(a) At the edge of the drop, the forces along the solid surface balance:
Slacosθ+Ssl=Ssa⇒cosθ=SlaSsa−Ssl=0.0720.110−0.074=0.5⇒θ=60∘
(b) With the coating,
cosθ′=0.0720.110−0.146=−0.5⇒θ′=120∘
Before coating, θ is acute (Ssl<Ssa): the liquid wets the surface and the drop spreads into a low, flattened shape. After coating, Ssl>Ssa, so the solid–liquid interface costs more energy than the bare solid surface; θ is obtuse and the liquid does not wet the surface. The drop pulls itself up into a rounded bead, touching the solid over a small area, rolls off easily when the surface is tilted, and would be depressed in a narrow tube of this material. Such coatings are used for waterproofing raincoats and tents.
(c) Now
cosθ=SlaSsa−Ssl=0.0400.110−0.050=1.5
No angle has a cosine greater than 1, so no edge position can balance: even at θ=0 the pull of the bare solid surface, Ssa, exceeds Sla+Ssl=0.090 N m−1. The drop has no equilibrium shape and spreads out completely into a thin film over the surface. This is how a detergent makes water wet surfaces and fabrics thoroughly.