In a lab demonstration, glycerine (viscosity ) fills the 2.5 mm gap between a fixed glass plate and a parallel glass plate above it. A straight vertical line of dye is drawn across the glycerine from one plate to the other. The top plate is then pulled sideways at a steady speed, and the dye line tilts: in 2.0 s its top end moves 4.0 cm while its bottom end stays where it was. The flow is laminar. What shearing stress is needed to keep the top plate moving?
Competency-Based Questions (CBQ) · Question 12 of 80
In a lab demonstration, glycerine (viscosity 0.83 Pa s ) fills the 2.5 mm gap between a fixed glass plate and a…
Question 121 markMCQMedium
Select your answer
(A)
- Correct answer
(B)
(C)
(D)
Option (B) is correct.
Explanation: The top of the dye line moves with the top plate, at speed
The bottom stays at rest with the fixed plate, so the rate of shearing strain (the velocity gradient across the layer) is
The viscosity is the ratio of the shearing stress to the rate of shearing strain, so
(A) is wrong: it uses the shearing strain after 2.0 s () instead of the rate of shearing strain. For a fluid the stress depends on how fast the strain changes.
(C) is wrong: it takes the gap as 2.5 cm instead of 2.5 mm.
(D) is wrong: it divides the viscosity by the rate of strain instead of multiplying.
