Option (A) is correct.
Explanation: The net force F1−F2=5.0 kN accelerates the whole rod, of mass M: a=(F1−F2)/M. Take a section at a distance x from the end pulled by F2. The part of the rod between that end and the section has mass Mx/L and the same acceleration, so the tension T(x) there satisfies
T(x)−F2=LMxa=(F1−F2)Lx⇒T(x)=F2+(F1−F2)Lx
The tension rises linearly from 1.0 kN at one end to 6.0 kN at the other. At the midpoint it is the average, 3.5 kN:
σmid=1.0×10−43.5×103=3.5×107 Pa
Because the tension is linear in x, the total extension is the same as for a uniform tension equal to the average, (F1+F2)/2:
ΔL=2AY(F1+F2)L=2×1.0×10−4×2.0×10117.0×103×2.0=3.5×10−4 m=0.35 mm
(B) is wrong: it uses the larger force, 6.0 kN, all along the rod; that tension exists only at the end where it is applied.
(C) is wrong: it uses the net force, 5.0 kN, as the tension; the net force decides the acceleration, not the tension at any section.
(D) is wrong: the stress is right, but 0.70 mm uses the sum F1+F2 instead of its average.