(a) A soap bubble has two surfaces, so the excess pressure is 4S/r:
ΔP1=0.0104×0.025=10 Pa,ΔP2=0.0304×0.025=3.3 Pa
The smaller bubble has the larger excess pressure.
(b) When the tap is opened, air flows from the higher pressure (small bubble) to the lower pressure (large bubble). As the small bubble loses air its radius falls, so its excess pressure 4S/r rises further, and air flows out of it even faster. Meanwhile the large bubble grows and its pressure falls slightly. The process feeds on itself: the small bubble shrinks and the large one grows. This is the opposite of what one might expect from two balloons.
(c) The small bubble shrinks until only a curved cap of film is left across the end of its tube. As the cap becomes flatter than a hemisphere, its radius of curvature increases again. The flow stops when the radius of curvature of this cap equals the radius of the (now slightly larger) big bubble, because then the excess pressures on the two sides are equal.