(a) On edge: b=0.10 m, d=0.20 m.
δedge=4×0.10×0.203×13×1092000×3.03=4.16×10754000=1.30×10−3 m
Sag on edge =1.30 mm.
(b) Flat: b=0.20 m, d=0.10 m.
δflat=4×0.20×0.103×13×1092000×3.03=1.04×10754000=5.19×10−3 m
Sag when flat =5.19 mm.
(c)
δedgeδflat=bfdf3bede3=0.20×0.1030.10×0.203=2.0×10−48.0×10−4=4
The flat beam sags 4 times as much. It is the same piece of wood, but the sag depends on d3 and only on b to the first power, so putting the larger dimension vertical (as the depth) is far more effective. The builder should lay the beam on its edge. (The beam must then be braced sideways so that it does not tip over or buckle.)