Option (B) is correct.
Explanation: Hooke's law holds while the extension is proportional to the load. From 0 to 40 N, each extra 10 N adds exactly 0.51 mm, so the points lie on a straight line through the origin. At 50 N the extension would be 5×0.51=2.55 mm if the law still held, but it is 2.90 mm, well above the line. So the readings show Hooke's law holding up to 40 N (the proportional limit lies somewhere between 40 N and 50 N).
Within the linear region, the extension per newton is 402.04=0.051 mm N−1, so
ΔL15=15×0.051=0.765 mm≈0.77 mm
As a check, the stress at 50 N is π(0.25×10−3)250=2.5×108 N m−2, about the yield strength of steel, which is why the wire stretched more than proportionally.
(A) is wrong: the 50 N reading does not lie on the straight line, so Hooke's law is not obeyed up to 50 N.
(C) is wrong: it scales from the 50 N reading (15×2.90/50), which lies outside the linear region.
(D) is wrong: both the range and the scaling use the 50 N reading, which is not on the straight line.