal pyramidal.

- 82 marks
Question 8
Although geometries of NH₃ and H₂O molecules are distorted tetrahedral, bond angle in water is less than that of ammonia. Discuss.
Solve with AIWritten solution
In both molecules the central atom is surrounded by four electron pairs, which are arranged tetrahedrally (ideal angle 109.5°).
- In NH₃, N has 3 bond pairs and 1 lone pair.
- In H₂O, O has 2 bond pairs and 2 lone pairs.
The order of repulsion is lone pair–lone pair > lone pair–bond pair > bond pair–bond pair. In NH₃ the single lone pair repels the three N–H bond pairs and squeezes the H–N–H angle from 109.5° to 107°. In H₂O there are two lone pairs, so there is an additional, stronger lone pair–lone pair repulsion; the two O–H bond pairs are pushed still closer, and the H–O–H angle falls to 104.5°.
Hence the bond angle in water is less than that in ammonia.
- 92 marks
Question 9
How do you express the bond strength in terms of bond order?
Solve with AIWritten solution
Bond strength is measured by the bond enthalpy (the energy needed to break one mole of bonds). The greater the bond order (the number of bonds between the two atoms), the stronger the bond: bond enthalpy increases and bond length decreases as bond order increases.
For example, for O₂ (O=O, bond order 2) the bond dissociation enthalpy is 498 kJ mol⁻¹, while for N₂ (N≡N, bond order 3) it is 946.0 kJ mol⁻¹. The N₂ bond is stronger and shorter.
- 101 mark
Question 10
Define the bond length.
Solve with AIWritten solution
Bond length is the equilibrium distance between the nuclei of two bonded atoms in a molecule. It is measured by spectroscopic, X-ray diffraction and electron diffraction techniques, and is usually expressed in picometres, e.g. the H–H bond length in H₂ is 74 pm.
- 113 marks
Question 11
Explain the important aspects of resonance with reference to the CO₃²⁻ ion.
Solve with AIWritten solution
A single Lewis structure of CO₃²⁻ shows one C=O double bond and two C–O single bonds, so it predicts unequal bond lengths. Experimentally, all three carbon–oxygen bonds in CO₃²⁻ are identical, with a length between that of a C–O single bond and a C=O double bond. This is explained by resonance: the ion is represented by three canonical (resonance) structures.

Important aspects of resonance, illustrated by CO₃²⁻:
- The actual structure is the resonance hybrid of structures I, II and III; no single canonical form represents the ion correctly.
- The canonical forms differ only in the positions of electrons; the positions of the atoms are the same in all of them.
- The canonical forms have no real existence; the ion does not switch between them.
- The resonance hybrid is more stable (lower in energy) than any single canonical structure.
- Resonance averages the bond characteristics: each C–O bond has a bond order of , and the −2 charge is spread equally over the three O atoms.
- 122 marks
Question 12
H₃PO₃ can be represented by structures 1 and 2 shown below. Can these two structures be taken as the canonical forms of the resonance hybrid representing H₃PO₃? If not, give reasons for the same.
Solve with AIWritten solution
No. Canonical forms of a resonance hybrid must have the same positions of all atoms; they may differ only in the distribution of electrons.
In structure 1 one H atom is bonded directly to P, while in structure 2 that H atom is bonded to an O atom instead. The position of an atom has changed, so the two are different compounds (isomers), not canonical forms of the same molecule.
- 133 marks
Question 13
Write the resonance structures for SO₃, NO₂ and NO₃⁻.
Solve with AIWritten solution
In each species the multiple bond (and the negative charge) can be placed on more than one equivalent O atom, so the real structure is a resonance hybrid of the canonical forms below. Formal charges are shown.

