Option (D) is correct.
Explanation: Each cable makes an angle θ with the horizontal, where
sinθ=3.01.2=0.40
By symmetry the two tensions are equal. Their horizontal components cancel, and their vertical components together support the weight:
2Tsinθ=mg⇒T=2×0.4040×9.8=490 N
Each cable carries more than the whole weight (392 N), because it pulls mostly sideways. The stress is 490/(4.0×10−6)=1.23×108 N m−2, about half the yield strength of steel (250 MPa, Table 8.1), so Hooke's law applies:
ΔL=AYTL=4.0×10−6×2.0×1011490×3.0=1.84×10−3 m=1.84 mm
The stretch is far too small to change the angle noticeably.
(A) is wrong: 0.735 mm takes each cable to carry half the weight, 196 N, as if the cables hung vertically.
(B) is wrong: 3.68 mm comes from Tsinθ=mg, forgetting that the two cables share the weight, which gives T=980 N.
(C) is wrong: 0.802 mm uses cosθ=0.917 in place of sinθ, resolving the tensions along the wrong direction (T=214 N).