Option (D) is correct.
Explanation: At the yield point the strain is εy=σy/Y, and the extension of a 1.0 m wire is εy×1.0 m. The cross-sectional area does not matter, since the stress is fixed at σy.
Al: 70×10995×106=1.36×10−3,Cu: 110×109200×106=1.82×10−3
wrought iron: 190×109170×106=8.9×10−4,steel: 200×109250×106=1.25×10−3
The largest is copper's, so the copper wire stretches the most, by 1.82 mm. What matters is the ratio of strength to stiffness, not either one alone.
(A) is wrong: steel has the largest yield strength, but it is also the stiffest, so its strain at yield (1.25×10−3) is smaller than copper's.
(B) is wrong: aluminium has the smallest Young's modulus, but its yield strength is so low that it yields at a strain of only 1.36×10−3.
(C) is wrong: wrought iron has the smallest strain at yield of the four, because it is very stiff yet has a modest yield strength.