(i) SO₃: three canonical forms, each with one S=O bond and two S–O⁻ bonds (formal charge +2 on S, −1 on each singly bonded O). All three S–O bonds in SO₃ are identical.
(ii) NO₂: an odd-electron molecule (17 valence electrons). Two canonical forms, each with one N=O bond and one N–O⁻ bond; N carries the unpaired electron and a formal charge of +1.
(iii) NO₃⁻: three canonical forms, each with one N=O bond and two N–O⁻ bonds (formal charge +1 on N); the overall charge of the ion is −1, and all three N–O bonds are identical.
- 143 marks
Question 14
Use Lewis symbols to show electron transfer between the following atoms to form cations and anions:
(a) K and S
(b) Ca and O
(c) Al and N
Solve with AIWritten solution
In each case the metal atom loses its valence electrons and the non-metal atom gains them, so that both attain noble-gas configurations. The ions are held together by electrostatic attraction.
(a) K and S: each K atom (2, 8, 8, 1) gives 1 electron, and S (2, 8, 6) needs 2, so two K atoms are needed: K₂S.

(b) Ca and O: Ca (2, 8, 8, 2) gives 2 electrons to O (2, 6): CaO.

(c) Al and N: Al (2, 8, 3) gives 3 electrons to N (2, 5): AlN.

- 152 marks
Question 15
Although both CO₂ and H₂O are triatomic molecules, the shape of H₂O molecule is bent while that of CO₂ is linear. Explain this on the basis of dipole moment.
Solve with AIWritten solution
CO₂: each C=O bond is polar, because O is more electronegative than C. Yet the observed dipole moment of CO₂ is zero. This is possible only if the two equal bond dipoles point in exactly opposite directions and cancel, i.e. the molecule is linear (O=C=O, 180°).

H₂O: each O–H bond is polar, and the observed dipole moment of H₂O is 1.85 D, not zero. So the two O–H bond dipoles do not cancel, which means they are not opposite to each other: the molecule is bent, and the resultant dipole lies along the bisector of the H–O–H angle.

Thus the zero dipole moment of CO₂ shows that it is linear, and the non-zero dipole moment of H₂O shows that it is bent.
- 163 marks
Question 16
Write the significance/applications of dipole moment.
Solve with AIWritten solution
Dipole moment ( = charge × distance of separation, usually expressed in debye, 1 D = 3.33564 × 10⁻³⁰ C m) is useful in the following ways:
- Polar or non-polar molecules: a molecule with is non-polar and one with is polar. E.g. H₂ and CO₂ are non-polar, while HF (1.78 D) and H₂O (1.85 D) are polar.
- Shape of molecules: molecules whose polar bonds are arranged symmetrically have zero dipole moment. CO₂ ( = 0) is linear while H₂O (1.85 D) is bent; BF₃ ( = 0) is trigonal planar and CH₄, CCl₄ ( = 0) are regular tetrahedral, while CHCl₃ (1.04 D) is polar.
- Effect of lone pairs: dipole moments show how lone pairs contribute, e.g. NH₃ (1.47 D) has a much higher dipole moment than NF₃ (0.23 D) although both are pyramidal.
- Polarity of bonds: the dipole moment of a diatomic molecule measures the polarity of its bond, e.g. HF (1.78 D) > HCl (1.07 D) > HBr (0.79 D) > HI (0.38 D), following the fall in electronegativity difference.
- 173 marks
Question 17
Define electronegativity. How does it differ from electron gain enthalpy?
Solve with AIWritten solution
Electronegativity is the ability of an atom in a chemical compound to attract the shared pair of electrons towards itself.
Electronegativity Electron gain enthalpy It is a property of an atom in a bonded state (in a molecule). It is a property of an isolated gaseous atom. It refers to attraction for a shared pair of electrons. It is the enthalpy change when an electron is added to the atom to form an anion. It is a qualitative, relative quantity with no units; values are given on scales such as the Pauling scale (F = 4.0). It is an experimentally measurable energy, expressed in kJ mol⁻¹. It is not constant for an element; it depends on factors such as the atom's hybridisation and oxidation state. It has a definite value for a given atom. - 183 marks
Question 18
Explain with the help of suitable example polar covalent bond.
Solve with AIWritten solution
When a covalent bond is formed between two different atoms, the shared electron pair is not shared equally: it is displaced towards the more electronegative atom. That atom acquires a partial negative charge () and the other a partial positive charge (). Such a bond is called a polar covalent bond, and it has a dipole moment.
Example: HCl. Cl (electronegativity 3.0) is more electronegative than H (2.1), so the bonding pair lies closer to Cl:
The H–Cl bond is polar, and the HCl molecule has a dipole moment of 1.07 D. In contrast, in H₂ or Cl₂ both atoms are identical, the pair is shared equally, and the bond is non-polar.
- 192 marks
Question 19
Arrange the bonds in order of increasing ionic character in the molecules: LiF, K₂O, N₂, SO₂ and ClF₃.
Solve with AIWritten solution
Ionic character of a bond increases with the electronegativity difference between the bonded atoms. Using Pauling electronegativities (Li 1.0, K 0.8, N 3.0, S 2.5, Cl 3.0, O 3.5, F 4.0):
Bond Electronegativity difference N–N (N₂) 0 S–O (SO₂) 1.0 Cl–F (ClF₃) 1.0 K–O (K₂O) 2.7 Li–F (LiF) 3.0 Order of increasing ionic character:
N₂ is purely covalent. SO₂ and ClF₃ have polar covalent bonds of nearly equal polarity (a difference of 1.0 for both on this scale), and the accepted order places SO₂ just below ClF₃. K₂O and LiF are ionic, LiF the most.
- 202 marks
Question 20
The skeletal structure of CH₃COOH as shown below is correct, but some of the bonds are shown incorrectly. Write the correct Lewis structure for acetic acid.
Solve with AIWritten solution
In the given structure, one H is joined to the methyl carbon by a double bond (H can form only one bond), and the C–O bond to the carbonyl oxygen is drawn as a single bond, which leaves the carbonyl carbon with fewer than four bonds.
The correct Lewis structure has single C–H bonds, a C=O double bond to the carbonyl oxygen (2 lone pairs) and a single C–O bond to the –OH oxygen (2 lone pairs):

