(a) The springs must always work in the elastic region, below the yield point (elastic limit) B, and preferably in the linear region OA where Hooke's law holds, so that the spring force is proportional to the compression. Below B, the steel returns to its original length when the load is removed. If a spring were loaded beyond the yield point, it would take a permanent set: when unloaded, it would stay shorter than before, the car would ride lower, and the spring would no longer behave as designed.
(b) In a ductile material, the ultimate tensile strength point D and the fracture point E are far apart, so the material undergoes a large plastic deformation before it breaks. As it deforms plastically under large forces, it absorbs a large amount of the car's kinetic energy, and it slows the car over a larger distance, reducing the force on the passengers. A brittle material would crack and break almost as soon as it reached its maximum stress, absorbing very little energy, and the car would be stopped much more abruptly.
(c) In the collision, the steel of the crumple zone was stressed beyond its yield point, into the plastic region. When the load was removed, it did not retrace the stress–strain curve; it kept a large permanent set. The deformation is plastic, not elastic, so the part cannot return to its original shape and cannot absorb energy in the same way again; it must be replaced.