A surveyor uses a steel measuring tape 30 m long, whose cross-section is 12 mm wide and 0.20 mm thick. The tape is marked correctly when it lies slack, but in use it is pulled straight with a force of 50 N. Young's modulus of steel is (Table 8.1). By how much does the 30 m tape stretch, and what is the effect on a 30 m measurement?
Competency-Based Questions (CBQ) · Question 14 of 80
A surveyor uses a steel measuring tape 30 m long, whose cross-section is 12 mm wide and 0.20 mm thick.
- Correct answer
(A) It stretches by , so the reading is about 3 mm less than the true distance
(B) It stretches by , which has no noticeable effect
(C) It stretches by , which is negligible for a 30 m tape
(D) It stretches by , so the reading is about 3 mm more than the true distance
Option (A) is correct.
Explanation: The cross-sectional area of the tape is
When stretched, the marks on the tape move apart, so a true distance of 30.0031 m lies between the 0 and 30 m marks. The tape then reads about 3 mm less than the true distance. For precise surveying this is significant, so tapes are used at a standard pull, or the stretch is corrected for.
(D) is wrong: the size is right, but stretching spreads the marks apart, so the tape under-reads rather than over-reads.
(B) is wrong: is the strain, a pure number, not the stretch; it must be multiplied by the length of 30 m.
(C) is wrong: it takes the area as , ten times too large, by converting the 0.20 mm thickness wrongly.