Each C atom now has four bonds (an octet), each O atom has an octet, and each H has a duplet.
- 213 marks
Question 21
Apart from tetrahedral geometry, another possible geometry for CH₄ is square planar with the four H atoms at the corners of the square and the C atom at its centre. Explain why CH₄ is not square planar?
Solve with AIWritten solution
VSEPR argument: the C atom in CH₄ has four bond pairs and no lone pair. Electron pairs arrange themselves as far apart as possible to minimise repulsion. In a square planar arrangement the H–C–H angles would be 90°, whereas in a tetrahedral arrangement they are 109.5°. The bond pairs are farther apart in the tetrahedral arrangement, so repulsion is smaller and the molecule is more stable. Hence CH₄ is tetrahedral.
Hybridisation argument: in forming CH₄, carbon (excited state 2s¹ 2p_x¹ 2p_y¹ 2p_z¹) undergoes sp³ hybridisation. The four sp³ hybrid orbitals are directed towards the corners of a regular tetrahedron, so the four C–H bonds point tetrahedrally. A square planar shape would need a different type of hybridisation involving a d orbital, which carbon does not have in its valence shell.
- 222 marks
Question 22
Explain why BeH₂ molecule has a zero dipole moment although the Be–H bonds are polar.
Solve with AIWritten solution
Be is sp hybridised in BeH₂, so the molecule is linear (H–Be–H, 180°).
Each Be–H bond is polar (H is more electronegative than Be), so each bond has a bond dipole of the same magnitude. In the linear molecule the two bond dipoles point in exactly opposite directions, so they cancel each other:
Hence BeH₂ has zero dipole moment even though its bonds are polar.
- 232 marks
Question 23
Which out of NH₃ and NF₃ has higher dipole moment and why?
Solve with AIWritten solution
NH₃ has the higher dipole moment (1.47 D, i.e. 4.90 × 10⁻³⁰ C m) than NF₃ (0.23 D, i.e. about 0.77 × 10⁻³⁰ C m), although F is more electronegative than H.
Both molecules are trigonal pyramidal, with one lone pair on N. The lone pair has an orbital dipole directed away from N, towards the lone pair.
- In NH₃, N is more electronegative than H, so the three N–H bond dipoles point towards N. Their resultant is in the same direction as the lone-pair orbital dipole, and the two add up.
- In NF₃, F is more electronegative than N, so the three N–F bond dipoles point away from N, towards F. Their resultant is opposite to the lone-pair orbital dipole, and the two partly cancel.

Hence the net dipole moment of NH₃ is much greater than that of NF₃.
- 243 marks
Question 24
What is meant by hybridisation of atomic orbitals? Describe the shapes of sp, sp², sp³ hybrid orbitals.
Solve with AIWritten solution
Hybridisation is the process of intermixing of atomic orbitals of slightly different energies (of the same atom) to give an equal number of new orbitals, called hybrid orbitals, which are equivalent in energy and shape. Hybrid orbitals form stronger bonds than pure atomic orbitals and are directed so that the electron pairs are as far apart as possible.
Hybridisation Orbitals mixed Number of hybrid orbitals Arrangement (angle) Example sp one s + one p 2 linear (180°) BeCl₂, C₂H₂ sp² one s + two p 3 trigonal planar (120°) BCl₃, C₂H₄ sp³ one s + three p 4 tetrahedral (109.5°) CH₄, NH₃, H₂O sp: the two sp hybrid orbitals lie along a straight line, pointing in opposite directions, with 50% s and 50% p character.
sp²: the three sp² hybrid orbitals lie in one plane and point towards the corners of an equilateral triangle, at 120° to each other.
sp³: the four sp³ hybrid orbitals point towards the corners of a regular tetrahedron, at 109.5° (109°28′) to each other.
Each hybrid orbital has one large lobe and one small lobe; the large lobe is used for bonding.
- 252 marks
Question 25
Describe the change in hybridisation (if any) of the Al atom in the following reaction.
Solve with AIWritten solution
In AlCl₃: Al (ground state 3s² 3p¹) is excited to 3s¹ 3p_x¹ 3p_y¹. These three orbitals undergo sp² hybridisation; the three sp² orbitals form three Al–Cl bonds, and AlCl₃ is trigonal planar. The 3p_z orbital of Al remains vacant.
In AlCl₄⁻: the Cl⁻ ion donates a lone pair into the vacant 3p_z orbital. Now one 3s and three 3p orbitals are involved, so Al undergoes sp³ hybridisation and AlCl₄⁻ is tetrahedral.
Hence the hybridisation of Al changes from sp² to sp³ (trigonal planar → tetrahedral).
- 262 marks
Question 26
Is there any change in the hybridisation of B and N atoms as a result of the following reaction?
Solve with AIWritten solution
Boron: yes, sp² → sp³. Nitrogen: no, it stays sp³.
- Before the reaction: in BF₃, B has 3 bond pairs and no lone pair; it is sp² hybridised (trigonal planar) and has a vacant p orbital. In NH₃, N has 3 bond pairs and 1 lone pair; it is sp³ hybridised (pyramidal).
- After the reaction: N donates its lone pair to the vacant orbital of B, forming a coordinate bond N→B. B now has 4 bond pairs, so it becomes sp³ hybridised (tetrahedral). N now has 4 bond pairs and no lone pair; it remains sp³ hybridised, and its geometry becomes tetrahedral.
- 275 marks
Question 27
Draw diagrams showing the formation of a double bond and a triple bond between carbon atoms in C₂H₄ and C₂H₂ molecules.
Solve with AIWritten solution
(a) Double bond in C₂H₄ (ethene)
Each C atom (excited state 2s¹ 2p_x¹ 2p_y¹ 2p_z¹) undergoes sp² hybridisation: one 2s and two 2p orbitals form three sp² orbitals in one plane at 120°, and one 2p orbital stays unhybridised, perpendicular to that plane.
- One sp² orbital of each C overlaps head-on with that of the other C to form the C–C σ bond.
- The other two sp² orbitals of each C overlap with the 1s orbitals of two H atoms to form four C–H σ bonds.
- The unhybridised 2p orbitals of the two C atoms overlap sideways to form a π bond, above and below the plane of the molecule.
So the C=C double bond consists of one σ bond and one π bond.

(b) Triple bond in C₂H₂ (ethyne)
Each C atom undergoes sp hybridisation: one 2s and one 2p orbital form two sp orbitals at 180°, and two 2p orbitals stay unhybridised, perpendicular to each other and to the molecular axis.
- One sp orbital of each C overlaps head-on with that of the other C to form the C–C σ bond.
- The second sp orbital of each C overlaps with the 1s orbital of an H atom to form a C–H σ bond.
- The two pairs of unhybridised 2p orbitals overlap sideways to form two π bonds in mutually perpendicular planes.
So the C≡C triple bond consists of one σ bond and two π bonds, and the molecule is linear.

- 282 marks
Question 28
What is the total number of sigma and pi bonds in the following molecules?
(a) C₂H₂
(b) C₂H₄
Solve with AIWritten solution
Every single bond is one σ bond; a double bond is one σ + one π bond; a triple bond is one σ + two π bonds.
(a) C₂H₂ (H–C≡C–H): two C–H bonds give 2 σ; the C≡C bond gives 1 σ and 2 π. Total: 3 σ bonds and 2 π bonds.
(b) C₂H₄ (H₂C=CH₂): four C–H bonds give 4 σ; the C=C bond gives 1 σ and 1 π. Total: 5 σ bonds and 1 π bond.
- 291 mark
Question 29
Considering x-axis as the internuclear axis, which out of the following will not form a sigma bond and why?
Solve with AIAnswer
(A) 1s and 1s
(B) 1s and 2p
- Correct
(C) 2p and 2p
(D) 1s and 2s
Option (C) is correct.
Explanation: A σ bond is formed by head-on (axial) overlap of orbitals along the internuclear axis, here the x-axis. The 2p orbitals lie along the y-axis, perpendicular to the internuclear axis, so two 2p orbitals can only overlap sideways (laterally). Sideways overlap forms a π bond, not a σ bond.
- (A) is wrong: s orbitals are spherical, so 1s and 1s overlap along the axis and form a σ bond.
- (B) is wrong: the 2p orbital points along the x-axis, so it overlaps head-on with 1s to form a σ bond.
- (D) is wrong: 1s and 2s are both spherical and overlap along the axis to form a σ bond.
- 305 marks
Question 30
Which hybrid orbitals are used by carbon atoms in the following molecules?
(a) CH₃–CH₃
(b) CH₃–CH=CH₂
(c) CH₃–CH₂–OH
(d) CH₃–CHO
(e) CH₃COOH
Solve with AIWritten solution
A carbon atom with four single bonds is sp³ hybridised; a carbon with one double bond (C=C or C=O) is sp² hybridised.

(a) CH₃–CH₃: both C atoms have four single bonds: sp³, sp³.
(b) CH₃–CH=CH₂: C1 (CH₃) is sp³; C2 and C3, joined by the double bond, are sp².
(c) CH₃–CH₂–OH: both C atoms have only single bonds: sp³, sp³.
(d) CH₃–CHO: C1 (CH₃) is sp³; C2 (the CHO carbon, with C=O) is sp².
(e) CH₃COOH: C1 (CH₃) is sp³; C2 (the COOH carbon, with C=O) is sp².
- 313 marks
Question 31
What do you understand by bond pairs and lone pairs of electrons? Illustrate by giving one example of each type.
Solve with AIWritten solution
Bond pair: a pair of electrons shared between two atoms in a covalent bond. It is attracted by both nuclei.
Example: CH₄. C has 4 valence electrons and shares one with each of four H atoms, giving 4 bond pairs and no lone pair. The four bond pairs repel equally, so CH₄ is regular tetrahedral (109.5°).

Lone pair: a pair of valence electrons that is not shared with another atom. It belongs to one atom only.
Example: H₂O. O has 6 valence electrons; two are used in the two O–H bonds (2 bond pairs) and the other four remain on O as 2 lone pairs.

Lone pairs repel more strongly than bond pairs (lp–lp > lp–bp > bp–bp), so the two lone pairs in H₂O push the O–H bonds closer together; H₂O is bent with an H–O–H angle of 104.5°.
- 323 marks
Question 32
Distinguish between a sigma and a pi bond.
Solve with AIWritten solution
The two types of covalent bond differ as follows:
Sigma (σ) bond Pi (π) bond Formed by end-to-end (head-on) overlap of orbitals along the internuclear axis. Formed by sideways (lateral) overlap of p orbitals perpendicular to the internuclear axis. Can be formed by s–s, s–p or p–p (and hybrid) orbitals. Formed by sideways overlap of unhybridised orbitals whose axes are parallel (in the molecules studied here, p–p overlap); hybrid orbitals do not form π bonds. Electron density is concentrated between the nuclei, symmetrical about the internuclear axis. Electron density lies in two lobes, above and below the internuclear axis. Overlap is large, so the bond is stronger. Overlap is smaller, so the bond is weaker. Free rotation about a σ bond is possible. Rotation about a π bond is restricted. Can exist alone (a single bond is a σ bond). Is always formed in addition to a σ bond, in a double or triple bond. - 333 marks
Question 33
Explain the formation of H₂ molecule on the basis of valence bond theory.
Solve with AIWritten solution
Consider two hydrogen atoms A and B, with nuclei N, N and electrons e, e.
When the atoms are far apart, there is no interaction between them. As they approach each other, new forces arise:
- Attractive forces: nucleus of one atom and its own electron (N–e, N–e), and nucleus of one atom and the electron of the other (N–e, N–e).
- Repulsive forces: between the two electrons (e–e) and between the two nuclei (N–N).
Experimentally, the new attractive forces are stronger than the new repulsive forces, so the atoms come closer and the potential energy decreases. Finally a stage is reached where the net force of attraction balances the force of repulsion and the energy is minimum. At this point the 1s orbitals of the two atoms overlap, the electron pair is shared, and the H₂ molecule is formed.
The internuclear distance at this minimum is the bond length of H₂ (74 pm), and the energy released, 435.8 kJ mol⁻¹, is the bond enthalpy. Bringing the nuclei still closer makes the energy rise sharply because of repulsion.
- 343 marks
Question 34
Write the important conditions required for the linear combination of atomic orbitals to form molecular orbitals.
Solve with AIWritten solution
(a) Similar energy: the combining atomic orbitals must have the same or nearly the same energy. For example, 1s can combine with 1s, but not with 2s, whose energy is much higher.
(b) Same symmetry about the molecular axis: the combining orbitals must have the same symmetry about the molecular axis (taken as the z-axis). For example, 2p of one atom can combine with 2p of the other, but not with 2p or 2p.
(c) Maximum overlap: the combining atomic orbitals must overlap to the maximum extent. The greater the overlap, the greater the electron density between the nuclei in the bonding molecular orbital.
- 352 marks
Question 35
Use molecular orbital theory to explain why the Be₂ molecule does not exist.
Solve with AIWritten solution
Be (Z = 4) has the configuration 1s² 2s², so Be₂ would have 8 electrons. Its molecular orbital configuration would be:
Number of bonding electrons ; number of antibonding electrons .
A bond order of zero means the stabilising effect of the bonding electrons is exactly cancelled by the destabilising effect of the antibonding electrons. There is no net bonding between the two atoms, so the Be₂ molecule does not exist.
- 365 marks
Question 36
Compare the relative stability of the following species and indicate their magnetic properties:
O₂, O₂⁺, O₂⁻ (superoxide), O₂²⁻ (peroxide)
Solve with AIWritten solution
For O₂ and its ions the molecular orbitals fill in the order (NCERT):
Writing KK for the filled core:
O₂⁺ (15 electrons): KK
O₂ (16 electrons): KK
O₂⁻ (17 electrons): KK
O₂²⁻ (18 electrons): KK
Bond order , counting all electrons ( in each species):
Species Bond order Unpaired electrons Magnetic nature O₂⁺ 10 5 2.5 1 paramagnetic O₂ 10 6 2 2 paramagnetic O₂⁻ 10 7 1.5 1 paramagnetic O₂²⁻ 10 8 1 0 diamagnetic Stability increases with bond order, so the order of stability is:
O₂⁺, O₂ and O₂⁻ are paramagnetic; O₂²⁻ is diamagnetic.
- 372 marks
Question 37
Write the significance of a plus and a minus sign shown in representing the orbitals.
Solve with AIWritten solution
An orbital is described by a wave function (). The plus and minus signs on the lobes of an orbital show the sign (phase) of the wave function in that region; they do not represent positive or negative charges.
The signs matter when orbitals combine: overlap of lobes with the same sign (in phase) leads to constructive interference and forms a bonding molecular orbital, while overlap of lobes with opposite signs (out of phase) leads to destructive interference and forms an antibonding molecular orbital.
- 385 marks
Question 38
Describe the hybridisation in case of PCl₅. Why are the axial bonds longer as compared to equatorial bonds?
Solve with AIWritten solution
Hybridisation: the ground-state valence configuration of P (Z = 15) is 3s² 3p³.

In the excited state, one 3s electron is promoted to a vacant 3d orbital, giving five half-filled orbitals: 3s¹ 3p³ 3d¹.

These five orbitals (one 3s, three 3p, one 3d) hybridise to give five sp³d hybrid orbitals, each with one electron. Each overlaps with a singly occupied 3p orbital of a Cl atom to form five P–Cl σ bonds; in the diagram each shared pair contains one electron from P and one from Cl.

The five sp³d orbitals point to the corners of a trigonal bipyramid: three equatorial P–Cl bonds lie in one plane at 120° to each other, and two axial bonds lie above and below this plane, at 90° to it.
Why the axial bonds are longer: each axial bond pair is at 90° to three equatorial bond pairs, while each equatorial bond pair is at 90° to only two axial bond pairs (the other two equatorial pairs are at 120°). So the axial bond pairs suffer more repulsion from the other bond pairs. As a result, the axial bonds are slightly longer, and therefore slightly weaker, than the equatorial bonds.
- 392 marks
Question 39
Define hydrogen bond. Is it weaker or stronger than the van der Waals forces?
Solve with AIWritten solution
Hydrogen bond: when a hydrogen atom is covalently bonded to a highly electronegative atom (F, O or N), the bond is strongly polar and H carries a partial positive charge. The weak attractive force that binds this hydrogen atom of one molecule to the electronegative atom (F, O or N) of another molecule, or of the same molecule, is called a hydrogen bond. It is shown by a dotted line, e.g. .
Hydrogen bonds are stronger than van der Waals forces. A hydrogen bond is an especially strong dipole–dipole attraction, because the small H atom carries a large partial positive charge and can approach the electronegative atom very closely. It is, however, much weaker than a covalent bond.
Hydrogen bonds are of two types:
(a) Intermolecular hydrogen bond: between different molecules of the same or different compounds, e.g. in water and in hydrogen fluoride.

(b) Intramolecular hydrogen bond: within the same molecule, between H and an electronegative atom present in that molecule, e.g. in o-nitrophenol.

- 405 marks
Question 40
What is meant by the term bond order? Calculate the bond order of: N₂, O₂, O₂⁺ and O₂⁻.
Solve with AIWritten solution
Bond order is one half of the difference between the number of electrons in bonding molecular orbitals () and in antibonding molecular orbitals ():
A positive bond order means the molecule is stable; bond orders 1, 2 and 3 correspond to single, double and triple bonds. The higher the bond order, the greater the bond enthalpy and the shorter the bond.
Writing KK for :
(a) N₂ (14 electrons): KK
, ; bond order
(b) O₂ (16 electrons): KK
, ; bond order
(c) O₂⁺ (15 electrons): one electron fewer in π* than O₂: KK
, ; bond order
(d) O₂⁻ (17 electrons): one electron more in π* than O₂: KK
, ; bond order
What Class 11 Chemistry Ch 4 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Chemical Bond
- 02Octet Rule
- 03Lattice Enthaply And Bond Parameters
- 04VSEPR Theory
- 05Valence Bond Theory And Hybridisation
- 06Molecular Orbital Theory
- 07Hydrogen Bond
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 4 before.
Class 11 Chemistry Ch 4 questions students ask
How many questions are there in Class 11 Chemistry Ch 4?
40 questions. Every one is solved step by step on this page.
Are these Class 11 Chemistry solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 11 Chemistry Ch 4 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
